BETA UEFI Releases for the A75MA-G55 [MS-7696 PCB v1.0]

I am uploading the latest BETA Release for the A75MA-G55 [MS-7696 PCB v1.0] mainboard.  
Currently, the latest version is E7696AMS.13A [=v1.3b10].
E7696AMS.120 ---> E7696AMS.13A
- Fix ps2 kb/mouse issue when WHQL test.
- Update Llano-AGESAMSI module.
- Update VBIOS to AMD_SUMO_GENERAL_100.
- Update Llano-AGESAMSI module.
--->Fixed DRAM Timing incorrect when DRAM insert DIMM3 or DIMM4.
------> a) When OC Genie Enable and insert 1600Mhz Memory, system will reduce Memory frequency to 1333Mhz, but work timing still use DDR1600. DRAM Timing mode must be set to Manual at this moment.
------> b) When OC Genie Disable, above setting have be set to Auto.
- Add CPU FAN 3/4 PIN ITEM and System FAN1 SMART FAN Support.
- Fixed select RAID mode and SATA decive plug on SATA1 or SATA2, system will hang CP#B2 issue.
- Fixed AMD USB3 yellow mark issue in WHQL test.
- Patch System FAN1 SMART Fan Support.
- Fixed CPU/System1 SMART Fan cannot work on first setting.
- Patch two Memory fail issue.
---->    G.Skill F3-1066CL7T-3GBPK
----> G.Skill F3-1066CL7T-6GBPK
- Patch TL-584 and RST.
- Fixed when Enabled TPM support, system will hang CP#4F 40 Sec issue.
- Update TMP patch.
- Update Llano-AGESAMSI module.
- Update SB module to 4.6.4.1_AMD_SB900_017.
- Update AHCI module to 4.6.3_AhciSrc_017.
- Update CSM function.
- Update PEI Ram Boot module to 4.6.3_PEIRamBoot_10.
- Update smiflash module to 4.6.3.6_SMIFLASH_19.
- Update shell module to 4.6.3_SHELL_20100528_01.
- Update fixedbootorder module.
- Update post time tune module to 4.6.4.0_PTT_06.
- Update to 4.6.3.7_AgesaV5_039.Modified AGESAMSI setup menu for OCICC.
- Show cpu ratio in cpuz module.
- Add ukey function.
- Add VGA display rule.
- Adjust Initiate Graphic Adapter default to PEG.
- Fix some time will hang 0Dh by fixbootorder function.
- Fix plug PCI/PCIE lan card can't boot issue when the "Lan Option ROM" item set disabled.
- Fix mflash boot issue.
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
- Fix memory-z part string issue for some memory.
- Enable C'n'Q function as default and C1E item.
- Add clear cmos function.
- Adjust VGA display rule.
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
- Fix bev device cannot boot.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

E7696AMS.146 ---> E7696AMS.140
- Add UEFI_Driver module for doing raid and installing UEFI OS.
E7696AMS.140 ---> E7696AMS.150
- Add Agesa MSI Source safe version 4.6.3.7_Llano-AGESAMSI_040-4.   
- Modified AGESAMSI Adjust Ratio function incorrect.  
- Support CMOS bad flag in AGESA Platform Configuration.
E7696AMS.150 ---> E7696AMS.162
- Fix USB keyboard and mouse would useless after using m-flash boot function.
- Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
E7696AMS.162 ---> E7696AMS.163
- Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
- Fix windows boot order will be disordered after clear coms or load default.
Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

Similar Messages

  • BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]

    Where you move the "BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]" was in the link https://forum-en.msi.com/index.php?topic=151619.0?
    That it´s ended?
    Tank you
    José Crispim
    Portugal

    >>Beta BIOSes<<

  • BETA UEFI Releases for MSI 990FXA-GD80 [MS-7640 PCB 2.2] [E7640AMS.Dxx versions]

    E7640AMS.D43
    D30 ==> D43
    1.Add 220W CPU Support.
    1.Remove OVT function to fix CPU core temperature sometimes error under OS.
    1.Update Agesa_Orochi_RevC to 4.6.4.1_Agesa_Orochi_049.
    2.Update Orochi-AGESAMSI to 4.6.4.1_OR_049_AGESAMSI_m105.
    3.Update MsiOc-Orochi to MsiOc_Orochi_m110.
    Please note that flashing this release occurs entirely at your own risk!

