Bex totals in row

All
we have the following query request, the results should display:
c1    c2          total        total2
j1     l1            10          120
j1    l2             20           200
j2    l1             11          120
j2   l2              33           200
total                 74          320
total2 is the total for all the selection l1 or l2. Instead I get in total2 only the data with characteristics j1 and i1.
thanks for any help

Abhijit N
what we are getting with sumrt or sumrt is this:
c1 c2 total total2
j1 l1 10 30
j1 l2 20 30
j1 total 30  60
j2 l1 11 44
j2 l2 33 44
j2    44 74
we would like the totals to be
c1 c2 total total2
j1 l1 10 21
j1 l2 20 53
j1 tot 30 84
j2 l1 11 11
j2 l2 33 53
j2    44 74
my example was incorrect before.
Thanks for your help.

Similar Messages

  • Different units in total sum row

    Hello Bex Experts,
    I have orders with different Units in a report. currently the total sum row show * for Mix
    How can I get the total sum for ST and KG like
    Total Sum 366 KG
    Total Sum 342 ST
    BR Matthias

    Hi Matthias,
    If you want to sum their numbers regardless of the UNITS, just use the NODIM() in formula..But if you need to add them and have 1 unit for the result, you must convert one of the them to another unit..
    Regards,
    Loed

  • KF at result row aligned right-justified, at total line row aligned left-ju

    KF at result row aligned right-justified, but at total line row it's aligned left-justified.  We have checked query/KF property in query design, but can't find the clue to fix it.  How to make these two aligned at the same direction in either left justified or right justified?
    Any idea?
    Thanks
    Message was edited by:
            Kevin Smith

    Hi Kevin,
    In the Bex Tool bar, there is a button for Layout, and under it there is Alignment option. You can try with that though I am not sure if it will solve your purpose.
    Regards.

  • Forecast horizon values are not being considered in Total demand row

    Hello Experts,
    We are in SCM 4.1 Version.
    I have a question regarding Forecast horizon consderation in Planning book.
    We have a weekly data view In our  Planning book,and in that planning data view "Total demand" row is not calculating correctly for the products with Forecast horizon .
    The entire Forecast is counted in Total demand without considering forecast horizon value for that Product.
    But this is working fine for Daily data view.
    I have also noticed that, Total demand values are calculating correcly in weekly view ( Forecast horizon value from the Product master is taken into account ) only when the Forecast horizon value crossing that week bucket.(i.e >7 days).
    But usually we will have a Forecast  horizon value of 3 days for all our products,.
    What should we do to get the Total demand values correctly?
    Thanks in advance..
    SAPLOUIS.
    Edited by: saplouis on Dec 5, 2010 6:42 AM

    Check the macros on data view
    Regards
    Aban

  • Totals in Row and column

    I have a requirement in report,
    It should display totals in row and column wise,
    Group open     Close     Total     
    A     10     5     15     
    B     15     10     25
    Total     25     15     40
    Thanks,
    Srini

    Send me the template and xml file to [email protected] and I will take a look.
    Thanks,
    BIPuser

  • Grand Total in Rows of Pivot Table

    Hi,
    How to display Grand total in rows of pivot table.
    Thanks and Regards,
    Kiran

    Hi,
    Now i got your question.
    No, its not possible to add aggregation for the measures.
    Instead you need to create some two dummy dimension table and use them in the pivot table and hide them.
    NOTE- We need to have two dummy dimension tables because then only summation symbol would come for the first dimension.
    And so it will appear you are doing a summation on the measure column.
    Regards
    MuRam
    NOTE: Please mention if this resolved your problem/still facing and close the thread.

  • Bex Total wron

    Hi,
    I have a Bex report in which there are 3 qty columns, the rows are displayed only if the Colum 1 is > 0, my problem is when all the records in Col 1 has 0 Total is shown(without any rows i.e. Col 2 and 3). How do I avoid the total line if Col <= 0 ?
    To filter the records I have used a condition ( col1 >0)
    Thanks and regards
    Fazal

    Hi,
    Try to use  a Condition col1 > 0 in the query.
    Hope it helps.
    Thanks & Regards,
    Rashmi.

