Bdoc recovery in CRM after deletion

Dear SDN team,
By mistake we have deleted/archived some BDocs in our SAP CRM 5.2 Prod system .
We want to recover those BDocs to perform some analysis.
How can we achieve this ?? Please help urgently.
Points will be rewarded.
Regards
Ritvij

Hi Ritvij,
If a Bdoc is deleted, it will not be removed from the system immediatly. It will be "set" to delete status.
But, if you run the m/w re-organisation job (which is usually scheduled to run periodically), there is a chance that it might have picked it and removed it for ever (unless you have some archive stratergy).
So, if you have set your middleware re-org job to delete the Bdocs, then i dont think there is any way to recover it.
Regards,
Alin

Similar Messages

Disk utility recovery of files after deleting from external hard drive?

I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all, any help is appreciated.

The files are still on the drive, and will remain unless and until you overwrite them with new data. So don't write anything more to the drive in addition to the two files you added after reformatting it, and do download the free trial version(s) of one or more data recovery utilities:
Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Each is offered in a free demo version that will show you exactly what the full version could recover before you have to pay for anything. There are others on the market, but these are the ones I'm familiar with.
To recover data using any such utility, you must have another drive available on which to save the recovered files. Saving them on the same drive they're being recovered from would just overwrite other files that haven't yet been recovered.

Mass Delete of BDocs in SAP CRM system

Dear SDC team,
We like to hard delete some BDocs which are hanging in the txn SMW01 in CRM 5.2 system.
As of now we do not see a option to delete these unnecessary BDocs, as they are in Intermediate state (I04) .
Please tell us if there any standard report which can be used to do Mass Delete of BDocs in SAP CRM system.
Or Is there any Tables which need to be emptied .
Please help ..Points would be rewarded .
Regards
Ritvij

hi
Concerning the BDOCs without error, there is a job that you can schedule to run daily that cleans the BDocs processed without errors from the database.
The details of this job are:
Job name: SMO6_REORG
Job program: SMO6_REORG
Variants: SAP_MW_REORG
Trace data (days to hold): 7 (recomended by SAP)
Trace log (days to hold): 7 (recomended by SAP)
Period: daily.
Besides i should tell you I looked through Help and there are no best practices that I could find.We went through this process at one of my clients. They had 40,000 pluserror'd BDOCs and thousands of processed ones. The Middleware guycreated a program to delete the BDOCs that were over 2 months old andhad completed successfully to prevent the further build up of theseBDOCs. SAP Help says they are marked for deletion after they areprocessed, but it doesn't look like they get removed as wanted..
From SAP Help:
Deleting Processed BDoc Messages
1. Processed BDoc messages cannot be archived.
2. BDoc messages that have been processed successfully are marked fordeletion.
Procedure
To delete processed BDoc messages choose Architecture and Technology >Middleware > Message Flow > Delete Processed BDoc Messages
The messages you selected will be deleted.
and regarding deletion of non errant Bdocs
Usually there are two schools of thought on this issue:
1) Make the hard decision to go back to the beginning and startcorrectly all the things that caused these to error out (bank codes, taxcodes, config on R/3 side but not on CRM side, etc.). Then these can bereprocessed and everything will be brought up to date in the system.This takes time and may neccesistate hiring a Middleware resource for ashort term to help go through the process. The big part of this isidentifying those config items that are out of synch between R/3 andCRM.
2) The other way to handle these is to go through the errors quickly,gain an insight into the cause of the errors, and correct the bigthings. Delete all the old error'd BDOCs and then bring down all the bigitems again - BPs, Sales orders, products, and so forth. This is muchfaster process, but has it's own risks and problems vs Option 1 above.As these items come in, if you haven't fixed the config problems, theywill error out again. It's a fix and move - fix and move process. In theend you may have some missing data still, but the time commitment ismuch lower. You just need to get leadership's buy-in to this process.
Those error'd BDOCs are a problem and point out all the datainconsistencies that exist in the system. They are also a drag onperformance and need to be processed one way or another. After that,keeping them under a "1000" number is imperative. If you don't, theproblem will get away from you again.
finally Some Transaction Codes that people might find useful for working withBDOCs:
SMW01 Display BDocs
SMW02 Display BDoc Summary
SMW02A BDoc Messages: Show Top N Errors
SMW03 Show stats of unproc. BDoc messages
SMW10 Bdoc structure chekker
SMW19 Copy BDoc and process
SMW20 Process BDocs
SMW3EX1 Flow Carrier Example
SMW3FDBDOC Maintain Bdoctype dep. Flows
SMW3FDCUST Maintain Customer Flows
SMW3FDIF Maintain Bdoctype dep. Attributes
SMW3FDSTD Maintain Standard Flows
SMW3RBM Convert BDoc Messages to XML
SMW3RC BDoc Message Error Recovery
SMW3RCW BDoc Message Error Processor
SMW3STOP1 General Stop Configuration
SMW3STOP2 BDoc Type Stop Configuration
SMW3WD Watchdog for failed BDoc Messages
SMW3_00 BDoc Type Settings
SMW3_GSB Generic Bridge Activation
SMW3_GSB2 Generic Synch. Bridge Configuration
SMW3_GSB_SHOW Display Generic Synch Bridge Config
SMWMBSTATDISP BDoc statistics
hope info will help your cause,i told all this coz before deleting the Bdocs complete understanding of the errant and non errant Bdocs is necessary,
best regards
ashish

