Before/After Histogram

In another thread (can't exactly recall which one) someone stated that the histogram could be checked while comparing the Before/After view.
However, when I hit the "\" key it doesn't change. Only the (double) RGB numbers reflect the adjustments. Is there a setting somewhere that I missed?
LR 3.2 on Win XP

One way in which it sort of works: choose one of the Before/After views so you see both the before and after photo, and then swap them back and forth.

Similar Messages

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

Question about the Before/After/Test metadata tags

i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
thus far, i have not done any unit tests that require a component to be added to the display list. i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
[Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
what do those do and when/why do i need to use them?
thanks
additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
package HM.FO.User {
import mx.controls.Button;
import mx.events.FlexEvent;
import org.flexunit.Assert;
import org.flexunit.async.Async;
import org.fluint.uiImpersonation.UIImpersonator;
public class UserWindowPresenterTest {
//protected var window:UserWindow;
protected var button:Button;
[Before( async, ui )] public function setUp():void {
//this.window = new UserWindow();
this.button = new Button();
//Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
//UIImpersonator.addChild( this.window );
UIImpersonator.addChild( this.button );
[Before( async, ui )] public function tearDown():void {
//UIImpersonator.removeChild( this.window );
//this.window = null;
UIImpersonator.removeChild( this.button );
this.button = null;
[Test( async, ui )] public function on_user_saved_clears_password_fields():void {
// this.window.pass_txt.text = "foo";
// this.window.pass_confirm_text.text = "bar";
// var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
// presenter.on_user_saved( null );
// Assert.assertNull( this.window.pass_txt.text );
// Assert.assertNull( this.window.pass_confirm_text.text );
Assert.assertTrue( true );

Okay, so the async modified is used to indicate that the asynchronous statement will be used.
There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
If I copy your code directly from below and paste it in my environment it passes.
Mike

Mailbox database size before & after backup

Hi there
i recently made a similar thread and someone told me that i should do it here so here is my issue :
i've been assigned to do a specific report related to exchange and its backup
so what we want is a report that would give us the global size of all our mailbox databases before and after the backup ( even the size of the logs before and after)
(example : we have a mailbox database X: , we need to go inside the data folder, and retrieve the size of the .edb
then do the same thing with the logs, go inside the logs folder, and retrieve the logs size )
i was wondering if anyone ever managed to pull a script that does similar things, given the fact that i ve never worked with powershell and my knowledge is kinda limited in that area
Thanks

Hi Amassuo,
for finished scripts that do things, check out the
gallery. If you want to learn powershell (I might be biased, but I highly recommend it), check out the
learning center.
Regarding your specific issue, you can check the free space on a specific disk by running this powershell command:
Get-WmiObject win32_logicaldisk -Filter "DeviceID = 'C:'" | Select -ExpandProperty FreeSpace
Comparing before/after will get you the space differential (adapt drive letter in filter as needed).
Cheers and good luck with your script,
Fred
There's no place like 127.0.0.1

BUG Before/After Function stopped working after Convert Photo to DNG

Hi,
I just converted all my photos to DNG using Lightroom's Convert Photo to DNG function and the Before/After " \ " function (in Develop module) is not working anymore... same problem in Lightroom 3.0
regards,
Danny

I processed a Nikon .nef raw file in Lightroom
. Then I went to the Library Module under
Library and chose Convert to DNG. After the conversion
the complete history was still available. However, the Before/After function using \ or Before/After Views did not work. It was necessary to click on the History State to compare views. Using the Before/After Views, the original could be compared to the processed view by clicking on the Import state.
This will not be a problem if the files are converted to DNG during initial import.
I also recommend backing up originals and all processed files along with the Lightroom database on a least two drives on location and another off-site.

Oracle 12c migration (performance before/after checks) - suggestion needed

Hello Experts;
We are going to upgrade our database to 12c from 10.2.0.4 via manual migration (direct migration is from 10.2.0..5) as per documentation:
http://www.oracle.com/technetwork/database/upgrade/upgrading-oracle-database-wp-12c-1896123.pdf
I cannot find any guidance or tutorial for testing - how we should check our processes (performance, resource usage) before and after.
Could you please suggest a way for testing before/after for our production processes?
Thanks in advanace for your reply.
Regards,
Bolo

