BDC - session -BDC_OPEN_GROUP
Hi all,
can anyone let me know the use of parameter 'RECORD' in FM 'BDC_OPEN_GROUP'
Thanks in advance
Hi...
This parameter is passed to Specify whether the Session is Created from Recording ('X') or Not (' ').
In Recording (Tcode SHDB) you have an Option to Generate a session based on Recording.. That will fill this parameter as 'X'.
Otherwise it is optional since default value is SPACE.
<b>Reward if Helpful</b>
Similar Messages
-
Error in my BDC SESSION METHOD
Hi,
I was trying work on BDC SESSION METHOD AND MY TCODE IS XK01.
Here is my code can some one tell me where i am doing wrong becoz its not giving the output as I expected. And I am uploading a tab delimeter file.
report ZAN_BDCVENDOR
no standard page heading line-size 255.
include bdcrecx1.
DATA: I_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF RECORD OCCURS 0,
LIFNR(016),
BURKS(004),
EKORG(004),
KTOKK(004),
AKONT(010),
FDGRV(010),
WAERS(005),
END OF RECORD.
start-of-selection.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
tables
data_tab = RECORD
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'USE_ZAV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
'8765'.
perform bdc_field using 'RF02K-BUKRS'
'1000'.
perform bdc_field using 'RF02K-EKORG'
'1000'.
perform bdc_field using 'RF02K-KTOKK'
'0001'.
perform bdc_field using 'USE_ZAV'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFB1-AKONT'
'160000'.
perform bdc_field using 'LFB1-FDGRV'
'A1'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFM1-WAERS'
'usd'.
perform bdc_transaction using 'XK01'.
ENDLOOP.
perform close_group.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SESSION1'
HOLDDATE = FILLER8
KEEP = FILLER1
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF sy-subrc <> 0.
WRITE 'ERROR IN OPEN_GROUP'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = I_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I appreciateHi,
i guess, the error is due to, u didnt pass the TCODE parameter in BDC_INSERT FM.
Try by passing it...
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE*
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = I_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
Hope it works!!
Regards,
Pavan -
Problem in bdc session method for tcode FS00
Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY = BDC.
*& DESCRIPTION = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR, " ACCOUNT NUMBER.
BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS, " COMPANY CODE.
KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS, " ACCOUNT GROUP.
XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT, " P&L STATEMEMENT.
GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP, " P&L STATEMENT TYPE.
XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK, " BALANCE SHEET STATEMENT
SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML, " SHORT TEXT.
LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML, " LONG TEXT.
WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS, " ACCOUNT CURRENCY.
XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH, " ONLY BALANCES IN LOCAL CURRENCY.
MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ, " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW, " OPEN ITEM MANAGEMENT.
XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES, " LINE ITEM DISPLAY.
ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA, " SORT KEY.
FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG, " FIELD STATUS GROUP.
XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON, " RELAVENT CASH FLOW.
END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
PERFORM BDCDATA_OPEN.
PERFORM BDC_POPULATE.
PERFORM BDC_CLOSE.
*& Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
endform. " GET_FILENAME
*& Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE
FILETYPE = 'DAT'
TABLES
data_tab = IT_UPLOAD.
endform. " UPLOAD_DATA
*& Form BDCDATA_OPEN
FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'GLMASTER'
HOLDDATE = SY-DATUM
KEEP = 'X'
USER = SY-UNAME.
endform. " BDCDATA_OPEN
*& Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR' IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS' IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS' IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP' IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK' IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FS00'
TABLES
dynprotab = IT_BDCDATA.
endloop.
endform. " BDC_POPULATE
*& Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform. " BDC_CLOSE
*& Form BDC_SUB1
FORM FOR BDCDATA.
form BDC_SUB1 USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO = C.
