Best way to handle several events that may occur simultaneosly

Hi all,
I have an application vi in which I need to take care of several user generated events like menu bar selections, mouse clicks on controls (both single & double clicks) and many more.Also, all these events can occur simultaneously.Which would be the best method or architecture to handle all these events with ease?..All suggestions are welcome.
Can I use dynamic event handling for this?..If so,how can I implement it? (I went through several documents & examples for dynamic handling but none of them explained properly in this context).

mnx wrote:
[..] several user generated events like menu bar selections, mouse clicks on controls (both single & double clicks) and many more.Also, all these events can occur simultaneously.[...]
Hm, can you enlighten us how a user will create these events simultaneously?
Or maybe i am a bad user as i always use either mouse OR keyboard to control an application, most often not both the same time (starting different "events" concurrently).
Beside of this discussion, Producer/Consumer is a very good starting point to address this kind of requirement, as already stated above.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Best way to handle an event from WaitForSingleObject

Hello LV experts,
I would like to know what's the best way to handle an event which I catch using the Win32 API (WaitForSingleObject) in Labview(7.1 or 8.20).
I know there is too many possibilities to do this, but I want to do it on the best way. that is why I would like to have ideas and tips from you.
Any and all tips appreciated

You can download the Library from this link. Inside is an example that shows how to handle windows messages/events.
http://zone.ni.com/devzone/cda/epd/p/id/4394

(workflow question) - What is the best way to handle audio in a large Premiere project?

Hey all,
This might probably be suitable for any version of Premiere, but just in case, I use CS4 (Master Collection)
I am wrestling in my brain about the best way to handle audio in my project to cut down on the time I am working on it.
This project I just finished was a 10 minute video for a customer shot on miniDV (HVX-200) cut down from 3 hours of tape.
I edited my whole project down to what looked good, and then I decided I needed to clean up all the Audio using Soundbooth, So I had to go in clip by clip, using the Edit in SoundBooth --> Render and Replace method on every clip. I couldn't find a way to batch edit any audio in Soundbooth.
For every clip, I performed similar actions---
1) both tracks of audio were recorded with 2 different microphones (2 mono tracks), so I needed only audio from 1 track - I used SB to cut and paste the good track over the other track.
2) amplified the audio
3) cleaned up the background noise with the noise filter
I am sure there has to be a better workflow option than what I just did (going clip by clip), Can someone give me some advice on how best to handle audio in a situation like this?
Should I have just rendered out new audio for the whole tape I was using, and then edit from that?
Should I have rendered out the audio after I edited the clips into one long track and performed the actions I needed on it? or something entirely different? It was a very slow, tedious process.
Thanks,
Aza

Hi, Aza.
Given that my background is audio and I'm just coming into the brave new world of visual bits and bytes, I would second Hunt's recommendation regarding exporting the entire video's audio as one wav file, working on it, and then reimporting. I do this as one of the last stages, when I know I have the editing done, with an ear towards consistency from beginning to end.
One of the benefits of this approach is that you can manage all audio in the same context. For example, if you want to normalize, compress or limit your audio, doing it a clip at a time will make it difficult for you to match levels consistently or find a compression setting that works smoothly across the board. It's likely that there will instead be subtle or obvious differences between each clip you worked on.
When all your audio is in one file you can, for instance, look at the entire wave form, see that limiting to -6 db would trim off most of the unnecessary peaks, triim it down, and then normalize it all. You may still have to do some tweaking here and there, but it gets you much farther down the road, much more easily.Same goes for reverb, EQ or other effects where you want the same feel throughout the entire video.
Hope this helps,
Chris

Best way to handle text files in OD10g

We have a requirement to store reports in text format into a database field, to be able to view the reports, and to print them if desired using Forms 10g. What is the best way to handle this?
- define the field in the database as clob or blob?
- if CLOB is the choice, what tools to use to upload CLOBs to the database (since webutil transfer is for blob only)?
- in Forms 10g, can one use the Forms data type LONG for CLOB?
- can you do Forms search on clob and blob fields?
- how can reports that are stored in fields be viewed without first downloading to the client workstation?
- in Forms 10g, what is the best way to view text files residing in local PCs: "host notepad myFile"?
Thanks much for your reply!
gk

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

SAP PI/PO 7.31 - Single Stack - Best way of handling 'TBDL' messages

Hi All,
I would like to know what is the best way of processing 'TBDL' messages that are shown in 7.31 message monitoring.
One way I know is to resend the messages but if the volume is huge (100k+), is there a strategy to reprocess them automatically by creating a Job? AFAIK, a job only picks NDLV messages for reprocessing.
Please share some information on handling such scenarios.
(PS: I've been through many links with TBDL issue but strategy wise, could not find any concrete responses. One of them suggested cancelling all using SQL command. I would like to know if there are some other ways.)
Thanks,
Abhishek

