System error: CL_RSR_RRK0_MULTIPROV_BUFH and form _GET_provbit-02 .

Hi
I'm getting the following error while executing a report.
System error: CL_RSR_RRK0_MULTIPROV_BUFH and form GETprovbit-02 .
Experts please suggest a possible solution .
Thanks

check out note :
1275269 Termination:CL_RSR_RRK0_MULTIPROV_BUFH form GETPROVBIT-01-
Edited by: Arun Varadarajan on Feb 27, 2009 5:36 PM

Similar Messages

System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)

Guys,
When I am executing Bex Query I am getting following error -
System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)
Error when generating dataprovider
I have tried executing through RSRT and its going into ABAP Debugger mode directly - I couldn't find any SAP related notes for this issue. Please share your thoughts.
Thanks,
KK

Hi,
Check whether there is any enough database table space in your system. looks odd for checking database table space we faced similiar issue when running the reports in development system. Once the table space added they got fixed automatically.
Thanks,
Arun.

System error message and application crash - ModName: lvrt.dll Offset: 00080a6a

I'm running into an error message which is proving particularly difficult to debug. After my built application has been running for some time, a windows system error will pop up telling me my application has done something bad and needs to be shut down (and sorry for the inconvenience). Clicking through to the "see what the error report contains" page reveals the issue as being in the lvrt.dll module at offset 0080a6a.
This unfortunately doesn't mean much to me.
On some occasions when I click "Don't Send", another error message pops up informing me there is "Not enough memory available to complete this operation".
The program will typically run between 8 and 24 hours before the error occurs, though I've had it run error-free for upwards of 48.
My program is unfortunately fairly large, and depends on communication with proprietary hardware so can't be uploaded in a functional state. In general terms, the body of the program (which is executing when the error occurs) involves RS-485 serial communication and simultaneous display of data to 7 continuously updating strip charts (producer-consumer design), along with envalope detection and RMS calculations in real time, all of which is multiplied by two parallel channels (around 1Mb/s data rate for each). The data is also buffered and stored in binary files for later review. Binary files are closed and a new one is opened for every 10 minutes of data collection (approx 50MB of data).
There are also about 40 user controls associated with each channel, and are polled periodically (a couple times a second). The crashes occur during over night tests, however, when there is no user input. Globals are used for inter-panel communication, but no global is written to in more than one location (most are read in multiple locations).
I know this is a bit of a shot in the dark here, but does the lvrt.dll error at offset 00080a6a mean anything to anyone? Are there any "typical" causes for a failure in lvrt.dll having to do with prolonged high data rate serial communications? For reference, this has occured on multiple machines, but all the machines it has occured on are identical out-of-the-box laptop models running XP 32. I'm going to try to run an overnight test tonight on the development machine and see if I get any different results (Vista 64 vs Windows XP 32).
I can't say my hopes are high with this one, and I'm gonna continue to comb over the code for any possible conflicts, but any insight would be appreciated.

Claire,
Next time the error message comes up I will take a screenshot of it for you. Unfortunately that may not be until Monday, as tonight is the soonest I'll be able to run another long-term test. The time between failures is the most frustrating part to debug!
There are no errors on compiling or building the application in LabVIEW. My testing has been done mostly on the distribution laptops in application form, with no LabVIEW dev tools installed, Windows XP 32 bit.
The overnight test I attempted on the development machine (within the LabVIEW environment) welcomed me the next morning with a rebooted machine, and so I wasn't able to see an error message (if there was one). Vista 64 on the development machine. Reviewing the data files, I got about 9 hours worth before the crash.
Given the time between failures and the large volume of data I'm passing around, this seems like memory leak type behavior. I'm a bit confused by the fact that it seems to fail in lvrt.dll every time, though. I'm don't know what that indicates, if anything.