APPEND IT_BDCDATA.
endform. " BDC_SUB1
*& Form BDC_SUB2
text
form BDC_SUB2 USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform. " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren -
Hello All,
I have a question in BDC session method. I am using BDC insert for calling ME11, ME12 and ME15 (create, change and delete) transaction for creating purchase info records. I have a specific situation where I am looping thru an internal table and calling BDC_insert (Create, change or delete) for each record . Finally, after looping all records, submitting 'rsbdcsub' program to release the bdc sessions. Only the first record in the internal table is committed and all others are ignored. Why is this happening? Do I need to explicitly call BDC_release after every insert.
I cannot release the session until the entire records are successfully inserted. So please suggest some solution for achieving this
Thanks
RickyHi All,
Here is the code.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
DEST = FILLER8
group = l_group
HOLDDATE = FILLER8
keep = 'X'
user = sy-uname
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11
itab is an internal table which contain the input data to be processed.
wa_tab is a work area.
Loop at itab into wa_tab.
if wa_tab-flag = 'A'. "Create info record
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
PERFORM bdc_insert_field. "This is recording program to create info record
call function bdc_insert
exporting
tcode = ME11
tables
dynprotab = t_bdc_table.
elseif wa_tab-flag = 'C'. "Change info record
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
PERFORM bdc_insert_field. "This is recording program to change info record
call function bdc_insert
exporting
tcode = ME12
tables
dynprotab = t_bdc_table.
else. "Delete info record
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
PERFORM bdc_insert_field. "This is recording program to delete info record
call function bdc_insert
exporting
tcode = ME15
tables
dynprotab = t_bdc_table.
Endloop.
FORM bdc_insert_field USING f_name f_value.
IF f_value <> space.
CLEAR t_bdc_table.
t_bdc_table-fnam = f_name.
t_bdc_table-fval = f_value.
APPEND t_bdc_table.
ENDIF.
ENDFORM. "bdc_insert_field
form bdc_dynpro_start using p_g_program_1
p_g_screen.
CLEAR t_bdc_table.
t_bdc_table-program = p_g_program_1.
t_bdc_table-dynpro = p_g_screen.
t_bdc_table-dynbegin = 'X'.
APPEND t_bdc_table.
endform. " bdc_dynpro_start
Call function bdc_close_group.
SUBMIT rsbdcsub WITH mappe EQ l_group
WITH von EQ sy-datum
WITH bis EQ sy-datum
WITH fehler EQ '.'
EXPORTING LIST TO MEMORY
AND RETURN.
I want to call this submit only once in the program and if all records are successfully processed. Otherwise, I need to delete the session to give it a roll back.
Hope it is clear now. Any other approach is also welcomed. Thanks!
Thanks
Ricky -
Error in BDC session Insert.....
Hi All,
Guys iam running BDC pgm for MEK1 create condition records transaction and i get an error while executing through BDC_INSERT. Its an internal error with text "Error in BDC session Insert..".The text file iam using contains 26 line items for the first contract created earlier and 30 line items for the second record. My concern is it only happens for this text file with multiple or more line items.
While debugging i have observed that after the session has been created the first bdc insert goes well for the first header record and then it fails for the second record with an internal error "Error in BDC session Insert..".
Does anyone have enountered such issue before or is it related to limited number of line items in MEK1 transaction.
Any help would be appreciated.
Thanks,
Avinashreport ZSESSION1
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE .
TYPES: BEGIN OF TYP_STU,
Z_STUDID TYPE ZSTUD1-Z_STUDID,
Z_STUDNAME TYPE ZSTUD1-Z_STUDNAME,
Z_STUDAGE TYPE ZSTUD1-Z_STUDAGE,
END OF TYP_STU.
DATA: IT_STU TYPE STANDARD TABLE OF TYP_STU,
GW_STU TYPE TYP_STU,
V_PATH TYPE STRING.
PARAMETERS SUREN TYPE IBIPPARMS-PATH OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SUREN .
PERFORM GETFILE USING SUREN.
