Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

Similar Messages

T510 missing options for display resolution

I am looking to order a T510. Lenovo site does not show options for display resolutions any more. I need WUXGA, how do I verify this before placing an order?

Hi vijpersonal,
There is no T510 with WUXGA. WUXGA is 1920x1200, but the new Thinkpads got FHD which is 1920x1080. As far as i understand it's hard to get a T510 with FHD at the moment. Seems like Lenovo have some delivery problems for models with the FHD panel. If you search for FHD in this forum you can find a lot of discussions about that topic. I'm sure the FHD will be available soon, but don't know when that might happen. You can also get the W510 with the FHD panel and those should be possible to buy now.
You can find the Thinkpad Notebooks pdf using this link: http://www.lenovo.com/psref/
Then you can find detailed spec for a lot of Thinkpads. I don't think you will find any T510 with FHD at the moment though.
Also i'm not sure where you are looking since i just checked shop.lenovo.com and for each of the models the resolution are specified.
-gan

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

I'll provide some Proof
Link 1
Link 2
Link 3
you are not the only person with this problem maybe it will come back in Mountain Lion who knows.

How to enable regex validation for display name attribute?

I need to put some control around the display name attribute (for all objects in the system). However, when I go to administration => schema management => all attributes => display name, I see the regular expression text field under validation
tab is disabled for display name. How can I enable this? I see there is already an MPR called "Administration - Schema: Administrators can change selected attributes of schema related resource" which is granting admins to change the schema of
the display name attribute, but it does not seem to help for the above scenario. Can someone please help?

Hi,
This is true for all attributes, not just Display Name. As long as an attribute has a non null value, you will not be able to change the regular expression of that attribute at the schema level.
I don't know if nullifying display attribute for all user objects (assuming you are talking about binding between Display Name and a Person/User object) is an option. If so, its worth considering.
If that is not an option, then assuming your data entry is coming from the FIM Portal and not any other external system like a custom portal, then you are ONLY left with regular expression validation at the RCDC level.
Thanks,
Jameel Syed |
Identity & Security Strategist | [email protected] |
Simplified Identity and Access Management

Additional appearance option for cross-references

There should be a way to leave off the "preamble" part ("Figure", "Table", etc) of a paragraph number in a cross-reference. So instead of writing things like "As shown in Figure 5 through Figure 9...." we could write "As shown in Figures 5 through 9....." i.e. the cross refence would just be the numbers 5 and 9 without the word "Figure" that ID4 now considers to be part of the paragraph number.
A viable alternative would be to allow paragraph numbers to appear in the interior of the paragraph rather than only at the beginning. Then figure captions could be written with the word "Figure" as part of the text, followed by the purely numeric figure number, then followed by more text comprising the rest of the caption. Then a crossreference would only pick up the number without the word "Figure".

Exactly. They're deselected, thus my question. So to get back to my original post, it looks like the designers of CS4, even though they have provided 19,762 options for searching (plus those in cross-references), none of the options will allow you to start at the front of a book and find each cross-reference in turn to check that they jump to the right page.
Sometimes I think that the designers of InDesign really haven't got into the spirt of Book. They've offered it, but half-heartedly. But that will be the subject of another post.
So, I'll repeat my question: is it possible to search for cross-references?

Sleep option for display only yosemite 5K iMac

Hi
I've used a macbook in the past on snow leopard and lion and these had independent sliders for display and computer sleep. My wife bought me a 5k retina iMac at the weekend (i was shocked) and notice it only has a slider for display sleep.
Is this normal behaviour for yosemite on a new iMac? I see there is an option to prevent sleeping when the display is off, so does this mean effectively as soon as the display goes off the computer sleeps? Not good if you are using plea media library on your mac..
Thanks for any advice.

