Beneficiary Details coming as null in SOA Custom Composite--Create User
I have created a soa composite which works on create user workflow. This has one level of approval workflow and once the approval is done i'm sending mail to beneficiary user with the benefeciary firstname,lastname etc which i seleted from the payload... What i observered is that these values are coming as blank in the email.
I had added the wait event before this mail and sending the mail after 5 mins . In this case also the values are coming as blank.
One alternative which i found is that to create custom notification template and send mail to end user with the required details. Is there any alternative for populating the beneficiary details in the soa composite while creating user.
You can check the payload in EM by logging in into EM and then clicking on the soa-infra on the left tree and then clicking on the running instance on the right pane. On opening up the running instance of the process, you should get a popup and in those you will have the various stages the process is in. Click through each stage to check the payload xml and you can verify there. Check the BPEL doc and the steps screenshots should be somewhere, can't recall now where I read it from but had been using it for sometime myself.
-Bikash
Similar Messages
-
OIM 11gR2 - custom attribute with illegal binding on Create User form in published sandbox
Hi,
I think I have managed to paint myself into a corner!
In OIM 11gR2 I have added a number of custom attributes to the "User Form" - some Text-, some Lookup-type attributes.
While customizing the "Create User" page within a sandbox and adding a SelectOneChoice item and fiddling around with its binding, I was distracted by a phone call and the browser timed out.
The binding property on the new item is now not correct and the sandbox has unfortunately been published, and I am now unable to enter the "Create User" page - when I try, I get the following:
<Sep 23, 2013 2:39:11 PM CEST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /user/createView URI: /oracle/iam/ui/runtime/form/view/pages/userCreateForm.jsff actual-URI: /oracle/iam/ui/runtime/form/view/pages/userCreateForm.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
at com.sun.el.parser.AstValue.getTarget(AstValue.java:108)
at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:149)
at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:248)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:128)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:340)
<Sep 23, 2013 2:39:11 PM CEST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /catalog-tf/cart-details URI: /oracle/iam/ui/catalog/pages/cart-details.jsff actual-URI: /oracle/iam/ui/catalog/pages/cart-details.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
at com.sun.el.parser.AstValue.getTarget(AstValue.java:108)
at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:149)
at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:248)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:128)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:340)
Caused By: java.io.IOException: javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
at oracle.adfinternal.view.page.editor.renderkit.PageCustomizableRenderer.encodeAll(PageCustomizableRenderer.java:764)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
etc.
Of course the sandbox should not have been published - but it is - and I am stuck trying to figure out how to somehow undo this mess.
Is it possible to clean up this mess by diving to the database and removing some rows from the right tables - or perform some other operations undo my mistake?
Thanks in advance,
- Tomoim version is oim 11gR2 with BP4
-
Getting request.getAttribute is coming as null
I am trying to dynamically display a value in a pop up window (servicePop.jsp) that is called from another jsf page(Interface.jsp). But its value is coming as null.
Plz find the essential code(not entire code) I have pasted below..
--Interface.jsp*
<h:panelGroup>
<h:outputText value="Service Type"/>
<h:selectOneMenu id="lstService" value="#{UserBean.serviceType}">
<f:selectItems value="#{UserBean.serviceItems}"/>
</h:selectOneMenu>
</h:panelGroup>
<h:panelGroup>
<h:commandButton action="#{UserBean.submit}" id="submitButton" value="Generate"/>
<c:choose>
<c:when test="${UserBean.responsexml == null}">
<script type="text/javascript">
window.open('servicePop.jsp','AdviserSearchResults','width=400,height=450,left=20,top=20,menubar=no,location=no,resizable=yes,scrollbars=yes,status=yes');
</script>
</c:when>
</c:choose>
</h:panelGroup>--UserBean.java*
public void setServiceType(String serviceType) {
this.serviceType = serviceType;
super.getRequest().setAttribute("hdService", serviceType);
}--servicePop.jsp*
<tr>
<td valign="top" colspan="3"><div style="padding-bottom:10px;"><strong>Webservice error</strong></div>
<br>
Order does not exist for <%=request.getAttribute("hdService") %>. Please choose proper service type<br>
<br>
</td>
</tr>So the text is coming as "Order does not exist for null."
May I know why hsService is coming as null ?I am trying to call js code for window pop up of another jsp page.
