Netgear Stora, what is the best configuration for smooth operation

I have a Netgear stora, and I know how to configure the best possible way this system for Mac NAS. It always gives me problems and the NAS system invites me to visit the Apple community.
In Windows XP system and Windows 7 works correctly.
Can you help please, I do not know if you need another type of program, or if my mac must have a particular program to work or any particular update, since this update to version 10.7.4.
Thank you very much.

thanks Rick
what about the differences in the two processor
options.
is there really a noticeable difference?
thanks
niko
I seriously doubt that there would be. My 2.16Ghz iMac is plenty fast and I doubt that most people would be able to tell the difference between it and the 2.33. By FAR the most important upgrade is RAM. Don't get the extra RAM from Apple though -- it's too expensive and the RAM is easily upgradeable. Buy it from Crucial and install it yourself. I got 2 gigs from them for $85 plus shipping. Just remember, there are only 2 RAM slots so if you want to max it out at 3 gigs you will have to get a 2 gig stick and a 1 gig.

Similar Messages

  • What is the best configuration for 2 AP's Broadcasting? same SSID/channel?

    So i have 2 WRT54G version 2.0 wireless routers. They are not doing DHCP for my home network, i have another device (Sonicwall Firewall) that is taking care of that. Originally I had 1 wireless router (acting as just an access point, but I now have an additional one and want to add it to extend wireless coverage.
    My question is this. How do i make it so that laptops can roam around my house and switch from AP to AP depending on which one has the best signal? Is this possible?
    I figure that i would have to obviously disable DHCP on each router. But what about SSID's. Can they be the same? What channel should i use, the same for both, or different channels?
    Any help would be awesome, Thank you!
    -Aaron

    For a roaming network both access points must have the identical SSID and identical security settings. Regarding the channel it is difficult to say. They should be different as broadcasting on the same channel creates interference. Better whould be to use non over-lapping channels, e.g. channel 1 & 6. The problem, however, are the clients. Some clients have difficulty with roaming across channels.
    I had two access points with channel 1 & 6. My laptop worked fine in all locations with interruption. However, my WiFi-IP-Phone had troubles. It seems to search the channels from 1 up, thus I was able to roam from channel 1 to 6 but never back. The phone just disconnected.
    So, I would recommend to use different channels and test if your clients can roam without problems. If you'll find that one does not properly work try to put them on the same channel. Also: be patient when changing the configuration. I would even recommend to power cycle the router after each change of channel as well as the client. In the beginning I never did that and very often it did not work in the beginning but after an hour it work. I suppose this was because I was using WPA2 and some problems due to the rotation encryption keys WPA2 is using...

  • What is the Best Configuration for using SSD & HDD Internal Drives in iMac?

    Hi,
    I have a Refurbished 2011 21.5" iMac. It came with a 1TB HDD. I had a 120GB SSD custom installed by Other World Computing.  I would like to reap the speed benefits of having the OS and applications reside on the SSD and having most of my heavy, frequently used data on the HDD.  I've considered simply going the route of changing the advanced settings of my user configuration so that my home directory is located on the HDD.  I've read this is an ok solution, but that there may be better ways to do this to get the best out of the available speed of the SSD.  Could anyone recommend better options?
    For reference, I use apps like Photoshop Lightroom, the NIK suite of photo editing applications and Photoshop CS6 pretty heavily.  I don't do much movie editing or production...only occasional slideshows in iMovie...although I do keep a lot of old, imported, video footage of my kids on my HDD and on my backup system.
    Thanks,
    Ben Shugart

    Start with the only Apple doc I could find: http://support.apple.com/kb/ht5446. They tout the technology, but don't provide much in terms of help.

  • What's the best configuration for a 300+ GB music library?

    I'm about to buy an iMac. I want iTunes to run seamlessly. Assuming I purchase the 20" what else should I include? 2 or 2.4 GHz? 1 or 2 GB of Ram? How much internal HD space? I am happy to consider purchasing external HD space. I will be using it mostly for word processing and some low-tech music/video editing. Thanks in advance.

    Before I got my new iMac (20" 2.4 ghz) I had my music library, which is about 50 gigs stored on a LaCie external hard drive connected through FireWire 400 and had no problems. As for your other question your LaCie hard drive (like mine it seems, just checked system monitor) may only be capable of 400mb/sec. I'm not sure about their new hard drives but mine is a little more than a year old so this may be the case with yours as well.
    Time machine is apple's system backup program.
    Message was edited by: abriggsknox
    Message was edited by: abriggsknox

  • What is the best configuration for XP on a MacPro?

    Situation: Macpro (the old one)
    3 hardrives; 1st is the Mac OSX HD
    2nd Windows XP
    3rd Extra Data
    this is how my setup is, but i notice my computer makes a louder noise as before, why is this?
    would you recommend this setup or install XP on the same drive as Mac OSX?
    which one works best?

