Best application to join audio and video?

So I've got video I've stitched together in imovie and the soundtrack I've done with Logic. Anyone help me figure out the best place to join them and print my movie? imovie seems a little clumsy - can't figure out how to completely ditch the audio from the original movie and add the whole soundtrack. Much thanks for any help!

QuickTime Pro.
Copy-All of the audio and then go to the video and Add to Selection.

Similar Messages

  • Best way to handle audio and video?

    Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
    Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
    Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
    http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
    Thanks for any help

    Yes that should work for what you want.

  • Joining audio and video together?

    Hi
    I want to join my audio to a video, and I don't mean to create a movie, all I wanted is to add the audio to the video...?
    Combining them into one I think...
    I've got a .mp3 audio file and I wanted to put that into my .mov audioless video, like joining them together (sorry I just can't get the right word)...
    Is there a way?
    Thanks

    To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Syncing audio and video with timecode

    What is the best way to sync audio and video files from a one camera shoot on which the camera was jammed with timecode from the mixer? Is there a batch method? Is it best done with a third party application or within Premier?
    Camera is Canon C300
    Adobe Premier Pro CC
    Windows Operating system
    The project is a 15 page short film shot over four days. Lots of dialogue.
    Any help would be greatly appreciated.

    Is "merge assets" different from "merge..."? I see the timecode option in "merge...".
    Thanks

  • Best audio and video players

    Hello folks!!!
    I bought a new Macbook.
    Can u guyz plz temme which audio and video players are the best on Macbook?
    Please gimme links to download.
    Thnx

    Good morning,
    I think a generally agreed upon fact is that [VideoLAN - VLC media player|http://www.videolan.org> is one of, if not the, best players available for videos on the Mac.
    As for audio players, iTunes which is included with your MacBook.
    Hope this helps! 
    David

  • Lync 2013 and Macbook Pro (can not complete the call ) on audio and video call

    hi everyone ,
    we installed lync2013 server on windows 2012 server .Windows client working perfectly without any problems but we have some MacBook pro (maverick) with lync 2011 installed (14.0.8) .Mac clients can log in , make Instant messaging but can not make audio and
    video calls at the moment.When  I had done some logging on lync server , I ifigured out the following error message  which is
    "Start-Line: SIP/2.0 401 Unauthorized"
    TL_INFO(TF_PROTOCOL) [LYNCFE\LYNCFE]15EC.26C8::05/30/2014-13:08:46.224.00000BF4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [3440658878]
    Trace-Correlation-Id: 3440658878
    Instance-Id: 10DF1
    Direction: outgoing;source="local"
    Peer: 10.45.40.22:54285
    Message-Type: response
    Start-Line: SIP/2.0 401 Unauthorized
    From: <sip:[email protected]>;tag=118c2f6503;epid=1dac663933
    To: <sip:[email protected]>;tag=59BF4D7B62264F8A815140BEC75A72BC
    Call-ID: b50d1d78ea20324eb00dbe3ed316c4b6
    CSeq: 2 INVITE
    Via: SIP/2.0/TLS 10.45.40.22:3540;received=10.45.40.22;ms-received-port=54285;ms-received-cid=243800
    Content-Length: 0
    $$end_record
    any ideas related with this error  ???
    1-I had tried 3 different mac book with 4 different user account
    2-Fresh installed lync 2011 on each MacBook ,