But the value of service seems coming as null. Once I click the submit button, I hope hdid hidden field gets the value from #{UserBean.serviceType}
But I found its coming as blank, since I am getting blank Javascript Alert window.
Please find the code below below,
--Interface.jsp*
<f:view>
<h:form name="wnLoginForm">
<h:panelGroup>
<h:outputText value="Service Type"/>
<h:selectOneMenu id="lstService" value="#{UserBean.serviceType}">
<f:selectItems value="#{UserBean.serviceItems}"/>
</h:selectOneMenu>
</h:panelGroup>
<h:panelGroup>
<h:commandButton action="#{UserBean.submit}" id="submitButton" value="Generate"/>
<c:choose>
<c:when test="${UserBean.responsexml == null}">
<h:inputHidden id="hdid" value="#{UserBean.serviceType}"/>
<script type="text/javascript">
var myform = document.getElementById('wnxInterface_4:wnLoginForm1');
var service = document.getElementById(myform.name+":hdid").value;
alert(service);
window.open("servicePop.jsp?value="+serviceid,'AdviserSearchResults',"width=400,height=450,left=20,top=20,menubar=no,location=no,resizable=yes,status=yes");
</script>
</c:when>
</c:choose>
</h:panelGroup>
</h:form>
</f:view>--UserBean.java*
public void setServiceType(String serviceType) {
this.serviceType = serviceType;
}So I need hdid hidden field to gets its value once user clicks the submit button, so that I can pass it as a parameter to another jsp page through JS. -
Odd behavior when using custom Composite/CompositeContext and antialiasing
Hi,
I created a custom Composite/CompositeContext class and when I use it with antialiasing it causes a black bar to appear. I seems it has nothing to do with the compose() code but just that fact that I set my own Composite object. The submitted code will show you what I mean. There are 3 check boxes 1) allows to use the custom Composite object, 2) allows to ignore the compose() code in the CompositeContext and 3) toggles the antialiasing flag in the rendering hints. When the antialiasing flag is set and the Composite object is used the bar appears regardless of if the compose() method is executed or not. If the Composite object is not used the bar goes away.
The Composite/CompositeContext class performs clipping and gradient paint using a Ellipse2D.Float instance.
a) When the Composite is not used the code does a rectangular fill.
b) When the Composite is used it should clip the rectangular fill to only the inside of a circle and do a gradient merge of background color and current color.
c) If the compose() method is ignored then only the background is painted.
d) When antialiasing is turned on the black bar appears, i) if you ignore the compose() method it remains, ii) if you do not use the Composite object the bar disappears (???)
NOTE: the compose method's code is only for illustration purposes, I know that AlphaComposite, clipping and/or Gradient paint can be used to do what the example does. What I am trying to find out is why the fact of simply using my Composite object with antialiasing will cause the odd behavior. Been trying to figure it out but haven't, any help is appreciated.
Thx.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.image.*;
import javax.swing.*;
public class TestCustomComposite2
extends JFrame
implements ActionListener {
private JCheckBox useCompositeChk, useAntialiasingChk, useCompositeContextChk;
private Shape clippingShape = new Ellipse2D.Float(100, 100, 100, 100);
private MergeComposite composite = new MergeComposite();
public TestCustomComposite2() {
super("Test Custom Composite");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel cp = (JPanel) getContentPane();
cp.setLayout(new BorderLayout());
cp.add(new TestCanvas(), BorderLayout.CENTER);
JPanel panel = new JPanel(new FlowLayout(FlowLayout.LEFT, 0, 0));
panel.add(useCompositeChk = new JCheckBox("Use Composite", true));
useCompositeChk.addActionListener(this);
panel.add(useCompositeContextChk = new JCheckBox("Use Composite Context", true));
useCompositeContextChk.addActionListener(this);
panel.add(useAntialiasingChk = new JCheckBox("Use Antialiasing"));