    Hi Dion,
    when you had OSX and Windows on one HD, was this the only HD in your Mac Pro or do you had all three HDs back then too ?
    Cause the more HDs you have in your MAc Pro, the more heat they produce, which can result in higher fan speeds and/or a more often up-spin of the fans.
    The startup of XP (after the 'Option'-key choice) is indeed rather slow, at least much slower than OSX.
    My guess is that the BIOS-to-EFI emulation that OSX makes to enable XP to boot is taking some time.
    XP is only using the HD on which it is installed, because the other HDs are unknown to it, unless you use something like MacDrive to access your OSX partitions while in XP.
    And since the energy-saving features of your Mac Pro used with OSX are mostly unknown to XP (due to lack of appropriate drivers) it is possible, that the fans are running more often and/or at higher speeds than they do in OSX.
    Stefan

  • I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

    I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

    Just to explain what I just wrote to Laundry Bleach:
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
    There is some info on these pages :
    developer site : https://developer.apple.com
    developing for iOS 7 : https://developer.apple.com/ios7/
    developer support : https://developer.apple.com/support/
    developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

  • What are the best practice for CQ5.5 configuration?

    Hello,
    What are the best practice for CQ5.5 configuration which handle for High availability.
    Last time I had a issues on server when I was uploaded 2 GB of DAM and then after that the server is not able to start and always getting error regarding Tar Persistance.
    So kindly request you to please let me know what are the best apache felix configuration.
    Thanks in advance...
    Regards,
    Satish

    Hi,
    A DAM upload, regardless of the size of the assets, never should result in TarPM problems, unless you run into an OOM, which left the repository in an unclean state. So if you regularly do DAM uploads of that size, you should check the Garbage Collection logs and probably adjust the heapsize if necessary. You might want to limit the number of concurrent running workflows to keep the memory consumption a bit lower.
    To your question: HA in a traditional sense you cannot achieve with a single box, even with optimized settings. In an author usecase you would need clustering.
    Jörg

  • What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    The best cover is the one that suites your needs. Try Google. There are dozens on the market.
    As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

  • What is the best app for Maintenance/Cleanup for my mac? Do I need Virus Protection?

    What is the best app for Maintenance/Cleanup for my Mac? Do I need Virus protection?

    How to maintain a Mac
    Make two or more backups of all your files
    One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
    Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
    In fact, don’t rely exclusively on any single backup method, such as Time Machine.
    If you get an indication that a backup has failed, don't ignore it.
    Keep your software up to date
    In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
    Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
    Don't install crapware
    ...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
    It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
    As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
    Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
    Don't install bad, conflicting, or unnecessary fonts
    Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
    Deactivate or remove fonts that you don't really need to speed up application launching.
    Avoid malware
    "Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
    There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    Don't fill up your disk or SSD
    A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
    While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
    Relax, don’t do it
    Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
    A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • What's the best approach for handeling about 1300 connections in Oracle.

    What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
    1.Using separate schema s for various type users(We can store only relevant data with a particular schema.     Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema     Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
    OR
    2. Using single schema for all users.
    Note: All users may access the same tables and there may be lot of records than previous case.
    What is the Best case.
    Please give Your valuable ideas

    It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

  • What is the best antivirus for MacBook Pro?

    What is the best antivirus for MacBook Pro?

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. XProtect, Gatekeeper, and MRT reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • What is the best skin for new Macbook Air 13"?

    What is the best skin for new Macbook Air 13"?
    I have a new Air and want to protect it from scratches and such.
    Thanks in advance

    Sorry, I don't like "skins". They inhibit the heat transfer necessary to keep your MBA cool. Get a soft or hard case to store it when not in use. I like Speck products.
    Just take care of it. Battle scars make it uniquely yours.

  • Water damaged iPhone 5c. what is the best thing for me to do?

    i dropped my brand new iphone 5c in water. what is the best thing for me to do? should i just go straight to apple? and how much would i be looking at?

    Fact is, the chances of fully recovering from water damage, on an iPhone, are extremely low. Your best bet is to belly up to the bar & pay Apple the out of warranty exchange fee: US $269. Make an appointment at any Apple store.
    Good luck.

  • What is the best solution for me to run Microsoft Access on my brand new iMAC?  Assume I'm a casual user.

    What is the best solution for me to run Microsoft Access on my brand new iMAC?  Assume I'm a casual user.
    I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
    Comments encouraged.  Thank you in advance for your consideration and help.

    You would have to install Windows, then install Microsoft Office Professional for Windows on it  To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
    You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
    www.libreoffice.org

Maybe you are looking for

  • Installing Windows XP pro from a ZIP file

    Hi, I bought a OEM copy of windows XP pro. It comes in a ZIP file. Is there a way to install it using Bootcamp directly or must I first create a CD with this file? Also, is there a difference in using the 64 bit version instead of the 32? Which one i

  • Why can't get my photos in photo stream to transfer to I photo, shows up as black space with name only

    How do I select then send Photos from photo stream to I Photo to edit? My photo ends up not transferring or is shown as black space with name below, without photo in I Photo. Any one have an answer?

  • IPhoto '09 upgradeable?

    iPhoto '09, version 8.1.2 is what I currently have on my Mac desktop. I have over 10,000 photos and I would like to upgrade to the new iPhoto version so I can share photos with my other iOS devices. BUT...I am terrified I will lose all these photos.

  • Re: Background job

    Hi,        In my program iam using this function call function 'LIST_TO_ASCI'   so what ever the output placed in list is transfered to end customer in the textfile format , my problem is when i set in background job, some records are missing , is th

  • IMPORT OR SYNC CONTACTS TO iCLOUD

    HOW DO YOU IMPORT OR SYNC CONTACTS TO iCLOUD? DO NOT MEAN UPLOAD vCARD, BUT SYNC WITH EXISTING CONTACTS LIST