BEx-Query results in error in SAPLRRI2 and KFB_FUELLEN_CONST

Hello,
I hope anyone has a solution for the following problem.
When applying the "Calculate with Attributes"-how-to, I got the following error message
in a BEx-Query. It is reproducable and only occurs if I have a formula A minus B
(key figure A alone and B alone work and A minus 123 also works; plus or multiply also do not work).
It occurs before the parameter call, although the parameter is only a global filter.
Unfortunaltely I had to translate the essential content of the error messages,
for I only have the German ones.
In the web I get (The proposal for characteristic ... does not fit to the filter.):
Es wurde eine Abbruchmeldung gesendet.
WARNING BRAIN (459): Die Vorschlagswerte für Merkmal ZMLST_USE stimmen mit dem Filter überein
MSGV1: ZMLST_USE
ABEND RSBOLAP (000): Programmfehler in Klasse SAPMSSY1 Methode : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION----
In the query designer I get (Systemerror in program SAPLRRI2 and form KFB_FUELLEN_CONST):
Abbruch: Systemfehler in Programm SAPLRRI2 und Form KFB_FUELLEN_CONST -01- (Langtext beachten)
Diagnose
Dieser interne Fehler ist ein gezielter Abbruch, da ein Programmzustand vorliegt, der nicht vorkommen darf.
Vorgehen
Analysieren Sie die Situation, und verständigen Sie SAP.
Wenn der Abbruch bei der Ausführung einer Query, eines Web Templates oder bei der Interaktion im Planning Modeler aufgetreten und dies reproduzierbar ist, nehmen Sie ein Trace auf (Transaktion RSTT).
Weitere Informationen zur Aufzeichnung eines Trace finden Sie in der Dokumentation zur Trace-Tool-Umgebung sowie im SAP-Hinweis 899572.
Has anyone a clue? I use SAP BW 7.0 with a version from last summer.
Best regards
Thomas
P.S. I think the following old note "UNCAUGHT_EXCEPTION and filter of items or input help" (SAP Note Number: 950992) does not apply.
P.P.S.
See also thread "Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION"
Recommended help are:
- "rebuilding the query and adding 0FISCVAR last"
- "standard variable (filter on company code). I change it with another"
- "reducing the BW OLAP Cache from 5 GB to 1 GB" (we have only 200 MB)
- "Query Properties in the Variable Sequence Tab and remove any variable that is not being used"
- At least till Spring 2008 seemed to be a problem in the SAP software, may be still be a problem.
P.P.P.S.
Found a workaround to design my query. But I still wonder why this does not work.
Error message seems not appropriate for the problem, if any.
Edited by: Thomas Köpp on Mar 10, 2009 3:36 PM

Hi Thomas,
I am experiencing exactly the same issue and after debugging my report on RSRT TCODE I get exactly the same exception error message: "KFB_FUELLEN_CONST-01-" on Program: "SAPLRRI2".
Can you share please how you corrected the issue and/or what was the workarround you performed?
Thanks in advance

Similar Messages

Exporting BEx Query results to CSV or other files.

Hi All,
We have a report designed in WAD, which uses a BEx query to display department’s information. Because of amount of data in the results it crashes when u get all the Free Characters into ROWS(Error is : Result set too large(552244 cells); data retrieval restricted by configuration (maximum =500000 cells). It is a requirement from the user to have all the free characteristics in the rows( which I can understand is not the right way to go ahead). As it is crashing when you add last characteristic(WBS Purpose) into the rows, they aren’t able to export data into spread sheet from the results. (as there are no results)
Now my question is…..is there any way we can export the results from BEX query into any format for example text or csv? If yes, can we schedule that process? Please note that this characteristics are displayed as hierarchies.
Am new to SAP BW and its been only six months since I have been in this role. Any help would be much appreciated???
I looked online and some where in the forum it was mentioned of using program RSCRM_BAPI, but looks like it needs some sort of downloads from SAP.
Is there any other way to export the BEx query results?
Cheers
Sandeep

Hello Sandeep,
You can use the Item "Context Menu" in your WAD and in the properties by default you can see the Options:
Export to Excel & Export to CSV will be there and also there are many options which you wanted to see.
It works for you!!!
With Regards,
PJ.

