Betreff: Helix, windows 8.1. Sleep and power off not working correctly.

I'm still havin issues booting my computer when docked or using standby when docked. I've set my computer to allways hibernate to disk as this lessens the problems for me when the computer hangs during bootup. The information is still there on the disk when you try to bootup several times.
The backdraw is that boot is really slow and it I can tell you that it's really not making a good impression when you bring the computer to a presentation and people ask about it.

Hi WooHooMe
i tried fixing it but had no luck, although it was fixed for a brief time. I think the problem is with the wireless driver. I think if you uninstall the intel pro set wireless software and then disable the network adapter(from device manager) reboot and re-enable the issue should be fixed. My problem was that afterwards i tried sharing media from my desktop and the problem resurfaced.. So it was a short win.
other things i tried is disabling the homegroup services(from control panel-->administrative tools-->services), opening cmd with administrator rights and typing "powercfg -requests" to see if there was anything blocking sleeping.
Anyway if you want to fix the shutdown issue, just disable fast startup from power options! It will shut down correctly but sleep will still have a problem.
The other problem i have is i can't refresh windows. My usb recovery drive won't be recognised, and a win8 cd i had wouldn't help also(something about the windows drive being locked).
If you have virtual box installed you could also check this http://gurustop.net/blog/2013/09/11/windows-8-1-sleep-stand-by-hang-freeze-unable-to-wake-up-virtual...
That's what i got so far, hope it helps, till someone who knows a bit more solves the issue.

Similar Messages

Volume and power off not working

My volume switch is apparently not working. And I can't power down or off . Seems like both switches are broken. It's possible that is due to small liquid spill. Can that be fixed or is it beyond repair?

Certainly it is possible because of a liquid spill. If you get liquid into the opening of any electronic device, you could have problems. Apple will not repair the device. They would perhaps offer an out of warranty replacement, if you do not have Apple Care + Which will cover 2 incidents of accidental damage for a $49 copay.
Let the device completely dry before you try anything else and perhaps you should take it to an Apple store for evaluation.

After Sleep, and power off, Lion Crash Totaly! iMac core i5 2011

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

Make an appointment at any Apple store, see what the genius bar says/does.
You don't metion whether the car was hot or cold.

My phone fell down on the floor and shutt off not working again

my phone fell down on the floor and shutt off not working again

what i should do to know the phone has damaged,
Try the steps here for the appropriate symptoms.
http://support.apple.com/kb/TS2802
If you are unable to get the iPhone working, it's almost certainly damaged. Take or send it to Apple for a definite diagnosis.
how much fees for replacement ??
If you have AppleCare+ coverage, the cost will low; in the US it's $49. If you do not have AppleCare+ on your iPhone, see the Service Pricing section here:
http://www.apple.com/support/iphone/service/faq/
Regards.

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Actions and Advanced Actions not working correctly. - Captivate 8

In our project, we have it set so that after every section the student is asked three quiz questions (they are set on the default quiz slides.) On success, the person jumps to the next question slide. On failure, the person goes to next slide which has two buttons - one that allows them to simply move forward to the next quiz question and one that allows them to go back and review. The "Go back and Review" button takes the person back to the specific content slide that contains the answer to the question they are being asked. This button is set to advanced actions "Jump to Slide ..." and "Show Button..." - The button is a 'Return to Quiz' button to allows the person to find the answer then try the question again. I know that the buttons on the default quiz slides cannot be programmed to do a specific action, but every time we click 'Submit' it seems fine until we click 'Next' to move ahead, it then routes us back to one of the content slides (Slide 7) instead of the next slide (if wrong), or the next question slide (if right). I have looked at the Advanced Interactions Window and there is nothing linking this slide to anything. I have not had this problem with any of our other modules or sections. I have tried creating new question slides and it did not work. I deleted Slide 7 and it worked fine the first time through the preview, but then when I viewed the preview again, it started jumping back and would not even let me get to the questions. Can anyone help?

Normally the Next button on a question slide is not needed, because it has the functionality of Skipping the question. It is however needed if you want to allow Review.
Another explanation is that you did change the normal work flow for a question slide, where a two-step process for submitting will take automatically the user to the next slide.
Question Question Slides in Captivate - Captivate blog
What did you do to need the Next button? If the user submits:
Feedback appears with the indication to press Y or to click on the slide, happens at the pausing point of the Question slide (default is 1.5secs)
When user presses Y or clicks, the actions Success/Last Attempt are executed if all attempts are exhausted, and you have only 1 attempt on Question level: the actions are by default Continue, but you can change it to 'Go to Next Slide' to shorten the waiting time (or drag the pausing point closer to the end of the slide).
What did you change?

