Best configuration for Transport System

Hi everyone
I like to know what is the best way to configure my transport system.
We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
Thks.

Hello Emerson,
You don't have Development system?
In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
Please read TMS configuration guide and take necessary actions.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
Thanks,
Siva Kumar

Similar Messages

  • Best Configuration for running adobe Premiere Pro CS3

    I have a 4 HDD system and the ability to run RAID.  What is the best configuration to run Adobe premier pro CS3.  I want to be able to get the best perfomance out of my system.

    Is it possible to run different RAID combination using the same controller card?
    For example:
    1) 2 HDDs, RAID 0 configuration for Operating System/Programs
    2) 2 HDDs, RAID 0 configuration for Project/Scratch Disk/Paging
    3) 2 HDDs, RAID 0 configuration for Media/data.
    I have a Asus Striker Extreme Motherboard.

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • GRC AC 10 (RAR/CUP/ERM) configuration for EP system

    Hello Gurus,
    We are aware of configuring RAR/CUP/ERM in GRC AC 10 for ERP system(back-end)
    Are there any documents /links to provide information on configuring the above components for EP system ??
    Or rather specific which of the following configuration is possible for EP system ?? CUP /RAR/ ERM ??
    Also going further , is there any way in which we can configure the same for BO system ??
    I am not quite sure if there is any PLUG-In as such which is available for BO system or not .
    But in my opinion there is no need to perform configuration for BOBJ system as the roles in them are imported from Backend system (ERP/BI etc) , hence if these roles are already taken care during ERP system cleanup and SOD analysis , there should be no need to configure seperately RAR/ERM/CUP.
    Please provide your comments.
    Regards,
    Victor

    Hello Prasad,
    Thank You for your quick response .. the info was quite helpful.
    Will you please put some light on aspects of integrating AC 10 with BO ??
    Is there any connecter available for it?? Which scenarios are possible ??
    Humbly Requesting your help.
    Thanks in advance.
    Regards,
    Victor

  • Can Central System administration be configured for JAVA systems?

    I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
    Can some one tell me, can it be configured for JAVA systems like Portal?
    Thanks
    Aditya

    Hello Aditya
    Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

  • Best configuration for maximum WiFi speed?

    Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch.  I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st?  Like I said I am really confused. Any help you can offer would be appreciated.
    Thanks in advance,
    Vic

    For the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
    The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
    This picture may help:
    From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

  • Infamous "Recovery policy configured for this system contains invalid recovery certificate" message

    Hello,
    On a Windows 2012 R2 member server of a Windows 2012 domain, I tried encrypting a folder, and I got a "Recovery policy configured for this system contains invalid recovery certificate message."  This is the first known attempt
    at enabling EFS within our organization.
    When I looked at the EFS certificate within the Default domain GPO, it had expired.
    Is it as simple as deleting and recreating the EFS certificate within the Default domain GPO?  Then running gpupdate /force on the Windows 2012 member server?
    Thanks
    Ron

    You can give a look to that: http://blogs.technet.com/b/askds/archive/2008/01/07/replacing-an-expired-dra-certificate.aspx
    More if you ask them here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=migratedforums&filter=alltypes&sort=lastpostdesc
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

    I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

    Just to explain what I just wrote to Laundry Bleach:
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • CTS+ what is a best option for transport domain?

    Hello Experts,
    What is a best option to confugure CTS+ regarding the transport domains?
    Should it be simpe and single transport domain at SOLMAN system and all satellite systems assigned to this single transport domain OR should I keep existing transport domains for satellite systems and connect them via domain link with SOLMAN?
    Any  ideas please?
    Thanks!

    hI,
    Normally if you have non abap system in your landscape then you can have solman domain as both communication system and Transport domain, then maintain the TMS domain configuration in solman itself
    If you want to maintain ABAP separated system as communication system then this case you have to create the domain link between communication system transport domain and the solamn domain
    Chk this CHARM Configuration Problem
    Thanks,
    jansi

  • Best Practice for setting systems up in SMSY

    Good afternoon - I want to cleanup our SMSY information and I am looking for some best practice advice on this. We started with an ERP 6.0 dual-stack system. So I created a logical component Z_ECC under "SAP ERP" --> "SAP ECC Server" and I assigned all of my various instances (Dev, QA, Train, Prod) to this logical component. We then applied Enhancement Package 4 to these systems. I see under logical components there is an entry for "SAP ERP ENHANCE PACKAGE". Now that we are on EhP4, should I create a different logical component for my ERP 6.0 EhP4 systems? I see in logical components under "SAP ERP ENHANCE PACKAGE" there are entries for the different products that can be updated to EhP4, such as "ABAP Technology for ERP EHP4", "Central Applications", ... "Utilities/Waste&Recycl./Telco". If I am supposed to change the logical component to something based on EhP4, which should I choose?
    The reason that this is important is that when I go to Maintenance Optimizer, I need to ensure that my version information is correct so that I am presented with all of the available patches for the parts that I have installed.
    My Solution Manager system is 7.01 SPS 26. The ERP systems are ECC 6.0 EhP4 SPS 7.
    Any assistance is appreciated!
    Regards,
    Blair Towe

