BEX - number of displayed values

Hello,
is possible to change standard setting "number of displayed values" in BEX - Selection for any characteristic. Standard setting is 100. Whan I want to see more values I always have to change it to all/100/200/500. Is possible somewhere to set as default setting for example value 500.
Thanx Tom

Hello Tom,
the value is hardcoded to prevent performance issues. If you want to overwrite it, you can do a modification:
Function module RSZ_X_VALUES_GET
 PERFORM values_get_prepare
 USING i_s_params
 i_t_attrinm[]
 i_t_selopt[]
 CHANGING l_readatr
 l_date
 l_max_rows
 l_t_attrinm[]
 l_t_selopt[]
if l_max_rows = 100. l_max_rows = 500. endif. "<<INSERT
Regards,
Marc
SAP NetWeaver RIG, US BI

Similar Messages

Number of displayed values - Filter Selection

Hello,
Does anyone know of a way to change the default '100' for "number of displayed values" in BEx Analyzer's "Select Filter" pop-up? The other choices are All, 200, and 500, which you can change while in the pop-up, but is there a way to permanently set it?
I did find I could change the checkboxes (e.g. "only values in infoprovidor") via the characteristics' BEx Analyzer tab, but I haven't found anything on "number of displayed values".
Thanks in advance,
Saskia
PS we're using BW 3.1

Hello Saskia,
Please check this thread
BEX - number of displayed values
Regards,
Praveen

IP Dropdown box - Maximum Number of Displayed Values

Dear experts.
Using dropdown box on BEx Analyzer 7.0 only shows at most 99 values on dimension filtering.
Is it possible to extend that number of values?
Thanks for your help!

Solved: If you select 0 as maximun number of displayed values you get all the values.

BEx Analyzer Drop Down Maximum Number of Dislayed Values

Is it possible to adjust the maximum of 100 (Properties of DropDown>Selection>Maximum Number of Displayed Values)? I have searched the API and i could not find that setting in there. Is there a hardcoded global setting that can be changed?
Thanks in Advance

Hi Jon,
If you are using 7.0 version. Place dropdown in workbook and click to get properties. On Selection Tab you will get maximum number of displayed values. Select the number.
Regards,
Kams

Too much displayed values in flash 2D line

I have a 2D line flash with variable number of points.
The X ans Y labels are rendered and the Y values of the points are displayed on the chart.
When the number of points increases the displayed values on the chart start to overlap.
When the number of points is too great, values overlap so much that we can't read any of them.
Is there a way to decrease the number of displayed values on the flash while retaining the same number of points?

Hi Andy,
Thanks for your quick response. If I'm correct in understanding what your saying is that with 2D Line charts that have two series in order for them to display togethor then the label must appear in both series.
I've had a bash using your sql for the 1st series and modifying the second series.
Series 1
SELECT NULL LINK,
X.THE_DATE LABEL,
Y.PROJECTED_HOURS VALUE
FROM
(SELECT END_DATE THE_DATE FROM TEST_PROJECTED
UNION
SELECT LIFING_DATE THE_DATE FROM TEST_ACTUAL
) X
LEFT OUTER JOIN TEST_PROJECTED Y ON X.THE_DATE = Y.END_DATE
ORDER BY X.THE_DATE
07/30/2009 700
08/09/2009 800
08/14/2009
08/27/2009 9000
Series 2
SELECT NULL LINK,
X.THE_DATE LABEL,
Y.ACTUAL_HOURS VALUE
FROM
(SELECT END_DATE THE_DATE FROM TEST_PROJECTED
UNION
SELECT LIFING_DATE THE_DATE FROM TEST_ACTUAL
) X
LEFT OUTER JOIN TEST_ACTUAL Y ON X.THE_DATE = Y.LIFING_DATE
ORDER BY X.THE_DATE
07/30/2009 800
08/09/2009 1000
08/14/2009 1201
08/27/2009 12000
This is a great improvement the series 2 now displays fine and all the points for series 1 are plotted correctly but it seems like the null value prevents the joining of the coordinates in this series. All the points 700,800 and 9000 are displayed correctly but the graph line only joins 700 and 800.
Any further ideas? Thanks Pete

How to Add a New Filter Value in BEx WAD to Display All Result

Hi experts,
I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
The status field can have two values: Active ("A) and Inactive ("I").
But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
Does anyone have an idea?
Regards,
Joon

Hi Vineet,
thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
Is there any possibility to realize this?
Thanks,
Joon