Bex error- CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02

Hi gurus,
I have been getting strange error after i enter selection parameter in query & execute -
ERROR message Abort system error in program-CL_RSR_RRKO_SELECTION and form COLLECT_CHAFIX_02
the query was changed related to some hierarchies/account changes related changes but it works fine in development box and gives an issue in pre prod system after transporting.
We did tried to regenerate report in RSRT but no luck...also retransported it again ..And when we try to run report in RSRT - after entering selection it open ABAP debugger screen.
Can you advice what can be issue as some other reports based on same multicube runs fine without any issues.
Hence please advice on this.
thanks
Nilesh

Hi Nilesh,
Some basic steps you can follow are as below.
1. Use Generate Report option from RSRT tcode. This will either resolve the issue or give you a better description of the error.
2. Test all the included objects in RSRV. This will let you know if there is any issue with the inforproviders or the data.
3. Check if all the master data is fine.
4. Is the report giving problem only to your ID or your system? try checking on other systems and ask you collegues to try with their ID.
5. Check the patch level or any notes that are applied to your Dev system that are not available for your other system.
6. Retransport all the objects in the Query. (structures of the multiproviders and their respective Cubes) as this is pre prod system I guess you can drop data and reload from underlying DSO/data providers.
7. check if there were any warnings displayed when you transported the Query or any other object that is involved in the query.
8. Check if you have any customer exit code in your query. any code that needs to be executed before selection screen is displayed (as you say the error comes before displaying the selection screen). Check if CMOD code was moved to pre-prod.
Please let me know if any of this worked in your case.
Hope this helps.
-Swati.

Error CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE

Hi Experts,
Iam working on 3.1 system, When i tried to execute a Query. I got the following error.
CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE
should i apply any SAP notes for this?
How to correct this? any ideas.
Thanks
SP

Apply OSS Notes: 885886 and 858458

[OAM] Want to use custom System Error page and OOTB logout page simultaneously

Hi,
I have developed a custom OAM System Error screen (Error.jsp). To do that, I took oamcustompages.war from the installation directory, create Error.jsp and deploy it on oam_server1 server. After that, I run the updateCustomPages(extension="jsp", context="/oamcustompages") on wlst. This works fine.
But now, if I invoke xxxx/oam/server/logout I have the following:
<html><head><title>302 Moved Temporarily</title></head>
<body bgcolor="#FFFFFF">
This document you requested has moved temporarily.
It's now at <a href="http://lablnx246:8888/URLWeb/oamcustompages/pages/Logout.jsp">http://lablnx246:8888/URLWeb/oamcustompages/pages/Logout.jsp</a>.
</body></html>
So.. it appears that all pages ootb have been replaced by the custom war. Is there any way to only let Error.jsp active and other pages be called OOTB?
Thanks!

The updateCustomPages will change the default OOTB behaviour
If you do not want this, you can leverage the Success URL/Failure URL configuration in the Authentication policy and point it to the custom error handler

Help! When users save web forms and come back to submit they get an error message and form is lost

I have a feb form that has a 28 save limit. When users save the form and return to submitt them they get a error message that says the form has expired or has been submitted. The form is open and it was not submitted. Any thoughts.
Form deadline is tomorrow and people are getting angry when I tell them to recreate the form.

Hi;
Can you forward me any of the emails from your users with their saved link that is not working and we can look into it?
Send to [email protected]
Thanks,
Josh

Everytime I try to restore my iPhone I get half way through it then it gives me a -20 system error message and then tells me the back ip is corrupt. Can someone help?

I am trying to update my iphone and once it gets to the restoring process I get " An error occurred while restoring this iPhone (-20)". Once I hit ok I get "iTunes could not restore the iPhone " " because the backup was corrupt or not compatible with the iPhone that is being restored". But about a month ago we updated another iphone we have same model. Can someone tell me what to do or how to fix this?