BEX Query Designer - Application Error

Dear experts,
I have a problem with my BEX Query Designer. Whenever I tried to save a query, I caught the following exception:
BEX Query Designer has encountered a problem and cannot proceed with the current action. We are sorry for the inconvenience.
Additional Information:
QD revision 300
Internal Error ID: E-ONGUIUNHANDLEDEXCEPTION
Error Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'
Can someone help me to solve the problem?
I am using the following version:
BI AddOn 7.X (based on 7.10), Support Package 3, Revision 520

From the log:
5:01:38 PM.31 ########## --> com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException ##########
-EXCEPTION-START- 5:01:38 PM.31: ---
Exception Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'.
Exception    at com.sap.bi.et.QueryDesigner.QDbElement.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbQuery.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.ToTables(Hashtable iTables, QDcElement iElementsToSave, QDbCopyInfo iCopyInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.Save(String iRole, String iNode)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.Save(QDbElement iElement, Boolean iOutputSuccess)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.Save(QDbElement iOriginalElement, QDbElement iSaveElement)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveQuery.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
   at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
   at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   at System.Windows.Forms.Control.WndProcException(Exception e)
   at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.Run(Form mainForm)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
-EXCEPTION-END----

Retrieving BEx Query Results Area for use in Excel formulas

Hello,
I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
****Problem:
Depending on the query parameters, the query "Results Area" is larger or smaller.
****Non-optimal solution:
One way to define the ever changing Excel range occupied by the Results Area is to create an Excel name as:
QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
****Question
What is the best way to refer to an ever-changing query Results Area in an Excel formula?
Thank you!
Louis

It is actually much easier than that.
Use a VBA statement like the following:
Set RptRng = ActiveCell.CurrentRegion
This will retrieve the data in the Results Area, no matter what the size is.
Hope this helps...
Bob

Bex query designer -- Execute Error

Hello,
when i am executing the Bex query designer -- > Execute. i am getting the following error.
Service not attainable
What has happened?
The call of the URL http: // fe-pit-ttbw.company.com:8000 / irj/servlet/prt/portal/prtroot/pcd! 3aportal_content! 2fcom.sap.pct! 2fplatform_add_ons! 2fcom.sap.ip.bi! 2fiViews! 2fcom.sap.ip.bi.bex it was broken off, because the appropriate service is not available.
Indication
The demolition appeared on the system PIT and with the fault code 404 and the reason trouble(need) found. The selected virtual Host was 0.
What can you do?
Please, choose a valid URL. If you still dispose of no user's identification, you address your system administrator.
Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:rb3pnk2_PIT_00-v:0-s:404-r:Notfound HTTP 404 - trouble(need) found your Internet SAP Communication Framework team
Edited by: Ranga123 on Aug 5, 2010 1:14 PM

hi
have u checked if web service is active to open the report in web?
use T-Code SICF
also check if portal is up or not.
also check below post:
[SICF service - error code 404;
Edited by: Gaurav on Aug 5, 2010 2:01 PM

Column chart from Bex query with 2 characteristics in rows and column

Hi,
We're trying to represent the following column chart in Dashboard Design:
Material/Month
January
February
March
Material 1
100
200
300
Material 2
400
500
600
Material 3
700
800
900
The BEX query has:
Result objects: Material, Month/year; amount
The problem is when i paste the Material dimension in the Excel, i'm getting the following result:
Material/Month
January
February
March
Material 1
100
200
300
Material 1
400
500
600
Material 1
700
800
900
So, when i display the column chart, the material tag is incorrect:
as the image attached shows.

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

BEx Query results not getting updated

Hi,
I am using a BEx Query based on a multiprovider which is fetching data from a multiple remote cubes and multiple regular cubes.
Now when data in the source system is getting changed the corresponding remote cubes are getting update but query result are not getting re-fresh for at least 2 hours.
We have already tried doing logging out and and logging into the bex system.
Is there some cache setting which is required?
Default cache mode in query is 'Main memory cache without swapping'.
Kindly advice.
Regards
Vivek

Hi,
Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
By selecting your multiprovider .
Thanks,
Ranjan

