Best way to Export HD footage for SD DVD

Hi all,
I have a Sony HDV-HC7 camera and record everything in HD. I've captured the footage into final cut pro as HDV - 1080i60, then did some editing on the time line. Then, I went to File + Export + QuickTime Movie... This is where I'm lost. What should my Setting drop down be if I want to import to DVD Studio Pro and burn to SD DVD.
Thanks in advance.
mdawg

Or....
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
Shane

Similar Messages

  • Best way to export individual tracks for mixing on other software

    I've recorded a song with my band, it has 14 tracks in total.
    We have a friend who is a pretty good engineer and I want to export the tracks from GB to give him so he can mix/master.
    What is the best way of doing this?
    I've done a bit of googling and found two options:
    (1) Find the GB track in the finder and use the 'show package contents' to locate each individual part
    (2) Solo each track and use the GB share function
    I have concerns with both options, with (1) not all the tracks begin at the start of the song so I will end up with lots of tracks of random length with no way to sync them properly.
    With option (2) I am concerned GB will do it's own mixing and not give me the raw versions.
    Any advice?
    Oh, and a quick other question. If I have recorded vocals for verse 1 on track 1 and then the chorus on track 2, I can click and drag the chorus section onto track 1 but click & drag needs a steady hand not to get it slightly out of place. Is there a keyboard shortcut for this?
    Thanks

    HangTime wrote:
    how i'd do it ... since i'm going with the export route (and in this case i would definitely go that route rather then trying to piece together all the bits and keep them in time), i'd want to start my (continued) project with everything at their best levels possible, i wouldn't want to waste any of my 24 bits
    Thanks for the reply.
    On this one issue, however, I would think that raising the volume on GB tracks prior to exporting to another DAW would have no effect on the number of bits used or wasted. The number of bits used would be an issue during the initial recording, and then when creating the eventual stereo mix. But the intermediary stage at which you transfer from GB to another DAW is "bit agnostic." Aside from transferring the files, there's nothing special about if from an audio perspective - increasing volume can't create more "original" information on each track/bit beyond the initial recording. Rather, it's the equivalent of adding a digital volume level increase on a track which you can do at any stage, like after the tracks arrive in their new DAW, with the same effect.
    In other words, as I understand it, increasing the levels in GB prior to bringing them into another DAW or after you bring them into another DAW is equivalent as far as the original (or ultimate) meaningful bit information is concerned. Therefore, you might as well provide the tracks in as unadulterated form as possible, and allow the engineer of the subsequent DAW to apply any digital effects, including volume increase, as needed.
    at a technical level, that's probably true. however GB does not output garbage, under the hood it's the same engine that logic uses. it may be a consumer level GUI, but the guts are professional level.
    Absolutely!

  • Best way to export iMovie project for editing

    I am creating an iMovie project in iMovie 09 with a friend. I have part of the movie and he has the other part (basically I have put together a lot of the video and some transitions, and he is going to put in some music he created and add a couple of other cool things). I have created my part of the movie and I would like to send the project to him so that he can add his part to finish the movie. I am not sure what the best method is to save my iMovie project so that I can sent it to him. I don't want to export it to something he can't work with on his end.
    I am thinking that if I save the project as a QuickTime movie it will allow him to open open the file in iMovie and then he can add his stuff. I was also thinking about ways of exporting to mp4 format as I know this is a format that iMovie likes, and he could open this up in iMovie. I wasn't sure, though, how to make sure I save the movie project as a mp4.
    Do you all have any thoughts or suggestions on this?
    Thanks,
    Tim

    I don't think I have the answer, but if you don't mind I'm going to drop into your discussion because I have a similar issue and am interested in any solution someone may give you. I have a couple of iMovie project files because, like you, I have two people working seperately, and I just want to combine them as a single project.
    I was able to move both projects to one computer by moving the iMovie projects to an external hard drive and then opening them both up from the same computer. That solution probably doesn't solve your issue, though.

  • Best way to export a quicktime for crisp/clear text

    I created a few 60 second text animations and they look perfect when viewing on my NTSC monitor but the text is fuzzy in the NTSC DV quicktimes I made. I exported them at DV resolution because I was originally told the final piece would be on DVD but it turns out they will be projected from a laptop. What are the best settings for exporting a quicktime for this purpose?
    -Jon

    When you created them, did you scale them using the "Scale" option under the Motion tab, or the "Size" option under the Control parameters? You should be using "Size".

  • Best way to export from FCE for compression?

    Hi again, folks!
    I've read/learned that, when you plan to compress your video, you should ideally export from your editing program in the final resolution (size) that you want the video to be. Apparently this is because editing programs do a better job of sizing the video than do compression programs (such as Sorenson Squeeze, which does its best work doing only compression). What I'm wondering is this: When I export to QuickTime from FCE, I have two options, namely Export as a QuickTime Movie, or Export Using QuickTime Conversion (which allows me to save as a QuickTime or other format). So, my question is, if I Export Using QuickTime Conversion, does this actually "convert" the video to some 'bastardized' version of QuickTime, or does it just reduce the size? I'm asking because I don't understand why, on the one hand, FCE refers to exporting a full size video as simply "Exporting as QuickTime" while on the other hand (eg. when I'm lowering the resolution), it's called "QuickTime Conversion" (which is lumped in with a whole bunch of other output format possibilities such as .avi, mpeg4, etc).
    I'm probably not being as clear as I'd like, but more simply put, why does FCE consider going from hi-res QuickTime to low-res QuickTime a 'conversion'?

