BEx Analyzer buttons withing planning don't work

Hello,
I tried to create a little planning application with BEx Analyzer. For this I tried different ways (my last try using: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954) but my problem is that the created buttons don't work.
If I enter a value into the key figure field and press "refresh data" or "save data" in both cases the value is set back to 0 and my entered value doesn't appear anywhere.
I checked the input-ready query by using the Query Designer. Both key figures can be changed by user entry or planning function. 
Are there any other things I have to check or change?
Thanks for your help!
Bettina

Hi D,
but if it would be locked it wouldn't be possible to enter a value - would it? I can add a value into the field but afterwards when using the button it disappears and becomes 0 again.
Here's a more detailed description:
I created a input-ready query on a aggregation level which contains sales man number, calender year/month, customer number and planned turnover.
I opened this query with the BEx Analyzer and executed the steps described in the PDF for which I added the link before in my first post in this thread. I implemented this HowTo until the popup messages.
I did some planning tries before on the planning wizard in the portal . There it was possible to add values (my test data I also created with the planning wizard but without adding a turnover value) and to save them.
There's no other planning function implemented yet. For the first step I just want to have the possibility to enter turnover values manually by using the workbook with the input-ready query. Nothing more.
Bettina

Similar Messages

  • How do I get sounds back? I don't know when an email arrives and my apps with songs don't work

    How do I get my sounds back? My apps with songs don't work and I don't know when a message or email arrives.
    Thanks

    Is it on mute? There is a switch on the side which may be mute or rotation lock. If it locks the rotation, double tap the home button and swipe your finger to the right. You should see volume, brightness, etc... On the far left is a button to mute or lock rotation. Make sure it is not on. If you still can't hear anything, go to settings> general> sounds> ringer and alerts and slide the dot to the right.
    Hope this helps!
    Caleb.

  • Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

  • Hi, I have a problem wih Photoshop. I am trying to press the buttons but they don't work at all. Also the program are not closed. How can i fix this? FYI, Illustrater is working normally.

    Hi, I have a problem wih Photoshop. I am trying to press the buttons but they don't work at all. Also the program are not closed. How can i fix this? FYI, Illustrater is working normally.

    You have not provided any useful technical information like system specs, error messages or whatever. We don't even know your exact product version.
    Mylenium

  • N86 media buttons and volume don't work with music

    I used my N86 on a trip last week as my music player, and used the nokia remote attachment which I used to play/pause, skip, repeat and adjust volume with no problems.  Just today I used my phone again, this time without the remote, or headphones, and now the media buttons on the end of the phone (when slid oposite the keypad) don't work, and the sound volume won't adjust with the volume key.  I even tried with the remote and that didn't work either.  The volume works fine with phone calls.  Any ideas on what caused this?
    PS I just updated to 20.115 and this did not correct the problem.  
    Bruce
    Message Edited by Erhard on 18-Nov-2009 02:43 PM
    Solved!
    Go to Solution.

    Sigh.. sorry to hear that. What is it with these phones that you have to format them all the time? (a rhetoric question, knowledgeable presons needn't answer )
    (Trivia: search results for 'hard reset': 6738, search results for 'format': 16063, search results for 'factory reset': 4329)
    You'll probably soon have that same problem again - my all means I don't hope you will, but I'm just guessing
    kvirtanen.deviantart.com

  • Templates with Flash don't work

    Hello,
    I have several pages with templates, but with the new Flash
    player, the swf that are included in the templates don't work, they
    do'nt appear in the webpage.
    Any help please!!

    It's IE-only behaviour as a result of changes Microsoft made
    last
    year to their browser, regarding how Active Content (Flash,
    Quicktime etc)
    is handled, after losing a high profile court case.
    http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
    Background:
    http://en.wikipedia.org/wiki/Eolas
    See also
    http://www.adobe.com/devnet/activecontent/
    If you're running Dreamweaver 8.0.2, the fix is already built
    into DW's
    interface.
    If not, try
    http://blog.deconcept.com/swfobject/
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "marialmar" <[email protected]> wrote in
    message
    news:epltgd$qcm$[email protected]..
    > Hello,
    >
    > I have several pages with templates, but with the new
    Flash player, the
    > swf that are included in the templates don't work, they
    do'nt appear in
    > the webpage.
    > Any help please!!