    Hello Blair,
    In this case you have to assign products EHP 4 for ERP 6 and SAP ERP 6 for your system in SMSY.
    You will then have 2 entries in SMSY, one under each product, the main instance for EHP 4 for ERP 6 must be central applications and the one for SAP ERP 6 is SAP ECC SERVER.
    This way your system should be correctly configured to use the MOPZ.
    Unfortunately I'm not aware of a guide explaining these details.
    Some times the System Landscape guide at service.sap.com/diagnostics can be very useful. See also note 987835.
    Hope it can help.
    Regards,
    Daniel.
    Edited by: Daniel Nicol on May 24, 2011 10:36 PM

  • CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

    Hi,
    Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
    Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
    We are using NWDI system for transporting our portal transports.
    Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

    Hi Naveen,
    Please find given below BBPCRM & SAP_BW version..
    BBPCRM     500     0013     SAPKU50013     BBPCRM     BBP/CRM Supp. Pack.
    SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse     Component Supp. Pkg.
    This problem is not only with  Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
    Regards,
    Suresh

  • Netgear Stora, what is the best configuration for smooth operation

    I have a Netgear stora, and I know how to configure the best possible way this system for Mac NAS. It always gives me problems and the NAS system invites me to visit the Apple community.
    In Windows XP system and Windows 7 works correctly.
    Can you help please, I do not know if you need another type of program, or if my mac must have a particular program to work or any particular update, since this update to version 10.7.4.
    Thank you very much.

    thanks Rick
    what about the differences in the two processor
    options.
    is there really a noticeable difference?
    thanks
    niko
    I seriously doubt that there would be. My 2.16Ghz iMac is plenty fast and I doubt that most people would be able to tell the difference between it and the 2.33. By FAR the most important upgrade is RAM. Don't get the extra RAM from Apple though -- it's too expensive and the RAM is easily upgradeable. Buy it from Crucial and install it yourself. I got 2 gigs from them for $85 plus shipping. Just remember, there are only 2 RAM slots so if you want to max it out at 3 gigs you will have to get a 2 gig stick and a 1 gig.

  • Best Configuration for Laptop

    I just purchased, and upgraded, a laptop that has:
    GTX 470 (3 GB dedicated video)
    24 GB DDR3 RAM
    120 GB primary internal SSD (C Drive) (up to 550MB/s read, up to 500MB/s Write)
    480 GB second internal SSD (D Drive) (up to 540MB/s read, up to 460MB/s write)
    i7 processor
    I shoot with 3 Sony HDR CX550V's. They of course compress to H.264...
    So, what is the best way to setup this laptop? Basically, I installed the OS and software on the primary drive. Then I opened up premiere and created a blank project and setup "Media" and "media cache" under project settings to store in a folder on the D drive. I assume I don't want anything on the primary drive, no cache, no renders, just keep it clean.
    But the C drive is faster and I would like your professional, experience opinion as to how to best configure this. Should I render out to the C since it has faster write? Should I store cache on C in a folder that I clean out every now and then? Data files on D? etc...
    This laptop has a thunderbolt port too, and 4 USB3.0, it's an Asus laptop. I have an external drive, but it's RDD, 7200 RPM's. I could get an external SSD but for the most part I don't want to use an external drive in my workflow. However, for bigger projects if there's a major advantage I may need or at least want to do that. So, suggestions for this scenario would be appreciated too, but mostly curious about the best way to deal with my internal drives. I am curious if there would be a big difference expected with an external drive(s) in the mix...

    Also, please be specific, like where to put what:
    Project (premiere project files)
    Scratch (video/audio previews)
    Source files, my H.264 files that is)
    Exports (Renders)
    "Media Cache Files" and "Media Cache Database" under preferences/media
    And anything else specific that would be helpful to know.
    Thanks!

  • Whats the Best Configuration for Professional Photographers ???

    Hello Everybody,
    Can Please somebody tell Me Whats the Right Configuration for a Photographer I am Into Photography and Have to edit files (Photos ) upto 35 - 60 Mb size In Photoshop CS4 or Phase One Software which itself takes about 1GB of RAM I think Is The New 20" iMac 2.66Ghz with 2Gb RAM enough or do I need a 4GB RAM ??? This is the first time I will be going for a Apple Product so have no Idea about the System Please let Me know as Soon as Possible
    Thankyou

    I think any of the current models would be up to the task. But since you are a pro photographer, you might consider NOT getting the base line 20" model and instead upgrading to the 24" model. Not only do you get a bigger screen to work with when editing your photos, but it also comes standard with 4GB, twice the memory of the 20" model.
    Patrick

  • Best configuration for video editing ?

    my boss wants to buy a best computer for our future projects. we are a small studio so we don't have really big budget. so I am thinking 2.66 cpu, 4gb memory, x1900 graphic card...
    we are going to do, some 3D and video editing, and all other graphics stuff.
    any suggestions?
    do I need 8core or 4 core 3.0 cpu?

    I don't know if you have seen it
    but in [this thread:http://discussions.apple.com/message.jspa?messageID=5800151#5800151 we (so far two forum members and I) discussed about machine configuration options and other technical aspects!
    I wish to insist on a point, do test (if you can) and read a lot before you buy!
    Best,
    G.

Maybe you are looking for