BATCH SPLIT in Order Delivery and PGI (SD)

Hi
Could anybody tell me the following:
1) What is the concept of Batch Split?
2) How it is shown when a Delivery Order is created?
3) How it afftects when Goods Issue is done?
4) How can we calculate the total delivery quantity when there is a Batch Split?
Thanks!

ok

Similar Messages

  • While creating sales order I am getting  Sanctioned party list blocked  but I am able to create delivery, and PGI

    Dear GTS Experts,
    While creating sales order I am getting  Sanctioned party list blocked, but I am able to create delivery, and PGI.
    Where Is the wrong ?
    Thanks a lot
    Venu gopal

    Dear Venu
    Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
    Please let me know if any further inputs required.

  • FM or BAPI for Delivery Order Picking and PGI

    Good day,
    I would like to check with you all on any function module or BAPI which can perform delivery order picking and PGI ?
    I did some research and found that a lot of people is introducing this FM "WS_DELIVERY_UPDATE_2"
    but i'm not sure how this FM works. Can anyone provide some information for me on this function like what data to propagate into this FM and etc... ?

    hi,please check this link.
    Need to update picking,packing and PGI using FM "WS_delivery_update"
    also,
    for picking:  WS_DELIVERY_UPDATE_2
    pgi :  BAPI_GOODSMVT_CREATE
    thanks.

  • Delivery and PGI

    Hi Gurus,
    Can any one help me in this regard. what is Exactly difference between Delivery and PGI? As well as explain me in functional.
    Thanks in advance.
    Regards
    Dwaraka

    Dear Dwarak,
    the creation of delivery means that you create the delivery document but there is no goods movement yet. After creation of delivery the requirements of the sales order will be removed from the sales order to the delivery, but the goods are still on your plant. The delivery has its own availability check (whoch works on other levels than in the order, for example you can do ATP-check on the batch level). oreover during delivery you can pack your material via Handling Units. There are also some other processes which are running during creation of the delivery.
    The last process is the book of the goods issue. At this moment there is a real goods movement, requirements of delivery will be deleted and the goods leave the plant.
    You have a possibilioty to finish a delivery process by a normal goods issue (with the goods movement), but you can do it also by another way (confirm service), of you deliver not the reals goods, but, for example, you deliver a service.
    I hope, this explanation will help you a little bit further in understanding the delivery process.
    Kind regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • Outbound delivery and pgi without sufficent stock

    Hi,
    I would like to know few things regarding.
    1. Can we process outbound delivery and PGI without having sufficent stock.
    2.if yes than what will be the status of document flow.(when i did it system showed  following message, sales order-being processed,outbound delivery-being processed, and conformaton of service-completed.
    3.if we can not do pgi and delivery without sufficent stock than what is alternative for the same.
    Kindly reply as soon as possible.
    Thnaks
    Rahul

    1)  Yes.  It is based on your item category like TAX, you can post the goods issue and system will not check for stock availability.  It is also subject to other parameters like
    a) ticking the Negative stock field in material master
    b) ticking the box for your Valuation area in OMJ1 etc
    2)  As I said above, if you use item category TAX and do PGI, then in document flow, you can see Confirmation of Service against this delivery document
    3)  Stock should be made available
    thanks
    G. Lakshmipathi

  • Create STO,Delivery and PGI delivery from an interface

    Hi,
    We are using a third party WMS system to manifest and ship orders froma  distribution center to a store. The only data that is going to come into SAP is the Bill of Lading as to how much has shipped for a material to the store from the DC. This has to drive a Stock transport order cycle of creating an STO, create and PGI delivery. As we are building the interface,  I am a bit confused as to how we can make all this happen from one data feed.  Since there is only one feed and it has to trigger mutliple processes should we trigger multiple idocs (different types) to trigger the STO creation, create the delivery and PGI it (Delivery 03 idoc)?
    Will it be too cumbersome to build all this logic in the interface?
    Another option would be to create the STO using the feed, then run VL10B in a given time interval (Background) to create the delivery.
    However, I am not 100% sure how you can spawn off a PGI job? Even if I were to run the VL02n program in the background how can I populate the pick quantity?
    Any insight would be very useful.
    Thanks..