Windows 8 - SC6 started doing weird things, not working correctly

Windows 8 and CS6 - Liquifying tool not working and and actions not working correctly, back ground screen flickers and changes color and does weird things. I have done a complete D&R and it does the same thing. Someone with the same problem suggested a D&R and deactivate, then reinstall and reactivate, could this possibly work? if so, how would you do that? Thanks

Yes, one I can think of. Get the make and model of your video card and head over to the card manufacturer's website.
Check for and install the latest drivers for your card.
Also see if changing the settings of your GPU helps. Uncheck everything (OpenCL Anti-alias 30 bit displays) and start at Basic. then work your way up to Normal and Advanced.

Copy and paste buffers not working correctly in iOS 8.1m

Both iPads2's in my family arsenal are exhibiting what I believe to be a bug in the iOS8.1 (perhaps corrected by 8.1.1?), in the cut/copy & paste buffer stack.
When invoking the operation to copy and paste data from one application to another, the paste action consistently selects the previous (e.g., stack level 2 rather than 1 or Top) data as what is to be pasted.
In other words, if you have used the copy and paste routine twice, the second pasting will supply one with the paste data from the first operation, rather than the desired data from the second copy and paste operation.
Copy and paste appears to work correctly from within a single application, but consistently fails when copying data from one application to another.
Does anyone know of a work-around for this bug? Is it a bug that others have identified? Is there a new selection filter menu option for copy and paste operations, and what method is used to invoke the menu?
I hope this is addressed soon, as I use Cut/Copy & Paste operations extensively (I've already had Carpal Tunnel Release surgery once and don't relish a repeat performance, no matter how successful the first was in correcting the damage).
Any clues as to what's going on here?
thanks in advance,
labernache

All you can do is simply see if iOS 8.1.1 helps you with this. With some people it has, and others it has not. I would also recommend doing a clean install of your system, too.
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

IPod touch 5th gen. Home button stuck and power button not working! Please help!

I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Back camera and power buton not working

hello dear ,
i have problem in my i phone 4,s camera and power buton . how can i replace it

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If this does not resolve the issues, take the device to Apple for evaluation and possible replacement.

Magnetic lasso and auto sharpen not working correctly

anyone having this problem with PSE 3.0

Which operating system are you using?
What is not working with the Magnetic Lasso Tool and Auto Sharpen?
Have you tried resetting the photoshop elements 3 preferences?
To reset the preferences:
Press and hold the Shift+Alt+Ctrl (windows) or Shift+Option+Command (mac) keys just after starting the launch of the pse 3 editor.
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop elements settings file
Press Yes to reset the preferences.

7D auto power off not working

My Canon EOS 7D is not turning itself off even though I have auto power off set for one minute. I think this problem began after I added a battery grip to the camera. Has anyone else had this problem?
gc

Is it a Canon battery grip, or a third party? I ask because I've heard of some strange things occuring when using non-OEM battery grips.
If it's a Canon battery grip, I'd try "rebooting" the camera to see if that clears the problem. Do you know how to do that? If not, it's pretty easy. Just remove all the batteries (including the date/time battery), turn the camera on and press the shutter release button once. It won't fire, but this will drain all remaining power from the system and force the camera to reboot. Put the batteries back in and check to see if the date/time needs to be reset... if so, you got a good reboot. (You might have to reset some of your other settings, too.)
Hopefully that helps. Otherwise, I'm at a loss.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

My phone is so slow won't download any apps and data is not working correctly

I have the moto e with straight talk

Hi
This is not a Firefox thing, but there are some general housekeeping activities you can do to make your telephone run much easier.
First of all, uninstall any apps and widgets you do not need. It is amazing how they can clutter up your phone! In the app drawer, long press on an app or widget and drag it to the uninstall option at the top of the screen.
So you have a sizeable SD card in your phone? If so, in Settings app , scroll down to Storage and tap "Move media". As it says on the menu, this will move your media files to your memory card, thus freeing up space on your phone.
Before you leave Storage, scroll up a little and tap on "Cached Data" and selected to clear the cached data.
In Settings>Apps, scroll across to "On SD Card" and tick a few boxes to move some of your apps to your memory card. (Note: With some apps, this may mean that any accompanying widgets will not work, this is a bug with Android).
Once finished, turn off your phone and turn it back on again and you should find your phone has quite a bit more space and is running a bit quicker.

Betreff: Helix, windows 8.1. Sleep and power off not working correctly.

Similar Messages

Maybe you are looking for