  • Creative Live! Cam (VF0400) with Skype (don't work)

    Hi Guys,
    This is getting pretty desperate... as this is actually my 3rd unusable webcam for my iBook (OS X 10.4.11):(
    I checked the macam website and the list said this webcam works but I can't seem to get it to work with Skype. It works with the Macam app but Skype don't recognise it. Anyone with prior experience please help because I can't seem to find any info on the Skype's help dbase.
    Any help is appreciated!

    Hello Moses,
    I once had the same problem as you. Did you do everything the readme file said? Where I'm going to: did you copy the macam.component file to the Quicktime library folder? If not copy it to the /Library/Quicktime/ folder. It should work just fine.
    Best regards

  • Buttons with page actions not working

    Hi,
    I have a folio with buttons that have actions such as "Go to Page", "Go to First Page" and "Go to Last Page".
    I could export this folio with Folio Builder to the server and I could view it in my tablet with no problems.
    However, today (August 30th) I exported the folio again and it's not working. All other overlays are working fine, but buttons with page actions just show their Click appearance and go back to normal.
    My friend also teels me of this problem.
    What happened?
    My Content Viewer in my iPad is updated and I have made the last Folio Builder upgrade.
    Sincerely,
    Jean

    There was a bug in which these previously supported button actions (Go to Page and Go to First/Last Page) no longer worked, but I thought that bug had been fixed. Let me check on that. In the meantime, the workaround is to use the "navto://" format to jump to a different page within the same document. Use the "navto://articlename#n" format. The first page is 0, so #1 jumps to page 2. For details, go here:
    http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html#WS67cb9e293e2f1f606f59889512d69320e0d-8000

  • My iphone volume button and ringer don´t work

    For some reason, suddenly, my ringer doesn´t work when I get incomng calls. Also, the volume buttons don´t work. For that matter, any button on the permiter of the phone works. All other functions of the phone work well. It seems to be a software problem, rather than a hardware one. Please help! Thanks, Jorge

    then i would restore the phone as new.

  • Since last upgrade (tablet under Android), websites with frames don't work.

    All apps are up to date. Since last Firefox upgrade, web sites with frames no longer work properly : frames are outside of screen at bottom. Chrome and other browsers work fine... but I prefer Firefox.

    I view this page from home web page ([http://www.ville-fondettes.fr/ http://www.ville-fondettes.fr/] ), staying in Firefox app.
    This web site isn't very well designed but was working well with previous version of Firefox.
    I found other web sites but a private account is needed. I try to find other examples with the same issue.

  • TS2634 My iphone headphones with microphone don't work.  Any suggestions?

    My iphone headphones with microphone have stopped working, and they are under warranty.  I am having difficulty getting an answer about what to do from Apple - just got off the phone with them, and they emailed me an article that was of no help at all.  Any suggestions as to how I can resolve  this issue would be greatly appreciated.

    All, I have this same problem and has just solved it on my iPhone.
    I read up on the problem at att.com/esupport and arrived at the link below:
    https://www.att.com/esupport/article.jsp?sid=KB413495#fbid=ahhj00ALH45
    "If your email address is linked to your AT&T Access ID, changing your AT&T Access ID password automatically changes your email password to the same password. 
    If you use your email address as your AT&T Access ID, changing your email password automatically changes your AT&T Access ID password to the same password."
    I have a ATT Uverse (for my internet access) acct and could not log on so I requested for password reset. They sent me temp password and I had to change my password to my Uverse acct. I use my att.net email as the log on for my Uverse acct. Per att instructions above, my Uverse acct is linked to my att.net email, so now my att.net email pw has been changed to the pw for my Uverse acct.
    Accordingly, go into your iPhone Settings, Mail, Contacts, Calendars, choose your Att.net mail acct and change your password.  In my case I changed it to the new pw I had set up for my Uverse acct and it works.
    Before doing this, I had also added new servers as shown below. The way I see it because your iPhone will try in succession to log on to each server from top to bottom of the list, it's best to add all the mail servers.
    smtp.mail.yahoo.com
    smtp.mail.att.net
    outbound.att.net
    Please note that I did not have to add "imap.mail.att.net" and my Att.net mail on my iPhone still works.
    Hope this helps.

