BEA-473225: Aggregator rejected statistics reported by server...

I am getting occasional errors and warnings associated with the WLI-Monitoring Runtime subsystem in my WebLogic logs supporting my ALSB installation. Errors and warnings include:
BEA-473224 Aggregator did not receive statistics from...
BEA-473225 Aggregator rejected statistics reported by...
BEA-473233 Timer (checkpoint) has been triggered...
I could not find reference to these errors in any message manual. Can anyone provide additional insigt into what these messages indicate?

I am using ALSB version 2.6. Of the three errors (warnings) mentioned in my original post, the one occurring most often is BEA-473233. I see this warning just about every two hours. About once or twice a day it does seem to work and no warning message is generated. The other two messages (BEA-473224 and BEA-473225) have shown up about 12 times each in the last 2 weeks.
I did find reference to these messages in the ALSB documentation, but their description is a bit thin. The messages appear to indicate some sort of communcation issue between the managed servers, but I cannot detect any adverse impact from these messages. There is no other indication of communication issues between the managed servers in the cluster that I can see.

Similar Messages

  • Warning ALSB Statistics Manager BEA-473007 Aggregator did not receive statistics from ...

    Hi,
    I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
    Warning on managed server1(osb_server1)
    <Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
    Error on managed server2(osb_server2)
    <Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
    java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
    at weblogic.protocol.URLManager.findURL(URLManager.java:145)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
    Truncated. see log file for complete stacktrace
    Please provide your solutions here.
    Thanks

    Hi,
    I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
    Warning on managed server1(osb_server1)
    <Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
    Error on managed server2(osb_server2)
    <Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
    java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
    at weblogic.protocol.URLManager.findURL(URLManager.java:145)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
    Truncated. see log file for complete stacktrace
    Please provide your solutions here.
    Thanks

  • BEA-473013: Aggregation Server Not Available

    Can anyone tell the reason for these messages that I observe (every 60 seconds) in the stdout logs?
    <Dec 29, 2010 9:08:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
    <Dec 29, 2010 9:09:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
    The server is part a Weblogic 10.3.x cluster. Unfortunately, the documentation online does not provide a cause for this BEA error code - http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e14397/Statistics.html

    May be this can help you
    http://prabodh-mitra.blogspot.com/2011/02/aggregation-server-not-available.html

  • What is "Default" in Usage Statistics report detail?

    I am running RoboHelp Server 8 and am outputing the "Usage Statistics" report which has an option to report on Browsers and Operating Systems. In the results for both is a category called "Default" (see images below). Does anyone know what this means? If you can answer that, maybe you can also tell me what the "Unknown" operating system is? I suspect this maybe an Apple Mac user as I know one of our users has tried accessing the help through the application installed on a Mac.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

    Further to my previous post, I can confirm that the "Unknown" operating system is definitely NOT an Apple Macintosh user. Having run the report on another area, a seperate "Macintosh" category is displayed thus leaving me in the dark again. If anyone can shed some light on this and the "Default" category I'd be very grateful.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • Agent statistics and SQL server agent

    We have CUCCX 5.02 and CUCM 6.1
    When agents try to look their "Agent statistics report" in CAD there is no data. And status of this report is "Inactive". All other reports are active.
    In CCX "control center" I see that "CRS SQL server Agent - this service is invalid" and "Cisco Desktop LDAP Monitor Service - this service is invalid".
    We have problem only with Agent statistics report. Historical reporting - work fine.
    What could be the reason?

    Hi
    Please see this tech note in order to restore the services that have failed:
    http://www.ciscosystems.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00808278d8.shtml
    Regards
    Aaron
    Please rate helpful posts...