useAntialiasingChk.addActionListener(this);
cp.add(panel, BorderLayout.SOUTH);
pack();
setVisible(true);
public void actionPerformed(ActionEvent evt) {
useCompositeContextChk.setEnabled(useCompositeChk.isSelected());
invalidate();
repaint();
private class TestCanvas
extends JComponent {
public TestCanvas() {
setSize(300, 300);
setPreferredSize(getSize());
public void paint(Graphics gfx) {
Dimension size = getSize();
Graphics2D gfx2D = (Graphics2D) gfx;
gfx2D.setColor(Color.GRAY);
gfx2D.fillRect(0, 0, size.width, size.height);
RenderingHints rh = null;
if(useAntialiasingChk.isSelected()) {
rh = gfx2D.getRenderingHints();
gfx2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Rectangle r = clippingShape.getBounds();
//gfx2D.setColor(Color.GREEN);
//gfx2D.drawRect(r.x, r.y, r.width, r.height);
gfx2D.setColor(Color.YELLOW);
gfx2D.fill(clippingShape);
Composite oldComposite = null;
if(useCompositeChk.isSelected()) {
oldComposite = gfx2D.getComposite();
gfx2D.setComposite(composite);
gfx2D.setColor(Color.ORANGE);
gfx2D.fillRect(r.x, r.y, r.width + 1, r.height + 1);
if(oldComposite != null)
gfx2D.setComposite(oldComposite);
if(rh != null)
gfx2D.setRenderingHints(rh);
public class MergeComposite
implements Composite, CompositeContext {
public CompositeContext createContext(ColorModel srcColorModel,
ColorModel dstColorModel,
RenderingHints hints) {
return this;
public void compose(Raster src,
Raster dstIn,
WritableRaster dstOut) {
if(!useCompositeContextChk.isSelected())
return;
int[] srcPixel = null;
int[] dstPixel = null;
for(int sy = src.getMinY(); sy < src.getMinY() + src.getHeight(); sy++) {
for(int sx = src.getMinX(); sx < src.getMinX() + src.getWidth(); sx++) {
int cx = sx - dstOut.getSampleModelTranslateX();
int cy = sy - dstOut.getSampleModelTranslateY();
if(!clippingShape.contains(cx, cy)) continue;
srcPixel = src.getPixel(sx, sy, srcPixel);
int ox = dstOut.getMinX() + sx - src.getMinX();
int oy = dstOut.getMinY() + sy - src.getMinY();
if(ox < dstOut.getMinX() || ox >= dstOut.getMinX() + dstOut.getWidth()) continue;
if(oy < dstOut.getMinY() || oy >= dstOut.getMinY() + dstOut.getHeight()) continue;
dstPixel = dstIn.getPixel(ox, oy, dstPixel);
float mergeFactor = 1.0f * (cy - 100) / 100;
dstPixel[0] = merge(mergeFactor, srcPixel[0], dstPixel[0]);
dstPixel[1] = merge(mergeFactor, srcPixel[1], dstPixel[1]);
dstPixel[2] = merge(mergeFactor, srcPixel[2], dstPixel[2]);
dstOut.setPixel(ox, oy, dstPixel);
protected int merge(float mergeFactor, int src, int dst) {
return (int) (mergeFactor * src + (1.0f - mergeFactor) * dst);
public void dispose() {
public static void main(String[] args) {
new TestCustomComposite2();
}I got a better version to work as expected. Though there will probably be issues with the transformation to display coordinates as mentioned before. At least figured out some of the kinks of using a custom Composite/CompositeContext object.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.image.*;
import javax.swing.*;
public class TestCustomComposite2
extends JFrame
implements ActionListener {
private JCheckBox useCompositeChk, useAntialiasingChk, useCompositeContextChk;
private Shape clippingShape = new Ellipse2D.Float(100, 100, 100, 100);
private MergeComposite composite = new MergeComposite();
public TestCustomComposite2() {
super("Test Custom Composite");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel cp = (JPanel) getContentPane();
cp.setLayout(new BorderLayout());
cp.add(new TestCanvas(), BorderLayout.CENTER);
JPanel panel = new JPanel(new FlowLayout(FlowLayout.LEFT, 0, 0));
panel.add(useCompositeChk = new JCheckBox("Use Composite", true));
useCompositeChk.addActionListener(this);
panel.add(useCompositeContextChk = new JCheckBox("Use Composite Context", true));
useCompositeContextChk.addActionListener(this);
panel.add(useAntialiasingChk = new JCheckBox("Use Antialiasing"));
useAntialiasingChk.addActionListener(this);
cp.add(panel, BorderLayout.SOUTH);
pack();
setVisible(true);
public void actionPerformed(ActionEvent evt) {
useCompositeContextChk.setEnabled(useCompositeChk.isSelected());
