New field in substituted VO not getting updated !!

Hi,
I want to add a new field to an existing page which was not yet available in the EO and in the VO. Therefore I created a new EO, created an association link (1 to 1) to the orginial EO and substituted the VO.
I can show the newly added field on the page and the value seems correct but when I try to update it, it is not getting updated, however I don't receive any error message at all. I have generated the VORowImpl class, but it does not seem to be working somehow. Do I need to substitute more than just the VO?
Am I forgetting something? What do I need to do to make it updateable?
Thanks for your advice!!
Best regards,
Guy

Kumar,
The attribute I added to the VO is not transient, but calculated. I can see this in the attribute mapping. Querying the value is not a problem but the update is not doing anything.
Any idea why?
Thanks,
Guy

Similar Messages

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

KINAK field in Table KONV not getting updated with value W

Hi,
I have a PO where I am deleting a line item.
After I delet line item the field KINAK in table KONV gets updated with value W.
But I am getting instance where in some cases the field KINAK is not getting updated.
The result is deleted line item is getting populated in PO output also.
Regards
Nandiini

KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
A     Condition exclusion item
K     Inactive due to calculation basis/shipping material type
L     Condition exclusion header or inactive at header level
M     Inactive due to manual entry
T     Inactive at header level
W     The document item is statistical
X     Inactive via formulae of incorrect
X     Inactive via formulae of incorrect
Y     Inactive because of subsequent price

I have problem with my iphone 3gs , ISO 5.0.1 , i tried to update it to new 5.1.1 and not getting and showing below massage the iphone could not be updated. an unknown error occurred 11

I have problem with my iphone 3gs ( ISO 5.0.1) , it is stuck on apple LOGO and just restaring from time to time after long time will open then i am able to see all app so i tried to update it to new 5.1.1 but not getting update and showing below messege the iphone could not be updated. an unknown error occurred 11
thanks

if itunes can no longer pickup your ipod, and you cant even do anything to your ipod, your best option is to either call apple care, or just take it to the nearest apple shop. i had a similar problem, mines currently at apple care repairs and they might just end up giving me a replacement.

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Field TSABR is not getting updated in MHIS table.

Hi All,
The field TSABR (Scheduling Status: New Start Called) is not getting updated in MHIS table.
Please do tell me how it will get updated.
What is a logic behind it.
Many Thanks in advance.
Regards,
Sanjay Tiwari

Hi,
I checked it my system and that field was getting updated ..
For calls with status "New start called " will get updated in MHIS and for these call you will only have the field scheduling status :planned date called " as marked . pls check
regrds
pushpa

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Stationglobals in a Labview custom step type inside a new thread do not get updated

Hi,
I have a Custom Step type which I use to pass parameters to TestStand from a VI and vice-versa through some step fields. I run the VI inside a sequence in a new thread and expect the VI to update the parameters when I change them through the TestStand StationGlobals.
For example, I have a waveform injection custom step. I want to continuously inject a signal while I do some measurements on it. So, I put this step type in a sequence and ran it in a new thread.
I pass the VI parameter 'Stop_Injection' through a step field as shown in image 1. And I expect the step field to get updated when the new thread is run continuously by passing the corresponding stationglobal in the Pre-expression of the custom step (image 2). But this fails to happen. The VI does not get updated.
On the other hand, if I do not bother with the step field and directly pass the stationglobal (figure 3), it works perfectly.
Any idea why this is happening?
I hope I was clear in my question.
LabVIEW 8.6.1
TestStand 4.1.1
Message Edited by Changi on 08-06-2009 12:50 AM
Attachments:
1.JPG ‏92 KB
2.JPG ‏42 KB
3.JPG ‏91 KB

Hi,
In image 3 you are linked directly to the StationGlobal of which you are continually updating therefore seeing the changes.
In the other you are only linked to the Step.Stop_Injection and are only updating this valve from the stationglobals once in the pre-expression. You are not changing the reference.
Regards
Ray Farmer
Regards
Ray Farmer

Product ID is not getting updated in SC Goods /Service field

Hi Gurus,
While creating shopping carts in EBP, we are able to find the Product ID from the Good/Service find option, but when we select the Product ID in the search, it's not getting updated in the SC Goods/Service field.Also when we try to find the Cost center / WBS using find button it's not going to the search area after software upgrade.
Could you please suggest us why system is behaving like this.
Thanks
Sada

Hi Gurus,
Any Idea on this.
Also few of the Product ID's are getting updated from the search help to Goods /Service field of the SC and some are not getting updated. while debug the SC , we are geeting the error message as BBP_SC006, Its relavant to catlog. But we are not transfering the Product from catlog to SC item.
The error mesage as: Good/Service & does not exist.
Thanks & regards
Sada

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Field not getting updated in BDC while running in background

Hi Friends,
I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
Can anybody help me advicing why the field is not getting updated in background?
Thanks,
Bestin

Hi ,
Check the the log if you are using a session method and if call transaction then capture the messages for the same,
Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
Thanks & Regards
Jyo

Price for I/C (Cost) field in VF03 not getting updated for an Invoice

hi,
the amount field (KBETR) for condition type ZR04 in VR03, for a specific invoice generated, is coming out to be 0.00 USD.
as a result, the condition value is also coming out to be 0.00 and hence, not getting updated.
can anyone help me out with this?

Hi Pratima,
unfortunately i can only write that I am facing the same challenge at the moment. I will update the discussion as soon as I have a solution.
Best regards
Bjoern

Cred.lim.used field in FD32 not getting updated

hi All,
I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32
when I go to fd33 for a customer my Credit limit is 1,000,000.00
and Credit exposure is 1,138.28- but the %age is 0.00 %.
any suggestions
thanks,

Hi
Think logically how it will show the credit limit used in percentage just calculate
credit limit used*100/ total credit limit
1,138.28*100
1,000,000.00
will come to 0.11 % so system wont show it will consider only if it is more than 1%
regards

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
iPhone 5s
Software - IOS 8.1
iTunes - v12
I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
I have restored my phone but still has same problem.

Your IT person is an idiot.
http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

FD33 - Receivable Field in Customer master is not getting updated

FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
How can I control the general FI documents having various FI documents type as relevant to credit check?

Apart from the above,please also check the below:
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
Any way coming into query not updating the receivables, please check the below points once again.
1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
2. Even if the above all points are checked including above all posts,then also still the same issue repeating then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
thanks,
Srinu.

New field in substituted VO not getting updated !!

Similar Messages

Maybe you are looking for