    >>Beta BIOSes<<

  • BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

    The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
    Changelog:
    A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
    - Add new bom
    - Fix the raid function fail.
    - Fixed CPU Frequency display error in CPU Specifications.
    - Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
    - Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
    - Fixed AM3+ CPU ratio error under CPU-Z information.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

    E7676IMS.163 --> E7676IMS.164
    * Adjust Lowest GT Ratio for different CPU.
    * Fix OC menu can't select down(when OC Genie Button Operation Enabled).
    * Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
    * Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
    E7676IMS.164 --> E7676IMS.165
    * Update Memory Initialize Reference Code to version:1.2.2.00
    * Add U-key function support USB3.0
    * Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
    * Hide the item "Super IO Chip".
    E7676IMS.165 --> E7676IMS.166
    * Remove USB3.0 Legacy Mode Support item.
    * Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
    E7676IMS.166 --> E7676IMS.160
    * Release MP BIOS.
    E7676IMS.160 --> E7676IMS.171
    * Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * Fixed UKEY compatible issue.
    E7676IMS.171 --> E7676IMS.172
    * Fixed default DRAM voltage incorrect issue when used low voltage memory.
    * In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
    * Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
    E7676IMS.172 --> E7676IMS.173
    * Fix factory INT15 tool test Hang issue.
    * Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
    * Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
    * Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
    * Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
    Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<< 
    Do Not use the BIOS/UEFI integrated M-Flash Routine.

  • I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my    i

    I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my one to transfer it over I've had no luck I've tryed restoring my new phone to the last time i backed up my old files the phone restores but always to its own backup point wen i first connected it to iTunes can anyone help me please?

    Since this is the second computer you've had this problem with, I recommend you look for answers on the iPhone forum. My thinking is it is an iPhone issue rather than a computer issue (unless it is some software incompatibility).

  • Function module WWW_ALV_CALL is not released for the Internet

    Hi
    I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
    Best Regards
    GAGAN

    hi,
    This Web based calls are not available anymore in Netweaver 2004s/7.0. 
    More information in SAP-Note: 910202
    Hope this helps
    regards
    Tobias

  • A Better Media Player for the N900???

    Just curious if anyone knows of a better media player for the N900....one that will allow the building of playlist like the N95 8GB did.  Basically just want to be able to better categorize my music and have specific playlists for different events...workouts, relaxation etc.  Thanks in advance
    Solved!
    Go to Solution.

    fardawg wrote:
    I just removed the 16GB SD card on which I had all my music stored.  I put it right back in....booted the phone up and now the phone doesn't even recognize that the card is installed.  Previously, it showed up in Settings....memory as N900 Micro.  Now it just shows a red icon indicating that no SD card is installed, when in fact it is.  What's up with this phone?  One glitch after another.  First it fails to find any contacts when creating a new SMS (I have 194 contacts in fact)....now it won't even recognize that the mini SD is installed.  I'm seriously considering returning it.
    Have you replaced the back on the phone? The phone won't find the card without the back in place.
    And you don't have to switch the phone off to remove the card, either.

  • HT1665 When will the film protectors be released for the iPhone 5?

    When will the film protectors be released for the iPhone 5?

    Read here for the differences between models:
    http://store.apple.com/us/iphone/family/iphone/compare

  • When is the new OS being released for the mac

    can any one tell me when the new OS is being released for the macbook\?
    many thanks

    In the fall (autumn)

  • Education App Highlighted in Steve Jobs' press release for the ipad 2

    Does anyone know what the education app is that was highlighted during Steve Jobs press release for the ipad 2? It showed a child in a classroom tracing a number or letter outline; and it looked like chalk when he traced it.

    I'm pretty sure it isn't. I might be wrong; but I've searched images of mathboard and it looks to be more for advanced elementary and junior high math. The images shown in the press release were of a kindergarten-age child tracing a single number...more of a learning your numbers/letters than working with math. It showed an outline of the number/letter that the child traced with their finger--as far as I have researched, there is no feature like that on mathboard (where there is a 3"-4" number or letter that the children are to trace to learn their numbers/letters).

  • I intend to buy new mac pro, is it better to wait for the new OS X mountain, or can buy it and we can update it without affecting its performance?