    One suggestion I received (just tonight) from another forum was to export the video from FCE, but not as a self-contained movie; this way (I'm told), the video is not being compressed or otherwise altered, and hence will give me the best results when I compress
    The information you received on the other forum was half right and half wrong. The difference between a self-contained movie and a movie that isn't (known as a 'reference' movie) is NOT the quality; it's that the self-contained movie is an exact copy of what's in your Sequence while the reference movie only refers to the original media and renders ... it doesn't copy it. Since reference movies rely on the original media (and render files) for playback or when used in other applications (like Sorenson Squeeze), they will not work properly on any other system nor will they work if any of the original media or render files are moved, deleted or otherwise altered.
    The quality of the two types is identical.
    -DH

  • Best way to export from FCP for website

    I've been reading around about this and am not getting a clear idea of what to do...
    I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
    I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
    So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
    Thanks so much, anyone with ideas or experience!

    We don't know what format you are dealing with, ratio etc.
    However, some short answers for you.
    For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
    FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

  • Best way to export timeline footage to Toast 10 (blu ray)

    I have a 2hr production that has been shot on a Panasonic HMC150 AVCHD cam, L/T into FCP as Prorez LT and I would like to export this into Toast and burn a Blu Ray disc for my client. Is the best method to use Quicktime conversion to H264 or export as a Quicktime movie using current settings (prorez LT). My end destination is Toast 10.
    Any help would be great ..........

    Export current settings/self contained/video and audio/no recompression.
    Don't do QT conversion.
    Set your preferences for encoding in Toast, and use that self contained file.
    Be prepared for a long encode.

  • Best way to export flash movie for JAVA

    Here is my dilema. I get all kinds of flash movies to post to our site. I had been asking for a final output of  .swf, whenever possible. Occassionally I get some videos that have a player and I wind up with .swf and some related FLV files, which we always have problems with in our JAVA environment. We have issues locating the player files, sometimes they don't play for people with particular browsers etc.. The coders tell me that it is a problem with the "base" locations, and recommend that we get a single swf file and have the videos and players embedded into the .swf. They tell me that the browser sometimes cannot find  the supporting files, and that it forces them to post the flash files on the root directory. Any ideas what might be happening here?
    One other thing - I currently have an embedded swf file on one of our sites. It seems pretty heavy and skips - our Flash Developer did not include a loader. I sent it back to him to compress the file and include the swf. The developer is telling me that compressing the file won't do anything for me an that we should export it as an FLV file or have the FLV load into the swf. For one thing this is not a video - so I am not understanding why we would need an FLV. Am I misunderstanding something here.
    Thanks!

    Thanks again Winston. (You helped me out in the past).
    In my playing around, I was leaning toward AIC with a compressor pre-set of 1080i or p would give me decent results on export. I'm still a little confused over a number of the other options, and this seemed simplistic. (I'm still learning here as I go).
    One question on that though if you would. Am I best off leaving the FPS settings to current? I am assuming I can experiment with that if I want to keep a computer copy, but for back to tape purposes, that seems to make sense to my simple mind.
    On a side note, I was quite surprised at how good the default "large" export looks when viewed on the computer. I may keep that as my default for iTunes\Front Row.
    Thanks again.

  • What is the best way to export a video for broadcast using FCE?  H264?

    I need to get the best quality HD video for broadcast using final cut express and I need to know all info and settings please?

    Hello,
    You need to find out from the broadcaster what specs they require you to meet.  H.264 is probably not it.

  • Question: Best way to export HD footage to 'KEY' in After Effects (AVC-HD)

    So I have 15 mins of footage in premiere that i'm going to edit down to about 2 mins. This will then need to be keyed out (green screen) so I figure I need to bring it all into AE and use the KeyLight plugin. Should I export the whole project or use the  'replace with after effect composition' by 'right-clicking' on each clip?
    If i export the project (using adobe media encoder) what is a good format to export to because AVCHD is not an option.

    Should I .....use the  'replace with after effect composition' by 'right-clicking' on each clip?
    That's what I would do.
    If i export the project (using adobe media encoder) what is a good format to export to because AVCHD is not an option.
    Something lossless like:
    Lagarith Lossless Video Codec
    http://lags.leetcode.net/codec.html
    or
    Ut Video Codec Suite
    http://www.videohelp.com/tools/Ut-Video-Codec-Suite

  • What is the best way to export a DVCam proyect to DVD Studio Pro?

    I always export them as a normal quick time file but you are able to see some digital noise in some shots. What am I doing wrong?