    Hi,
    Please try to clear all preferences for Mac Lync.
    You can do as following steps in the link:
    http://www.unicom.iu.edu/kb.php?docid=bave :
    1.  Quit Lync for Mac.
    2..In your Home folder, open the Library folder. Note that Mac OS X 10.7 and later hides your Library folder. To access it:
           1. Press Command-Shift-g, or from the Go menu, select Go to Folder... .
           2. In the Go to Folder drop-down window, enter ~/Library, and click Go.
    3.  Remove the following files from your Library folder:
              /Users/username/Library/Preferences/com.microsoft.Lync.plist
              /Users/username/Library/Preferences/ByHost/MicrosoftLyncRegistrationDB.xxxx.plist
              /Users/username/Library/Logs/Microsoft-Lync-x.log (This file is present only if you turned on Lync Logging.)
              /Users/username/Library/Logs/Microsoft-Lync.log
    4.  In your Documents folder, remove the following:
              /Users/username/Documents/Microsoft User Data/Microsoft Lync Data
    5.  Optionally, also remove Microsoft Lync History:
              Users/username/Documents/Microsoft User Data/Microsoft Lync History
              Note: This optional step will delete saved conversations. For Mac users, the conversation history is not saved to the Exchange account, but instead is saved locally
    to the Mac.
    6.  Open Keychain Access from the /Applications/Utilities folder:
         1. Delete any keychains on the left that look like the following, where emailaddress is your email address: 
    OC__KeyContainer__emailaddress
         2. In your Login keychain, delete the following, where emailaddress is your email address: 
    emailaddress.cer
    7.  In the /Users/username/Library/Keychains folder, delete all files that look like the following, where emailaddress is your email address: 
    OC__KeyContainer__emailaddress  
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How do I combine separate audio and video files into one Quicktime movie?

    I have DVDs that contain separate audio and video files in folders marked Audio_TS and Video_TS. I would like to know how to combine these files into a single Quicktime movie. Is there inexpensive or shareware software that imports and unites these files reliably? A simple solution is preferred, rather than getting into complex media editing applications.
    G4 eMac   Mac OS X (10.4.9)  

    Doug - the VOB files (in the VIDEO_TS folder) are MPEG-2 files. MPEG-2 have the video and audio mixed into the one file - there are no audio files to combine.
    The rest are directions to a DVD player (e.g. the BUP and IFO's) . The AUDIO_TS folder is used for DVD Audio discs and on video DVDs is always empty.
    Many people use Handbrake or iSquint to convert VOB to iPod video though MPEG Streamclip is the best - open the first numbered VOB and it will prompt you to open all of them. ALWAYS fix timecodes when it asks. You can then edit/trim and export to MPEG-4.

  • Poor audio and video quality when in conference

    I have a customer with poor quality in audio/video conferences.
    P2P is going really well, there are no problems with sharing desktops and applications until they try to share a powerpoint presentation OR invites a third participant. The behaviour is the same even if the two users are on different network sites with a
    WAN between them. Perfect audio and video until sharing ppt or inviting third participant.
    The environment is as follows
    3 hardware front end servers, two edge servers, Office web apps farm with two servers. All web services are loadbalanced with BigIP. There is a cisco firewall between clients and servers. QoS is implemented on clients, edge and FE-servers. Latest CU on all
    servers. approx 390 users now(pilot) should be approx 6500 when fully deployed. There is another pool with same setup, but we do not have users on that pool yet. Users do not have internet.All conversations going bad are classified as green in monitoring reports.
    No extreme values in the reports. Clients are running no policies, all servers are default. Servers are flatlining. approx 20 video calls a day at this point e.g. there si more than enough capacity in the network and on the servers.
    At this point I suspect either packet inspection on the cisco firewall OR some odd configuration needed on the Frontends. 
    I have asked the network guys if there is a packet inspection being done on the firewall, and if there is done anythong to optimize this.
    I have read about the conferencing policy but do not understand what maximum limits should have anything to do with it.
    I am not sure where to start here.

    Hi,
    The media traffic bandwidth usage can be challenging to calculate because of the number of different variables, such as codec usage, resolution, and activity levels. The bandwidth usage is a function of the codec used and the activity
    of the stream, both of which vary between scenarios. The following table lists the audio codecs commonly used in Lync Server 2013 scenarios.
    You can refer to the link below of “Network bandwidth requirements for media traffic in Lync Server 2013” to check if the network bandwidth match the requirements (especially for conference
    situation):
    http://technet.microsoft.com/en-us/library/jj688118.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Audio and Video Chat

    Hello Sir
    I would like to create a Audio and video chat application,
    if any one have the source code related to voice chat. plz mail it to i need it ,thanks in advance.
    my mail id
    [email protected]

    Welcome to Apple Discussions!
    YES! In fact I set up my own PC machine to test. Follow the windows tip section that can be found at: http://www.mvldesign.com/videoconferencetutorial.html
    It's also best to make sure your set-up is working correctly by testing with a known mac user that has no issues. This way you can troubleshoot where the issue lies.