invalidate();
repaint();
private class TestCanvas
extends JComponent {
public TestCanvas() {
setSize(300, 300);
setPreferredSize(getSize());
public void paint(Graphics gfx) {
Dimension size = getSize();
Graphics2D gfx2D = (Graphics2D) gfx;
gfx2D.setColor(Color.GRAY);
gfx2D.fillRect(0, 0, size.width, size.height);
RenderingHints rh = null;
if(useAntialiasingChk.isSelected()) {
rh = gfx2D.getRenderingHints();
gfx2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Rectangle r = clippingShape.getBounds();
//gfx2D.setColor(Color.GREEN);
//gfx2D.drawRect(r.x, r.y, r.width, r.height);
gfx2D.setColor(Color.YELLOW);
gfx2D.fill(clippingShape);
Composite oldComposite = null;
if(useCompositeChk.isSelected()) {
oldComposite = gfx2D.getComposite();
gfx2D.setComposite(composite);
gfx2D.setColor(Color.ORANGE);
gfx2D.fillRect(r.x, r.y, r.width + 1, r.height + 1);
if(oldComposite != null)
gfx2D.setComposite(oldComposite);
if(rh != null)
gfx2D.setRenderingHints(rh);
public class MergeComposite
implements Composite, CompositeContext {
public CompositeContext createContext(ColorModel srcColorModel,
ColorModel dstColorModel,
RenderingHints hints) {
return this;
public void compose(Raster src,
Raster dstIn,
WritableRaster dstOut) {
// dumpRaster("SRC ", src);
// dumpRaster("DSTIN ", dstIn);
// dumpRaster("DSTOUT", dstOut);
// System.out.println();
if(dstIn != dstOut)
dstOut.setDataElements(0, 0, dstIn);
if(!useCompositeContextChk.isSelected())
return;
int[] srcPixel = null;
int[] dstPixel = null;
int w = Math.min(src.getWidth(), dstIn.getWidth());
int h = Math.min(src.getHeight(), dstIn.getHeight());
int xMax = src.getMinX() + w;
int yMax = src.getMinY() + h;
for(int x = src.getMinX(); x < xMax; x++) {
for(int y = src.getMinY(); y < yMax; y++) {
try {
// THIS MIGHT NOT WORK ALL THE TIME
int cx = x - dstIn.getSampleModelTranslateX();
int cy = y - dstIn.getSampleModelTranslateY();
if(!clippingShape.contains(cx, cy)) {
dstPixel = dstIn.getPixel(x, y, dstPixel);
dstOut.setPixel(x, y, dstPixel);
else {
srcPixel = src.getPixel(x, y, srcPixel);
dstPixel = dstIn.getPixel(x, y, dstPixel);
float mergeFactor = 1.0f * (cy - 100) / 100;
dstPixel[0] = merge(mergeFactor, srcPixel[0], dstPixel[0]);
dstPixel[1] = merge(mergeFactor, srcPixel[1], dstPixel[1]);
dstPixel[2] = merge(mergeFactor, srcPixel[2], dstPixel[2]);
dstOut.setPixel(x, y, dstPixel);
catch(Throwable t) {
System.out.println(t.getMessage() + " x=" + x + " y=" + y);
protected int merge(float mergeFactor, int src, int dst) {
return (int) (mergeFactor * src + (1.0f - mergeFactor) * dst);
protected void dumpRaster(String lbl,
Raster raster) {
System.out.print(lbl + ":");
System.out.print(" mx=" + format(raster.getMinX()));
System.out.print(" my=" + format(raster.getMinY()));
System.out.print(" rw=" + format(raster.getWidth()));
System.out.print(" rh=" + format(raster.getHeight()));
System.out.print(" tx=" + format(raster.getSampleModelTranslateX()));
System.out.print(" ty=" + format(raster.getSampleModelTranslateY()));
System.out.print(" sm=" + raster.getSampleModel().getClass().getName());
System.out.println();
protected String format(int value) {
String txt = Integer.toString(value);
while(txt.length() < 4)
txt = " " + txt;
return txt;
public void dispose() {
public static void main(String[] args) {
new TestCustomComposite2();
} -
Error while Creating user using Custome form
Hi,
I created a custom form same as create user form
updated in xlDefaultAdmin.properties,xlWebAdmin_en_US.properties,struts-config.xml
on this custom every thing is working fine but when on submit(Create User) it gives me below error
in Admin Console : You do not have permissions to perform this operation.
in App server log: maoRejections:You do not have permission to insert this object.My response is based on the following assumptions:
Your custom form is similar to that of CreateUser form in all manners. The logic at the back-end has been written by you as well. As soon as you get all the values you call the createUser API of OIM to create the user. You have wriiten your custom action classes as well.
