BeJeweled and White Screen of Death

Does anyone know if the game Bejeweled creates a software conflict with OS 5. The wife gets a white screen of death after 5 or 10 minutes playing and I have to hook it up to the desltop software to get rid of it as removing the battery doesnt resolve it. All that does is start a reboot and then right back to a WSOD. The phone is a Curve 8520.

Got my own answer. I had downloaded and installed the one from Rogers so I deleted that and got the one off app world and it's working fine.

Similar Messages

  • White screen of death from game.  And a new game not working at all

    My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
    And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

    I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

    Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

  • Since updating the software on my iPhone 3gs it has developed the so called "white screen of death". The phone has not been dropped or damaged in anyway, the problem only developed after software upgrade. Rung apple and they were less than helpful

    since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?

    Basics from the manual are restart, reset, restore.
    Try all of these.
    If these fail, then:
    iOS: Unable to update or restore

  • White screen of death and reboot loop help!!!

    I have a problem with my curve, I have a white screen of death. This happens whenever I turn on my blackberry. Also my phone is stuck in a continuous loop of it rebooting, loading up showing the home screen and then rebooting again. What do I do? i have tried battrey pulls and pressing on the corners of the screen

    Deal with the rebooting first.  If you have a media card installed, remove it and test.   If it isn't the media card that is the problem, see if you can reboot in safe mode, then do a a full backup.   While in safe mode, after the backup, you can try removing any apps or themes you added and then test.  Ultimately you will probably end up reinstalling the OS.
    Once you have the device booting up and staying on, hopefully, see what you see.  If the screen is all white with no text or icon, you have a hardware problem with a connection to the display.   
    Caveat: If have gotten the device wet or dropped it, all bets are off.
    - Ira

  • My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    If you have not done a factory reset on the device, I recommend doing a complete  factory reset.  
    Factory Reset  - Warning this will reset device back to original factory settings.
    This method will not erase any MDN/MIN information
    Turn off the phone 
    Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen 
    Display will show: 
    Reboot system Now 
    Apply sdcard:update.zip 
    Wipe Data/Factory Reset 
    Wipe Cache Partition
    Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device. 
    Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit. 
    Press Volume Up 
    Press Home to select "Reset System Now" - device will reboot
    If the problem persist I recommend having a store technician take a look at the device.
    Copy and paste the link below into your browser's address bar for the store locator.  
    http://www.verizonwireless.com/b2c/storelocator/index.jsp

  • White Screen of Death and Wipe Did Not Work

    Hello - 
    I purchased my Blackberry 8900 a year ago and TMobile is my carrier.  
    I experienced a white screen of death on my Blackberry 8900 last nite while talking on it. It just dropped the call and the screen went white.  I shut it off then back on, white screen appeared after reboot.  I pulled the battery and left it out for 15 min, inserted it again and rebooted - still white. 
    I searched online and found a lot of info. My phone is recognized by the Desktop Manager software.  I was able to back up all of my data and applications.  I deleted all of the data on my phone through the DM as well (or thought I did - I can't tell if it worked or not).  I downloaded the current version of the OS from TMobile for reinstallation.  
    I downloaded JL Cmder to fully wipe the phone.  JL Cmder did not work on my home machine (Win 7) but I finally got it to work on my work machine (Vista) today.  
    I selected the wipe option (4) and JL Cmder successfully connected with the phone.  The phone rebooted and I got happy, but on phone reboot I did NOT get the "507" error all of the how-to sites say I'm supposed to get.  The phone rebooted with the same white screen and no error message.   I've run the wipe command from JL Cmder a few times on the phone and it connects, reboots but I still get the white screen with no error message.  
    Is there anything else I need to do to get this 507 error?  Or is my phone really dead?   
    I want to do what I can before I shell out more $$ for another phone.  
    Thanks in advance. 

    Thank you for your replies...
    jmrmb80 - Yes the device is still recognized by the Desktop Manager.  I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it. 
    billrobinson - I haven't dropped the phone since I bought it.  I wish I had b/c then I could blame it on something.  My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up  

  • Having an intermittent issue where my iMac blanks out on me. On restarting I get bands running down the screen with pixels jumping around, then the white screen of death and nothing... Wouldn't restart all weekend, now fine..? any ideas whats wrong?

    Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
    Genius Bar Reservation US
    Authorized Service Provider

  • I have the so called white screen of death. I am able to get into OS X Utility. I have verified disk and disk is ok. I am trying to reinstall Maverick, but i don't have enough space. Dilemma is i cannot get onto my computer to delete data for more space.

    I have the white screen of death, but am able to get into OS X utilitites. I have verifed disk and it's ok. I am trying to reinstall mavericks, but i don't have enough disk space. Dilemma is i can't get onto computer to delete files to create space.
    Any suggestions?

    Upgrade iPhoto:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • MBP 2011---White Screen of Death AND MORE!