Hi Abhishek,
1. TBDL message are handled automatically by the system. Is there a specific time frame(or any setting) under which they start getting delivered automatically? Or it waits for resource/thread recovery?
- TBDL is an intermediate message status. Depending on the number of queues/threads for this adapter type, you will also have 5/10 messages in Delivering status. Something is preventing these messages from being delivered and this results in the backlog of messages in TBDL status. Only when the messages in Delivering status are processed will the threads be released and then become available for the messages which are backed up in TBDL.
2. If messages remain in TBDL for a longer time than expected(like 3-4 days), is there a way to resend them? Any job configuration that can do this?
- There is no way to resend TBDL messages. As above, this is an intermediate status. The focus should be on the messages in Delivering status and why these are not reaching their target and thus freeing up the threads for the backlog.
3. I would like to understand what factors on sender/receiver side can cause this to happen? Any supporting/clarifying documents? (1808554 is already analyzed and we are on a higher patch level)
- It is very difficult to answer this. There could be many different factors which could cause this to happen. Receiver system may not be available, network issues, bugs on SAP side etc. It really depends on the individual case. Best practice here would be to ensure any timeout settings are configured for the relevant adapter types. This can help prevent issues.
4. Changing message status at DB level is advisable or not? If yes, then setting them to NDLV and reprocessing using a job is suggested?
We do not advise to make any changes to message status at DB level. This option should only ever be used as an absolute last resort.
Ultimately the best way to get to the bottom of this is capture Java Thread dumps and create a support ticket with SAP.
Regards
Mark

Best way to handle when Production XI is in outrage/down

Hi All,
My production box is running smoothly now.If we want to go for any outrage and still we will be receiving many messages through internet from many partners.
So we are expecting how to receive the messages when production XI is in outrage. My client is thinking of putting one more instance with the replica of Production box. So that when the main production is in outrage then immediately they can switch back to this replica version and they can process the messages untill the main one get ready.
Now I am very much concern what are the implication will be if we go like this.
1. which is the best way to handle XI box to maintain when the system is outrage/down?
2. Is it a good idea of creating replica of production instance and maintaing this when the main one is in outrage?
Kindly suggest what you guys are doing for your implementations.
Thanks
Seema

>
> 1. which is the best way to handle XI box to maintain when the system is outrage/down?(An act of extreme violence or viciousness)
>
XI Box - Outrage -Should be a robotic XI Box. Now I know that you are thinking what to do when cops come and handcuff it. -- Just kidding..
Ok, here's the logic, you want to replace a piece of water pipe that gets water to your faucet. What do you do without the water leaking or disrupting the water supply... you either turn off the valve or add a temp pipe to keep the water flowing..
So check into your sys landscape for Fail safe or High Availability, may be one of those can save you money and time.
AB

Best way to handle large files in FCE HD and iDVD.

Hi everyone,
I have just finished working on a holiday movie that my octagenarian parents took. They presented me with about 100 minutes of raw footage that I have managed to edit down to 64 minutes. They have viewed the final version that I recorded back to tape for them. They now want to know if I can put it onto a DVD for them as well. Problem is the FCE HD file is 13Gb.
So here is my question.
What is the best way to handle this problem?
I have spoken to a friend of mine who is a professional editor. She said reduce the movie duration down to about 15mins because it's probably too long and boring. (rather hurtful really) Anyway that is out of the question as far as my oldies are concerned.
I have seen info on Toast 8 that mentions a "Fit to DVD" process that purports to "squash" 9Gb of movie to a 4.7Gb disk. I can't find if it will also put 13Gb onto a dual layer 8.5Gb disk.
Do I have to split the movie into two parts and make two dual layer DVD's? If so I have to ask - How come "Titanic", 3hrs+ fits on one disk??
Have I asked too many questions?

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

Best way to handle source files

Hi there,
After some pretty general advise please.
The company I work for looks after a lot of websites, and one
of the
headaches we have is the best way to handle source files. By
source files I'm
referring to Photoshop files, Flash .fla files and also other
none Adobe
files that relate to a site, not the .html, .asp, .aspx,
.css, .js etc type
files.
Now I'm NOT after a version control system, just a simple way
to store the
source files in a location that is separate from the website
but still to be
able to have a smooth workflow between the Dreamweaver site
and it's source
files.
At the moment, and I know this is unwise, we have a
subdirectory within the
site where we store the source files, and use WebDAV to
transfer both site
and source files to and from the server. But I really want to
separate the
site from source but still maintain a link between site and
source...... if
you see what I mean. I think the upshot is I would like to be
able to open a
site within Dreamweaver and instantly be able to access that
sites source
files if needed. This method needs to be shared across a
small team spread
round the UK.
I looked at the Repository Subversion version control, but
like I said I'm
not after a source control system, plus it appeared to
conflict with WebDAV
and Contribute, that some of our clients use to maintain
content on their
sites. I also looked at Version Cue which looked promising,
but can't see a
clear workflow between Dreamweaver and Version Cue which
separates site from
source. I might be missing something.... part of my brain
perhaps. :)
Would be grateful for any advice please.
Cheers,
@ndyB

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to handle scrolling on iphone?

