Sales document not able to save with rection reasons after delete the reference order

Hi Experts,
Good day!!
My user wrongly created a sales order with sales document type as ZOR instead of ZORS.
Then with reference to ZOR sales order, user created another sales order with sales document type as ZORS.
Once he created sales order(ZORS)  with document type ZOR, he has deleted ZOR sales order.
But after deletion of ZOR sales order user has to make those sales order line items as reasons for rejection but system not allowed to change.
                      Request you to please help how to over come this issue.
Test case on above scenario:
Same above scenario am trying to do but system not allowing to delete the sales order and the information message shows as "
Item 000010 cannot be deleted (CRM does not allow deletion) Message no. V2251" Plz help this one also.
Regards,
Sree

Hi,
I've tried to simulate the scenario you were in in standard SAP system, but failed to have it reproduced, and therefore, I suppose this issue could be something relevant to the specific environment you have
my exercise:
create a sales order with type OR, and then create another one with OR with reference to the first one, and then have the first one deleted, check in document flow from the second order and make sure the first one is marked 'archived', and then set rejection code for the line item in the second order - I was able to save it => at last, I've got two orders, the first one archived, while the second one completed

Similar Messages

  • HT4623 i could not able to activate with any sim after updating the software version 5.1 in 3gs, what should i do....

    could any one please tell me the solution..
    even i did not understand, why Apple Support remain silent...

    hi your phone is not factory unlocked , you should have think about before updating ... may be you didnt know about the situation , any way you can make it ..you have to take to local place where iphone unlocking ...that suggestion only i can do ...

  • Office documents not allowed to save back to SharePoint when using the "Save As.." Sharepoint hangs trying to contact the site.

    I have a user who is a Sharepoint site owner (of the site in question) who just received a new machine, but every time she opens a document from our SharePoint site and then tries the "Save As.." option it hangs trying to contact the sharepoint
    site.  The specific message is "Contacting: (insert sharepoint site). Press ESC to cancel." 
    Sometimes when you choose ESC it allows you to save do what Save As should have done, but other times it will hang at Not Responding and freeze the application.  I have tried repairing Office reloading IE and even gave the user a new profile, but nothing
    has fixed it.
    She can do this without any issue on other machines and I have found that even when I log on with my administrative privelidges I have the same issue.  I have one co-worker who was able to get things to function normally however which makes this even
    more frustrating.
    Any suggestions would be welcome.

    Hi,
    Please take a look at this thread, and see if the steps in it also work for you:
    http://answers.microsoft.com/en-us/office/forum/office_2010-word/contacting-server-press-esc-to-cancel/8384c481-bc9f-44b9-bd38-9dd1c7cb9876
    In the Templates and Add-Ins dialog box, see which template is attached to the affected document(s)
    Disable the component of Microsoft Sharepoint Foundation Support via Add/Remove features in Control Panel.
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Not able to connect with remote speakers after successfully set up

    I just finished setting up successfully (joining existing wireless network) but when I go to Itunes and select my remote speakers it just goes connecting to airport and then stops. Any ideas why?

    You might want to try upgrading to the latest version of JavaMail (1.4.3), which makes use
    of SSL somewhat simpler. Also, the file SSLNOTES.txt included with JavaMail has some
    tips for debugging problems such as this, as does the JavaMail FAQ.
    Most often this error is caused by not having the appropriate certificates in your local trust
    store. The JDK normally comes with the required root certificates, but if you're running in
    an application server environment you might be using a different trust store.

  • I am not able to save the pdf with filled data or related to reader extension

    Hi,
    I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
    or whenever i save data it says that the pdf will be saved blank.
    I know that this is the reader extension issue. How to i add this reader extension feature into it.
    I know that reader extension can be
    1. cached
    2. A document can be made reader extended using adobe live cycle process.
    3. also it can be embedded while designing the pdf.
    Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
    I know we have taken reader extension license but dont know how to use this reader extension feature.
    Regards
    Sunil

    Hi Sunil,
    You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
    You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
    I have a summary here:
    http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
    Also have a look at the Adobe page:
    http://www.adobe.com/products/livecycle/readerextensions/
    Maybe talk to the Adobe sales in your region.
    Good luck,
    Niall

  • End users are not able to save interactive pdf form created with designer

    I am new to using LiveCycle Designer and have created a pdf form but my end users are not able to save edited form. Does this have something to do with whether the form is static or dynamic. If so, I am not exactly sure how to use the restorestate option to convert it back to static. I also tried to enable the "user rights access in adobe reader" under the advance menu and had no luck.
    My end users have acrobat reader 9 - do I need them to download anything else, maybe professional.

    Thanks Paul for your reponse
    In my Adobe Pro I don't see the option Reader Extend rather I enabled "Enabled Usage Rights in Adobe Reader" amd I figured this was somewhat the same. So if I enabled this option in Adobe Pro already and they are still not able to edit the fillable text slots or save it what other option do I have in figuring this out.

  • With my new PC Windows 8 I am not able to save my photos on my I-pod touch (latest IOS 4.2.1) Help

    With my new PC Windows 8 I am not able to save my photos on my I-pod touch (latest IOS 4.2.1) Help

    RESOLVED Thanks !

  • Have a trial version, am not able to save a document after I've made changes.  Why is that?

    Have a trial version, am not able to save a document after I've made changes.  Why is that?

