BEx Query results not getting updated

Hi,
I am using a BEx Query based on a multiprovider which is fetching data from a multiple remote cubes and multiple regular cubes.
Now when data in the source system is getting changed the corresponding remote cubes are getting update but query result are not getting re-fresh for at least 2 hours.
We have already tried doing logging out and and logging into the bex system.
Is there some cache setting which is required?
Default cache mode in query is  'Main memory cache without swapping'.
Kindly advice.
Regards
Vivek

Hi,
Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
By selecting your multiprovider .
Thanks,
Ranjan

Similar Messages

  • Exporting BEx Query results to CSV or other files.

    Hi All,
    We have a report designed in WAD, which uses a BEx query to display department’s information. Because of amount of data in the results it crashes when u get all the Free Characters into ROWS(Error is : Result set too large(552244 cells); data retrieval restricted by configuration (maximum =500000 cells).  It is a requirement from the user to have all the free characteristics in the rows( which I can understand is not the right way to go ahead). As it is crashing when you add last characteristic(WBS Purpose)  into the rows, they aren’t able to export data into spread sheet from the results. (as there are no results)
    Now my question is…..is there any way we can export the results from BEX query into any format for example text or csv? If yes, can we schedule that process? Please note that this characteristics are displayed as hierarchies.
    Am new to SAP BW and its been only six months since I have been in this role. Any help would be much appreciated???
    I looked online and some where in the forum it was mentioned of using program RSCRM_BAPI, but looks like it needs some sort of downloads from SAP.
    Is there any other way to export the BEx query results?
    Cheers
    Sandeep

    Hello Sandeep,
    You can use the Item "Context Menu" in your WAD and in the properties by default you can see the Options:
    Export to Excel & Export to CSV will be there and also there are many options which you wanted to see.
    It works for you!!!
    With Regards,
    PJ.

  • Data is not getting updated in R3 from CRM

    Hi All,
               I have a small query pertaining to CRM Middleware.
    We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
    The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
    I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
    Is there any customization or setting in EEWB for updating the flag?
    Please help... Please let me know if u want more informaiton.
    Thanks
    Sanu

    Sanu,
    The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
    and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
    BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
    To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
    Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC.

  • Price for I/C (Cost) field in VF03 not getting updated for an Invoice

    hi,
    the amount field (KBETR) for condition type ZR04 in VR03, for a specific invoice generated, is coming out to be 0.00 USD.
    as a result, the condition value is also coming out to be 0.00 and hence, not getting updated.
    can anyone help me out with this?

    Hi Pratima,
    unfortunately i can only write that I am facing the same challenge at the moment. I will update the discussion as soon as I have a solution.
    Best regards
    Bjoern

  • FD33 - Receivable Field in Customer master is not getting updated

    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
    How can I control the general FI documents having various FI documents type as relevant to credit check?

    Apart from the above,please also check the below:
    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
    For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
    Any way coming into query not updating the receivables, please check the below points once again.
    1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
    2. Even if the above all points are checked including above all posts,then also still the same issue repeating  then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
    thanks,
    Srinu.

  • Acrobat 7.0 properties not getting updated

    Hello Everybody,
    The PDF properties of the file that i am changing in my application is not reflected in the PDF File
    I have used the below code to set the property:
    CAcroPDDoc acroPDDoc;
    acroPDDoc.SetInfo (_T("Creator"),pdfDocProperties.m_Creator);
    acroPDDoc.Save(1,strFileName) ;
    The document properties sets fine for the file in Acrobat 9.0 where this is not properly setting for Acrobat 7.0.
    Below is the code for the acroPDDoc.Save
    long CAcroPDDoc::Save(short nType, LPCTSTR szFullPath)
    long result;
    static BYTE parms[] =
    VTS_I2 VTS_BSTR;
    InvokeHelper(0x17, DISPATCH_METHOD, VT_I4, (void*)&result, parms,
    nType, szFullPath);
    return result;
    Is the syntax wrong or its as per the specification of Acrobat 7.0?
    Regards,
    Nethaji

    ok Aandi
    let me summarize what our problem is
    we are using the below code for setting document properties say "Eg: Title " for PDF file through our application
    CAcroPDDoc acroPDDoc;
    acroPDDoc.CreateDispatch(_T("AcroExch.PDDoc"))
    if ( acroPDDoc.Open( strFileName ) )
    acroPDDoc.SetInfo (_T("Title"),pdfDocProperties.m_Title);
    acroPDDoc.Save(1,strFileName) ;
    acroPDDoc.Close();
    The title field is not getting updated in the PDF FILE; Whenever "acroPDDoc.Save" is executed the Title filed gets updated with "Title" as it is .we have tried several scenarios given by you but still we cannot conclude this one.
    The acroPDDoc.Save code is :
    long CAcroPDDoc::Save(short nType, LPCTSTR szFullPath)
    long result;
    static BYTE parms[] = VTS_I2 VTS_BSTR;
    InvokeHelper(0x17, DISPATCH_METHOD, VT_I4, (void*)&result, parms, nType, szFullPath);
    return result;
    The above acroPDDoc.Save works properly for Acrobat 9.0.it updates the title field
    This problem occurs in Acrobat7.0 and not in 9.0
    This is our problem please help us.