I noticed the same issue and cannot find any information as to when the iMac actually goes to sleep. It's unclear to me whether "Display off" = Sleep or not.
Meanwhile, there is a nice tool called "Caffeine" on the Mac App Store that will work well for you and your Media Server issue: https://itunes.apple.com/de/app/caffeine/id411246225?l=en&mt=12

Options for modeling massterdata attributes which can have multiple values

Hallo All BW Experts!
here is a modelling requirement which i find quite interesting and challenging.
How can we use attributes for a masterdata which can have multiplevalues. Currently these kind of attributes are stored in seperate ODS. One example for such a requirement might be the Busines Partner groupes. Each Business partner can be in more than one group.
my question is , How can we modell such kind of masterdata model which enables us to use these attributes for restrictions in reporting from various independent infoproviders. Main problem is due to the condition that the no of such groups per each user is not fixed and can be changed in runtime.
any suggession will be rewarded.
with regards
ashwin

Hi Arun!
Is there any possiblily to create such a model in BW which is flexible. One option might be to use a heirarchy. Actually the requirement looks like this. We must be able to analyse all businesspartner data and with that data we will be able to group the customers into various target groups. now we want to anyalyse the performance of such target grouops in past time.
to be simple
1) it is possible to create customer groups based on masterdata charecteristics.(there is lot of facilitiey available in BW3.5 and more in 7.0 for this) this is very dynamic
2) Now is it in anyway possible to analayse the performance of such a group. I think currently heirarchies serve such purpose but small limitation in SAP is that they must not contain more than 100000 records otherwise the performance is siverly limited.
any suggestion
with regards
ashwin

No arrange option for Displays

I am using Keynote for presentations and want the presentation option on my laptop. When I have the laptop connected to the projector and go to OS X Display Preferences there is not an option to arrange the displays.
How do I disable the mirroring function?
Dennis

Dennis,
You have to do this via system preferences. Click on the Apple in the upper left corner of your screen. Select System Preferences. Then select Displays. If you have more than one display connected, you will have the option of clicking on a Mirror checkbox. If it is checked, you'll see the same thing on both laptops. If you uncheck it, you can display your notes, current slide, upcoming slide, etc. on your laptop, and your slides on the other screen.
I hope this helps.
Mike

I have osx 10.6.8 and have lost the side scroll bars on Safari. When I go into System Preferences there is NOT an "always" option for displaying Scroll Bar. How do I get it them to display again?

When using Safari the scroll bars no longer appear on the right hand side. When I go into System Preferences the option to Always have the scroll bars displayed is NOT there. How/Where do I go to get these to show all the time?

It SHOULD be under the General tab in System Preferences:
(Note that this is a Mavericks screenshot, but it should be there in Snow Leopard, too, if indeed you're still running 10.6.8 as your profile says)
Clinton

Need more options for display

Is it possible to add more option like "default date format mask" for results that are output in the grid?
I am using this product since this AM and I already love it.
ps: Will this be the right forum to request nwe enhancements?
Raj

we have logged this as an enhancement request. This is a great place for enhancement requests; one person sugested using a single thread for enhancement requests, and created a thread called enhancement requests; but we will take good ideas any way we can.
Mike

User exit in MIRO for GRN reference

Just wanted to know is there any user exit for displaying only GR items in MIRO which are there only in GR documents. Using SAP version 4.7 , here MIRO doesn't have any option for displaying GRN documents.
regards
anu

Hi,
Try using one of the following BADI'S.
MRM_TRANSACT_DEFAULT
MRM_HEADER_DEFAULT
BADI_FDCB_SUBBAS01
BADI_FDCB_SUBBAS02
BADI_FDCB_SUBBAS03
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
FI_TRANS_DATE_DERIVE
ME_COMMITMENT_STO_CH
ME_COMMTMNT_PO_RELEV
ME_COMMTMNT_PO_REL_C
BADI_PRKNG_NO_UPDATE
MRM_PAYMENT_TERMS
MRM_WT_SPLIT_UPDATE
MRM_HEADER_CHECK
KR Jaideep,

Looking for a reference manual that actually describes in detail all attributes for a command

I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book".
Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they give the student specific settings for the Refine Edge dialog bog under the Quick Selection tool. They say, "To prepare the edge for a drop shadow, set Smooth to 24, Feather to 0.5, Contrast to 12, and Shift Edge to -21". Note: I am calling things like Smooth, Feather, Contrast, etc command attributes.
My question is not about this specific example, but all these attribute values for all the commands. For example, what does Shift Edge really do when negative or positive. My question is: does a reference, either a book, pdf, or a non-Adobe product (probably a book) exist that actually explains when each attribute actually does for every command? Basically looking for a boring detailed reference guide so when I am using a specific command, I can read about the attributes for the specific command and understand what the values really mean and not guess my trial and error.
Thanks in Advance,
LouF