The insert error may be due to the reason that the user which you are using to create the user doesn't have sufficient permissions. In other words, if this is done through Java code then while instaniating the API, the user used must be missing these permissions.
If the error is due to this permission for users then we can give these additional permissions to individual users, if in case its not and you have some other scenario then just give me more details, probably I can help you for it.
Thanks
Sunny -
Creating users using custom made class/UI in portal
This is what i have to achieve,
I need to create an interface in portal which will,
1. Create users in the OID where the users extend a class which i have created in OID with my custom attributes.
2. Then create them in portal and then assign them to default groups which will depend on a parameter in the user creation form.
From reading various documents in Metalink and OTN i have understood that the wwsec_api package allows us to do all this except that it is all for a user which will extend a predefined set of classes.
So i decided to do this
1.Make entries into the OID using the DBMS_LDAP package using commands like
emp_vals(1) := p_first_name;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'firstName',emp_vals);
retval := DBMS_LDAP.add_s(emp_session,emp_dn,emp_array);
2.Fire the wwsec_api.add_portal_user to create the portal user and then activate and assign him to the default group after running the provsyns.sql file
The problem i face is that i get errors when i execute the said procedure from any other schema other than portal.
When the procedure is recreated in the portal schema and executed it works fine.
So i decided to create the entire package in the portal schema itself.
Now the problem i face is that the proc would execute fine on the sql prompt but fail when called from the form created in portal based on this procedure.
I found out that the execution fails when the wwsec_api.xxx calls are made.
The exceptions are not specific and have the error code 1 => user defined exception
To have a workaround for this i directly inserted into the wwsec_person$ table with no values for the GUID column( I know this is not recommended but i gave it a try)
The insert worked fine but i still had to set his default group.I tried updating the rows for the user to set the default_group column but there seems to be a trigger on it which causes the update to fail.
Also when i check up the wwsec_person$ table there two rows for each user that i created ,one without the GUID/default_group and the other with the GUID/default_group.I guess this is because of the trigger.
If i try using the wwsec_api.set_defaultgroup api, the proc fails.
It is quite interesting to note that all the steps mentioned above, grant access to the user to portal.
But the place it fails is while setting the default group for the same which is of prime importance to me.
Also because I am inserting directly into the tables i have also to delete them when the user is deleted, this is because i again cannot execute the delete_portal_user in the wwsec_api package from the browser.
Surprisingly the wwsec_api.create_list function works fine.
Once i have created the users all the manipulations like changing group memberships etc become easy as i just modify the required details in the OID itself.
What i need is a proper/safe way to do what i have just mentioned above.
Please help out ASAP as this is urgent.
Regards,
KKBased on your requirements, you should go about things a little differently...
You have written your custom DBMS_LDAP code to create and populate the user entry including your custom objectclasses - good.
You don't need to create the user profile in the Portal schema at all.
To set the default group, just set the orcldefaultprofilegroup attribute in the user entry in OID. This should be set to the DN of the default group.
When the user logs on, his profile will automatically be created, and the default group will also sync up with the user entry in OID (patch required - 2830252).
Also, you should have DIP provisioning running so that updates to the orcldefaultprofilegroup attribute in OID are subsequently conveyed to the portal schema. It will also take care of automatically deleting the user profile from the portal if the user is removed from OID.
Please see the Portal Configuration Guide on how to enable and activate the Directory Integration Platform (DIP) provisioning integration between OID and Portal -
Configuration needed for SOA call to create PO in classic scenario
Dear Experts,
We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
Thanks and regards,
Ranjan
Ranjan SutradharHi Vardhan,
Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
Regards,
Nikhil -
Customer Master Create using CRMXIF_PARTNER_SAVE (IDOC)-documentation
HI All,
please send me some documents related to the following question
Customer Master Create using CRMXIF_PARTNER_SAVE (IDOC)
Regards,
Radha KrishnaHi Krishna,
Check out the documentation available on http://ifr.sap.com/catalog/query.asp
SAP CRM - 4.0 > Customer Relationship Management > Master Data > CRMXIF_PARTNER_SAVE
In the meanwhile I shall check if I have something better and more detailed.