  • BEx Analyzer: Result Rows Suppressed when condition is on

    Hi All,
    I have a BEx Query with below details:
    Drill down characteristics - A, B, C, D, E, F, G, H, I (total 9)
    Result Row set to Display for - A & F characteristics
    Key Figures - P, Q, R, S
    Condition is Active on column - S:  less than 100 (Show all the values less than 100 for column S)- This is a percentage calculated key figure.
    Characteristic Assignment in the condition - Individual Chars. and Char.Combinations, selected all characteristics that are in the drill down (A to I).
    Issue: When I run the report, everything works fine except the result rows, For both column A & F result rows are not displayed. It is getting suppressed somehow.
    I tried by selecting the first option in the Character Assignment (All characteristics in the drilldown independently). This works & I get the result rows as required, but now it doesnt show all the values that supposed to be on report.
    This is causing inconsistent data to the Business, even though cube values are correct.
    We are on SAP BI 7.0 with SAPKW70019 support package.
    I did research OSS notes, but unfortunately couldnt find any.
    Please help with your ideas & let me know if you need further inputs.
    Thanks in Advance.
    Umesh.

    Hi Jagan,
    In fact i've no problem with positive or negative values. Let me tell,
    in my query, my one column ( X)  shows top 10 customers' debt values. Another column i am trying to get X's total amount. But when my formula is "SUMRT X", im getting my total 200 customers' total debit. So this new column doesn't use my first query condition.
    How can i do my condition effective for this column too?
    Clear? maybe my English is not so enogh to tell the problem. Sorry about that.
    Thanks.
    Htc

  • Can't create chart from totals in Row Categories!!

    hi folks,
    My table has a about 50 vendors, and each vendor has 5 -20 individual salesmen. I did not create a header/total row for each vendor and instead, I opted to create categories, which collapsed the rows and gave me totals for each vendor.
    The problem is that I had wanted Numbers to create a chart with the vendor totals to track how they are doing month to month, but the program doesn't allow me to click on the chart icon. The icon only becomes active if I expand each category and select individual rows.
    Any suggestions?
    Many thanks!!

    Wow! Thanks so much for your lighting fast response!
    Ok, bear with me, as I'm not the brightest lightbulb when it comes to spreadsheets.
    Here's what I have so far:
    The column headers are: Vendor, Region, Type (Big Box, Mom + Pop, etc), Employee, January - December, and finally, YTD.
    I would love to:
    1) chart each vendor total through the year (not each employee)
    2) chart regional totals through the year
    3) chart type totals through the year
    And then at some point, compare years (that'll be in 2012).
    What I would not like to do:
    1) enter data twice or three times
    Any suggestions are much appreciated. Thanks SO much for your time.

  • How to get total of ROW in the UDF defined in header

    How would we calculate the TOTAL of a COLUMN at a ROW level and get it into UDF at Header level before saving.........
    Please need the Query urgently..........
    Ex There are 90 items entered into GRPO and now i need to calculate the total of BED, Cess, HeCess, VAT total to be displayed in UDF ie U_BEDTot, U_CessTot, HeCessTot, VAT created at Header Level.
    Need the Query....

    Hi sanjay,
    I can help u.
    Use this query
    IF @transaction_type = 'A' AND @Object_type = '20'
    BEGIN
    UPDATE OPDN SET
    U_BEDTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'BED@16' and DOCENTRY = @list_of_cols_val_tab_del),
    U_CessTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'eCess' and DOCENTRY = @list_of_cols_val_tab_del),
    U_HeCessTot = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = '' and DOCENTRY = @list_of_cols_val_tab_del),
    U_VAT = (SELECT SUM(taxsum) FROM PDN4 WHERE stacode = 'VAT4' and DOCENTRY = @list_of_cols_val_tab_del)
    WHERE DOCENTRY = @list_of_cols_val_tab_del
    END
    Since SAP 2005B, it refer PDN4 and ur tax split up data are stored in it.
    Create UDF in the title / header.
    1. BEDTot
    2. CessTot
    3. HeCessTot
    4. VAT
    Thanks Suda.
    Sanjay i hope it will help ful for you.
    SAGAR