How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

[Solved] Can't boot into Arch after deleting some partitons

About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
I can chroot into Arch and did the following -
grub> find /boot/grub/stage1
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
ed
Done.
grub>
The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
title Arch uuid
#root (hd0,5)
uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
intrd /boot/kernel26.img
title Arch hd
root (hd0,5)
kernel /boot/vmlinuz26 root=/dev/sda6
intrd /boot/kernel26.img
I have a bootinfo script which gives the following (from the chroot environment) -
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
sda6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
mount: /dev/sda6 already mounted or sda6 busy
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
/dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
/dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
/dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
/dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
/dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
/dev/sda4 * 63 417,689 417,627 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
/dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
/dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
/dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
/dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
/dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
/dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
/dev/sda: PTTYPE="dos"
/dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda12 / ext3 (rw,commit=0)
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1 = swap
/dev/sda1 none swap sw 0 0
# /dev/sda3 = root
#UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
/dev/sda3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda4 = boot
# UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
/dev/sda4 /boot ext3 relatime 0 2
# /dev/sda5 = home
# UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
/dev/sda5 /home ext3 relatime 0 2
#/dev/sda6
#UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
/dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
# /dev/sda7
# UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
/dev/sda7 /var ext3 relatime 0 2
# /dev/sda8
/dev/sda8 /opt ext3 relatime 0 2
# /dev/sda10 - Arch
/dev/sda10 /mnt/arch ext3 relatime 0 2
# Not sure what this is doing here
# Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
# /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /dev/sde1
# uuid appears to be 644406B3570C1846 -> ../../sde1
#/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
#1TB-01
UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-02
UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-03
UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 750GB-02 ext3 Partition
# UUID giving problems, trying with dev
# UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
/dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
============================= sda4/grub/menu.lst: =============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-26-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-22-generic
title Ubuntu 10.04.1 LTS, memtest86+
root (hd0,3)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
============================= sda4/grub/grub.cfg: =============================
# DO NOT EDIT THIS FILE
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-26-generic ...'
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-24-generic ...'
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-23-generic ...'
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-22-generic ...'
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-22-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch Linux (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26.img
menuentry "Arch Linux Fallback (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26-fallback.img
#### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# From Arch grub menu.lst
# (0) Arch Linux
#title Arch Linux [/boot/vmlinuz26]
#root (hd0,0)
#kernel /vmlinuz26 root=/dev/sda3 ro
#initrd /kernel26.img
#Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
(hdX,Y)/grub/linux.mod).
#This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
#An example, booting Arch Linux:
#set root=(hd0,5)
#linux /boot/vmlinuz26 root=/dev/sda5
#initrd /boot/kernel26.img
#boot
###menuentry "Arch1" {
###insmod ext2
###set root='(hd0,10)'
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
ID
###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch2" {
###insmod ext2
###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch3" {
###insmod ext2
###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
### END /etc/grub.d/40_custom ###
=================== sda4: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.32-22-generic
.0GB: initrd.img-2.6.32-23-generic
.1GB: initrd.img-2.6.32-24-generic
.1GB: initrd.img-2.6.32-26-generic
.0GB: vmlinuz26
.0GB: vmlinuz-2.6.32-22-generic
.0GB: vmlinuz-2.6.32-23-generic
.1GB: vmlinuz-2.6.32-24-generic
.0GB: vmlinuz-2.6.32-26-generic
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
[/quote]
Output of fdisk -l from chroot is -
[quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000b084
Device Boot Start End Blocks Id System
/dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
/dev/sda2 25414954 1465144064 719864555+ 5 Extended
/dev/sda3 6554520 25414829 9430155 83 Linux
/dev/sda4 * 63 417689 208813+ 83 Linux
/dev/sda5 25414956 1360287809 667436427 83 Linux
/dev/sda6 1360287873 1423198349 31455238+ 83 Linux
/dev/sda7 1423198413 1465144064 20972826 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00025bd3
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953523711 976760832 83 Linux
I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
List of all partitions:
No filesystem could mount root, tried:
Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
I am really lost as to what is going on, which I'm sure is evident.
Thanks a lot
belbo
Last edited by belbo (2011-08-12 13:31:23)