V_PATH = SUREN.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_PATH
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_STU
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SESSION1'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
DCPFM = '%'
DATFM = '%'
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
LOOP AT IT_STU INTO GW_STU.
REFRESH BDCDATA.
*perform open_group.
perform bdc_dynpro using 'SAPMSRD0' '0102'.
perform bdc_field using 'BDC_CURSOR'
'RSRD1-TBMA_VAL'.
perform bdc_field using 'BDC_OKCODE'
'=EDIT'.
perform bdc_field using 'RSRD1-TBMA'
'X'.
perform bdc_field using 'RSRD1-TBMA_VAL'
'ZSTUD1'.
perform bdc_dynpro using 'SAPLSD41' '2200'.
perform bdc_field using 'BDC_CURSOR'
'DD02D-DDTEXT'.
perform bdc_field using 'BDC_OKCODE'
'=TDED'.
perform bdc_field using 'DD02D-DDTEXT'
'Stud details'.
perform bdc_dynpro using '/1BCDWB/DBZSTUD1' '0101'.
perform bdc_field using 'BDC_CURSOR'
'ZSTUD1-Z_STUDAGE'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'ZSTUD1-Z_STUDID'
GW_STU-Z_STUDID .
perform bdc_field using 'ZSTUD1-Z_STUDNAME'
GW_STU-Z_STUDNAME .
perform bdc_field using 'ZSTUD1-Z_STUDAGE'
GW_STU-Z_STUDAGE .
perform bdc_dynpro using '/1BCDWB/DBZSTUD1' '0101'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'ZSTUD1-Z_STUDID'.
perform bdc_dynpro using 'SAPLSD41' '2200'.
perform bdc_field using 'BDC_CURSOR'
'DD02D-DDTEXT'.
perform bdc_field using 'BDC_OKCODE'
'=WB_BACK'.
perform bdc_field using 'DD02D-DDTEXT'
'Stud details'.
perform bdc_dynpro using 'SAPMSRD0' '0102'.
perform bdc_field using 'BDC_CURSOR'
'RSRD1-TBMA_VAL'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RSRD1-TBMA'
'X'.
perform bdc_field using 'RSRD1-TBMA_VAL'
'ZSTUD1'.
*perform bdc_transaction using 'SE11'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'SE11'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDLOOP.
*perform close_group.
*& Form bdc_dynpro
text
-->P_0207 text
-->P_0208 text
*FORM bdc_dynpro USING VALUE(P_0207)
VALUE(P_0208).
*ENDFORM. " bdc_dynpro
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
*& Form bdc_field
text
-->P_0212 text
-->P_0213 text
*FORM bdc_field USING VALUE(P_0212)
VALUE(P_0213).
*ENDFORM. " bdc_field
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM .
FORM GETFILE USING SUREN.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = SUREN.
ENDFORM. -
Process bdc session in Background
Hi all,
I have created a BDC Session, Now i want to process it in Foreground not in Background.
I know taht we use report RSBDCSUB for background processing but don't know the procedure for Forground.
Sugess.
Points will be sured for valuable answers.
Thanks
Sanket sethihi,
if you want it to be done by program then try this which is done through program
TABLES: LFA1,
RF02K.
TYPES: BEGIN OF TY_ITAB,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
END OF TY_ITAB.
DATA: T_ITAB TYPE TABLE OF TY_ITAB,
W_ITAB TYPE TY_ITAB.
DATA: I_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA TYPE BDCDATA.
DATA : ITAB1 LIKE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
DATA : JOBNAME(32) TYPE C,
JOBCOUNT(8) TYPE C.
DATA: R1 TYPE I VALUE 1,
C1 TYPE I VALUE 1,
R2 TYPE I VALUE 4,
C2 TYPE I VALUE 8,
FILEPATH LIKE RLGRAP-FILENAME.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
PARAMETERS:P_SRCFIL LIKE RLGRAP-FILENAME.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_SRCFIL.
PERFORM SELECT_FILE USING P_SRCFIL.
