Recording Options for SHDB

Hey all,
Please could someone explain what all the different options for recording BDC in SHDB are. In specific I'm interested in knowing what the CATT mode (No CATT, CATT with individual screen control & CATT without individual screen control) and the Simulate Background Mode options do.
Thank you
Tim.

hi,
Check this link
http://www.sap-img.com/sap-catt.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pf
Usually from what I have seen CATT is not used for regular transactions in the productive environment. I have only seen LSMW used for the transfer of data from non-SAP systems to SAP systems. It guides you thru your data migration tasks.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e21017408e11d1896b0000e8322d00/content.htm
- SAP advise not to use CATT in productive systems.
http://www.planetsap.com/basis1.htm
- Start of CATT processes allowed: This option determines whether you want to allow the CATT (Computer Aided Test Tool) process in the client or not. Computer Aided Test Tool (CATT) is tool provided by SAP to test different functionality of the SAP system. To run the CATT tool you can execute transaction SCAT. CATT process changes the database extensively and requires lot of system resources. So we recommend not to chose this option if you are in the production environment.
There has also been some comments on LSMW on this forum:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D37272%26tstart%3D135
- The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
My 2 cent would be why not develop a solution using Batch Input, BAPI etc?
Check these links
http://help.sap.com/saphelp_nw04/helpdata/en/48/c521a8f6ec11d2bdde080009b4534c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/frameset.htm
http://www.thespot4sap.com/Articles/CATT.asp
http://www.sap-img.com/sap-catt.htm
it is one of the option for call transaction
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/e21481408e11d1896b0000e8322d00/frameset.htm
http://www.sd-solutions.com/documents/SDS_CATT.html
Please check this online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf

Similar Messages

Missing "Add Records" and "Refresh Records" options for data sets post domain re-import

We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?

So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled.

Need 'What You Hear' recording option for Notebook(Vista)-Does Xi-Fi for Notebooks provide th

Hi,
I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?Kevin

If it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.

BDC options for recording

Hi all gurus!
When we go to SHDB, we have 4 options to set - Default Window, Don't end recording after commit, simulate background mode and "No BDC mode".
I guess I am aware of the meaning of No bdc mode -> which probably means that SY-BINPT will be SPACE if I set it to X.
No end of BDC after commit is also obvious that it will not end BDC after COMMIT. But when should we set it while recording?
What is SIMULATE background mode? Does it mean SY-BATCH is set to 'X"? When we run BDC in session mode, is Sy-batch set to 'X'? Should we set this parameter or not? This is not clear.
Also, in what scenarios should we check Default window?
My understanding is that it should not matter how we set the parameters while recording. Important thing is we should code in similar manner. So whatever was set while recording, same should be set while coding in CTUPARAMS. Is it correct?
Thanks in adv !

Check the following thread
Recording Options for SHDB

Hi gurur's in BDC for recording other than SHDB any process is there

hi gurur's in BDC for recording other than SHDB any process is there

Hi,
I think as such there is no other process. You can do the recording through transaction SM35 as well, go there and click on new recording. You can do the recording this way also but this is not different from SHDB.
Reward if this clarifies your doubt.
Regards,
Lalit Kabra

Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

Just upgraded to QT Pro for Windows and cant find the "new screen recording" option

I've only ever used QT Pro for Mac. Son got a Windows laptop and would like to do screen recording so I upgraded his QT Player to Pro version.
I had a chat with Apple Store support but they didnt know. Are there differences in Mac and Windows versions? How to get a refund if so? Thanks.

Try these (free) utilities or search for paid versions:
http://www.top5freeware.com/screen-recording-software-for-windows
Peter

Recording option in Batch input session

Hi
Can some one explain me or provide documentation ([email protected]) on Recording option in Batch input session.
Points will be rewarded
Regards,
Raghu Ram.

Hi SriLaxmi,
Firstly thanks for quick reply.
I have exceuted that report with all screens ' A'.
While exceuting it that pane is not geeting reflected and evenif i reprocess the recording again created in Shdb tcode to check whether that window is reflected or not,it gives me correct expected recording.
Anything else ,useful u can suggest?
Thanks,
Amru

Restrict Select-Options for Logical Database field

The way we restrict select options for custom defined select option fields on selection screen.. can we restrict select options for standard Logical Database fields?
i.e. report uses PNPCE logical database and has field called PERNR. I want to restrict select options for this PERNR field so that it has options for 'Select single values' only.
Thanks,
Falguni
Edited by: Falguni V on Nov 13, 2010 6:42 AM

You can user AT SELECTION-SCREEN event, and check whether any record is having high value for PNPPERNR.

Initialisation option for source system in schedular tab

What initialisation option for system in schedular tab signifies? Does it acts as pointer and points to the last record loaded in cube or ods?

Hi....
Welcome to SDN..........
Initialisation option for source system in schedular tab........
shows to you all the init you made for a specific datasource/sourcesystem...if you find a row here, it means that the init channel is active and you can load delta for that specific flow.....
Initialization may with data transfer or without Data Transfer.......If you do with data transfer it will set the init flag............as well as it will fetch the data from set up table...........if you do without data transfer it will only set the init flag.....it will not fetch any records.........As soon as this init flag get set.......delta queue will get generated in the source system........after that any changes or new records will go to the delta queue.............So initialization load will be followed by delta load......
When you have to reinit, first of all you have to delete this row and then request a new initial load, otherwise the system cannot allow to perform a new init (with overlapping condition) if you don't deete the previous one....
Hope this helps
Regards,
Debjani.......

