BDC options for recording
Hi all gurus!
When we go to SHDB, we have 4 options to set - Default Window, Don't end recording after commit, simulate background mode and "No BDC mode".
I guess I am aware of the meaning of No bdc mode -> which probably means that SY-BINPT will be SPACE if I set it to X.
No end of BDC after commit is also obvious that it will not end BDC after COMMIT. But when should we set it while recording?
What is SIMULATE background mode? Does it mean SY-BATCH is set to 'X"? When we run BDC in session mode, is Sy-batch set to 'X'? Should we set this parameter or not? This is not clear.
Also, in what scenarios should we check Default window?
My understanding is that it should not matter how we set the parameters while recording. Important thing is we should code in similar manner. So whatever was set while recording, same should be set while coding in CTUPARAMS. Is it correct?
Thanks in adv !
Check the following thread
Recording Options for SHDB
Similar Messages
-
FILMING WITH REBELT31, OPTIONS FOR RECORDING IN LOW LIGHT.
Hi there everyone. My question is that I want to know about a lenses that supports me good definition and quality in low light conditions. I am recording with a Rebel t3i. Thanks in advance.
bebefle_89 wrote:
This is my first DSLR and I am recording weddings and parties. For the nature of these events, most of them have low light conditions. I also need advice of a gadget to record everything without changing SD cards. Thanks.
The solution is a bigger (higher capacity) SD card. =) They go up to 64gb and 128gb now which should provide A LOT of recording capacity.
bebefle_89 wrote:
At the time, I've been working just with the 18-55 (the one that comes with the camera package), but I need an aditional lense because this lense I have, is graining all my videos because of the adjustment of ISO.
How much do you understand about f-stops, shutter speed, and ISO? What exposure settings are you using now for your videos? In short, you need a lens that can open up to a larger aperture (such as f/1.8, f1.4 or f1.2).
Here are some guides that will be helpful in explaining these concepts for you:
http://www.exposureguide.com/exposure.htm
http://www.makethephoto.com/articles/how-to-make-the-jump-from-automatic-shooting-to-manual-shooting -
Audition seems to have updated its layout and options for recording..
i am no longer able to record while hearing the playbacc in both sides of tha headphones. uggh i just finally figured all this stuff out and now its changed and unable to record....
I think you're going to have to provide more information. Describe how you set up record in Audition. What happens exactly when you try it? Error messages?
-
Hey all,
Please could someone explain what all the different options for recording BDC in SHDB are. In specific I'm interested in knowing what the CATT mode (No CATT, CATT with individual screen control & CATT without individual screen control) and the Simulate Background Mode options do.
Thank you
Tim.hi,
Check this link
http://www.sap-img.com/sap-catt.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pf
Usually from what I have seen CATT is not used for regular transactions in the productive environment. I have only seen LSMW used for the transfer of data from non-SAP systems to SAP systems. It guides you thru your data migration tasks.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e21017408e11d1896b0000e8322d00/content.htm
- SAP advise not to use CATT in productive systems.
http://www.planetsap.com/basis1.htm
- Start of CATT processes allowed: This option determines whether you want to allow the CATT (Computer Aided Test Tool) process in the client or not. Computer Aided Test Tool (CATT) is tool provided by SAP to test different functionality of the SAP system. To run the CATT tool you can execute transaction SCAT. CATT process changes the database extensively and requires lot of system resources. So we recommend not to chose this option if you are in the production environment.
There has also been some comments on LSMW on this forum:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D37272%26tstart%3D135
- The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
My 2 cent would be why not develop a solution using Batch Input, BAPI etc?
Check these links
http://help.sap.com/saphelp_nw04/helpdata/en/48/c521a8f6ec11d2bdde080009b4534c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/frameset.htm
http://www.thespot4sap.com/Articles/CATT.asp
http://www.sap-img.com/sap-catt.htm
it is one of the option for call transaction
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/e21481408e11d1896b0000e8322d00/frameset.htm
http://www.sd-solutions.com/documents/SDS_CATT.html
Please check this online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf -
Audio interface for recording 2 tracks at once
What are my Audio Interface options for recording two tracks at once on my Macbook? What have you had success with?
ThanksI'm sure you will get numerous recommendations - what you want really is an Apogee Duet... it's the best thing you'll find for the price and it sounds great...