Output of BOBJ (Web Intelligence Reports) are twice BEx Query Result

Hi Experts,
Incase of first level of hierarchy, correct values (i.e same as BEx Query) are displayed in BOBJ reports . However on selecting two and more levels of Hierarchy, values,twice the corresponding BEx query values, are displayed in BOBJ reports .
For e.g.
For level one of hierarchy (one level of object from hierarchy ):
Actual Amount keyfigure value in BEx Query : 100
Actual Amount keyfigure Value in BOBJ Report : 100
For if we select two and more levels of Hierarchy, then we get following inconsistent values:
Actual Amount keyfigure value in BEx Query : 100
Actual Amount keyfigure Value in BOBJ Report : 200
We have implemented SP5 ,as suggested in SAP note 1373220 . However issue still persists...
Can you please suggest, how to resolve this issue?
Regards
Mohit

We had the issue close to your issue. Basically, Webi does a Cartesian product of the characteristics value and duplicate the number of rows. But when we add the key figure in the report, it was showing the correct result.
Not sure, why the Key figures are also duplicating in your case. Please try adding removing characteristics and see if that resolves your issue.
- Danny

Using NVL in Query of Query resulting in error

I'm still using CF8 and Oracle 11G back-end.
When I use NVL in the query of query I got error....Can't I use NVL to check on null value? Please help
Here is my codes:
<cfquery name="GetC2" datasource="#Trim(application.OracDSN)#">
     SELECT CamID2, rel2_2,p_ln2,p_fn2,ins,l_year
     FROM prt_temp
     WHERE Ins = 'CC'
     AND l_year = '1481'
AND NVL(Child_LN2,' ') <> ' '
AND NVL(Child_FN2,' ') <> ' '
    </cfquery>
<cfif GetC2.Recordcount NEQ 0>
<cfquery name="CheckRel2C2" dbtype="QUERY">
SELECT CamID2, rel2_2
FROM GetC2
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
AND Ins = 'CC'
AND l_year = '1481'
</cfquery>
</cfif>
The error:
Error Executing Database Query.
Query Of Queries syntax error.
Encountered "NVL ( Rel2_2 ,. Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition,

NVL is an Oracle function, and is not available in ColdFusion Query of Query. If you are trying to check for null values, then use IS NULL or IS NOT NULL. So
WHERE NVL(Rel2_2,' ') <> ' '
    AND NVL(p_ln2,' ') = ' '
    AND NVL(p_fn2,' ') = ' '
becomes
WHERE Rel2_2 IS NOT NULL
    AND p_ln2 IS NULL
    AND p_fn2 IS NULL
-Carl V.

Query result caching on oracle 9 and 10 vs indexing

I am trying to improve performance on oracle 9i and 10g.
We use some queries that take up to 30 minutes to execute.
I heard that there are some products to cache query results.
Would this have any advantage over using indexes or materialized views?
Does anyone know any products that I can use to cache the results of this queries on disk?
Personally I think that by using the query result caching I would reduce the cpu time needed to process the query.
Is this true?

Your message post pushes all the wrong buttons starting with the fact that 9i and 10g are marketing labels not version numbers.
You don't tune queries by spending money and throwing resources at them. You tune them by identifying the problem queries, running explain plans, visualizing their output using DBMS_XPLAN, and addressing the root cause.
If you want help post full version numbers, the SQL statements, and the DBMS_XPLAN outputs.

Bex query structure authorization error when copying to Y name

Hi Gurus,
We are having a issue in BEX query. As per design, our IT team can copy Z queries to Y queries and modify/create Y queries in production but they cannot update/change Z queries.
One of the Z query is having structure and BW IT team is trying to copy that query to Y namespace but they can't edit the structure/key figures within that new Y query. . We created a ‘Y Structure’ within a ‘Y Query’ but still cannot edit/modify that Y-Structure. S_RS_COMP and S_RS_COMP1 has full access restricted by Y* in reporting component field.
Can anyone please help how should we proceed ?
PS: We don't have problem with other queries which don't have structures.
Regards,
Salman

HI Salman,
Looks like the structure is globally defined and thats the reason why the team is not able to edit it
Thanks
Abhishek Shanbhogue