  • Button inside MovieClip don't work...?!

    Hello,
    I\m traying to create AIR for Android app & I have 2 MovieClips in the main timeline the first in frame 35 and the second in frame 99 with the name of quary_mc. Inside the second movieclip there is a button with the name of sID_btn. When i addEventListener in frame 1 of the  main timeline it display:
    Error #1009: Cannot access a property or method of null object reference
    This is the code:
    quary_mc.sID_btn.addEventListener(MouseEvent.CLICK, displayData);
    function displayData(evt:MouseEvent):void
              trace("Hello");
    Regards,

    You will be unable to add the event listener to the button until frame 99 when it actually exists.
    Alternatively, you can just add the button on frame 1 at an alpha of 0 and then set it to 1 at frame 99. However, it will still get mouse input so you will need to set quary_mc.visible = false on frame 1 and quary_mc.visible = true on frame 99 to solve that issue.

  • HELP- Buttons on 20" don't work with MacBook

    For the past two years I've been using my 20" Apple Cinema Display (the one with the white edges, not the newest version) with my 12" PowerBook by connecting it through Apple's ADC to DVI adapter and plugging it into the Mini-DVI slot on my PowerBook. It worked great and I especially liked how the power button on the display would turn the computer on without the need to open the lid of the PowerBook.
    I just bought a Black MacBook Pro, used the Migration assistant to transfer over my User folder. All works fine except the buttons on the display no longer does anything. I'll push it and it will glow but it doesn't seem any signal is sent to the MacBook. The display works fine when plugged in but neither the power button or the brightness button works anymore with the new MacBook.
    Very frustrating...any ideas? Could this be a limitation of the new integrated graphics card? But what would that have to do with powering on the computer?
    My MacBook currently only has 512MB RAM. The 2GB upgrade chip is on the way, but I'm not sure this would make any difference.

    Never got this to work, looks like it's a hardware limitation of the converter.

  • After translation "buttoned" process with procedurecall don't work anymore

    Hi all,
    I have a application with a procedure called from a buttonclick which works fine before the translation.(en-us->nl) . After translation the application seems to work fine with the translated texts, except this buttonclick with procedure call.
    When i delete the translation mapping all works fine again.
    What's happening?
    greetz,
    Mark

    Hi Scott,
    Excuse me for not giving you the exact answers.
    "My question again is: did the process associated with this button in the translated application not fire when you used this button?"
    -- the process did not fire --
    "Was that other button an "item button" or a "region position" button?"
    -- It was a region position button --
    "Why do you mention the conditions on the process? Are you just explaining that as part of the experiment ... "
    -- yes, i didn't know of some of the conditions are involved with the disfunctionality of the button --
    "If the other button is an item button and the original problem button is an item button, is it the case that one would fire the process but the other would not?"
    -- as you read, that was not the case --
    "A button in a region position caused this reaction." "I have no idea what you mean."
    -- While building some new functionality in the form, i've noticed that on a certain moment the procedure/process (without the conditions, as described before) fires after a click on another region position button. --
    "So what is your conclusion? That item buttons in translated applications won't allow associated processes to fire? That may be the case (and it would be a bug we would fix) but I want to know if this is your conclusion or if there is some uncertainty."
    -- I'm new with translating an application and dissapearing functionality ;-)
    Likewise functionality is soon needed in other parts of the application. If you wish i'll keep you informed.
    Scott, thanks for your patience! Your first question about the kind of button did it for me.
    Mark

  • My down and up arrow buttons for scrolling don't work except on the firefox help page, it worked fine with chrome?

    I had google chrome before I switched to firefox due to the obsessive popups on chrome. All of a sudden the up and down keys don't scroll up and down on web pages, the only one they work on is the firefox help page. Any thoughts?

    In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
    *Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
    Thanks in advance for your help!

Maybe you are looking for