Lou Fuchs wrote:
For example, I just happen to have my book open to page 113 and it is showing me (at the bottom of the page) the dialog box for Layer Style. I was hoping for a reference manual that explains every option in the that dialog box in detail and tells you what each option means and how it effects the image.
I hope this clarifies what I am looking for.
Here's a little snippet from the info about Layer Styles in the Adobe manual.
Layer style options
To the top
Altitude For the Bevel and Emboss effect, sets the height of the light source. A setting of 0 is equivalent to ground level, 90 is directly above the layer. Angle Determines the lighting angle at which the effect is applied to the layer. You can drag in the document window to adjust the angle of a Drop Shadow, Inner Shadow, or Satin effect.
Anti-alias Blends the edge pixels of a contour or gloss contour. This option is most useful on small shadows with complicated contours. Blend Mode Determines how the layer style blends with the underlying layers, which may or may not include the active layer. For example, an inner shadow blends with the active layer because the effect is drawn on top of that layer, but a drop shadow blends only with the layers beneath the active layer. In most cases, the default mode for each effect produces the best results. See Blending modes. Choke Shrinks the boundaries of the matte of an Inner Shadow or Inner Glow prior to blurring. Color Specifies the color of a shadow, glow, or highlight. You can click the color box and choose a color. Contour With solid-color glows, Contour allows you to create rings of transparency. With gradient-filled glows, Contour allows you to create variations in the repetition of the gradient color and opacity. In beveling and embossing, Contour allows you to sculpt the ridges, valleys, and bumps that are shaded in the embossing process. With shadows, Contour allows you to specify the fade. For more information, see Modify layer effects with contours. Distance Specifies the offset distance for a shadow or satin effect. You can drag in the document window to adjust the offset distance. Depth Specifies the depth of a bevel. It also specifies the depth of a pattern. Use Global Light This setting allows you to set one “master” lighting angle that is then available in all the layer effects that use shading: Drop Shadow, Inner Shadow, and Bevel and Emboss. In any of these effects, if Use Global Light is selected and you set a lighting angle, that angle becomes the global lighting angle. Any other effect that has Use Global Light selected automatically inherits the same angle setting. If Use Global Light is deselected, the lighting angle you set is “local” and applies only to that effect. You can also set the global lighting angle by choosing Layer Style > Global Light. Gloss Contour Creates a glossy, metallic appearance. Gloss Contour is applied after shading a bevel or emboss. Gradient Specifies the gradient of a layer effect. Click the gradient to display the Gradient Editor, or click the inverted arrow and choose a gradient from the pop-up panel. You can edit a gradient or create a new gradient using the Gradient Editor. You can edit the color or opacity in the Gradient Overlay panel the same way you edit them in the Gradient Editor. For some effects, you can specify additional gradient options. Reverse flips the orientation of the gradient, Align With Layer uses the bounding box of the layer to calculate the gradient fill, and Scale scales the application of the gradient. You can also move the center of the gradient by clicking and dragging in the image window. Style specifies the shape of the gradient. Highlight or Shadow Mode Specifies the blending mode of a bevel or emboss highlight or shadow. Jitter Varies the application of a gradient’s color and opacity. Layer Knocks Out Drop Shadow Controls the drop shadow’s visibility in a semitransparent layer. Noise Specifies the number of random elements in the opacity of a glow or shadow. Enter a value or drag the slider. Opacity Sets the opacity of the layer effect. Enter a value or drag the slider. Pattern Specifies the pattern of a layer effect. Click the pop-up panel and choose a pattern. Click the New Preset button to create a new preset pattern based on the current settings. Click Snap To Origin to make the origin of the pattern the same as the origin of the document (when Link With Layer is selected), or to place the origin at the upper-left corner of the layer (if Link With Layer is deselected). Select Link With Layer if you want the pattern to move along with the layer as the layer moves. Drag the Scale slider or enter a value to specify the size of the pattern. Drag a pattern to position it in the layer; reset the position by using the Snap To Origin button. The Pattern option is not available if no patterns are loaded. Position Specifies the position of a stroke effect as Outside, Inside, or Center. Range Controls which portion or range of the glow is targeted for the contour. Size Specifies the radius and size of blur or the size of the shadow. Soften Blurs the results of shading to reduce unwanted artifacts. Source Specifies the source for an inner glow. Choose Center to apply a glow that emanates from the center of the layer’s content, or Edge toapply a glow that emanates from the inside edges of the layer’s content. Spread Expands the boundaries of the matte prior to blurring.
Style Specifies the style of a bevel: Inner Bevel creates a bevel on the inside edges of the layer contents; Outer Bevel creates a bevel on the outside edges of the layer contents; Emboss simulates the effect of embossing the layer contents against the underlying layers; Pillow Emboss simulates the effect of stamping the edges of the layer contents into the underlying layers; and Stroke Emboss confines embossing to the boundaries of a stroke effect applied to the layer. (The Stroke Emboss effect is not visible if no stroke is applied to the layer.)
Technique Smooth, Chisel Hard, and Chisel Soft are available for bevel and emboss effects; Softer and Precise apply to Inner Glow and Outer Glow effects.
Smooth Blurs the edges of a matte slightly and is useful for all types of mattes, whether their edges are soft or hard. It does not preserve detailed features at larger sizes. Chisel Hard Uses a distance measurement technique and is primarily useful on hard-edged mattes from anti-aliased shapes such as type. It preserves detailed features better than the Smooth technique.
Chisel Soft Uses a modified distance measurement technique and, although not as accurate as Chisel Hard, is more useful on a larger range of mattes. It preserves features better than the Smooth technique. Softer Applies a blur and is useful on all types of mattes, whether their edges are soft or hard. At larger sizes, Softer does not preserve detailed features.
Precise Uses a distance measurement technique to create a glow and is primarily useful on hard-edged mattes from anti-aliased shapes
such as type. It preserves features better than the Softer technique. Texture Applies a texture. Use Scale to scale the size of the texture. Select Link With Layer if you want the texture to move along with the layer as the layer moves. Invert inverts the texture. Depth varies the degree and direction (up/down) to which the texturing is applied. Snap To Origin makes the origin of the pattern the same as the origin of the document (if Link With Layer is deselected) or places the origin in the upper-left corner of the layer (if Link With Layer is selected). Drag the texture to position it in the layer.