START-OF-SELECTION.
FILEPATH = P_SRCFIL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = FILEPATH
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 8
I_END_ROW = 4
TABLES
INTERN = ITAB1.
PERFORM ORGANIZE_UPLOADED_DATA.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'XK01'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME.
LOOP AT T_ITAB INTO W_ITAB.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
W_ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
W_ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
W_ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
W_ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
W_ITAB-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
W_ITAB-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0380'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'KNVK-NAMEV(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTR'.
CLEAR W_ITAB.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XK01'
TABLES
DYNPROTAB = I_BDCDATA.
REFRESH I_BDCDATA.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP' .
JOBNAME = 'JOB'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
DELANFREP = ' '
JOBGROUP = ' '
JOBNAME = JOBNAME
IMPORTING
JOBCOUNT = JOBCOUNT
CHANGING
RET =
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'SUCCESSFUL JOB OPENING'.
SUBMIT RSBDCSUB
WITH MAPPE = 'XK01'
WITH VON = SY-DATUM
*WITH Z_VERARB = 'X'
WITH ERR = 'X'
WITH LOGALL = 'X'
AND RETURN EXPORTING LIST TO MEMORY.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = JOBCOUNT
JOBNAME = JOBNAME
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE I000(0) WITH 'JOBCLOSE'.
ENDIF.
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT ITAB1 BY ROW COL.
LOOP AT ITAB1.
CASE ITAB1-COL.
WHEN 1.
W_ITAB-LIFNR = ITAB1-VALUE.
WHEN 2.
W_ITAB-KTOKK = ITAB1-VALUE.
WHEN 3.
W_ITAB-NAME1 = ITAB1-VALUE.
WHEN 4.
W_ITAB-SORTL = ITAB1-VALUE.
WHEN 5.
W_ITAB-LAND1 = ITAB1-VALUE.
WHEN 6.
W_ITAB-SPRAS = ITAB1-VALUE.
ENDCASE.
AT END OF ROW.
APPEND W_ITAB TO T_ITAB.
CLEAR W_ITAB.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
*& Form select_file
text
-->P_P_SRCFIL text
FORM SELECT_FILE USING P_SRCFIL.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_SRCFIL
ENDFORM. " select_file
*& Form bdc_dynpro
text
-->P_0131 text
-->P_0132 text
FORM BDC_DYNPRO USING PROGRAM LIKE BDCDATA-PROGRAM DYNPRO LIKE BDCDATA-DYNPRO.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM. " bdc_dynpro
*& Form bdc_field
text
-->P_0136 text
-->P_0137 text
FORM BDC_FIELD USING FNAM LIKE BDCDATA-FNAM FVAL TYPE ANY .
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM. " bdc_field
reward if useful,
thanks and regards -
Regarding BDC session to run immediately after creation
Hi Abapers,
Please help me out from the following situation.
I need to run the BDC session immediately after creating. I beleive using RSBDCSUB we can achieve it.
If it so please let me know how can we use this.....
Please let me know if any other solutions.
Thanx in advance.
will reward with points for the usefull answers.Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
If user want BDC in foreground use a CALL TRANSACTION and don't create a BDC butt fill a BDCDATA structure table and then
codeCALL TRANSACTION 'transaction' USING itab[/code]
You can specify the way to process in OPTIONS and MODE parameters.
Look at
Using CALL TRANSACTION USING for Data Transfer
something like
if foreground is initial.
BDC_OPEN_GROUP
endif.
fill bdcdata
if foreground is initial.
BDC_INSERT
BDC_CLOSE_GROUP
SUBMIT RSBDCSUB WITH MAPPE = group_name
else.
CALL transaction USING data MODE mode.
endif.
CODE --->
code
DATA : w_nom TYPE apq_grpn ,
w_kbetr(16) ,
w_datab(10) ,
w_datbi(10) ,
w_kpein(5) ,
w_kmein(3) .