BEx query : results and exceptions

Hi people,
I'm using BI 7.
I've two questions.
In a first part i want to know if i can use an exception in order to color all the line (characteristics + key figures) ?
Because just the key figures are colored with many options I tried.
In a second part, in the same query, i'm using a hierarchy, some characteristics and a key figure.
I want to have a line of results for each hierarchy node (node at the top), and too a line of results for a following field.
Like the following example :
Hierarchy node level 1:A field1:2 field2:x k_fig:17
global result for field1----k_fig:17
Hierarchy node level 1:A field1:1 field2:y k_fig:12
Hierarchy node level 1:A field1:1 field2:x k_fig:3
global result for field1----k_fig:15
global result for hierarchy node level 1-----k_fig:32
Hierarchy node level 1:B field1:1 field2:z k_fig:4
global result for field1----k_fig:4
global result for hierarchy node level 1-----k_fig:4
I hope you could help me for the two problems.
Points will be assigned,
Cheers,
Vince
Edited by: vince ricard on Apr 2, 2008 6:39 PM

Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help.

Content presenter: content source based on a query resulting in error

Hi all,
I am using a content presenter taskflow showing content based on a query. After some changes were made to the Webcenter Content instance (extra metadata field, extra profiles) the query is resulting in an error. In my WC_Spaces log I see the following message:
Caused By: oracle.webcenter.content.integration.RepositoryException: Jun 13, 2012 11:15:11 AM oracle.webcenter.content.integration.spi.ucm.search.SearchService search
SEVERE: An error occurred when searching repository WebCenterSpaces-UCM. When calling service GET_SEARCH_RESULTS, as user weblogic, at timestamp 6/13/12 11:15 AM, received status code -32. The search was Search[repositoryId=WebCenterSpaces-UCM, max to return=100, useFullTextSearch=true, useCache=true, sort="toProperty('dDocTitle') ASC", fullText="
        Metadata criteria((cm_contentType equals IDC:Profile:qblIntranetArtikel)AND(xqblGroep [any] equals Quobell)AND(xqblIntranetSubGroep [any] equals Opleidingen))
isOr=false"] and the parameter map was {ResultCount=51, FolderPathInSearchResults=1, SortField=dDocTitle, IdcService=GET_SEARCH_RESULTS, SortOrder=ASC, vcrAppendObjectClassInfo=1, StartRow=1, QueryText=(xqblGroep <matches> `Quobell`) <AND> (xqblIntranetSubGroep <matches> `Opleidingen`), vcrContentType=IDC:Profile:qblIntranetArtikel}.
The profile qblIntranetArtikel I am using already existed before the change were made and the query worked fine then.
In WCC I see the following error:
(internal)/6     06.13 11:15:10.272     IdcServer-551     -1 exception backtrace:java.lang.ArrayIndexOutOfBoundsException: -1(internal)/6     06.13 11:15:10.272     IdcServer-551     at java.util.Vector.get(Vector.java:696)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.data.DataResultSet.getStringValue(DataResultSet.java:2183)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at collections.CollectionFilters.doFilter(CollectionFilters.java:95)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:115)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.Service.executeFilter(Service.java:4095)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.SearchService.doResponse(SearchService.java:2081)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.Service.doRequest(Service.java:1956)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:437)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
(internal)/6     06.13 11:15:10.272     IdcServer-551     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
services/3     06.13 11:15:10.274     IdcServer-551     !csUserEventMessage,weblogic,CIS!csSystemCodeExecutionError java.lang.ArrayIndexOutOfBoundsException: -1services/3     06.13 11:15:10.274     IdcServer-551     at java.util.Vector.get(Vector.java:696)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.data.DataResultSet.getStringValue(DataResultSet.java:2183)
services/3     06.13 11:15:10.274     IdcServer-551     at collections.CollectionFilters.doFilter(CollectionFilters.java:95)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:115)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.Service.executeFilter(Service.java:4095)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.SearchService.doResponse(SearchService.java:2081)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.Service.doRequest(Service.java:1956)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:437)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
services/3     06.13 11:15:10.274     IdcServer-551     at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
services/3     06.13 11:15:10.274     IdcServer-551     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
services/3     06.13 11:15:10.274     IdcServer-551     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
services/3     06.13 11:15:10.274     IdcServer-551     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
When I select a single item to be shown in the content presenter taskflow, I works fine. It also works fine when showing all documents in a folder.
Does any body have an idea what might be the problem I am facing and how to fix it?
thanks in advance,
Harold