    My assumption is just you need to adopt delivery qty as pick qty.You are not doing any TR ,TO as your ware house is third party managed.
    you need to define the picking form EKOO to your shipping point type and then the quontity will copy
    You can do it in the difintion of the shipping point, you have to difine send time = 4
    I will explain how need to  set up this automatic picking, and then you can
    work backwards from there. The automatic picking you are experiencing
    is actually related to the output type EK00 assigned to your shipping
    point.
    Consider the following two setup steps which will result is automatic
    picking:
    Set the output type to EKOO, in the print picking list of the shipping
    point in customizing.
    Make sure the parameters below are set:
    Message Language
    Number of Messages
    Send Time <<<<<<<<<<< this must be set to 4 (send immed)!!
    Transmission Medium
    1) you have to set the parameters for EK00 in the shipping-point-
    maintenance in customizing:
    -> Enterprise Structure
    -> Definition
    -> Logistics Execution
    -> Define, copy, delete, check shipping point
    2) as second step you define the shipping-print-parameters in
    customizing:
    -> Logistics Execution
    -> Shipping
    -> Basic Shipping Functions
    -> Output Control
    -> Define print parameters shipping
    -> Shipping (Spec.case)
    Therein there should be an entry for every shipping-point, where
    you like to use the picking-list EK00!
    If you have 1 & 2 setup for a particular shipping point you will
    experience the "automatic" picking of deliveries.
    and finally picking storage  location determined as per storage conditions maintained in material master.

  • Sales order, Delivery and Billing document creation

    Hello Experts,
    I am working on credit management and am in need of creating sales order, delivery and billing document.
    Can some one send me the screen shots or any doc which outlines order,delivery and billing document creation.
    Will award points definitely.
    Also what are the t.codes for these creation?
    Regards,
    Sriram

    Order Create:
    Transaction VA01
    Give the order type , If standard order use OR or ZOR, which ever is maintained
    Then give the sold to and press enter
    In the Items screen Give the material and quantity and press enter. This should be enough to create an order, if u need u can give order reasons...etc. Then save the Order. Note down the order number.
    Go to VL01N-
    and give the above order for which u are doing delivery, In the pick quantity enter the amount in the order and press enter. and make sure the delievry date should be the same in the Sales Order Schedule line- REquested delivery date. Save the document.Note down the document number
    Go to VL02N - Open the above delivery document and click on PGI - done
    Now go to VF01 and this should bring up the delivery document number., If it doesnt , give the delivery document number and hit enter. then save the document. Billing is done.
    Regards
    Sai

  • Batch Split on a delivery

    Hi All,
    Can someone explain what batch split on the delivery means and how it works . Why is it used?
    Thanks,
    Sandeep.

    Hi,
    You can just search the forum or help.sap.com documentation for details.
    For example, Check the SAP link [Executing Batch Splits in Deliveries|http://help.sap.com/saphelp_47x200/helpdata/en/dd/560cd0545a11d1a7020000e829fd11/frameset.htm]
    Regards

  • DELVRY01 to preform both Delivery and PGI

    Hi All,
    Can i use the basic type DELVRY01 to do both Delivery and PGI.
    If yes, what additional inputs i need to provide.

    hello again.
    the 15/02 line item remains open because it was not copied into your delivery document.  what you entered in the delivery, the system interpreted as a manual entry and not as an item from your order.
    despite the order giving a schedule line of 15/02, you were still able to enter the same material in your delivery manually.  this could be because of the availability of stocks which have not been reserved for other orders.  if there are enough stocks, you will be able to post goods issue (you can even specify goods issue date, within the opened posting period).  the 'complete' status of picking and goods issue refer only to the delivery document and not of the items in the order.
    the system also treats your manual entry as a sort of 'overdelivery', meaning this is in addition to your order quantities.  despite your manual entry, the system will still bill your customer based on actual deliveries.  overdelivery is allowed unless you prohibit this in configuration and perhaps copy control.
    for you to complete the status of the sales order, you need to either reject the 15/02 item, or to create another delivery with reference to the order but this time specifying 15/02 as delivery date.
    hope this helped you.
    regards.
    Edited by: jonathan yap on Feb 14, 2008 11:45 AM