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated

hi Arun,
sap oss note 858458 may relevant for you, take a look, may need support package.
Symptom
When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
Reason and Prerequisites
This is caused by a program error.
Solution
BW 3.0B
           Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

BB system error - deletes ALL information and wont turn on

Hi,
I have a BB Curve 8900, 2 months old.
Since purchasing my phone from Hong Kong and now using it in Thailand,
my phone has failed on me 3 times. A system error occurs and
all my contacts and messages are deleted. Considering it is only 2 months
old, I wouldn't have expected this to happen. I've had to go re-upload
the software twice now but since this is the 3rd time - I urgently need to
find out the problem here. A message comes up saying 'JUM Error 517'.
Please help!!!
Tina

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above is from:
http://support.apple.com/kb/TS3694

BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.

Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Reboot due to system error / Register dump from exception handler

hi,
I have a problem with Labview RT when using Reboot function.
The RT target (desktop) reboot but there is a message : Reboot due to system error. And if I reboot once again, the target become in safe mode.
Now, If I look at the log I obtain the following message see more in the log attached!
*** REGISTER DUMP FROM EXCEPTION HANDLER (code 0x80000003) ***
I don't understand why there is this message.
Anybody has an explaination?
Attachments:
Nouveau Document texte2.txt ‏6 KB

julesjay a écrit:
ok I didn't know that. I will wait for tomorrow.
NI france is not very efficient about labview Real time problems.
There is one or two experts and there aren't easily reachable.
So a lot of question I send stay with no answer.....
That why I hope someone will be able to help me.
Hi Julesjay,
After i have see your log file and the problem, i think NI FRANCE are working on your request for all problems you have in your application.
And i don't understand what you say that, because we have make test, we have send us informations for make different tests, and we are still working on your problem.
I know the problem are not resolved, but we are working for resolve it quickly.
I suggested you to contact the AE that are your service request for have more information.
Best regards,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France

Acknowledgement contains system errors

Hi,
We have a IDOC to File scenario. When we check the status in SXMB_MONI, we are getting processed successfully flag, but getting ICON "acknowledgement contains system errors". And also file is not reaching destination folder. When I check the errors in acknowledgement, I can see the error message "OUTBOUND _ BINDING_NOT_FOUND " and below that some message saying,
"No receiver agreement found for sender BS_Receiver and receiver BS_sender. But my sender is BS_sender and Receiver is BS_Receiver and I have a receiver agreement with that combination. I checked entire configuration scenario and everything is fine.
I don't know why it's taking sender as receiver and receiver as sender and that too in case of receiver agreement only. In all other places sender is shown as BS_Sender and Receiver is shown as BS_Receiver. Anybody experienced this kind of error?

hi,
Just check this guide on how to handle acknowledgements,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
also,if you want you can turn off idoc acknowledgements then you use the report: IDX_NOALE .You can just add the entries in table IDXNOALE from SE16.
IDX_NOALE should run on your R/3.
Just check following SAP Note : 777175
Regards,
Bhavesh

Share Online- System error -34

Hallo,
if I want to upload pictures to Ovi store from my Nokia N82 ( by aplication Share Online) there is a System error -34 and I can´t upload my images Only when I come home and I am on Wlan it works.
If I want to upgrade my Share online, I can´t because it is built-in unit . What can I do or how can I upgrad built-in units in my phone. For example the same thing do Maps if I want to upgread them.

Nevermind it works now you can delete this post

CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01

Hello,
I am getting the error CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01 when I am trying to execute a query. I went into RSRT and executed the query with no issues but when I go back to Analyzer it gives me the error.
I have found 2 notes 1084816 and 1093422 that may be the culprit but I was wondering if anyone has this issue as well? And why would RSRT show fine and Analyzer still have the issue?
Thanks,
Cherie

Hi,
I hope you have changed the read Mode of the query from 'X' to 'A".
Also you need to delete the Cache once the above step is done.
The above error stopped bouncing for us once we deleted the cache.
Rgds
Shyam

System error: CL_RSR_RRK0_MULTIPROV_BUFH and form _GET_provbit-02 .

Similar Messages

Maybe you are looking for