CHECK is_data-flag EQ 'A' OR
is_data-flag EQ 'B' OR
is_data-flag EQ 'C'.
REFRESH itg_bdcdata.
Batch-input name.
CONCATENATE 'Hauss_'
sy-uzeit
is_data-knumh+4(6)
INTO w_nom.
Open Batch-input.
PERFORM p_open_bdc USING w_nom.
Choix type cond.
PERFORM p_bdc_dynpro USING 'SAPMV13A'
'0100'.
PERFORM p_bdc_field USING 'BDC_OKCODE'
'=ANTA'.
PERFORM p_bdc_field USING 'RV13A-KSCHL'
gw_kschl.
Choix de la clef.
PERFORM p_bdc_dynpro USING 'SAPLV14A'
'0100'.
PERFORM p_bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM p_bdc_field USING 'RV130-SELKZ(01)'
'X'.
Enregistre la nouvelle condition.
PERFORM p_bdc_dynpro USING 'SAPMV13A'
'1510'.
PERFORM p_bdc_field USING 'BDC_OKCODE'
'=SICH'.
PERFORM p_bdc_field USING 'KOMG-VKORG'
is_data-vkorg.
PERFORM p_bdc_field USING 'KOMG-VTWEG'
is_data-vtweg.
PERFORM p_bdc_field USING 'KOMG-KUNNR'
is_data-kunnr.
PERFORM p_bdc_field USING 'KOMG-MATNR'
is_data-matnr.
PERFORM p_bdc_field USING 'KOMG-WERKS'
is_data-werks.
PERFORM p_bdc_field USING 'KOMG-AUART_SD'
is_data-auart_sd.
PERFORM p_bdc_field USING 'KOMG-INCO1(01)'
is_data-inco1.
WRITE is_data-kbetr2 TO w_kbetr.
PERFORM p_bdc_field USING 'KONP-KBETR(01)'
w_kbetr.
WRITE is_data-kpein TO w_kpein.
PERFORM p_bdc_field USING 'KONP-KPEIN(01)'
w_kpein.
WRITE is_data-kmein TO w_kmein.
PERFORM p_bdc_field USING 'KONP-KMEIN(01)'
w_kmein.
WRITE is_data-datab TO w_datab.
PERFORM p_bdc_field USING 'RV13A-DATAB(01)'
w_datab.
WRITE is_data-datbi TO w_datbi.
PERFORM p_bdc_field USING 'RV13A-DATBI(01)'
w_datbi.
Save the transaction.
PERFORM p_insert_bdc USING 'VK11'.
Close the Batch-input..
PERFORM p_close_bdc.
COMMIT WORK AND WAIT.
SUBMIT rsbdcsub WITH mappe = w_nom
WITH von = sy-datum
WITH bis = sy-datum
EXPORTING LIST TO MEMORY
AND RETURN.[/code] -
Hi,
Eplained BDC Session Method
flat file upload into sapABAP BDC SESSION METHOD SAMPLE CODE
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform.
Regards. -
hi
in bdc session method, how can i use multiple transactions.
can anybody provide me with the code to migrate data.
thanx
rockyHi Rocky,
Check this code.
Have one BDC_OPEN_GROUP, multiple BDC_INSERT s and one BDC_CLOSE_GROUP.
You should have multiple BDC_INSERT s for multiple transactions.
call function BDC_OPENGROUP.
Build BDC data and cal lBDC_INSERT for transaction 1
Build BDC data and cal lBDC_INSERT for transaction 2
Build BDC data and cal lBDC_INSERT for transaction 3
call function BDC_CLOSE_GROUP.
Check out this sample program
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop
Hope this resolves your query.
Reward all the helpful answers.
Regards -
My requirement says that if BDC sessions are generated by the process, they are to be submitted with the prefix of HR_TSD. I am not able to understand this requirement. Anyone Pls explain.
Thanks in advance.Define a parameter on selction screen for session name and use it .