Hi all,
I found what caused the error. Someone had set the CollectionID metadata field in WCC to non-searchable. This resulted in an error in the CollectionsFilter.
Setting the field back to searchable in WCC solved the problem.
regards,
Harold

Installation of update KB2977320 results in error code 29569 and 45671

When trying to manually install the update KB2977320 after the automatic installation failed I get the following entries in my log:
2014-11-20 17:10:47 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\100\Shared\SqlWtsn.exe.config'
2014-11-20 17:10:47 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\100\Shared\SqlWtsn.exe.config' exists
2014-11-20 17:10:47 Slp: App config file c:\Program Files\Microsoft SQL Server\100\Shared\SqlWtsn.exe.config was not found
2014-11-20 17:10:47 Slp: Completed Action: NotifyProgressComplete, returned True
2014-11-20 17:10:47 Slp: ----------------------------------------------------------------------
2014-11-20 17:10:47 Slp: Running Action: FinalizeProgressStatus
2014-11-20 17:10:47 Slp: Completed Action: FinalizeProgressStatus, returned True
2014-11-20 17:10:47 Slp: ----------------------------------------------------------------------
2014-11-20 17:10:47 Slp: Running Action: CloseUI
2014-11-20 17:10:47 Slp: Stop action skipped in UI Mode Quiet
2014-11-20 17:10:47 Slp: Completed Action: CloseUI, returned True
2014-11-20 17:10:49 Slp:
2014-11-20 17:10:49 Slp:
2014-11-20 17:10:49 Slp: ----------------------------------------------------------------------
2014-11-20 17:10:49 Slp:
2014-11-20 17:10:49 Slp: Error result: -2068024447
2014-11-20 17:10:49 Slp: Result facility code: 1212
2014-11-20 17:10:49 Slp: Result error code: 29569
2014-11-20 17:10:49 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-11-20 17:10:49 Slp: Sco: Attempting to open registry subkey
2014-11-20 17:10:49 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2014-11-20 17:10:49 Slp: Sco: Attempting to get registry value DW0200
2014-11-20 17:10:51 Slp: Received request to add the following file to Watson reporting: C:\Users\schmieder\AppData\Local\Temp\tmp87E8.tmp
2014-11-20 17:10:51 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2014-11-20 17:10:51 Slp: Inner exceptions are being indented
2014-11-20 17:10:51 Slp:
2014-11-20 17:10:51 Slp: Exception type: System.IO.IOException
2014-11-20 17:10:51 Slp: Message:
2014-11-20 17:10:51 Slp: Das Verzeichnis ist nicht leer.
2014-11-20 17:10:51 Slp:
2014-11-20 17:10:51 Slp: Stack:
2014-11-20 17:10:51 Slp: bei System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
2014-11-20 17:10:51 Slp: bei System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive)
2014-11-20 17:10:51 Slp: bei System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive)
2014-11-20 17:10:51 Slp: bei Microsoft.SqlServer.Chainer.Infrastructure.WatsonService.CreateCab(WatsonBucket bucket)
2014-11-20 17:10:51 Slp: bei Microsoft.SqlServer.Chainer.Infrastructure.WatsonService.ReportFailures()
2014-11-20 17:10:51 Slp: bei Microsoft.SqlServer.Chainer.Setup.Setup.Start()
2014-11-20 17:10:51 Slp: bei Microsoft.SqlServer.Chainer.Setup.Setup.Main()
2014-11-20 17:10:51 Slp: Watson Bucket 2
Original Parameter Values
2014-11-20 17:10:51 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-11-20 17:10:51 Slp: Parameter 3 : System.IO.IOException@-2147024751
2014-11-20 17:10:51 Slp: Parameter 4 : System.IO.IOException@-2147024751
2014-11-20 17:10:51 Slp:
Final Parameter Values
2014-11-20 17:10:51 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-11-20 17:10:51 Slp: Parameter 3 : 0xAE9CC9E3
2014-11-20 17:10:51 Slp: Parameter 4 : 0xAE9CC9E3
2014-11-20 17:10:51 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-11-20 17:10:51 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-11-20 17:10:51 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-11-20 17:10:52 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2014-11-20 17:10:52 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-11-20 17:10:52 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20141120_170804\COMBIT\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2014-11-20 17:10:53 Slp: Das Verzeichnis ist nicht leer.
2014-11-20 17:10:53 Slp: Watson bucket for exception based failure has been created
2014-11-20 17:10:53 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-11-20 17:10:53 Slp: Sco: Attempting to open registry subkey
2014-11-20 17:10:53 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2014-11-20 17:10:53 Slp: Sco: Attempting to get registry value DW0200
2014-11-20 17:10:54 Slp: Submitted 2 of 2 failures to the Watson data repository
2014-11-20 17:10:54 Slp:
2014-11-20 17:10:54 Slp: ----------------------------------------------------------------------
2014-11-20 17:10:54 Slp:
2014-11-20 17:10:54 Slp: Error result: -1251036569
2014-11-20 17:10:54 Slp: Result facility code: 1390
2014-11-20 17:10:54 Slp: Result error code: 45671
Any help is very appreciated.
Thanks!