What's the best way to handle scrolling? The ios has a specific style of scrolling, click and drag, with a sort of elastic effect at the limits. What's the best way to appraoch this? Create a script that mimics this same behavior?
In a related question, I have a list of buttons, which will scroll. I want to click the buttons, but I also want to drag the list. How best to handle this. If I have an event waiting for a click or a mouseup on the button, if I execute a drag I don't want to activate a button at the end of a drag.

To answer your first question, I use the iPhoneScroll class by Shine Draw. Its not 100% identical to the actual iPhone scroller but comes pretty damn close and works quite nicely on the iPhone4.
To achieve what you described in your second question, you would have to edit the class for this, it does not support interactive content.
Hope this helps.
Cheers

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

New iPad mini dropped LCD display broken best way to handle it?

New iPad mini dropped LCD display broken best way to handle it?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Best way to handle multiple currencies

I have a requirement that users should be able to report against an OLAP cube in a currency of their choice (from a list of about 20) and was wondering what the best way to handle this might be.
One option would be to have a currency dimension containing the list of valid currencies and then to pre-calculate measures in each of the currencies and store them in the cube. However the downside of this is that the resultant cube would be 20 times larger than a cube in a single currency, take longer to maintain etc. I could of course partition the cube by currency to improve reporting performance since users would only report in one currency at a time.
Another alternative would be to dynamically calculate the measures based on exchange rates - I guess this could either be done in the cube itself or as part of the reporting code. However since exchange rates are daily, this would obvioulsy prevent me from aggregating data up the time dimension (all measures are at the day level).
Is there any standard way of doing this and what are the pro's and con's?
Thanks,
Chris

Sorry - messed up - I should have posted this in the OLAP forum.....

Best way to handle all erros and get performance(OCI)?

Hi there,
Im using[b] Oracle Call Interface to execute batch file process. But I have got a problem.
I set ExecuteBatch with the same number of commit time, i.e: 100, 1000 or just 10, for thats ok.
((OraclePreparedStatement)globalStmt).setExecuteBatch(commit);
And I handle executeUpdate to catch all SQL Exceptions. I made some proposital files with invalid erros but when I handle "executeUpdate" it�s doesn�t get the corrent error line, and puts out another line that is corret.
((OraclePreparedStatement)globalStmt).executeUpdate();
Check in the code I concluded that its always get the same sequence of commit number like the error line. For example, I have between line 1 - 50 a line error, this line is 31, but I set the commit time for 50, its show me that line errror is 50 wherever 31. But if I put setExecuteBatch with '1' so it can handle corret lines erros, but the system performance bring down. What is the best way to handle all erros and keep the perfronace?
Sorry for my english, I am not native. Thanks all.

So by doing this, everything will transfer and look exactly the way I have it on the old machine?
That is correct, if your old machine is Intel based after using MA the new machine will look just like the old machine. Here is information from Apple on MA, I'd recommend looking it over.
My recommendation is to answer NO when setting up the new machine when it asks "Are you moving from another Mac?" The reason being let you new machine get set up and run for a couple of hours to ensure it's fine. Then launch MA and follow the prompts, it's very easy and if you use a fast connection like FW it should go smoothly.
Regards,
Roger

Best way to handle medical collections?

Hello all, My husband and I are new to the "rebuilding your credit" world. We're coming back from a foreclosure and actively trying to rebuild. I have 4 active collections for 3 creditors listed on my EQ/TU report - totally $399. I can pay them in full right now but I don't want to call the creditors to pay them if its not going to be removed from my reports properly. Some of these are old - 2011. I also have 3 collections "removed" from my TU/EQ report since March - will paying these affect what is listed on my reports?
What is the best way to handle these accounts to ensure they are removed from my reports completely?

Contact each creditor and politely request a Pay for Deletion - agreement they will delete from your reports in exchange for full payment. Get this in writing. If that doesn't work (try a few times), pay it, then try the goodwill route -- write letters requesting early deletion of the entries from your reports. Even though negative items will fall off your report in 7 years (so the 2011 collection will fall off in 2018), you will still have to report that you have unpaid debt on future mortgage applications, etc. And on a manual review, paid collections look better than unpaid ones. I would not advise not paying them at all.

Best way to handle several events that may occur simultaneosly

Similar Messages

Maybe you are looking for