What to test from performance perspective is very generic thing and answer lies in what is important in your application and what are the performance expectations around those important functionality.
Since applications could be of different nature like- OLTP, DSS. Your requirement could also differ accordingly. In short business must be looking at no impact situation from this upgrade. There are many ways it can be ensured. More accurate way means more money and effort. e.g. You can use Real application testing option to test the production like workload in 12c and see the impact. This requires effort around setting up and using this option and license fee. You can use other available tools like load runner etc.
In other option, you can do performance baseline on existing 10204 database and then compare it with performance baseline in 12c database. Directly doing it in prod will make most sense since then you are actually doing it real data volume and workload but it is most risky in the situations where performance degrades for something very important.
Henceforth it is recommended to run the performance baselining on non-production environment which is production like. By production like, I meant having same data as production (to get this, database refresh is very much recommended), similar workload as production (this criteria becomes more important in OLTP systems) and similar H/W, OS and Database configuration as Production. If you can't do so then your approach is not risk free.
In any case, you will have option of quick database tuning using ADDM, SQL tuning advisor and AWR etc.
Hope it helps.
Thanks,
Abhi

Page Break Before / After

Hello All,
In MS Office word, Insert > break made to page break.
In the Report, I have challenges in the Page Break Before / After.
If any one help me out, it will be great.
Thanks in advance,
REF:
Tool
Property Inspector
Object Navigator
Report Editor
Template Editor
General layout
Page Break Before
Page Break After
Page Protect
Advance Layout
Print Obeject On

the picture worth a thousand wordsDon't you think it would be better to tell us what your problem is? So you changed the property to 1. And now? Does it work? Does it not?

Before After comparison in PSE 2.0 in standard edit mode

Just a simple question : How do I get to a before after comparison on-screen, at the same time, for editing ?. Quick Fix automatically provides this, but what about when you are not in Quick fix, but rather in standard edit (I think that's what it's called) mode ?. Thanks for your help.

John,
In PSE2 you can do Image>Duplicate Image, which will create a new file with "copy" appended to the name. Then position the 2 images side-by-side, activate the original and make your changes and you have the original (the copy) to compare against. When you are finished you probably just want to close the copy version without saving.

How to remove line space before/after paragraph in Photoshop Elements?

I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return. Is there some way to adjust the extra spacing before/after a paragraph in Elements?

Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Brush no longer active between before/after toggle - bug

1. Start a brush adjustment
2. Toggle before/after (using the / key) in the view that does NOT show the split screen
3. When you return to the 'after' view (before => after) the current brush mask will be disabled. By disabled I mean that the little bullet that shows the brush mask is in the unselected state. I have to click the brush bullet to reactivate the brush mask and continue my masking.

When you use a plug-in or an external editor, you break the lossless workflow. Aperture will create a new original file(a psd or tiff file) from the version you are editing. And this new original will be sent to the plug-in, and this original will be the one you are seeing when you toggle with "M". So after a roud-trip to the external editor, you can anly toggle back to the new quasimaster(original) with "M", not all the way back to the imported original.
You cannat avoid this, only by doing all edits with Aperture provided adjustment tools and avoiding external edits.
Regards
Léonie

Merge to HDR Pro - before/after view

In the Merge to HDR Pro dialog, after making adjustments with the settings, is there a quick way to toggle and see the image before adjustments and after adjustments, before closing the dialog?

Zeno,
Thanks. I tried converting to 32bit/channel while in the Merge to HDR dialog, then opened the image in Photoshop, but still don't see how to get a before/after preview. How does this work exactly?

Space before/after tables

Is there any way to eliminate the space before/after consecutive tables? I don't want to combine the tables, but would like them to appear as if my multiple tables are one. The problem now is that when you place two tables next to each other (inline) there is a 1/8" gap between the tables.
I have tried adjusting font preferences, but the only thing that changes is the text inside the table.

I'm afraid you have only the two choices. I imagine the reason for the spacing is to preserve the separateness of multiple tables and prevent accidental "collisions" and overlapping. You can always ungroup, rearrange, and regroup. When we want to do unusual things it's often with the penalty of extra work.
Walt

Allow movement of split location in before/after comparison

It would save me a lot of time if the before/after split location was movable. If I'm developing a portrait of two people, the split usually goes right between the two people, so I can't get a good feel for how the after affect "the other" person. Also, for off-center shots, the split does no good at all to help adjust the subject.

Hi,
Refer report MB51
here in selection screen enter mvmt types 313 and 315 and execute
Here add following fields in layout;
Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

Backslash shortcut for before/after

As a European keyboard does not contain a backslash key, I am curious as to wether there is a key that will allow me to cycle between before and after views in Develop mode (as explained in LR3 manual, page 10, 4. Reduce noise and apply sharpening.)

Try opening the Develop>Before/After sub menu

Before/After Histogram

Similar Messages

Maybe you are looking for