    I intended to buy new mac pro, is it better to wait for new OS X moutain or can buy it now and update it later as it will not affect its performance???

    khalid.mktaka76 wrote:
    I intended to buy new mac pro, is it better to wait for new OS X moutain or can buy it now and update it later as it will not affect its performance???
    If you can wait about a 3 months after 10.8 is released this summer and upon new hardware you should be in excellent shape to have not only a fastest latest machine, but a OS X version that all the bugs have been worked out. Plus the three free months of Apple hand holding while they figure out what they did wrong with the new OS version.
    If you need a new machine now you'll have to get what you need obviously, but 10.8 should run on it just fine. However know that Apple tweaks things with more currently sellling hardware first, then later gets to the previous released models.
    It's been my guestimation that your good for about two year old hardware with very recent OS X release, three years or older hardware you may want to reconsider sticking with the previous OS X version as your hardware is getting dated and likely has only a year left to go anyway (4 year average), so why bother mucking it up, slowing it down and having to buy all new/updated software and third party hardware because they won't make drivers for your new OS version?

  • Beta - BIOS Release for Z68A-GD80 (B3)

    topic unlocked.
    E7672IMS.H63 ==> E7672IMS.H66
    1.Fix the default PCI ROM Priority->Legacy ROM
    2.Modify the string 'Disable' to 'Disabled' in item 'Power Technology'.
    3.Fix hang at B2 with Intel Ethernet adapter card (I350-T2) on PCIE 1 or 4.
    4.Fix S4 resume issue.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    Quote from: Conditioned on 14-November-11, 01:01:11
    The 17.4 gives me bsods with same settings as 17.3.
    Likely MSI tweaked the auto voltages a bit at least it did for my 2600k your best bet is to start over with your over clock and avoid auto settings where possible especially voltages. Actual required voltages for your specific hardware always trancends bios changes much better
    Quote from: lionfire on 14-November-11, 01:32:58
    Conditioned, this means that your chip can't stand the voltage you gave it....Have you changed Vdroop to Low?
    I have deleted bios, reset, date started from 11/01/2011- date of bios, but on every restart sometimes cpu throttles from 4.5 to 4.2 and sometimes stays with any load applied, to 4.5.
    Changed Long, short to 255 and duration to 32000, changed overspeed protection to disabled, nothing....in every reboot, cpu throttles.
    Going back to 17.2 bios until Ivy Bridge comes out....
    Do you have ESIT, Turbo Boost, EPU2013 & Spread Spectrum disabled. What's your OC below 4.7 no need for PLL overvoltage either. Head over to your board specific thread they will get you worked out of trouble there. Fill out your system specs in this forums User CP first however so we/they know what you are working with.
    FYI I wouldn't count on Ivy Bridge being trouble free it all sounds good but it's not that much of an upgrade from Z68 unless you are running SLI/CF. The main disappointment in my book is the max of 2 Sata III 6G native Intel ports. When you consider how much these new x79 boards will cost and how they are rushing it to market with out fixing the Sata issues it adds up to being short changed and Z68 will be more mature more stable etc etc for the near term. In the end it will take a next gen socket 2011 chipset, call it X80, like GF790 was to GF780, to fix it all which will be worth the upgrade IMHO.

  • Better video cards for the new 8-core Mac Pro...?

    I don't know a ton about video cards. I did some research and the internet says that the Nvidia GeForce GTX 295 video card is the best card out right now. Will it work in the 8-core macpro? If not, or if it's not the best, what is the best video card that will work in the 8-core macpro?
    P.S.
    Does anyone know how to tell exactly whether a video card is better from another? I mean I can guess a video card at 1792MB is going to be better then one at 512MB, but I've also heard that, for example, the ATI Radeon HD 4870 512MB is better then the NVIDIA GeForce GT 120 512MB, and apple charges more for it so it probably is better, but all that tells me is the name of the cards, and that they are both at 512MB, so from that without any other information I would assume they're exactly the same just made by different companies, but there must be some other details that would explain why it's better right? Thanks in advance

