Bex error- CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02

Hi gurus,
I have been getting strange error after i enter selection parameter in query & execute -
ERROR message Abort system error in program-CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02
the query was changed related to some hierarchies/account changes related changes but it works fine in development box and gives an issue in pre prod system after transporting.
We did tried to regenerate report in RSRT but no luck...also retransported it again ..And when we try to run report in RSRT - after entering selection it open ABAP debugger screen.
Can you advice what can be issue as some other reports based on same multicube runs fine without any issues.
Hence please advice on this.
thanks
Nilesh

Hi Nilesh,
Some basic steps you can follow are as below.
1. Use Generate Report option from RSRT tcode. This will either resolve the issue or give you a better description of the error.
2. Test all the included objects in RSRV. This will let you know if there is any issue with the inforproviders or the data.
3. Check if all the master data is fine.
4. Is the report giving problem only to your ID or your system? try checking on other systems and ask you collegues to try with their ID.
5. Check the patch level or any notes that are applied to your Dev system that are not available for your other system.
6. Retransport all the objects in the Query. (structures of the multiproviders and their respective Cubes) as this is pre prod system I guess you can drop data and reload from underlying DSO/data providers.
7. check if there were any warnings displayed when you transported the Query or any other object that is involved in the query.
8. Check if you have any customer exit code in your query. any code that needs to be executed before selection screen is displayed (as you say the error comes before displaying the selection screen). Check if CMOD code was moved to pre-prod.
Please let me know if any of this worked in your case.
Hope this helps.
-Swati.

Similar Messages

  • System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)

    Guys,
    When I am executing Bex Query I am getting following error -
    System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)
    Error when generating dataprovider
    I have tried executing through RSRT and its going into ABAP Debugger mode directly - I couldn't find any SAP related notes for this issue.  Please share your thoughts.
    Thanks,
    KK

    Hi,
    Check whether there is any enough database table space in your system. looks odd for checking database table space we faced similiar issue when running the reports in development system. Once the table space added they got fixed automatically.
    Thanks,
    Arun.

  • System error: CL_RSR_RRK0_MULTIPROV_BUFH and form _GET_provbit-02 .

    Hi
    I'm getting the following error while executing a report.
    System error: CL_RSR_RRK0_MULTIPROV_BUFH and form GETprovbit-02 .
    Experts please suggest a possible solution .
    Thanks

    check out note :
    1275269 Termination:CL_RSR_RRK0_MULTIPROV_BUFH form GETPROVBIT-01-
    Edited by: Arun Varadarajan on Feb 27, 2009 5:36 PM

  • Error CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE

    Hi Experts,
    Iam working on 3.1 system, When i tried to execute a Query. I got the following error.
    <b>CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE</b>
    should i apply any SAP notes for this?
    How to correct this? any ideas.
    Thanks
    SP

    Apply OSS Notes: 885886 and 858458

  • BEx error (CL_RSR_REQUEST and GET_KID)

    Hello Experts,
    SAP GUI 710.
    While working with work books and changing properties of drilled down characteristics, I am getting following error :
    Message:
    An error occurred while communicating with BI Server.
    As a result of this error, the system has been disconnected form BI server.
    Program error in class SAPMSSY1 method UNCAUGTH_EXCEPTION
    System error in program CL_RSR_REQUEST and form GET_KID.
    Please help.
    Thanks,
    Lisa

    Hi Lisa,
    Did you guys recently upgraded from 3.5 to 7.0?
    Is this workbook created in 3.5?
    I would suggest saving this workbook again with a different name and execute. It should solve your problem.
    Let me know.
    Thanks
    Majeed

  • Help! When users save web forms and come back to submit they get an error message and form is lost

    I have a feb form that has a 28 save limit.  When users save the form and return to submitt them they get a error message that says the form has expired or has been submitted.  The form is open and it was not submitted.  Any thoughts.
    Form deadline is tomorrow and people are getting angry when I tell them to recreate the form.

    Hi;
    Can you forward me any of the emails from your users with their saved link that is not working and we can look into it?
    Send to [email protected]
    Thanks,
    Josh

  • BEX error (HP CP1025nw)

    Hi, The printer icon in the system tray HP1025nw BEX error message and it does not work. (The system I use windows 7-32-bit.)
    Can you help?