  • In BI SD how to get Sales Document wise Order Delivery and balance Quantity

    We are on the verge of SAP BI implementation. We are facing a problem as in BI we have to
    show Sales Order wise - Order Quantity then associated all the deliveries and the Quantity delivered
    and finally Billed Quantity
    Format Required is
    Order No         Order Qty      Delivery Qty     Billed Qty
    We are using 0sd_c03 cube here Order , delivery and Billing come as separate Line items
    Now bringing them to one line item is a chellange for us
    can any body help us
    Thanks
    Shivani

    Hi,
    Merging of Order, delivery and billing information is not so easy.
    In ECC we have a new datasource for Open order quntity against delivery available check those datasources once may be useful.
    [Extraction SD Sales: Order Delivery|http://help.sap.com/saphelp_nw04/helpdata/en/21/ca6d07d5b807459ec8957dad97c179/frameset.htm]
    --> This datasouce provides information regarding order qty, delivered qty and status. But no billing related information available.
    --> Pull billing information into a separate datasource and merge using sales doc no (with reference doc no in billing). to get billing related info.
    --> Multiple orders can be billed together, so distribution may not be correct. check ...
    Hope it helps
    Srini

  • Quality certficates for batch split items in delivery

    Hi Masters
       How to make the output determination for outgoing quality certificates to select the output type LQCB
    for batch split items in Delivery.
    What is the routine to be selected in the output determination to map this scenario?
    Regards
    Mohan

    Hi Masters
            My problem is When i create a delivery for the items with batch split, the output type LQCB is not determined ie., not automatically get assigned in the delivery item.Hence the delivery items are not listed while executing T code QC20/
    What am I missing?
    -mohan

  • Sales order, Delivery and Invoice changes history tables

    Dear All,
    I want to know how to find out the changes done in Sales Order, Delivery and Invoice.
    As far as sales order is concerned, I know CDHDR and CDPOS are tables can be used to find out the changes.
    But I am not sure about the "Object ID". Where we need to find out this Object ID?
    In the Data element "VBELN_VA" "Change Document" option has been checked under "Further Characteristics" tab.
    Please confirm about the "Object ID".
    Similarly give inputs for Delivery and Invoice change history also.
    Regards,
    Mullairaja

    Hi,
    Could you please explain, how to use these programs?
    Regards,
    Mullairaja

  • Urjent-Any function module for finding Sales order, Delivery and Invoic

    Hi Experts,
    I am having selection screen like
    Sales order
    Delivery
    Invoice
    Customer
    If i give sales order
             Delivery and Invoice should pull
    If i give delivery
             sales order and Invoice should pull
    If i give Invoice
             sales order and delivery should pull
    If i give customer
               all customer related data should pull
    Do we have any function modules to meet this reqirement?
    If we have please provide function modules.
    Thanks,
    mahe
    Edited by: Rob Burbank on Mar 30, 2009 4:17 PM
    Edited by: mahahe on Mar 31, 2009 9:12 PM

    You can use VBFA table, right? in the FM also, you can find the same logic, like pulling from VBFA table.
    thanq

  • Batch nos for particular Delivery and line item no

    Hi Gusy,
    I am developing a report, which i need to display the Delivery and item no and batch detail for respective delivery and item. Is any table or function module, if I pass the Delivery and Item no to get the details
    Ex: Delivery "80909080" and item "000010",
    Thanks,
    Gourisankar.

    Hi,
    Check the table LIKP...You can pass the delivery number and item number to get the material and batch.
    Once you get the batch number and material number , you can use BAPI_OBJCL_GETDETAIL , to get the batch characteristcis.
    Regards,
    Nagaraj

  • BATCH SPLIT AUTOMATIC STORAGE LOCATION AND WEIGHT DETERMINATION IN DELIVERY

    DEAR,
    PLZ SUGGEST ME HOW TO DO CONFIGURATION IN BATCH DETERMINATION SUCH THAT WHILE DOING BATCH SPLIT WHEN I PUT THE BATCHES MANUALLY THE STORAGE LOCATION  AND ITS SPECIFIC WEIGHT WILL COME AUTOMATICALLY .
    REGARDS,
    DEBESH TRIPATHY

    Hi ,
    You have to use the user exit as mentioned by lakshmipathi above  and take the help of ababer to modify it.
    V02V0002   - User exit for storage location determination 
    Also go through this link for user exit for delivery
    http://www.sap-img.com/abap/list-of-user-exit-related-to-vl01n.htm
    Regards,
    Krishna O

Maybe you are looking for