    Hi,
    if you use Adobe Reader to view your PDFs you cannot save any changes by default.
    To do this you need at least Adobe Acrobat to add additional Rights (aka Usage Rights aka Reader Extensions) to your PDF.

  • Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    I have an IMAC 10.6.8
    Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    If you have iWeb V 3 you need to go to the Site Publishing Settings page...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane.  If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

    Users are not able to save pdfs after editing.  Product is Adobe XI, OS is Win7 64-bit.  When saving, an error pops up that the file cannot be saved, it is in use.  If they save as a different name, it works.  Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane.  They don't use the preview pane.  I figured out that if they completely close the explorer window, they can save.  But this means they have to open and close explorer for each file.

    Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
    Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
    I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
    I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
    use it without problems.
    Submitting an official complaint whenever the phone reps start up again in the morning.

  • Not able to save bindings when calling bindings.getOperationBinding("update") in customized method.

    Hi All,
    I'm new to ADF and trying to learn it.
    I'm using JDev version 11.1.1.6.0.
    My use case is mention below :
    1. I've created 2 Bounded task flows and calling one task flow from another task flow using task flow call activity.
    2. In child task flow, i've created view activities with Train component. View activities have text fields, radios buttons, tables etc which can be filled by user.
    3. I want to save the page data to payload if I move to next view activity using Next button or by train bar.
    To accomplish this scenario, I'm calling a customized actionListener on click of Next button/Train Stop Bar in which I'm using below mention code :
    BindingContext bindingContext = BindingContext.getCurrent();
    BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
    OperationBinding obj = bindings.getOperationBinding("update");
    if(obj != null){
         obj.execute();
         if(!obj.getErrors().isEmpty()){
              System.out.println("Not able to save data......");
         else{
              System.out.println("able to save data......");
    But I'm not able to save page data to payload/bindings. If i close the window using browser close button and move back to previous train stop in which i've filled the data, the data get lost and all the text fields/Radio button become empty.
    If I use Save button provided by Oracle BPM, then I'm able to save it. and data reflected even after if i close the window using browser close button.
    So I also try to use the below acode but did not get any success :
    FacesContext fctx = FacesContext.getCurrentInstance();
    Application app = fctx.getApplication();
    ELContext elContext = FacesContext.getCurrentInstance().getELContext();
    InvokeActionBean invokeActionBean = (InvokeActionBean)app.getELResolver().getValue(elContext, null,  "invokeActionBean");
    invokeActionBean.setAction(actionEvent);
    invokeActionBean.action();
    Can somebody please let me know, what am I doing wrong here or if I'm missing anything.
    Any pointers/suggestions for its resolution are welcome.
    Thanks in advance.

    Hi Timo,
    Yes, it is the same binding which is called from BPM Save button.
    I did not use the debugger but i tried to print the OperationBinding object which was showing me proper binding for update.
    Even when i tried to print the return value of invokeActionBean.action(); method, it print the proper string "closeTaskFlow".
    So if I see it logically, then I'm just trying to call the methods of InvokeActionBean from my customized method.
    If methods of InvokeActionBean not being accessed, or if it was not getting called, then it should not print the "closeTaskFlow" as return value.
    I only want to save page data into bindings once I'll move away from page precisely on moving next.
    If there is any other work around for this issue, please let me know.
    I've also tried to use Explicit/Implicit save points provided by ADF but that did not work too.

  • Not able to save a newly created Data Model in BI Publisher.

    Hello everyone,
    I was trying to create a new Report (my very first report) in BI Publisher. I created a new Data Model and a Data Set. But I am not able to save the Data Model and thus not able to proceed to the report. There's no error shown. Same happens with reports too.
    Kindly provide me with a solution.
    Regards
    Ash
    Edited by: 902739 on 28-Dec-2011 01:02

    You should have a group called 'XMLP_ADMIN' in your repository and administrator or the user you are using should be part of that group. Look into paint.rpd for all these.

  • Not able to save report output in a text file and RTF file

    I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product.
    1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and application get closed.
    2. In RTF format , it execute the query which i have given at the design time while creating a report . But while running i am passing query either through lexical parameter or passing value of where criteria user parameters. It display the output for the specified value. But when i save this report output in rtf file . It execute design time query and save that in a rtf file.
    If any body is having any idea about it . Please let me ASAP . It is very urgent for me.
    Thanks in advance

    Try the following:
    Do not generate the report to .rep file, but rename/copy the .rdf file to .rep file and execute it.

  • Datareader is not able to connect with database-Urgent

    Hi All,
    All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
    [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
    Module finished after a runtime of 00:00:00.2031339 with exit code -2
    Module failed due to negative exit code of -2
    It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
    It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
    Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
    Subscription:Enterprise,
    LOCATION: East Asia
    Regards,
    Biswajit

    Hi,
    Please check this url:
    https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
    which is an experiment which I created doing save as of the experiment in which the data reader works.
    I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
    Now,the data reader works fine..but the Writer fails:
    Error 0071: Incorrect username "acnadmin" or password is passed
    Strangely,its the same credentials set in the DataReader.
    Looks like all the DataInput/Output components created recently only have the problem.
    Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

  • Not able to save as PDF

    I am not able to save formscentral as PDF, and i dont have trail version. It shows me it beeing prepared but than nothing happens. thanks for help

    Can you share the form with me ([email protected]) as a co-author?
    Instruction on how to share can be found here: http://forums.adobe.com/docs/DOC-2462
    Are you on a mac or windows machine? What browser are you using?
    Gen

Maybe you are looking for