Missing "Add Records" and "Refresh Records" options for data sets post domain re-import

We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?

So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled.

Is there a recommended "order" for displaying CSS shorthand attributes?

When using shorthand (for background tags, for example) is
there a
"preferred" or "recommended" order of displaying the
attributes?
background: url(filename.jpg) no-repeat left top fixed
background: no-repeat left fixed top url(filename.jpg)
etc.

It's safer to assume that the order is important than to
assume that it's
not. Try giving the font style a random order, for example.
Or the list
style....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Jay" <[email protected]> wrote in message
news:evlt6n$mcm$[email protected]..
> "Murray *ACE*" <[email protected]>
wrote in message
> news:eviupm$t4o$[email protected]..
>> It does matter, in general. Make sure you check out
what the order
>> should be for the style you are using, in DW's
Reference panel.
>
> O'REILLY CSS Reference | Style: background
> Value: Any combination of the five background-style
attribute values, in
> any order.
> Example: body {background: url(watermark.jpg) repeat
fixed}
>
> I realize the order matters if you're specifying margins
or borders
> (left-right-top-bottom) but for the background selector
it doesn't appear
> to be a factor, according to DW's Reference panel.
>

Creating variable for display attribute

Hi
I have a requirement where i have to give selection criteria for a display attribute. But how to create a variable for display attribute. Please help.
Thanks
Imran.

If you are in BI 7.0 version. You have to put the navigational attribute in either characteristic restriction (Filter) or default values section and then you will get the restriction option. Once restricted you can put
that char in where ever you want.
Regards,
Kams

Options for Displaying Reference Attribute in AdvancedTable Record

Similar Messages

Maybe you are looking for