    Hello,
    So I've got the white screen of death on my later 2011 MBP. I've been reading all the other forums and the other discussions for the last 3 weeks and I know what I have to do to get it to at least boot up, but it will not work. I tried all the reset ram options, I tried booting my computer in recovery mode but it wont go in any modes. I connected it to another MBP in target mode and repaired the disk after the verification failed and it still didnt boot up or let me go into any recovery modes. I did the target mode again and ran the repair and verify another two times. I then erased everything on my hard drive while in target mode using the disk utility erase function and now this is where I am...stuck! I don't know if that was the right thing to do it was probably in haste but I am stuck and need some help. Pleaseeeeee!

    Thank you for your replies...
    jmrmb80 - Yes the device is still recognized by the Desktop Manager.  I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it. 
    billrobinson - I haven't dropped the phone since I bought it.  I wish I had b/c then I could blame it on something.  My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up  

  • White Screen of Death Questions [PLEASE HELP!]

    If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
    Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
    I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
    Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
    NOTE: My iPod is still under warranty.
    Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
    I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
    I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
    Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
    This may be important:
    The iPod charges fine.
    The iPod can be used with my computer and iTunes fine.
    To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
    Here are some questions I have for you guys:
    Will Apple cover this in my warranty?
    If they won't, what should I do?
    How much would a replacement screen cost?
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    What could be the cause and why?
    How can I retrieve that important information? (Contacts & To Do List)
    Have you got any suggestions/tips for me?
    I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
    Daniel

    Will Apple cover this in my warranty?
    As stated above it is not covered by the warranty as it will be deemed accidental damage.  You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost.  They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
    If they won't, what should I do?
    Again, bring it into them anyways and explain what happened.  You have nothing to lose either way.  Otherwise, you really only have 2 other options.  Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look.  There are some excellent step-by-step repair guides at http://www.ifixit.com/.
    How much would a replacement screen cost?
    This depends on where or how you have it repaired.  Here is Apple's repair pricing guide.
    http://www.apple.com/support/ipod/service/prices/
    Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    If you have a warranty on it still, I wouldn't quite yet.  Take it to your local Apple store as explained above.  Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them. 
    What could be the cause and why?
    As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged.  As to what exact component, there is no way to tell.
    How can I retrieve that important information? (Contacts & To Do List)
    Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route).  See here what is included in the backup of the device.
    iTunes: About iOS backups
    If you get a new or replacement device you can restore it from that backup.
    Have you got any suggestions/tips for me?
    As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out.  Remember that they are not obligated to do so since the damage is technically accidental.  Be kind and polite when explaning what happened. You never know what could happen!
    B-rock

  • My ipod touch 4th gen. is stuck on white screen of death.

    I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it?  HELLLPPP MEEEE!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod Nano white screen of death - RESURRECTED! :D

    Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
    It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
    Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
    I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
    Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
    I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
    NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
    The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
    I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
    I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
    Please, is there any hope at all in this iPod?  At all?
    AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
    It has hope, in a way!
    Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
    Cool stuff, I swear on that! My favorite song was on here too!
    How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
    The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
    This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
    I love you Apple.

    Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
    If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
    i

  • How to deal with the "white screen of death"?

    My 1 hour old iMac (27 inch i5) just died. I had used it for less than 30 mins when it downloaded an OS update and rebooted. Then it refuses to boot, stuck in a white screen.
    After that I slid in the recover disk and used the disk utility to restore the HDD as in the recover manual. It then spent 30 mins recovering,. However, on re-start it is still stuck in the white screen of death.
    What do i do now?

    Hi anerjee;
    With a brand new Mac, personally I would not mess with it. I would take it back to Apple and ask them to fix it.
    Allan

Maybe you are looking for

  • GOS - Saving in the filesystem

    Hello, I would like to know if it's possible to save the file send thrue the GOS into the SAP filesystem ?? I have played with OAC0 / OAC1 / OAC3 / SWO1 ... and finaly with SKPR08, but I can't find a way to simply saved the document into a file in th

  • Start up problems after MBP fall

    My MacBook Pro (MacBook Pro 15.3" 2.8 GHz Intel Core 2 Duo, Mid 2009) had a small corner dent after I fell and my padded bag swang and hit the ground. As soon as I got to my office the Mac started fine and worked for a whole day without problems. The

  • Hr_general.decode_lookup

    Hi Could someone please expalin me the use of hr_general.decode_lookup in Pl/SQL ex. hr_general.decode_lookup('MAR_STATUS', per.marital_status) marital_status Thanks in advance Regards anna

  • GL Interface

    Hi All, I have successfully imported records in GL tables from legacy system thru GL INTERFACE. Now, If i want first DEBIT entry records and then CREDIT entry records then what I have to do in GL INTRFACE IMPORT program Thanks in advance regards Sanj

  • Assets needs to be deleted

    hello There are some asset procured by raising the purchase order and now payment has been done to vendors. And depriciation is also posted for these asset. But now I want to reverse the depriciation and then delete the asset. Please let me know how