  • How to get audio and video in one file

    hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

    There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
    To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
    You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video.  Delete the old, no-longer-synced audio and you should be set.

  • Audio and video sticking and jumping after installing windows 8.1

    Hello, 
    I have a HP Pavilion G6 - 2292sa
    The product no is C1Y93EA#ABU
    I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related. 
    Any help you could give would be really apreciated. 

    Hi Greum,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been  unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
    I suggest you run The HP Support Assistant to look for updates and help resolve issues.  You also have a built in troubleshooter in Windows 8 and 8.1.
    Press the Windows key +C to open charms
    Type troubleshoot audio/video and press enter
    Follow the on screen prompts.
    If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
    Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Here is a link to a document to assist you with  updating.Updating Windows 8 to 8.1.  Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Instant messenger programme that supports audio and video from mac to pc

    hi
    can anyone recommend a good IM programme that gives audio and video from a mac to a windows based pc.i am using an isight on my mac and the person at the other end is just using a bog standard web cam.i tried yahoo but didnt realise it doesnt support audio for the mac, arghhhhhh. i have also seen something called mercury messenger is this any good.i have an ibook g4 running osx 10.4 and other end using win xp
    many thanks karl
    ibook g4   Mac OS X (10.4.6)  

    Hi kb1483,
    iChat to AIM 5.9 or Trillian works for me.
    FAQ on subject http://discussions.apple.com/thread.jspa?threadID=406147
    But then I wrote that FAQ and this is a Discussion area on the device Apple produced to work with iChat.
    EZ Jim's FAQ on subject http://discussions.apple.com/thread.jspa?threadID=433863
    EZ Jim's FAQ on applications that work with an iSight
    http://discussions.apple.com/thread.jspa?messageID=607501&#607501
    Another help site on subject http://www.mvldesign.com/videoconferencetutorial.html
    4:17 PM Tuesday; May 23, 2006

  • 8.1 Pro install now have no audio and video play

    I have an older G60-443cl and changed out the HDD for a SDD.  Installed a new version of Windows 8.1 Pro.  Everything works but my audio and video.  The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume.  I went to my adminastrative tools and checked and the following is what i guess i should have:
    Open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Startup Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    I have all of the item but the top one Audio Service????     Help!!!!! Please!

    Hi @L1215 ,
    Welcome to the HP Forums!
    It is a grand place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio.  Drivers are showing as installed and working properly but you have not audio.
    When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System.  With this being said HP does not provide the drivers as it is an untested OS on your system.  OEM's may and sometimes do alter drivers to perform correctly with your system.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
    The best of luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Connecting Macs to Samsung Smart TV #UN55F7100AFXZA for Audio and Video form the TV

    I have a all Latest, Macbook pro, Macbook Retina and Imac 21.5" i brought a samsung smarttv, and its model number is UN55F7100AFXZA and i need to connect any of my product to the Tv, i need the video and audio coming from the Tv so how can i do this?????? budget is no limit, for a costly tv like that i dont  mind so i need you mac geniuses to help me connect any of my products to the Smart tv perfectly so the Audio and Video comes out of the TV, this is my first discussion and juust got my products 3 days ago so i did not try anything i will go with your opinions so at the end i would like to say is i want my Apple Product ( listed above ) to connect to Samsung Smart tv and Get audio and vdeo from the TV.
    Thank you in Advance
    (if you can solve it)
    i will make a youtube video prasing your name

    Hi Kingofmacs,
    Thanks for visiting Apple Support Communities.
    If your MacBook Pro and TV both have HDMI ports, you can use an HDMI cable to connect the two.
    This article can help confirm that your MacBook Pro has the necessary HDMI port:
    Mac Basics: Ports and connectors
    http://support.apple.com/kb/HT2494
    Ports on a MacBook Pro with Retina display:
    You may need to use an adapter to connect your iMac to your TV. This article has more information about Apple video adapters:
    About Apple video adapters and cables
    http://support.apple.com/kb/HT3235
    Once your TV is connected to your Mac, you can configure it using the Displays section of System Preferences. See this article for more information:
    OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
    http://support.apple.com/kb/ht5019
    Best Regards,
    Jeremy

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

Maybe you are looking for