I use an Edirol FA-66 with a MacBook with no problems at all, except it sounds a bit "thin"...
Over to the rest of you... -
Hi gurur's in BDC for recording other than SHDB any process is there
hi gurur's in BDC for recording other than SHDB any process is there
Hi,
I think as such there is no other process. You can do the recording through transaction SM35 as well, go there and click on new recording. You can do the recording this way also but this is not different from SHDB.
Reward if this clarifies your doubt.
Regards,
Lalit Kabra -
Missing "Add Records" and "Refresh Records" options for data sets post domain re-import
We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled. -
Options for Displaying Reference Attribute in AdvancedTable Record
Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank youIf UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly. -
Hi,
I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?KevinIf it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.
-
How to create a BDC program for given recording.
i have to create a BDC program for uploading a file.
currently i am using call function
CALL FUNCTION 'F4_FILENAME'just check out the code below it is for updating two transactions
types Declaration *
types: begin of t_tab1 ,
vendor(10),
material(18),
pur_org(4),
wglif(18),
end of t_tab1.
Data Declaration *
data : begin of it_tab5 occurs 0,
vendor(10),
material(18),
end of it_tab5.
**DATA : BEGIN OF IT_TAB6 OCCURS 0,
VENDOR(10),
MATERIAL(18),
END OF IT_TAB6.
data: it_tab1 type standard table of t_tab1 with header line.
data: wa_tab1 type t_tab1.
data: wa_tab2 type t_tab1.
data: it_tab3 like bdcdata occurs 0 with header line.
data: it_tab4 like bdcdata occurs 0 with header line.
data: it_tab2 type table of bdcmsgcoll with header line.
data: d_file_name like ibipparms-path,
d_file_name1 type string.
Start-of-selection *
start-of-selection.
FM for finding the flat file
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = d_file_name.
d_file_name1 = d_file_name.
******FM for uploading data from flat file into internal table
call function 'GUI_UPLOAD'
exporting
filename = d_file_name1
filetype = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = it_tab5
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
End-of-selection *
end-of-selection.
sort it_tab5 by vendor.
loop at it_tab5.
perform bdc_dynpro using 'SAPLBG00' 0101 .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_dynpro using 'SAPLBG00' 1000 .
perform bdc_field using 'BDC_OKCODE' '=BUCH' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1101KOPF_1000'.
perform bdc_field using 'GBGMK-GAART' '2' .
perform bdc_field using 'GBGMK-GAERB' 'X' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1103TAB_SUB_1000'.
perform bdc_field using 'BDC_CURSOR' 'GBGMP-LSTNR(01)' .
perform bdc_field using 'GBGMP-LSTNR(01)' it_tab5-material .
call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2
refresh it_tab3.
wa_tab1-pur_org = 'ABCP'.
loop at it_tab2.
endloop.
perform bdc_dynpro using 'SAPMM06I' 0100 .
perform bdc_field using 'BDC_CURSOR' 'EINE-EKORG' .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_field using 'EINA-LIFNR' it_tab5-vendor .
perform bdc_field using 'EINA-MATNR' it_tab5-material .
perform bdc_field using 'EINE-EKORG' wa_tab1-pur_org .
perform bdc_field using 'RM06I-NORMB' 'X' .
perform bdc_dynpro using 'SAPMM06I' 0101 .
perform bdc_field using 'BDC_CURSOR' 'EINA-WGLIF' .
perform bdc_field using 'BDC_OKCODE' '=BU' .
perform bdc_field using 'EINA-WGLIF' it_tab2-msgv1 .
call transaction 'ME12' using it_tab3 mode 'E'.
refresh it_tab3.
refresh it_tab2.
endloop.
*& Form BDC_DYNPRO
Start new screen
-->P_FNAM text
-->P_FVAL text
form bdc_dynpro using program
dynpro.
clear it_tab3.
it_tab3-program = program.
it_tab3-dynpro = dynpro.
it_tab3-dynbegin = 'X'.
append it_tab3.
endform. " BDC_DYNPRO
*& Form BDC_FIELD
Insert field
-->P_FNAM text
-->P_FVAL text
form bdc_field using fnam
fval.
clear it_tab3.
it_tab3-fnam = fnam.
it_tab3-fval = fval.
append it_tab3.
endform. " BDC_FIELD
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 6:20 PM -
Hi All,
I have a requirement to create a bdc program for asset creation with recording. Any have this, please send the step-by-step procedure.