I do not have a delete option for files or folders in Adobe Creative Cloud

I do not have a delete option for files or folders in Adobe Creative Cloud
im looking and looking....
im stumped.....
4 weeks now....
kai

HOW TO DELETE FILES or FOLDERS or Assets from Adobe Creative Cloud Brouser/Web Portal By: Kai Buskirk rev:130626
Adobe now burried deleting or trashing unwanted iteams files or folders in the Archive section of your creative cloud brouser/web portal.
Note!! - No longeer is there a standard TrashCan icon or simple Delete button... its burried in the archive sector: but why i ask?
An archive is an accumulation of historical records, or the physical place they are located.[1] Archives contain primary source documents that have accumulated over the course of an individual or organization's lifetime, and are kept to show the function of that person or organization. Professional archivists and historians generally understand archives to be records that have been naturally and necessarily generated as a product of regular legal, commercial, administrative or social activities.
In general, archives consist of records that have been selected for permanent or long-term preservation on grounds of their enduring cultural, historical, or evidentiary value. Archival records are normally unpublished and almost always unique, unlike books or magazines for which many identical copies exist. This means that archives (the places) are quite distinct from libraries with regard to their functions and organization, although archival collections can often be found within library buildings
A person who works in archives is called an archivist. The study and practice of organizing, preserving, and providing access to information and materials in archives is called archival science. The physical place of storage is sometimes referred to as an archive repository.
To delete files folders or individual assests in the current incarnation of adobe creative cloud brouser/web portal rev:130626
1 - Check mark the box on left and select files or folders you would like Deleted/Trashed and move them to the ARCHIVE folder location inside your adobe creative cloud brouser/web portal....Then navigate to the ARCHIVE SECTION
2 - Once the files or folders you have check marked are moved to the ARCHIVE folder location you can select them for Permanant Deletion (Trash)
ps: you can also restore them......if you so choose....
3 - in case you missed this step after selecting/checking the files or folders in the ARCHIVE folder there is a small Triangle Selector drop down that will reviel the Permanently Delete option.... clicking that is the point of no return i think..... so do not be misled my the use of the term ARCHIVE.... DELETING PERMANANTLY IS DELETING YO!
4 - OK DONE NOW YOU GOT IT .....
Good Luck Happy House Cleaning.....
Wamest Blessings,
Kai Buskirk
Message was edited by: [email protected] rev: 130626

Template Option for Vendor and Customer

Hi All,
MDG Version EHP 7
I am working on Vendor Like UI , Is there any option where i can use a already created Vendor or Customer as a Template and create a similar record ???
Currently when i use the search UI or Create UI i do not see any options for using a Template.
Regards,
Vag Vignesh Shenoy

Dear Vignesh,
I am not sure about the template. But SAP provided the Reference option to copy the existing vendor detail to creating the new Vendor/Customer master record. With this field you can create the vendor/customer easily. No need of any template. Thanks.
Regards,
Inthiyaz
Message was edited by: Inthiyaz Ahemmed

I need options for data replication within production db and dimensional db

Hi,
I'm looking for options on how to solve this issue. We've 2 databases, one is our production, operative database, used by around 400 users at a time, and another one, which is our dimensional model of the same info, used to obtain reports. We also have a lot of ETL's (extract, transform and load) processes running every night to update the dim model.
Mi problem is that we have some online reports, and nowadays, we're getting data from the operational database, causing a performance issue in online operations. We want to migrate this reports to the dimensional model, and we're trying to find the best options for doing this.
Options that we're considering are ETL's process running continuously every XX minutes, materialized views, ETL's on demand, and others.
Our objective is to minimize performance issues on transactional database.
We're using Oracle 8i (yes, the oldie one) and Reporting Services as report engine (reports just run a pkg to get data).
Any option is welcome.
Thx in advance.
Regards,
Adrian.

The best option for you if the performance is the
most important is ORACLE STREAMS. Also is the most
complex but the final results are very goodsAgreed. As User12345 points out, though, that requires Oracle 9.2 or higher.
Another option is the materialized views with Fast
Refresh , that need the materialized view logs in
the master site.
The first load is expensive but if you refresh each
15 minutes the cost is not high.I'd be careful about making that sort of statement. The overhead of both maintaining materialized view logs (which have to be written to synchronously with the OLTP transactions and which impose an overhead roughly equivalent to a trigger on the underlying table) and doing fast refreshes every 15 minutes can be extensive depending on the source system. One of the reasons that Streams came about was to limit this overhead.
For refresh i execute a cron shell that run the
DBMS_MVIEW.REFRESH package. my experience with group
refresh not was goodWhat was your negative experience with refresh groups? I've used them regularly without serious problems. Manual refreshes of individual materialized views against an OLTP system would scare the pants off me because you'd inevitably end up with transactionally inconsistent views of the data (i.e. child records would be present with no parent record, updates that affect multiple tables would be partially replicated until the next refresh, etc). Trying to move that sort of inconsistent data into a different data model, and trying to run reports off that data, would seem highly challenging at a minimum. Throwing everything into a single refresh group so that all the materialized views are transactionally consistent, or choosing a handful of refresh groups for those tables that are related to each other, seems like a far easier way to build a system.
Justin

Adobe connect 9: make recording optional?

When meeting room owners start a meeting, it immediately starts recording. In Compliance and Control, the option for mandatory recording is on. How do we make it optional? The only other option in Compliance and Control seems to be to turn recording off. Thanks.

Hi Ron,
You should see the following in your account:
If you uncheck the check box, recordings will become optional rather than forced.
Hope this helps!
Sameer Puri

Option for error handling for DTP, ' no updata, no reporting" and "deactiva

Hello Gurus,
     option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,

On the Update tab page, specify how you want the system to respond to data records with errors:
                            a.      No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                            b.      Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                            c.      Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru

Recording Options for SHDB

Similar Messages

Maybe you are looking for