Hi Technowizard15,
As your description, you come across an error when you manually install security update(KB2977320). Based on my research, security update(KB2977320) is used for SQL Server 2008 R2 Service Pack 2. So firstly, please check if your SQL Server version is SQL
Server 2008 R2 Service Pack 2 according to Shanky_621's post. If it is not SQL Server 2008 R2 Service Pack 2, you need to install related security update according to your SQL Server version.
However, if the error occurs when you use SQL Server 2008 R2 Service Pack 2, please help to post full error message in Detail.txt(%Program Files%\Microsoft SQL Server\100\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt) for further analysis. For more
information about the process, please refer to the article:
http://support.microsoft.com/kb/955396. Additionally, based on my research, the issue could occur in the cases below.
1. Your account has no access to the following registry key: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer. So please check if your account has access to the registry. If it has no access, you could follow the steps below to troubleshoot
your issue.
a. Located HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and check Full Control. Next, Click OK.
d. Install the update KB2977320 again. Please stop any Antivirus software in the installation process.
2. Installer Package (MSI) is missing. Please check if MSI exists in C:\Windows\Installer. If it doesn’t exist, you could solve this issue by one of the methods. Then install the update KB2977320 again and check if the error still occurs.
a. Use a script.
b. Manually restore the files.
For more information about the process, please refer to the article:
http://support.microsoft.com/kb/969052
Regards,
Michelle Li

Incorrect query result with Top N condition and two structures

Hi,
I have created a query on a FI-GL infocube with the characteristic 0BUS_AREA in rows and two structures in columns. The first structure has two items / selections (each item is a selection of several GL accounts). The second structure has two items (the first one contains the key figure 0BALANCE for the current period and the second item is a formula that calculates the absolute value of the first item. The first item is hidden). The (simplified) result looks like this (sorry, not very pretty!):
Business Area Clients Clients fae
Business Area1 10 15
Business Area2 20 7
Business Area 3 15 8
Overall result 45 30
I then added one condition using the Top N operator. The condition is defined for all the elements of the structures. When I execute the query, I sometimes obtained an incorrect number of Top N records selected. The problem seems to occur when N is greater than the number of available Business Areas for an element of the structure.
For example, if N = 8 and data only exists for 5 Business Areas for the structure element Clients, I may end up with 10 Business Areas for the second structure element Clients fae when I only expect 9 (i.e. the top 8 Clients fae + 1 of the Top 8 Clients for which there is no data under Clients fae).
Has anybody encoutered that kind of problem ?
Many thanks.
François.

Pascal,this is a known behavior with conditions.When you apply condition it just hide the extra rows and it does not impact the result row.So your result row actually shows the value irrespective of the condition you apply.
Now with the help of local functions like calculate result as summation you can show the correct sum after applying the condition but when you try to use that result in some calculation then it takes the original value thereby discarding the calculated value.
Same is happening in your case as well.Its taking the original value i.e 350 and not the calculated sum after condition i.e 270.
Hope this helps.
Regards,
AL

BEx-Query results in error in SAPLRRI2 and KFB_FUELLEN_CONST

Similar Messages

Maybe you are looking for