  • Adhoc Query data not getting displayed on Portal

    Hi,
    I have a problem with custom Adhoc query data not getting displayed on the portal.
    It was getting displayed initially but after a user made some changes to the query its not getting displayed.
    The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
    Can anyone help me on this.
    Also if anyone can tell me how do i debug an Adhoc query from potal.
    Is there any tool to debug an Abap program from portal.
    I dont want to use trace,
    Thanks
    GT
    Message was edited by: GT

    Hi GT
    find out the EXACT query u want to launch if it's display
    in BW buisness explorer then change the iview property
    for that query in portal . right click on iview
    BEx Web Application Query String -> assign correct query
    regards,
    kaushal

  • New field in substituted VO not getting updated !!

    Hi,
    I want to add a new field to an existing page which was not yet available in the EO and in the VO. Therefore I created a new EO, created an association link (1 to 1) to the orginial EO and substituted the VO.
    I can show the newly added field on the page and the value seems correct but when I try to update it, it is not getting updated, however I don't receive any error message at all. I have generated the VORowImpl class, but it does not seem to be working somehow. Do I need to substitute more than just the VO?
    Am I forgetting something? What do I need to do to make it updateable?
    Thanks for your advice!!
    Best regards,
    Guy

    Kumar,
    The attribute I added to the VO is not transient, but calculated. I can see this in the attribute mapping. Querying the value is not a problem but the update is not doing anything.
    Any idea why?
    Thanks,
    Guy

  • KINAK field in Table KONV not getting updated with value W

    Hi,
    I have a PO where I am deleting a line item.
    After I delet line item the field KINAK in table KONV gets updated with value W.
    But I am getting instance where in some cases the field KINAK is not getting updated.
    The result is deleted line item is getting populated in PO output also.
    Regards
    Nandiini

    KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
    A     Condition exclusion item
    K     Inactive due to calculation basis/shipping material type
    L     Condition exclusion header or inactive at header level
    M     Inactive due to manual entry
    T     Inactive at header level
    W     The document item is statistical
    X     Inactive via formulae of incorrect
    X     Inactive via formulae of incorrect
    Y     Inactive because of subsequent price

  • Matlab workspace not getting updated while labview mex file is running

    Hi,
    Let me start from the overview of the system for better understanding.
    The system is to acquire data from a DAQ6070e using labview 7.1 . this data is then to be used in matlab for processing. All this needs to happen in real time hence the data is to be acquired from labview and outputted into matlab in real time.
    in order to do this we generated the labview and the matlab codes seperately. After days of hard work we managed to import the labview vi into matlab using a math interface toolkit, but now have run into another interesting problem.
    the workspace in matlab is not getting updated during the time the labview vi is running inside matlab. it only updates after the vi has run . for example if i need to monitor the system for 300 seconds then ideally the labview vi should output the samples for each acquisition and output it to matlab, what actually is happening is that the labview keeps running for 300 seconds without outputting any data during those 300 seconds and only outputs the last set of acquisition values at the end of the 300 seconds. Which beats the purpose of the whole program.
    Kindly help
    Regards
    Manuj

    Thanks Mate,
    What you said about "MEX file will not be able to "store" data between runs" ,i realised in the morning. as a result i dont think your suggestion of for loop will also be effective as labview mex file will not acquire data during matalb code execution and vice versa.
    Hence i have decided to do it the other way...we will now try to run the matlab code in labview.
    this leads to other problem
    As this is a real time operation i need to find out a way of storing the data into computer memory and then reading from it(when i say memory i do not mean writing it to a file and readin from it as that is slow) becasue i think the buffer i am specifying in my AI config is not big enough.
    I was thinking maybe i should use a RT FIFO queue but then i have not been able to find out the difference between buffer memory and fifo memory. ie is buffer memory supposed to be the ram memory or is it the hard disk memory?
    I am posting the vi here for easy understanding
    All help is very much appreciated
    Attachments:
    RT-loop2ver21.vi ‏231 KB

  • Billing due list not getting updated-deliver realted billing

    Hello,
    I am carrying out delivery related billing in CRM.
    When i make an order in CRM and carry out the  Goods movement (Post goods issue) and delivery in ECC,the document flow is getting updated in CRM.However,the billing due list is not getting updated.that is it does not show the delivery document to be billed.
    Is there something missing?
    Please advice
    Thanks
    Itty

    Hi Naresh,
    Can you please try to debug in the badi "CRM_UPLOAD_BEA_FILL " after saving the service order.
    (May be i think there may be some custom implementations in this badi where it checks  some conditions to be met were getting failed which results in  not generating of billing due lists).
    Thanks & Regards,
    Vishnu.

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

  • Tax is not getting updated in Sales Order Pricing Conditions

    Hi ,
    Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
    Following are the changes for in the standard Pricing:
    1) Created ZPSC condition type to calculate the sur-charge from Z-table
    2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
    So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
    We implemented the logic for updating values of  Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
    I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
    Please suggest how to update the Tax values correctly without manual update.
    Thanks ,
    Rajesh Sanapala.

    Hi Lakshmi,
    I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
    I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
    Thanks
    Ivy

  • Data is not getting updated in CRM

    HI experts,
    I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
    why this is happening?
    Is there any BDOC used in this case then how we can check that BDOC?
    Thanks,
    Jassi

    Hello
    I am sure that the problem occurs due to this.
    You need to know the error message. To do this:
    1) Choose any red document from transaction SMW01
    2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
    3) In the opening window there is a button "Errors". There is where you can find the error message.
    I hope it helps. Please, provide points if helpful.
    Joaquin

Maybe you are looking for