Hi. Unfortunately that didn't help.
So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
[2011-08-08 23:32] ==> Image generation successful
[2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic.
Pacman.log relating to the new kernel package below -
[2011-08-09 00:22] Running 'pacman -Suy'
[2011-08-09 00:22] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:23] Running 'pacman -Suy'
[2011-08-09 00:23] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:26] removed python-mygpoclient (1.5-1)
[2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
[2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
[2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
[2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
[2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
[2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-09 00:26] ==> Building image from preset: 'default'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [autodetect]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-09 00:26] 7079 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] ==> Building image from preset: 'fallback'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-09 00:26] 23360 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] installed linux (3.0.1-1)
I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
If anybody has other ideas I'd really appreciate it.
If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
Any assistance greatly appreciated.
Thanks
belbo
Last edited by belbo (2011-08-08 23:17:49)

Sales document not able to save with rection reasons after delete the reference order

Hi Experts,
Good day!!
My user wrongly created a sales order with sales document type as ZOR instead of ZORS.
Then with reference to ZOR sales order, user created another sales order with sales document type as ZORS.
Once he created sales order(ZORS) with document type ZOR, he has deleted ZOR sales order.
But after deletion of ZOR sales order user has to make those sales order line items as reasons for rejection but system not allowed to change.
Request you to please help how to over come this issue.
Test case on above scenario:
Same above scenario am trying to do but system not allowing to delete the sales order and the information message shows as "
Item 000010 cannot be deleted (CRM does not allow deletion) Message no. V2251" Plz help this one also.
Regards,
Sree

Hi,
I've tried to simulate the scenario you were in in standard SAP system, but failed to have it reproduced, and therefore, I suppose this issue could be something relevant to the specific environment you have
my exercise:
create a sales order with type OR, and then create another one with OR with reference to the first one, and then have the first one deleted, check in document flow from the second order and make sure the first one is marked 'archived', and then set rejection code for the line item in the second order - I was able to save it => at last, I've got two orders, the first one archived, while the second one completed

After deletion of record the dialog page is coming back to source page

Dear all
Good Morning
i have creation page user will enter it will call to view mode,in that user will click on edit button again it will call to creation page with editable mode.
in that creation page editable mode user click on delete button it willl call to dialog page buttons "Yes" AND "NO"
user will click on yes the record is deleted but again after deletion of record again it is calling to creation page and creating blank record
but my requirement is after click on yes button it will delete the record and navigate to search page
how is it?
in my case again it is coming to creation page.
/*in edit page user click on delete button it will call to dialog page*/
if ("Delete".equals(pageContext.getParameter(EVENT_PARAM)))
String oid = pageContext.getParameter("oid");
OAException msg = new OAException("PO", "XX_DELETE_SUPPSITE_CONFIRM");
OADialogPage dpage =
new OADialogPage(OAException.WARNING, msg, null, "", "");
dpage.setOkButtonToPost(true);
dpage.setOkButtonLabel("Yes");
dpage.setOkButtonItemName("DeleteYes");
dpage.setPostToCallingPage(true);
dpage.setNoButtonToPost(true);
dpage.setNoButtonItemName("DeleteNo");
Hashtable ht = new Hashtable(1);
ht.put("d1", oid);
dpage.setFormParameters(ht);
pageContext.redirectToDialogPage(dpage);
/*If user click on No button it will call to editable mode*/(previuos page)
if(pageContext.getParameter("DeleteNo")!=null)
System.out.println("User will click on this button....");
String oppoid = (String)pageContext.getSessionValue("xxoppoid");
HashMap hp=new HashMap();
hp.put("Purpose","Edit");
hp.put("oppoid",oppoid);
pageContext.setForceForwardURL("OA.jsp?page=/crm/oracle/apps/xxcrm/crmmgmt/quotationmgmt/webui/xxcrmquotationcreationPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, hp, false, null,
OAWebBeanConstants.IGNORE_MESSAGES);
/*if user will click on delete yes button*/ after delete i want to call search page but it is going to search page internally it is coming to creation page and blank record is created.*/
if (pageContext.getParameter("DeleteYes") != null)
String s1 = pageContext.getParameter("d1");
am.xxDeleteQuotation(s1);
pageContext.setForceForwardURL("OA.jsp?page=/crm/oracle/apps/xxcrm/crmmgmt/quotationmgmt/webui/xxcrmquotationsearchPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true, null,
OAWebBeanConstants.IGNORE_MESSAGES);
I hope u understand my question
Regards
Sreekanth