Maximum number of filter values in BEx web

Hi
Is it possible to change the maximum number of filter values displayed when running a query?
Example: When the user runs a query and has to put in a material number, he pushes the button which shows him the possible values for input. The number of values displayed per page is 14 and the maximum number of pages is 72. The maximum number of values is 1000. If the user tries to search, he only searches amongst the 1000 possible values. Is it possible to change the number of possible values shown to unlimited?
We use NW04s BI SP09.
Kind regards
Erik

Hi Experts
I have the same problem , the maximum number of hits si set to 200 , ant the variable contains over 300 values , it is a variable based on a time charactersitic , and the values appear in ascending order , i mean the first 01.1900 , and the last value 03.2012 . i wonder if there is a way to change the order of sort to descending order . I mean the first value 03.2012 and the last one 01.1900 . I attach the image .
Thanks for your help.

(Un-) Displaying Values of an COMPOUND InfoObjects in BEX

Hello,
I have a Mastadata InfoObject with one Attribute and
one Compound:
Masterdata - InfoObject:
IO_MASTER, with masterdata, CHAR(30)
Attribute:
IO_ATTRIBUTE, CHAR(29), ...
Compound:
IO_COMPOUND, CHAR(29), ...
...which means logical Primary Key is:
IO_MASTER, IO_COMPOUND
In BEX the Masterdata InfoObjects displays values with "/".
For Ex. as:
<IO_MASTER Value / IO_COMPOUND Values>
I want to Display only as:
<IO_MASTER Value>
How ?
Thank You
Martin Sautter

Hello,
for Your info:
Put the Compounded InfoObject IO_COMPOUND
into the rows or columns ( and mark it as undisplay)
Please compare:
Re: Exclude compound object data in report
Martin Sautter

Taking display value for calculations using structures in Bex query

Hi
I am using Bex analyzer to do a simple report with two key figures Sales and Plans from cube and two more calculated key figures Abs Deviation and % error. The report displays at category and product levels. Category is higher and one category contains multiple products.
The simple formulas for the two calculated KF are,
1. Abs Deviation = Abs (Sales Plans).
Abs Deviation is set with the property Calculate result as summation to add up Abs deviations at product level to show at Category level.
2. % Error = Abs Deviation / Plan.
The issue is with the % Error value at category level. At product level, all the values are showing correctly.
To illustrate the issue with a simple test case,
CategryProductSale-PlanAbs Dev----%Error
C1--P1--100-60---40--
67%
C1--P2---50120---70--
58%
C1 Total--150180---110--
17%
Observe that in the output the calculation for %Error at product level is correct all the way. But the summary
calculation for Error% i.e. C1 total which is showing as 17% is wrong. The correct value as per the formula should be 110/180 = 61%.
SAP, through OSS replied that it is not a bug but the default behavior of OLAP calculation. OLAP processor first calculates the formula for % Error and then shows the display value at C1 total for Abs Dev. Meaning, % Error is calculated first and next the summation for Abs dev is displayed. Abs dev 110 at C1 level is only a display value but not the value taken for % Error at C1 level. Instead OLAP calculates the Abs Dev at C1 level by Total sale Total plan = 180 150 = 30 and the % Error calculation takes this 30 value in the formula and gives % Error = 30/180 * 100 = 17% at C1 level. But 17% doesn't make any sense to the user. Further, to display value of 61% at % Error at C1, it is being advised that by defining two structures, I can force the calculation to take display value of 110 in the % Error calculation at C1 level by using the cell editor.
Has any body tried to achieve similar result as above by defining two structures and cell editor in the query? If so, can you please throw some pointers of how to define two structures in a query and how to force the % Error at category level to take the display value of 110 in the calculation? I have gone through the documentaion on structures and cell editor but the approach is not at all clear.
Thanks in advance for your suggestions.
Prasad
Unilever Asia IT department

Hi,
Have u read aabout the Formula Collision.
Take a look on this link .
http://help.sap.com/saphelp_bw32/helpdata/en/d2/02223c5f00612be10000000a11402f/frameset.htm
Read the Formula Collision, and let us know , whether your pb is solved by changing the Formula Collision of % error formula.
With rgds,
Anil Kumar Sharma .P
Kindly assign points , If it really helps you.

Is it possible to easily view the actual (not displayed) value of a cell?