Regards
Binai -
JDeveloper extension - custom composite templates
Is it possible to extend JDeveloper with SOA Suite extension (11.1.1.6) to create custom composite templates ?
When you create a SOA Project in JDeveloper, Step 2 of 2 (Configure SOA Settings) presents you with a list of seeded composite templates to choose from i.e Empty Composite, Composite with BPEL Process, Composite with Mediator.
Can I add my own templates that will contain pre-configured BPEL process settings, variables, XSDs etc? The idea is to standardize the development process by reducing the number of steps that a developer will have to do.
I have not seen any documentation that addresses this.
Thanks!
SunderI would love to have this feature. Something like the AIA service constructor but you can provide it with a template project and it creates the composite for you.
-
Populating custom idoc thro user exit.
Hi friends,
How can i populate an custom idoc thro user exit?.I haven't done user exit earlier.So Pls let me know in detail.
Thanks and regards.
tharunWhich standard Idoc did you extend? Is it outbound or inbound? Find out what the processing function module is. WEDI is the area menu transaction for all the IDoc related activities.
Once you know the function module, you can then find out what the user exit that is there in it. Then you can go to CMOD and in the menu, click on SAP Enhancements and then click on more options in the selection screen. Enter your function module name in the component there and execute the report. See which enhancement it is included in. You can then create a project in CMOD, assign this enhacement and select the user exit and activate the project.
Next within the function module, in the user exit function module, there will be an include. Double click on it and create upon prompt. After that, it is just your code to fill in the new segment and add it to EDIDD internal table of your function module.
Srinivas -
OIM 11g add custom role on user creation
Hi,
I when i create a user in OIM11g by default it gets added to "ALL USERS" role.
I have created a new role and want to add user to this custom role while creating users. How can i do this in OIM11g
Regards,
Ab
Edited by: 824473 on Jan 18, 2011 2:33 AMset Auto submit true. you can't set the value for ValueChangedListener property in current release of R2. This is bug and you can raise SR for same. But, this won't cause saving data into USR table. ValueChandedListener property for Modify User page only.
As you said, data is not being saved in the USR table then verify your steps again:
create sandbox->users->create user/edit user/view user details page->click customize->leftTopcorner->View->Source->select area->edit->Click Add Content (on left top)->Data Component catalog->scroll down and select User VO->Refresh dialogue box->select the field and click 'Add'->on dropdown select 'ADF Input test w/label/for view user page it should be output test w/label->close that window->Check if it added to create user form->save and close customization
for user detail page select "Managed User->UserVo1 " as datacomponent
Re: UDF creation on User form in 11gR2
for valuechangedlistener the fixes all ready available. you have to do some workaround as other poster has given in above link:
1.Create a sandbox and activate it. Open the page that contains the UDF, and click Customize.
2.Select View, Source.
3.Note the value of the valueChangeListener property of a predefined field. To do so:
a.Click the predefined field, and then click Edit to open the Component Properties dialog box.
b.Copy the value of the valueChangeListener property.
4.Export the sandbox as a ZIP file.
5.Extract the ZIP file and edit the jsff.xml file for the specific screen.
6.Add the following attributes to the ADF tag, for example af:inputText, for the UDF:
◦valueChangeListener=VALUE_COPIED_IN_STEP3
◦autoSubmit="true"
7.Create the ZIP file for the sandbox.
8.Import the sandbox.
9.Publish the sandbox.
Edited by: Nishith Nayan on Sep 21, 2012 1:04 PM -
Diff b/w "Customer exits" and "User-exit"
Hi,
What is the difference b/w customer exits and user-exit and also please explain me what are the various types of customer and user-exits.
Thanks in advance.
RamanaHi,
Types of Exits
There are several different types of customer exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. When you add a new menu item to a standard pulldown menu, you use a function module exit to define the actions that should take place once your menu is activated. Function module exits also control the data flow between standard programs and screen exit fields.
SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. These calls have the following syntax: CALL CUSTOMER-FUNCTION 001.
<b>User exits:</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/userexits%20in%20a%20transaction.doc
In order to find out the user exits for any tcode,
1. get the developement class of the tcode from SE93.
2. Now goto transaction SMOD and press F4,
3. give in the Deve class in the dev class and Press ENTER
this will show u the exits for any tcode.
or execute this report
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
Check out these links too...
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
USER EXITS
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
****Reward points if helpful.
All the best -
Issue with Update / Overwrite Partner functions after a customer is created
Hi All,
I have been using the standard program RFBIDE00 in LSMW to update / insert the business partners. I could update different partners for PY,SH after a customer is created but for only BP one more entry is getting added instead of updating the existing entry
Could anyone please let me know why this is happening.
SP Sold-to party 6353240
BP Bill-to party 6353240
*BP Bill-to party 6353538* ENTRY WHICH GOT ADDED
PY Payer 6353241
SH Ship-to Party 6353240
Thanks in Advance
Vijay....Hi All,
I have been using the standard program RFBIDE00 in LSMW to update / insert the business partners. I could update different partners for PY,SH after a customer is created but for only BP one more entry is getting added instead of updating the existing entry
Could anyone please let me know why this is happening.
SP Sold-to party 6353240
BP Bill-to party 6353240
*BP Bill-to party 6353538* ENTRY WHICH GOT ADDED
PY Payer 6353241
SH Ship-to Party 6353240
Thanks in Advance
Vijay.... -
Custom Field In User Registration Portal
Hello,
Is there a way I can add a custom field during user password registration in FIM 2010 R2? I want to have a field to set a User PIN where user can enter a value and it can be used in future by user or helpdesk when user is not able to answer other secret
questions. I can not add it as one of the questions in QA gate as I don't want it to appear in initial Q&A when a user tries to reset his password. It should only appear when he is not able to answer other questions.
Any ideas are welcome
Thanks,
NagendraUnless you plan to modify the core web pages then this is not supported out of the box. Modifying the core web pages isn't supported as far as I am aware so proceed at your own risk.
If this post has been useful please click the green arrow to the left or click Propose as answer -
Is it possible to edit a custom form created in SPD 2010 in Infopath 2010
I created a custom form in SPD, and need to use Infopath to further modify the form using features not available in SPD. But I can't get Infopath to open the custom form. Even if I selected the custom form in SPD and then click "Edit with Infopath"
in the ribbon, it still opens the default form. From list ribbon, it also always opens the default form, there is no way I can pick the form I want to edit.
Just want to confirm - Infopath can only edit default form (from SPD or the list ribbon), but not any form custom built in SPD.
Correct?Hi QuickLaunch,
When edit SharePoint list forms in Infopath 2010, it always opens the original default Edit Form of the list.
It is impossible to edit a custom form created in SPD 2010 in Infopath 2010.
I suggest you Customizing SharePoint List Forms
in InfoPath 2010 directly.
Best Regards,
Lisa ChenForum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Maybe you are looking for
-
Increase performance of the following SELECT statement.
Hi All, I have the following select statement which I would want to fine tune. CHECK NOT LT_MARC IS INITIAL. SELECT RSNUM RSPOS RSART MATNR WERKS BDTER BDMNG FROM RESB IN
-
My Macbook Pro feels slow and the hard drive is making a faint rattling noise.
I'm seriously considering taking it back to the Apple Store. I've had it for just over 4 months. The hard drive is a lot louder than it used to be and rattles faintly. I used to be able to open various large applications like Photoshop, Dreamweaver a
-
Cleared items reversal automatically
Hi Experts This is regarding mass reversal of cleared items that can be done in T.code FBRA Can anyone tell me how to do mass reversal of cleared items automatically. Is there any BAPI is existing for for automatic reversal of cleared items. Thanks B
-
This is my first go at using Photoshop and after downloading PS6 on my home computer and laptop last night through Adobes subscription, I immediately ran in to an issue on both systems which run windows 7. Issue: I am unable to create any type of v
-
Reg:Background jobs are failing with out logs
Hi Team, When i ran sm65 transaction in production i got the output. Test: Database table consistency test ==> Inconsistent step no. for following job(s): ACS_SAP_HR 14525701 ACS_SAP_HR