  • Getting error "Cannot initialize Report Engine server. (RWI 00226)"

    Hello All,
    We have BO XI 3.1 running on AiX 5.3 and db2 9.5 with fixpack 6.
    I am getting error "Cannot initialize Report Engine server. (RWI 00226)" Whenever i am trying to create a document or report.
    We were not getting this error earlier. getting it since few days.
    currently our web intelligence processing server is not running and showing the status as "initializing and disabled".
    every time when i tried to restart web intelligence processing server,it is going to initializing status only.
    I tried to enable the trace for this server but it is not allowing me to do and throughing the error " Configuration, auditing or enable/disable state change rejected; server SIA.WebIntelligenceProcessingServer is currently being initialized."
    I also tried creating a new instance of web intelligence processing server, even it has also gone to "initializing" status all the time.
    Environment Information:
    BOXI 3.1 SP2
    OS: AIX 5.3
    DB: DB2 9.5 Fix pack 6
    Plese help in resolving this issue.
    Thanks & Best Wishes,
    Sachin.

    Hi,
    Thanks for your prompt response.
    I already tried the solution provided by you. I stopped BO server completely and restarted it again but it does not worked for me.
    I have stopped the old Web intelligence processing server and created a new instance and started, but the new one has not started but going to initializing status.
    It even not allowing me to delete the newly created instance, saying that it is still in initializing status.
    Please suggest me if anything else i need to check.
    Thanks in advance.
    Best Regards,
    Sachin

  • Rejection greeting returned by server.

    hi there
    keep getting mails bounced with following message
    can somebody help me out on this one?
    Reason: Rejection greeting returned by server.
    Diagnostic code: smtp;554 SPMT0003.ING.BE
    Remote system: dns;SPMT0003.ing.be (TCP|17.172.81.2|39818|193.178.209.50|25) (SPMT0003.ING.BE)
    Original-envelope-id: [email protected]
    Reporting-MTA: dns;st11p00mm-asmtp003.mac.com (tcp-daemon)
    Arrival-date: Mon, 29 Apr 2013 12:30:51 +0000 (GMT)

    MariamS wrote:
    Would anyone please give me an interpretation for the below errors?The email server 128.107.234.205 and 212.77.217.217 rejected connections from the system 86.36.68.21.
    You need to contact the administrator of these systems to determine why the connection was rejected.
    Regards,
    Shane.

  • IR: aggregation result in report footer

    Hello!
    This quote from "Beginning Oracle Application Express 4.2" at page 174 (about aggregation in IR):
    "The results are displayed at the end of the report."
    There is a simple method to print the results of aggregation to the report footer on each page?

    I asked - and I answered
    For making this I create on-Demand process for calculation results of aggregation (using APEX_IR_PKG) and make ajax request to him in "After Refresh" event of IR.
    There is the detailed manual with sample http://devsonia.ru/2013/11/14/oracle-apex-aggregation-in-interactive-report-on-each-page-en/.

  • Crystal Reports "Report Application Server"

    Does anyone have any experience with Crystal Reports' Report Application Server (RAS)?
    The provided documentation is very thin and support are taking an age to respond.
    I want to use a Bean as a data source for a report. The blurb says you can do this, but the only documented way I can find is for the bean to return a ResultSet, completely missing the point of using a bean or EJB in the first place.
    Now, Seagate's sales blurb states that Beans and EJBs can be used as data sources, but if the only way to do this is to return a common or garden ResultSet, what's the point of the bean???
    So, has anyone sucessfully used a bean or EJB as a data source for report generation under RAS, or merely CR in general, without resorting to a ResultSet??