PARAMETERS:p_fname LIKE rlgrap-filename OBLIGATORY,
p_group LIKE apqi-groupid OBLIGATORY.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
* DEST = ' '
group = p_group
holddate = v_date
keep = 'X'
user = sy-uname
* RECORD = ' '
prog = sy-cprog.
* IMPORTING
* QID =
* EXCEPTIONS
* CLIENT_INVALID = 1
* DESTINATION_INVALID = 2
* GROUP_INVALID = 3
* GROUP_IS_LOCKED = 4
* HOLDDATE_INVALID = 5
* INTERNAL_ERROR = 6
* QUEUE_ERROR = 7
* RUNNING = 8
* SYSTEM_LOCK_ERROR = 9
* USER_INVALID = 10
* OTHERS = 11. -
Hello Friends,
Can you guide me how to create BDC with SESSION method.?
Please mantion examples.
Thanks in advance.
Regards,
nimesh masterSee below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Reward Points if it is useful
Thanks
Seshu -
Hi,
The standard SAP functionality (in Oil&Gas-SAPLOIAI) is creating a session with Deletion indicator.
The standard SAP functionality is not using KEEP parameter (BDC_OPEN_GROUP)
Once the session is processed, it is getting deleted.
We want to retain the session, even after processing the session.
All our bdc sessions start with NET*
Is there a program that we can run that will modify the delete indicator to 'KEEP'.
SAP an option to modify the delete indicator manually. But many sessions will be created each day and our users don't want to go with this option.
Can you please suggest if a custom program can be written to modify the delete indicator.
Thanks in Advance.
-VidyaHi Anil,
call tranction may solve your problem in genral to create our own erron log we will use call tranction. i will update you if i got more information. -
Hi,
Please any body send a sample program for bdc session method.
Thanks,
sreedhar.See the BDC Session method program :
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04 -
What is structure of BDC session?
Hi Experts,
What is structure of BDC session?
Thanks
~Sid
"Max points are assured"Hi,
If you want to write your own program, proceed as follows:
Generate the batch input session using function module BDC_OPEN_GROUP
The proceed as follows for each transaction that session contains:
In the BDCDATA structure, enter the value for all screens and fields that must be processed in the transaction.
Use BDC_INSERT to transfer the transaction and BDCDATA structure to the session.
Close the batch input session with BDC_CLOSE_GROUP
Start to process the generated session.
BDC_OPEN_GROUP
Use the BDC_OPEN_GROUP function module to create a new session. Once you have created a session, then you can insert batch input data into it with BDC_INSERT.
You cannot reopen a session that already exits and has been closed. If you call BDC_OPEN_GROUP with the name of an existing session, then an additional session with the same name is created.
A batch input program may have only one session open at a time. Before opening a session, make sure that any sessions that program closes any sessions that it previously had opened.
BDC_OPEN_GROUP takes the following EXPORTING parameters:
CLIENT
Client in which the session is to be processed. Default: If you dont provide a value for this parameter, the default is the client under which the bathc input program runs when the session is created.
GROUP
Name of the session that is to be created. May up to 12 characters long. Default: None. You must specify a session name.
HOLDDATE
Lock date. The session is locked and may not be processed until after the date that you specified. Only a system administrator with the LOCK authorization for the authorization object Batch Input Authorizations can unlock and run a session before this date.
KEEP
Retain session after successful processing. Set this option to the value X to have a session kept after it has been successfully processed. A session that is kept remains in the input/output queue until an administrator deleletes it. Sessions that contain errors in transactions are kept even if KEEP is not set. Default: If not set, then sessions that are successfully processed are deleted. Only the batch input log is kept.
USER
Authorizations user for background processing. This is the user name that is used for checking authorizations if a session is started in background processing. The user must be authorized for all of transactions and functions that are to be executed in a session. Otherwise, transactions will be terminated with no authorization errors. The user can be of type dialog or background. Dialog users are normal interactive users in the R/3 System. Background users are user master records that are specially defined for providing authorizations for background processing jobs.