I am very thankful to you in advance.
Thanks,
Nagarjuna.HI Nagarjuna,
Step by Step approach to ceate simple BDC session program using reusable template.
Batch Data Communication is one of the vital data upload / transaction automation option in many SAP components . I am suggesting here a way out to simplify the programming for a BDC application . It utilizes a template program and gives steps to use it to create your own BDC program on the fly.
This step by step approach can be used to create a Simple BDC program i.e for a transaction which does not have any table control / looping at screen table. The same can also be enhanced to develop a program for transactions involving table controls .
1. Create a new program as executable program using SE38 transaction code.
2. Copy the following template code into your program .
---- Start of Template -
REPORT
NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
FIELD1(10),
FIELD2(2),
FIELD3(18),
FIELD4(35),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction record
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type 'C'.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'TCODE'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*----- insertion ends
perform bdc_transaction using 'TCODE'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -
3.Go to the transaction SHDB in another session ( you can also give TCODE - OSHDB in transaction code window and hit enter ).
4.Create you transaction recording in SHDB . Ensure your transaction recording takes care of input values to all the
fields to which you intend to pass values in the BDC.
5.Once your recording is done correctly create the program from recording in the SHDB transction . You will find the button to create program in SHDB . Choose the option of creating from file when you proceed through the subsequent steps.
6. Define data type t_upload and structure wa_upload in the template program with fields of structure 'RECORD' from the program generated using SHDB recording ( replace the field1, field2 and so on as per your requirement). For your understanding you can remove the suffixes to the
field name but keep the field size unchanged.
7.Copy the coding existing between 'do' and 'enddo' statement from the generated program . Insert the copied code between the loop and endloop code of form 'Do_transaction '. Replace fields of structure 'RECORD' with respective fields of structure wa_upload.Insert constant values wherever possible in transaction recording.You can also handle customised data conversions here.
8.Replace 'TCODE' in the template program with the transaction code you intend to process in this BDC.
9.Please carry out further syntax check and resolve the related issues.
This program will provide for input help to select upload file from local machine. The file needs to be in Tab delimited format and is assumed to have first row as column headers .
On successful creation of session you will be prompted with a Information popup giving the name of session ,and will take you to the SM35 transaction to process your session.
thanks
karthik -
Hi All,,
Please give Entire BDC code for MM01 Transaction.
i will change as per my requirement.
I think this is already done by some ABAP Consultants.
plz dont give answers like do recording for that transaction MM01. I know recording...
For time constraiint, I have to complete soon.....
Thanks in Advance
BestRegards,
AnilHi,
The below code is using the Session Method
report ZDS_BDC_MM01
no standard page heading line-size 255.
include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: XFELD
KZSEL_02_005(001),
* data element: MAKTX
MAKTX_006(040),
* data element: MEINS
MEINS_007(003),
* data element: MAKTX
MAKTX_008(040),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME ='C:\DHRUV.TXT'
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*do.
LOOP AT record.
*read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
record-KZSEL_02_005.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_006.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_007.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MAKT-MAKTX'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_008.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM01'.
*enddo.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
*Messages
* Message class: MS
*613 Please enter a session name and user name
The Below is the coding for the Call Transaction...
report ZDS_BDC_MM01_2
no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: MAKTX
MAKTX_005(040),
* data element: MEINS
MEINS_006(003),
* data element: MTPOS_MARA
MTPOS_MARA_007(004),
end of record.
DATA: FLNAME TYPE STRING.
*** End generated data section ***
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*** MESSAGE******
DATA: BEGIN OF MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: MATNR TYPE MARA-MATNR,
END OF MESSTAB.
****END OF MESSAGE****
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = FILENAME.
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
FLNAME = FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FLNAME
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = record
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT record.
DATA:
CNT TYPE I.
CNT = CNT + 1.
REFRESH BDCDATA.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MTART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA_007.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
*perform bdc_transaction using 'MM01'.
CALL TRANSACTION 'MM01' USING BDCDATA
MODE 'N'
UPDATE 'A'
MESSAGES INTO MESSTAB.