    Crystal Reports YUK!! especially in Java Forum!Tell me about it!!
    But, like many developers, I don't get a choice. I have to use CR, and I have to integrate it into a Tomcat (4.1.24) based app. There is a Java API for RAS, but it is a pile of dung. Can you imagine publishing an API with public methods with 'do not use, for internal use only' plastered all over them!!!
    But still, back to the original question, I have to find a way of doing this, but Seagate's javadocs are a mess, as are the howto docs. All of the examples, as you might expect, are childishly simple and don't give any insight into the large and hideous API :(
    Here is an example of a CR howto.....
    There appear to be two ways of creating a data source that isn't an existing report or a database query. This
    Runtime data sources
    One of the strengths of RAS over the Crystal Reports application, is that the RAS
    can use data generated programatically at runtime. With a runtime data source,
    you can take data from any source�such as a database, a data stream, or a flat
    file�manipulate it with the programming language of your choice, and display it
    with RAS.
    To use a runtime data source
    1 Put your manipulated data in a rowset form that can be processed by the RAS.
    Consult the Rowset object and interface in the SDK JavaDocs, for details on
    creating rowsets.
    2 Create and fill the Dataset object with the rowset data.
    3 Create a RowsetController object.
    4 Add or set the data source using the RowsetController�s AddDataSource or
    SetDataSource methods respectively.
    The runtime data source is now available for use.
    Note: If you create a report based on a data set, the data that is used is not saved
    with the report. To populate the report with data the next time you open it, you
    must either re-apply the data source to see current data, or access a saved version
    of the data source for preview.
    All well and good, but RowsetController doesn't have an AddDataSource or SetDataSource method!!!!
    and this......
    JavaBean custom data sources
    You can use a JavaBean (or a Java class that does not extend the bean type) in order
    to specify a custom data source. In order to do this, you will need to:
    � Creating a Java class that specifies a custom data source
    � Referencing a java class to provide data for a report
    Creating a Java class that specifies a custom data source
    To use a JavaBean (or a Java class that does not extend the bean type) in order to
    specify a custom data source, you will need to create a class that serves as a Java
    Beans Connectivity data source for creating Crystal Reports.
    This class will need to conforms to the JavaBean standard by defining private
    properties that are accessible only through get and set methods. In this way the
    Crystal Reports designer can introspect the class as a Bean. The JavaBean
    connectivity classes require the following.
    � The constructor must have zero parameters.
    � Methods that are used as "tables" must have a return type of ResultSet.
    � Statement objects must be created using the
    ResultSet.TYPE_SCROLL_SENSITIVE and ResultSet.CONCUR_READ_ONLY
    arguments.
    Note: Methods returning ResultSet can take arguments, these are treated as
    Stored Procedure parameters by Crystal Reports.
    Now, what the hell is the point of going to the trouble of abstracting your business data into a bean or EJB, if that bean has to return a ResultSet for Crystal Reports to use??!!

  • Problem with Crystal Report Job Server Destinations

    I am using Crystal Reports XI Server and I am having problems with scheduling.  I believe that the problem is that I have not enabled any destinations under the Crystal Reports Job Server.  The following is an observation list:
    -Enabled and set up all destinations for other servers, such as the Destination Server.
    -Have been able to use Infoview to directly email, inbox, and file save reports in different formats (I believe the Destination Server controls this, right?)
    -All servers are enabled in the Central Configuration Manager
    -Have been able to go into the Crystal Reports Job Server within the CMC, but I DO NOT FIND ANY destinations to enable (why is this?)
    -Have not been able to schedule an instance of any report (neither email, nor inbox, nor file, ...nothing)
    Could somebody please help me with this?  Is this a limitation to the Crystal Reports XI Server vs the Enterprise edition?  Is there something else I am missing?  I have never been able to successfully schedule a report.

    Thank you for the input, but I have not yet solved my problem.  Please allow me to provide some additional information which may give more hints:
    I have Crystal Reports XI Server R2 installed as 5 named user license (version that comes with developer)
    The following servers are enabled in CMC (which is all of them)
    -Input.DomainNameSQL
    -DomainNameSQL.cacheserver
    -DomainNameSQL.cms
    -DomainNameSQL.destinationjobserver (has all destinations enabled)
    -DomainNameSQL.eventserver
    -DomainNameSQL.ListofValuesJobServer (no destination tab)
    -DomainNameSQL.pageserver
    -DomainNameSQL.programjobserver (has all destinations enabled)
    -DomainNameSQL.RAS
    -DomainNameSQL.reportjobserver (has destinations tab, but there are no destination entries to enable! Object type is: CrystalEnterprise.Report and detail: IDL:omg.org/CORBA/UserException:1.0
    . Details: %2.'
    These are the ONLY two event IDs that appear after I schedule the report instance.  No other events occur.
    Are there any other logs that I can check?  How do I look up what event ID 45387 and 45385 are?
    Thanks!

  • Error when calling a report from Server?