BDC_INSERT
Use the BDC_INSERT function module to add a transaction to a batch input session. You specify the transaction that is to be started in the call to BDC_INSERT. You must provide a BDCDATA structure that contains all of the data required to process the transaction completely.
BDC_INSERT takes the following parameters:
TCODE
The code of the transaction that is to be run.
POST_LOCAL
Parameter to update data locally. If POST_LOCAL = X, data will be updated locally.
DYNPROTAB
The BDCDATA structure that contains the data that is to be processed by the transaction. DYNPROTAB is a table parameter in the function module.
BDC_CLOSE_GROUP
Use the BDC_CLOSE_GROUP function module to close a session after you have inserted all of your batch input data into it. Once a session is closed, it can be processed.
BDC_CLOSE_GROUP needs no parameters. It automatically closes the session that is currently open in your program. You must close a session before you can open another session from the same program.
BDCDATA Structure
IF you want to write data to a batch input session or to process the data using CALL TRANSACTION USING or CALL DIALOG, you must prepare an internal table <bdc_tab>. This internal table must be structured according to ABAP Dictionary structure BDCDATA. The internal table <bdc_tab> stores the data that is to be entered into R/3 System and the actions that are necessary to process data. You can think of the table as storing the script that the R/3 System is to follow in processing batch input data.
BDC table structure
FIELD TYPE DESCRIPTION
Program CHAR (8) Program name of transaction.
DynPro CHAR (4) Screen number of transaction.
DynBegin CHAR (1) Indicator for new screen.
Fnam CHAR (35) Name of database field from screen.
Fval CHAR (80) Value to submit to field.
Regards,
Omkar.
Message was edited by:
Omkaram Yanamala -
URGENT - HOW TO PROCESS A BDC SESSION (IN BACKGROUND) FROM INSIDE A REPORT
Hi All,
I have a requirement wherein I need to create a BDC session for mass update(from file) of one transaction and check if at all that update has taken place and proceed with the same session for another transaction.
For this I need to know how to process the session in background in a report, so that if the processing is done, the next set of data to update a different transaction can happen.
All inputs are welcome and highly valuable to me.
If someone is unable to intrepret this, I'll detail it again.
Thanks in advance,
Vaishnavi VaradarajanHi,
1.Use RSBDCDRU is an exe pg.With this u can download the logs into local file.
2.It will create the spool request .from there u can download or print.
OtherWise:
Use the code from the link below. U need to provide the session queue id as input and it will download the log to an excel file. U can change it to ur reqmt.
Re: BDC
regards
kiran
Maybe you are looking for
-
My iphone is not recognized in itunes for windows
I have followed the directions from apple support. Uninstalled & reinstalled itunes, everything the page said to do & my phone isn't recognized in iTunes and it comes up as unkown device in windows. Any suggestions?
-
BADI for post processing of IDOC BOMORD
Hi experts , I want a BADI for post processing of IDOC BOMORD. Actually after IDOC processing BOM got updated in system and i want to schedule the explosion of BOM in process order after it. Please update me with the solution. Thanks Nitin kapoor
-
CRM ICWEB "END CALL" tab getting truncated in IE8
Hi, We have CRM 6.0 (2007) running on IE6 and planning to upgrade the browser to IE8. During testing, found that "EndCall" tab on Identification screen is getting truncated after clicking on it. Upon click the tab moves up into the header area and ge
-
Function module to modify the user roles & profiles
Hi All, I am working on user maintenance and i need a function module to modify the user roles & profiles. Thanks in Advance. Phani.
-
Disk Images in Disk Utility Don't Work
I think that either I have a misunderstanding of .dmg files or Disk Utility isn't working. I see a .dmg as an exact clone of a particular file or folder that when opened mounts a volume on a user's desktop with contains the files. However, if I use D