    Well I found out the Quadro FX 4800 works on it, that looks pretty good.
    It's a good card, but it has a different application focus.
    What applications do you use?
    Answering that helps determine what the best card is.
    The 5800 is better though, will it work?
    Better, how?
    The spec's read better?
    How about real world performance?
    Benchmarks?
    They are very similar in shape and such.
    Shape has little to do with anything.
    The ROM is the key.
    If the card is not produced as "OS X compatible", it does not have Mac ROM and cannot be used.
    If there is a Mac edition that is similar (same GPU series, similar architecture) the ROM may be flashed to Mac ROM.
    Especially in Geforce cards, the ability to edit ROMs and even write portions of the ROM is necessary to be able to flash a card.
    Even then, no guarantees.
    Often a port on a flashed card won't work after flashing.
    Seems the 5800 has a 10 bit display port, so if the card were flashable, the display port wouldn't work.
    The ROM chip size of a card is also of concern.
    Many cards require either a new, larger ROM chip to accept the Mac ROM (soldering), or, require a hacked, "reduced" ROM to be written to allow flash.
    Invariably, there will be some feature loss with a reduced ROM, but a good hacker usually gets rid of superfluous stuff.
    Cards with more VRAM than the Mac counterpart will often times lose the extra VRAM- it won't be read by OS X.
    Then there is the EFI question, which often creates a final stumbling block for converting a card.
    There are many pioneers who flash cards.
    If a card is flashable, it has already been done.
    The Quadro 4500, 4800, and 5600 have all been worked out.
    As of yet, the 5800 hasn't been sussed out for flash (as far as I can find).
    Flashing the card is easy.
    Finding a physically compatible card and a compatible ROM are the hard parts.
    The two best retail cards for the Mac Pro are the Geforce GTX 285 and the Radeon HD 4870.

  • Does anyone know when CS6 will be released for the rest of us?

    There are a large group of people who STILL haven't got CS6 - even though we pre-ordered and prepaid for it. I'm referring to all the people who upgraded to CS5.5 to get CS6 when it came out.
    At the time of ordering Adobe said that by purchasing CS5.5 we would get CS6 'when it became available'. That was a few weeks ago now. When nothing happened we went searching and found in the FAQs that we would be able to download it 'approximately 10 days after it was released'. No reason was given for having to wait. Adobe had our money so there was no reason to not let us download it.
    Now, 14 days later, and there's still nothing from Adobe. So does anyone know what is going on at Adobe.
    Adobe do not seem to understand the whole concept of pre-paying or pre-ordering something. People pre-pay/pre-order so that they can get something as soon as it is available. It should put you at the front of the line when something is released - but Adobe  managed to completely screw that up by taking our money up front and then putting us right to the back of the line!
    And in case anyone is wondering - no, none of us wanted CS5.5. It was just a way, offered by Adobe, of upgrading to CS6.

    I found this: on a similar thread, and hope that it helps.
    <quote>
    For more details regarding the post announce upgrade please refer to:
    Complimentary CS6 upgrades | FAQ | Purchases from Adobe - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-faq-direct-purch ases.html
    Complimentary CS6 upgrades | FAQ | Purchases from resellers, Adobe - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-assurance-faq-re seller-purchases.html
    If you still have questions regarding if you qualify or not then you will want to contact our support team.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to discuss your particular circumstances for the upgrade.
    </quote>
    I know that 10 days are over. I'll try and find more current information and will keep you posted.

  • Better to go for the new iMac 24" 2.66GHz or the old iMac 24" 2.8GHz?

    The old one's at $1199 in refurb
    The new one's at about $1340 after an education discount
    I guess the new one for the extra $140 or so will hold its resale value better - but is it a better computer and worth the extra $$$s?
    Also I don't think the question's really been answered - are the processors different in the new iMacs - have they been physically updated in any way?
    Which is it better to go for? Just want to run Logic Studio 8 on it.
    Thanks.

    Well for your $140 difference you get twice the RAM, twice the hard drive space, and a better/faster graphics chip set.
    I don't know if the processors are materially different other than speed and the difference is not significant, so I wouldn't stress to much over the 2.66 vs. 2.8 speed ratings since for most processes it probably won't make a difference, but the 2.66 one will probably seems a bit faster since it has twice the RAM. Also, while super expensive right now, the RAM on the newer ones allow you to upgrade to 8gigs of RAM (once those DDR3 SODIMM RAM prices drop). Are the old models limited to 4MB max?
    For only $140 difference, I would go with the new model since the upgrades you get more than cover that. I would only consider the older refurbs if you were picking between two models with a much larger price difference.
    Patrick

Maybe you are looking for