    We have a .NET application on the server and we want to call a crystal report (.rpt) from one of the forms (.NET aspx page).  We are getting below error.  The report works fine on the desktop where it is developed.  Please let us know if there is any specific process to move the reports to server.  Any help is appreciated.
    The report is developed in Crystal Reports 2008 and we are using Visual Studio 2005.  We are using Crystal Report Viewer control to call / associate the report developed.
    Error message,
    An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    Thanks
    Sridhar
    Edited by: Sridhar Thodupunoori on Dec 4, 2008 4:13 PM

    Hi,
    It seems that you are having issue with Crystal reports .Net SDK's.
    Post your question in Crystal Reports .NET SDK forum.
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Amit

  • Error when calling the report on server?

    We have a .NET application on the server and we want to call a crystal report (.rpt) from one of the forms (.NET aspx page). We are getting below error. The report works fine on the desktop where it is developed. Please let us know if there is any specific process to move the reports to server. Any help is appreciated.
    The report is developed in Crystal Reports 2008 and we are using Visual Studio 2005. We are using Crystal Report Viewer control to call / associate the report developed.
    Error message,
    An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
    Thanks
    Sridhar

    Hi,
    Have you install the runtime files of CR 2008 on server, if not then install it from [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#08].
    Download according to the service pack applied on CR 2008.
    Also ensure that you are at service pack 1 level of CR 2008 as its a latest service pack available for CR 2008.
    Hope this will help!!
    Regards,
    Amit

  • Load Report Failed - Report Application Server Failed error at runtime

    Hello, I'm pretty new to Crystal Reports so please bear with me.
    I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0.  I changed over all of my assembly references in my web.config to the new version:
    <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
    PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    Also the webpage that is displaying the ReportViewer object has this reference as well:
    <%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
        Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
    When I try and do this in our already built website I get an error:
    "Load report failed"
    With the inner exception saying:
    "The Report Application Server failed"
    This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above.  Also the samples I've used all use .NET 3.5 and the website is in 2.0.  I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
    Any help on this matter would be greatly appreciated.  Thank you for you're time.
    Chris McMahan
    Edited by: Arithal on Aug 4, 2009 8:36 PM

    And finally the stack trace.  Sorry for the length of these posts.
    [COMException (0x800001f5): The Report Application Server failed]
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
    [CrystalReportsException: Load report failed.]
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
       Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
       Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
       System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
       System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
       System.Web.UI.Control.OnInit(EventArgs e) +99
       System.Web.UI.Page.OnInit(EventArgs e) +9
       System.Web.UI.Control.InitRecursive(Control namingContainer) +321
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834

  • Creation of Report Job Server

    I've just installed a new copy of XI R2 running parallel with Crystal Enterprise 10.  My Enterprise 10 has 4 report job servers and I need to have XI R2 configured with 4 too before I start migrating the reports from CE10 to XI - How is this accomplished?

    On the server, launch the CCM (central configuration manager) from the program files\business objects.
    one of the icons looks to be a plus sign, holding the mouse over it would indicate "add server" Do this to add additional job servers. Since there are multiple jop servers insure that you select the crystal reports job server.
    Regards,
    Tim
    Edited by: Tim Ziemba on Jul 15, 2008 10:56 AM

  • Service Manager data warehouse SQL Reporting Services server is currently unavailable

    I keep getting this error when I launch my SCSM Console. Take a look at the event log > operation manager and saw this error message below. 
    Tried to google around but unable to find any solution to it. Anybody can enlighten me on this issue that I am encountering? Thanks
    Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 404: Not Found.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
    at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
    at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
    at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
    Jeron

    Hi,
    This may occur when there is a mismatch between the Report Server URL entered on the SSRS Server Location window for the Report Deployment Wizard and the SSRS Web Service Virtual Directory for the Reporting
    Services Configuration Manager.
    Use the following steps to resolve the issue:
    Launch the Reporting Services Configuration Manager on the server hosting SSRS
    Select Web Service URL
    Copy the value entered in the Virtual Directory textbox
    Paste it after the last forward slash in the Report Server URL textbox in the Report Deployment Wizard
    Continue on with the deployment
    In addition, we may need to check you default web server IP is 'all unassigned', and ping the machine and see what default ip it has assigned.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Maybe you are looking for