Is it possible to easily view the actual value of a cell calculated by a formula, not the displayed value after it has been rounded off?
For instance, if you enter the number 1.23456789 and display it rounded to 3 decimal places, you can still see the full, actual value in the formula bar:
The problem arises when you reference that number in a formula: you can't see the underlying value (even though it's obviously known to Numbers):
Is there a way to get the formula bar (or a tooltip) to show the full, unrounded value? Changing the display to more decimal places is not very convenient, especially on big spreadsheets. Maybe it could be done via AppleScript?
A related issue arises when you try to look at the sum or average of a number: if the numbers being summed have the same number of rounded decimals, the sum displayed is rounded too. I find this very annoying: I want to see the actual value, not how my spreadsheet may be displaying it in that cell.
Although, curiously, rounding to any number of decimals as long as they are not all the same displays the full, correct underlying values:
Has anyone come up with workarounds for these issues?

I did it with an AppleScript.
Now any time I have a cell or cell range selected, I do one click (AppleScript menu > Display Value at Full Precision), and it shows me a popup alert that simply reads:
     rowname : columnname
     value
Here's the script:
tell application "Numbers"
          try
                    set selectedTables to (tables of sheets of front document whose selection range is not missing value)
                    repeat with selectedTable in selectedTables -- tables of each sheet
                              if contents of selectedTable is not {} then -- the list is not empty, it's the selected sheet
                                        set selectedCells to cells of selection range of (get item 1 of selectedTable)
                                        repeat with i in selectedCells -- each selected cell
                                                  set {selectedRow, selectedColumn, selectedVal} to {row, column, value} of i
--                                                  display alert "value of " & name of selectedRow & " : " & name of selectedColumn & " (" & address of selectedRow & ":" & address of selectedColumn & ")" message selectedVal
display alert name of selectedRow & " : " & name of selectedColumn message selectedVal
                                        end repeat
                                        return
                              end if
                    end repeat
          on error eMsg number eNum
display alert eMsg
          end try
end tell
( Props to Jacques Rioux who posted code to get me started at https://discussions.apple.com/thread/3964938 )

How can I get dataTable to display values from the java layer?

When I use the dataTAble in my JSP page it will only display values from my java layer if the facets tag has it's name set to "header". Why is this happening?
If I set it to "header" and I look at the page source it actually has created the correct number of rows but it doesn't put the values between the <td> tags? It see's the length of my list but it doesn't pick the values out of the list.
<h:dataTable var="data" value="#{NameBean.test}" border="1">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
</h:column>
<h:column>
<f:facet name="header">

<h:outputText styleClass="outputText" value="#{NameBean.test}" style="" rendered="true" escape="false"/>
</f:facet>
</h:column>
</h:dataTable>
public List gettest()
 List li = new LinkedList();
 Object Developers[] = {"M@n00j", "sdsadas"};
 for( int i = 0; i < Developers.length; i++ )
 li.add(Developers);
 return li;
Thanks in advance to anyone that can help.
-ls6v

I've been able to get it working with some of those changes along with changes in the JSP. I think it's a setting or two in the JSP that'll allow the program to run correctly.
I have a list and it's returned like what you suggested. A day or two ago I tried to move the outputtext outside of the facet tag but nothing would print, I know believe that's related to the following setting in the JSP:
rows="0" in the <h:dataTAble tag
Unfortunately the dataTAble isn't displaying the values correctly. It prints all of the values (Strings) in the list on each row and it make a new row for the number of items in the list.......... ???
Here's what it's printing to the screen (the table):
===================
== [asdasd], [sddfdfd] ==
===================
===================
== [asdasd], [sddfdfd]==
===================
what it should print:
============
== [asdasd] ==
============
============
== [sddfdfd] ==
============
My code:
public List gettest()
 List li = new ArrayList();
 li.add("asdasd");
 li.add("affffd");
 return li;
 }JSP
<h:dataTable border="1" columnClasses="list-column-left"
 headerClass="list-header"
 rowClasses="list-row-odd"
 id="table"
 rows="0"
 value="#{NameBean.test}"
 var="data">
<h:column>
<f:facet name="header">
<h:outputText value="test"/>
</f:facet>
<h:outputText value="#{NameBean.test}" style="" rendered="true" escape="false"/>
</h:column>
</h:dataTable>

Display values of a single field in a multiple rows in a table region

Hi Tech-Gurus,
I want to display values of a single field ( which is in a table region) in multiple rows and also need to restrict the values from decimal number. If i click save, then it will throw exception "Decimal not allowed".
xxxxxx
yyyyyy
Reg.No
1234
5678
7654
I need to display the values of REG.NO in different rows like,
1234
5678
7654
and also need to validate as well against Decimal values.
Please help me with the code how i will iterate ?