Hi Gaurav,
Already i am using what u saying that way.
That way also,am getting the error
My Co Code is,
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
xxcrmItemMgmtAMImpl am = (xxcrmItemMgmtAMImpl)pageContext.getApplicationModule(webBean);
String valid = pageContext.getParameter("Dialog");
System.out.println("the value of valid is"+valid);
if(valid!=null)
pageContext.setForwardURL("OA.jsp?page=/crm/oracle/apps/xxcrm/crmmgmt/quotationmgmt/webui/xxcrmItemsAddPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,null,false,OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
String itemid=pageContext.getParameter("itemid");
pageContext.putSessionValue("itemid",itemid);
System.out.println("the item id in additem viewco is"+itemid);
am.xxeditAddItem(itemid);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
xxcrmItemMgmtAMImpl am = (xxcrmItemMgmtAMImpl)pageContext.getApplicationModule(webBean);
if("Delete".equals(pageContext.getParameter(EVENT_PARAM))) {
String itemid=pageContext.getSessionValue("itemid").toString();
OAException msg=new OAException("PO","XX_DELETE_SUPPSITE_CONFIRM");
OADialogPage dpage=new OADialogPage(OAException.WARNING,
msg,null,"","");
System.out.println("this is delete block1");
dpage.setOkButtonToPost(true);
dpage.setOkButtonLabel("Yes");
dpage.setOkButtonItemName("DeleteYes");
dpage.setPostToCallingPage(true);
dpage.setNoButtonToPost(true);
Hashtable ht=new Hashtable();
ht.put("d1",itemid);
dpage.setFormParameters(ht);
pageContext.redirectToDialogPage(dpage);
System.out.println("this is delete block2");
if(pageContext.getParameter("DeleteYes")!=null) {
String itemid=pageContext.getParameter("d1");
Serializable[] d1={itemid};
am.invokeMethod("xxDeleteItem",d1);
HashMap hm=new HashMap();
hm.put("Dialog","Yes");
String test=hm.get("Dialog").toString();
System.out.println("the dialog page value is"+test);
pageContext.forwardImmediatelyToCurrentPage(hm,false,null);
}

Slow reboot after deleting bootcamp partition

Hello,
I was just told by a tech store that my bootcamp partition was slowing down my computer incredibly. I no longer need this partition so I went into Disk Utility, clicked the partition, and deleted it. I also had my RAM updated from 4GB to 8GB. I have an Early 2011 Macbook Pro, operating on Yosemite.
The only question I have is, when I rebooted my computer for the first time after deleting the partition, the restarting process took much longer than normal. Without the bootcamp startup, I figured the startup time would be less, when in reality, it was longer. Is there something I missed while deleting my partition, and is there a way to fix this and speed up the reboot time? If not, will this slow reboot be a one time issue?
Any comments would be appreciated!
Thanks,
Rachel

There is a hidden Recovery HD between the OS X and the deleted BC partition, which you can verify using
sudo gpt -vv -r show /dev/disk0
in OSX Terminal.
BCA does a better job by also relocating the Recovery HD appropriately and giving you a contiguous partition.
The only other method is to subsume Recovery HD in OS X partition and then re-install OS X which will rebuild Recovery HD. This does not modify any of you files, but just the OS.
You will also need to clean the Hybrid MBR which is now dangling and inappropriate for your case.