    Why,,,oh why I ask? do we export to QT first?
    Export your sequence directly to compressor using the highest Mbps you can allow according to the length of your sequence. For example, you can use this formula: 560/minutes of video=bitrate. Let's say you've got a video that is 90 minutes in length---560/90=6.2, so you would compress using a bitrate that averages 6.2 Mbps. What is that you say? your sequence is only 20 min. long? then use the highest bitrate that most DVD players can withstand which is somewhere around 8.0 Mbps, for safety I never go higher than 7.5 Mbps. Use Dolby 2.0 for audio.
    THEN BRING IT INTO DVDSP
    Good luck

  • Which is the best way of exporting from FCE HD to DVD?

    I've been quite disappointed with the results I've been getting while burning DVD's. I've been exporting some really nice looking DV footage out of FCE HD and into Toast Titanium, where it's then burnt. Everything works well apart from the slightly pixelated result. Although I'm shooting in DV, I thought a good quality, new camera would give better results then I seem to be getting. I've exported the finished footage in Quicktime, and in Dv Stream formats, but both these seem to compress my footage. Can I export uncompressed? How do I do this?, and will Toast Titanium then be able to handle it? Many thanks.

    Exporting it uncompressed will make no difference. The material has already been compressed when it was shot. It's sounds like Toast isn't encoding the material very well. I've never heard anyone say it has a great encoder. iDVD5's is supposed to be better, and you can get better results with care using Compressor or Bit Vice.

  • InDesign / Best way to export for Web?

    Hi guys,
    I did an A2 (large size) poster and now i need to have the very same image for Web Mailing on Internet. I guess it will be a 650 pixeles by 800 px.
    Which is the best way to export this content for Internet? 
    1) I notice that if i save the InDesign file to PDF even in the lowest quality the small text keeps crisp and clear while the file is very small size. Unfortunately PDF cannot be used -i think- as embedded images into a mailing list.
    2) If i export the very same InDesign file at the highest posible resolution as JPG -a traditional Internet image standard- the text is blurred and not well defined, besides the file is quite large.
    3) Should i exported to PDF and then open in Photoshop and "Save for the Web" as JPG? Maybe Photoshop has a better exporting engine when regarding to images than InDesign...i don't know.
    How can i find a way to have well defined crisp and clear text, small size and image? I am not sure i could use PDF format here.
    Any help or ideas? that would be great
    Thanks,
    S

    Thanks for the tip!
    I am sorry i forgot to say i have an A2 and an A3 size poster version. I used the A3 poster and the 650 pixeles poster for Internet actually turn out to be quite readable. I used quite large fonts size in the original design, a bit of a Swiss or Constructivism style poster.
    Cheers

  • What the best way to export.

    I have been using FCE for two years now and smooth sailing. Two years ago I made a DVD for 1 hour 30 mins long. Its been awhile since that project. im currently making another possible up to 2 hours.
    now my question.
    Question #1. what is the best was to export the project file so i can use it for idvd? there is lots of options just want to make sure i get the right one. the DVD is for commerical sale just want it to be right.
    Question #2. Would it be possible to export a project file to a video camera using FCE?
    thank jim.

    1 - Normally the best way to export your project for iDVD is to export to *QuickTime Movie.* If iDVD is on the same computer as FCE, then you can export a QT reference movie (when you export, UNcheck the option called "Make Movie Self-Contained". Don't export to QuickTime Conversion if you plan to burn a DVD of your video.
    However, before you export your sequence, do both of the following in FCE:
    *Sequence > Render All > Both*
    *Sequence > Render Only > Mixdown*
    Then save your project
    Then export
    In iDVD you can put up to 2 hours on a single-layer DVD or up to 4 hours on a dual-layer DVD.
    2 - You can record an FCE sequence back to tape if you are using a miniDV camcorder.

  • Exporting HD Footage to SD DVD and WEB

    I am working with HDV footage and DVCPROHD footage within FCP 7. I am having trouble with the quality of my movies when I export the movies to SD DVD and to the web.
    Here's what I have tried. From FCP I export a quicktime movie then I take that into compressor. From compressor I have tried the DVD Best 90 min and the result is bad.
    I am using an mp4 setting for Vimeo and YouTube, and the quality isn't too bad, but my files are still large and it takes forever to upload.
    If someone has suggestions on the best way to encode in compressor for SD DVD and for Vimeo and Youtube, I would appreciate it.
    Cody

    You are still a bit vague. Different people have differing ideas as to what is good.
    It may be that you are expecting too much and you may already be getting the best that's available.
    Without seeing your results it is difficult to comment.
    Regarding your DVDs, if your movie is under 65 minutes long you can probably tweak the quality by modifying the existing pre-set to give a CBR (Constant Bit Rate) of 7.5Mbps and change Multi-pass to Single-pass.
    This will give you the highest possible quality in only half the encoding time. However, the improvement won't be startling but the time saving will be very welcome!
    Message was edited by: Ian R. Brown

Maybe you are looking for