Hi,
I am assuming you are talking about displaying substrings from the Reg No in different rows. For this you would need to write a query which identifies the substrings and creates a separate row for each (ensure you choose values for all other columns in the table row). Kindly let me know if the understanding is incorrect.
To validate against decimal value you can use the java code by checking the difference of the number and the number on which modulus has been applied. Hope that helps.
Regards
Sumit

Display values on a chart

hi,
in excel, you can display the value of a bar in a chart right on the chart.
i've looked in cx 4.5 for the equivalent option, but did not see one.
after looking at some of the chart samples, i noticed that i did not see this
am i correct that this is not an option in cx?
thank you
tracy

HI, Tracy
In CX 4.5 Pro the option is in the following Path
--> Double Click on the Chart from the Properties Window select the Appearance tab
--> Now from the Title Button you can select or unselect the Show Legend Value
Now the problem is that you want to display the Values but it display the Numbers as if there are categorize 1 to 9 than it show the Number from 1 to 9 and color of that Category in the Chart.
But we can do a trick through you can achieve your Requirement.
Like Just right side of you Chart Place a List View or Table view and Point the display Values of that Control to the Values you are displaying in the chart.
In this way you will be able to display the Category name and amount in the right side or any where you want.
Hope this help you to solve out your problem,
Please Reply if any Issue,
Kind Regards,
Faisal

Setting the value of a textbox to be the display value of a selected item

I have two seperate regions on the same page. In the top region I have a select list with submit and in the bottom region I have a textbox. I can get the value of the textbox to be set to the RETURN value of the select list, but it is merely a number. I would like for the value of the textbox to be set to the DISPLAY value of what the user has selected from the select list. How can I accomplish this?
Thanks,
BoilerUP

Hi BoilerUP,
Cant you create an item based on a select, that returns the value you want?
select text from mytable where id = :myselectlist_id;
Regards Pete

Cannot display values in LOV when using oe_transaction_types in Web ADI Template in R12

Hi,
I use BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV to create a POPList by using the view oe_transaction_types, but there is no any data displayed in the order type column, while can use table oe_transaction_types_tl to create the POP List and display value. Does the Web ADI LOV not support the MOAC? Here is the API:
BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV(P_APPLICATION_ID     => 20009, --IN NUMBER,
                                        P_INTERFACE_CODE     => 'XXX_UPL_ORD_INTF', --IN VARCHAR2,
                                        P_INTERFACE_COL_NAME => 'P_ORDER_TYPE', --IN VARCHAR2,
                                        P_ID_COL             => 'NAME', --IN VARCHAR2,
                                        P_MEAN_COL           => 'NAME', --IN VARCHAR2,
                                        P_DESC_COL           => 'DESCRIPTION', --IN VARCHAR2,
                                        P_TABLE              => 'OE_TRANSACTION_TYPES', --IN VARCHAR2,
                                        P_ADDL_W_C           => 'TRANSACTION_TYPE_CODE = ''ORDER'' AND NVL(END_DATE_ACTIVE, SYSDATE) BETWEEN START_DATE_ACTIVE AND SYSDATE',
                                        P_WINDOW_CAPTION     => 'Order Type', --IN VARCHAR2,
                                        P_WINDOW_WIDTH       => 500, --IN NUMBER,
                                        P_WINDOW_HEIGHT      => 400, --IN NUMBER,
                                        P_TABLE_BLOCK_SIZE   => 10, --IN NUMBER,
                                        P_TABLE_SORT_ORDER   => 'NAME', --IN VARCHAR2,
                                        P_USER_ID            => -1, --IN NUMBER,
                                        P_TABLE_COLUMNS      => 'NAME,DESCRIPTION', -- IN VARCHAR2,
                                        --P_TABLE_SELECT_COLUMNS IN VARCHAR2,
                                        --P_TABLE_COLUMN_ALIAS   IN VARCHAR2,
                                        --P_TABLE_HEADERS        IN VARCHAR2,
                                        P_POPLIST_FLAG => 'Y');

Duplicate post.
How to restrict the display of Integrator in Web ADI
How to restrict the display of Integrator in Web ADI

BEX - number of displayed values

Similar Messages

Maybe you are looking for