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01

    Hello,
    I am getting the error CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01 when I am trying to execute a query.  I went into RSRT and executed the query with no issues but when I go back to Analyzer it gives me the error. 
    I have found 2 notes 1084816 and 1093422 that may be the culprit but I was wondering if anyone has this issue as well?  And why would RSRT show fine and Analyzer still have the issue?
    Thanks,
    Cherie

    Hi,
    I hope you have changed the read Mode of the query from 'X' to 'A".
    Also you need to delete the Cache once the above step is done.
    The above error stopped bouncing for us once we deleted the cache.
    Rgds
    Shyam

  • BEX Error: Abort system error in program CL_RSR_GRID and form FILL_AXIS_SET

    Hello together,
    when we try to change the display setting of a charactrestic in BEx, for example from "display as key" to "display as key and text" we get the following error message:
    "Abort system error in program CL_RSR_GRID and form FILL_AXIS_SETXX_LINE:TXT_N_M"
    and BEx looses server connection.
    Does anybody know what the problem is and how to solve it?
    Thank you very much
    Johannes

    Hi Johannes,
    Thanks for the immediate reply.
    I receive the following error when I tried to find the note.
    "The requested SAP Note is either in reworking or is released internally only"
    Regards,
    Sriram

  • BEx Query : System error in program CL_RSR_LFMM and form GET_CHANM-01

    Hi Guru's,
    I have a query built over an Infoset (with 3 ODS's and 2 master data Objects)and when I am trying to run the query by selecting Currency Conversion in the Amount key figures I am getting BRAIN 299 System error in program CL_RSR_LFMM and form GET_CHANM-01 Error. If I run without Currency Conversion setting It runs ok.
    Any Advice will be appreciated

    Solved on my own

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • ASystem error in program SAPLRRS2 and form SELECT_OPTION-01-

    Hi
    I am executing BEX query and getting following error .
    ASystem error in program SAPLRRS2 and form SELECT_OPTION-01-
    How to resolve this ?
    Thanks .,

    Not enough information!
    First look at SAP NOTES (patches from SAP).

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

  • System error in program CL_RSR_CLIENT and form MENU_SEL_ITEM

    Hi,
    After a system copy (BWP to BWT) we encounter a problem with reports containing documents the BWT environment.
    At first I thought it was a problem with the Java stack, but now I am not so sure anymore.
    When running a report in RSRT (for example in BEx mode), we see the report details.
    When we use the menu on the InfoObject  which is containing the documents and than choose: goto - display documents we receive the error: "system error in program CL_RSR_CLIENT and form MENU_SEL_ITEM"
    If I run the report in the WEB we also see the report, but now we receive the message:
    Message: Error for query in BI system: JCO System name for alias BWP not found in portal
    Stack trace: com.sapportals.wcm.repository.ResourceException: Error for query in BI system: JCO System name for alias BWP not found in portal
    As you can see the error is pointing at the BWP instead of the BWT.
    Can anyone help me solve this problem?
    Regards,
    Jos.

    Thanks Martin
    The template installer was the solution to our problem.
    Points are awarded to you!
    Regards,
    Jos.

Maybe you are looking for

  • No .Mac Web Gallery visible in iWeb

    I published a gallery with 3 albums in it and can see them in Safari. However, when I try to use Insert/.Mac Web Gallery, there is noting available to insert. How do I make the Gallery visible to iWeb. Also the .jpg files are low quality. Is there so

  • LSMW - Vendor Master DATA - IBAN management

    Dear SAP guru's, I'm trying to integrate the IBAN in vendor master data with my LSMW (batch recording techno). unfortunately, I do not have the IBAN information in structure BLFBK BLFBK Vendor Master Record Bank Data (Batch Input Structure) DO you kn

  • How do you set an image into the background of a JPanel or JFrame?

    How do you set an image into the background of a JPanel or JFrame?

  • Compiler Error when Loading JAR File

    I am attempting to load a third party JAR file into an Oracle 8.1.6 database. Most of the packages in the JAR loaded, however one did not. It generated the following Oracle error: ORA-29545: badly formed class: sendData overrides a final method. The

  • Bootcamp 3.2, 3.1 and 3.1

    I am new to Mac, so my apologies if this is an obvious question. After using bootcamp to install Windows 7 on my Macbook Pro, I tried to upgrade using 3.2 Windows software upgrade. It says that I need 3.1 which says I need 3.0. After much searching I