Problem expanding my mac partition after deleting a second partition

I had created a second mac partition to test out OS X Yosemite but after deleting it, my main mac partition is missing about 36 gb of space and when I try to
resize the mac partition to fill up the grey space it won't let me. How can I fix this? Any help is appreciated

Install Mavericks, Lion/Mountain Lion From Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND- R keys until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
I've never done this myself in this way. However, in theory it should work. If it does not, then you must use a Full Internet Recovery process as follows:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Help I lost my email after deleting my mail acount

I lost my email after deleting my mail acount there was nothoing in the trash and I have important email whish were in the reception folder. What can I do ? Thanks

It all depends on the type of account and how it was configured. For IMAP-type accounts, mail is stored on the server, and setting up the account again is all that's needed to regain access to your mail.
If you deleted a POP account, however, then all your mail stored locally in that account's mailboxes has certainly been wiped out, not just moved somewhere, and you were warned that this would happen by the following alert:
Remove Account
Are you sure you want to remove the <AccountType> account "<AccountName>"?
This will permanently delete the account setup information, mailboxes, and messages from your computer. Messages stored on the mail server will not be affected.
For each mail account, Mail creates a folder within ~/Library/Mail/ whose name starts with the account type (POP, IMAP, .Mac), followed by the account username and the incoming mail server. Deleting the account causes this folder and everything within it to be deleted as well.
If the POP account was configured to leave mail on the server for some time instead of removing it right away, incoming mail that's still on the server can be downloaded by setting up the account again, just like for IMAP accounts, but keep in mind that this would only work for received (i.e. not sent) mail that has not yet been removed from the server.
If the messages are not on the server, and you don't have a backup, your only option is to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage. Of these, the only one I know for sure that can recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

After Delete in Linked list...unable to display the linked list

Hi...i know that there is an implementation of the class Linked Link but i am required to show how the linked list works in this case for my project...please help...
Yes..I tried to delete some objects in a linked list but after that i am not able to display the objects that were already in the linked list properly and instead it throws an NullPointerException.
Below shows the relevant coding for deleting and listing the linked list...
public Node remove(Comparator comparer) throws Exception {
     boolean found = false;
     Node prevnode = head;          //the node before the nextnode
     Node deletedNode = null;     //node deleted...
     //get next node and apply removal criteria
     for(Node nextnode = head.getNextNode(); nextnode != null; nextnode = nextnode.getNextNode()) {
          if(comparer.equals(nextnode)) {
               found = true;
               //remove the next node from the list and return it
               prevnode.setNextNode(nextnode.getNextNode());
               nextnode.setNextNode(null);
               deletedNode = nextnode;
               count = count - 1;
               break;
     if (found) return deletedNode;
     else throw new Exception ("Not found !!!");
public Object[] list() {
     //code to gather information into object array
     Node node;
     Object[] nodes = new Object[count];
     node = head.getNextNode();
     for (int i=0; i<count; i++) {
          nodes[i] = node.getInformation(); // this is the line that cause runtime error after deleting...but before deleting, it works without problem.
          node = node.getNextNode();
     return nodes;
}Please help me in figuring out what went wrong with that line...so far i really can't see any problem with it but it still throws a NullPointerException
Thanks

OK -- I've had a cup and my systems are coming back on line...
The problem looks to be the way that you are handling the pointer to the previous node in your deletion code. Essentially, that is not getting incremented along with the nextNode -- it is always pointing to head. So when you find the node to delete then the line
   prevnode.setNextNode(nextnode.getNextNode());will set the nextNode for head to be null in certain situations (like if you are removing the tail, for instance).
Then when you try to print out the list, the first call you make is
node = head.getNextNode();Which has been set to null, so you get an NPE when you try to access the information.
Nothing like my favorite alkaloid to help things along on a Monday morning...
- N

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

Jar file is not working after deleting all packages from the same directory

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

Is there a setting to return to the inbox after deleting/filing an open email?

Hi all,
I'm running iPhone 4s. Is there a setting to have the mail client return to the inbox after deleting/filing an open email? It currently just opens the next email.
Any help is greatly appreciated.
Thanks.

Hi,
You could try is to '''Disable''' the Foxit, Adobe and Office '''Plugins''' in '''Tools '''('''Alt '''+ '''T''') > '''Add-ons''' and use the normal Firefox Open with (when you click on a link) to browse/open it in the required application.
[https://support.mozilla.org/en-US/kb/Using%20plugins%20with%20Firefox Using plugins]

Bdoc recovery in CRM after deletion

Similar Messages

Maybe you are looking for