READ TABLE MESSTAB INTO MESSTAB INDEX CNT.
IF MESSTAB-MSGTYP = 'E'.
MESSTAB-MATNR = RECORD-MATNR_001.
MODIFY MESSTAB INDEX CNT FROM MESSTAB. " TRANSPORTING MATNR.
ENDIF.
ENDLOOP.
FORM OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING CLIENT = SY-MANDT
GROUP = 'MM01'
USER = SY-UNAME
KEEP = 'X'.
ENDFORM.
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'MM01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
END-OF-SELECTION.
LOOP AT MESSTAB.
IF MESSTAB-MSGTYP = 'E'.
WRITE:/ 'ERROR OCCURED ON MATNR = ',MESSTAB-MATNR , 'MESSAGE : MATNR ALREADY EXISTS IN MARA!!!'.
ENDIF.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*& Form close_group
* text
* --> p1 text
* <-- p2 text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " close_group
*& Form bdc_dynpro
* text
* -->P_0270 text
* -->P_0271 text
FORM bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " bdc_dynpro
*& Form bdc_field
* text
* -->P_0275 text
* -->P_0276 text
FORM bdc_field USING FNAM FVAL.
IF FVAL <> ' '.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. " bdc_field
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
HTH
Regards,
Dhruv Shah -
Problem in creating a BDC program for transaction cj20n(project sytem)
Hi all,
I am trying to create project,WBS element ,network and activity using a BDC program,
I am able to create to a recording for the transaction cj20n using tcode shdb but when i run the recording it doesnt run properly i am not able to create any thing.
I get error saying that a particular field doesnt exist on the screen.
Is possible to create a BDC program for transaction CJ20N ?
Also is there any other alternative apart from using a BAPI or a function module.
Thanks,
NishantHi,
Check below link for BAPIs of transaction cj20n.
[BAPI for cj20n|BAPI for CJ20N transaction]
Thanks,
Asit Purbey. -
TREX index for Records management in CRM
Hi All,
Hopefully this is the correct forum to post this question, if not please let me know the correct one.
Does anyone have any information on linking TREX to RMPS?
This is to resolve an issue where the case search on business partner first and last name fields are case sensitive in the electronic desk. In the DMWB we have ticked the Index-Relevant option but have been advised that we also need the link to TREX.
I have set up a TREX search index for the Solutions database in the past but setting this up for Records management doesn't seem to be as easy.
Many thanks in advance.
Gary HawkinsHi Vishnu,
Try this BAPI: BAPI_BUSPROCESSND_CREATEMULTI
BAPI_BUSPROCESSND_SAVE
Regards
Arun Kumar
Rewards Points if it helps. -
Restrict Select-Options for Logical Database field
The way we restrict select options for custom defined select option fields on selection screen.. can we restrict select options for standard Logical Database fields?
i.e. report uses PNPCE logical database and has field called PERNR. I want to restrict select options for this PERNR field so that it has options for 'Select single values' only.
Thanks,
Falguni
Edited by: Falguni V on Nov 13, 2010 6:42 AMYou can user AT SELECTION-SCREEN event, and check whether any record is having high value for PNPPERNR.
Maybe you are looking for
-
Attaching an external eSATA drive to my Mac Pro?
Need to attach a LaCie 1TB eSATA drive to my Mac Pro for video editing with Final Cut Pro. So can I just buy a regular PC based eSATA card to conect it to the Mac Pro. Like this one on Amazon http://www.amazon.co.uk/Sitecom-CN-042-eSATA-PCI-Card/dp/B
-
Hi I have the co-ordiantes for a 3 dimensional surface and I want to plot it using labview. Can some one help me & tell me the way how to feed in the co-ordinates in the 3d surface?
-
How do you show the file name under each thumbnail in the organizer instead of the date of the photo? I then want the file name to show up in the time line bar when creating a slide show. I organize the slides in my slide show by file name not by dat
-
Hi All Can any one explain me what is land scape of XI in real time projects? What it contains ? Any information on this is most welcome ! Adv..thanks and regards --- Rakesh
-
Delete any level xml element or attribute
Hi, In Design CS2, How can i delete or untag all the id attributes from the entire xml and any level with javascript. Is it possible ? Thanks with Regards Pramod Pant