  • Group Totals and row values to be repeated

    All,
    I have a data set like this
    Category     YearMonth     Section      Count1      Count2
    Category1     201401           S1              15              
    5
    Category1     201401           S2              10              
    0
    Category1     201402           S1                5               5
    Below is the result set that I want:
    Category     YearMonth     Section     %Count2
    Category1     201401           S1               16.66% i.e. (5/30) * 100     (30, because if you
    look at YearMonth 201401, I want to have a sum of 15 + 5 + 10 ))
    Category1     201401           S2                (0/30) * 100 = 0%          
    Category1     201402           S1                (5/10) * 100 = 50% (Division by 10, coz the sum of counts for 201402 is 5 + 5)

    Hi SqlCraze,
    According to your description, you want to calculate a percentage of Count1 in Total Counts. Right?
    In this scenario, we can set the detail rows group on YearMonth. Since we can specify scope for sum function, so we can get the total counts value for each group and calculate the percentage. please try the following expression:
    =Fields!Count2.Value/(Sum(Fields!Count1.Value,"YearMonth")+Sum(Fields!Count2.Value,"YearMonth"))
    We have tested this scenario, the design and result look like below:
    Reference:
    Sum Function (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Summarize total for Row items in pivot table

    Hi,
    I have a certain number of row items and few fact columns. 2 of the row items are level based measures that will summarize on other conditions so I cannot have them in the Fact section. But for these 2 row items (in the Rows section) I want them to summarize the values (a total sum under) as for the Fact columns, but it seems impossible to do this in a pivot table.
    I tried everything. This is a very irritating limitation to Pivot tables. Anyone have a good solution to this? (I have to use Pivot table because I have numbers showing for each month, table view will not work for this)

    Hi Alf,
    Just for everyone else checking this post out, here is the image you posted.
    !http://i45.tinypic.com/15x50r6.jpg!
    Now I see what you are talking about. Based on that screen-shot and your post, it looks like three of your measures (Arsbudsjett, Lok. budsjett, Akk.regnskap) are placed in the "Rows" section of the pivot table because you don't want them pivoted on the month. You just want them displayed as a single column and you want to pivot the other measure by month.
    However, it appears that OBIEE does not summarize items in the "Rows" section and only provides sub-totals for columns in the "Measures" section.
    I have two follow up questions
    1) What technique are you using to breakup the column "KOSTRA art"? There seems to be some kind of grouping at the value "Lenn og sosiale utgifter". What is special about that value on how is that grouping or break in the data created?
    2) One of those three measures, Akk.regnskap, does have a sub-total but the other two, Arsbudsjett, Lok. budsjett, do not. What is different about Akk.regnskap that causes it to have a sub-totals?
    Thanks for the follow up questions.
    -Joe

  • Remove the word "Total" in Row Totals in Pivot Tables

    Hi,
    Is it possible to remove the word "Total" that appears in Row Totals in Pivot Tables?
    Eg. If there are 2 Dimension Columns -- Year and Month .... and if we do row totals on Year
    The total appears as *'2008 Total'* or *'2009 Total'* etc. i.e. Each of the Values is followed by the word 'Total'.
    However, i would like the totals to display only the values '2008' or '2009' without the word 'Total'.
    Is this possible in OBIEE 11.1.1.5.0 ?
    Thanks,
    Ab

    Hi ,
    Goto Total -> Format label and type in @.This will remove the word"Total". I have tested this in 10g, try this and let me know if it works in 11g.
    Rgds,
    Dpka

  • How to dynamically calculate sub-total of rows and display when member changes in Hyperion Financial Report

    Requirement - I am writing a very  large reports from Hyperion Performance Cost management.
    Account is in Row. We are taking all level0 members in Row. In columns we are taking Entity,Cost Centers
    Current Structure of the Report
    41100  Entity1 Cost center1 20
    41100  Entity1 Cost center2 30
    41100  Entity1 Cost cenetr3 40
    41200  Entity 10 Cost center1 200
    41200  Entity 10 Cost center2 210
    41200  Entity 10 Cost center3 200
                 Grand Total  1000 ( For Example)
    User wants to dynamically add a sub total into the report when account (41200,41100) changes i.e. This is because , its a very large report of 100's of pages,
    Future State
    41100  Entity1 Cost center1 20
    41100  Entity1 Cost center2 30
    41100  Entity1 Cost cenetr3 40
    sub total 1 --------------------------90 ( This line should be automatically inserted here)
    41200  Entity 10 Cost center1 200
    41200  Entity 10 Cost center2 210
    41200  Entity 10 Cost center3 200
    sub total (n) -------------------------610  ( This line should be automatically inserted here)
                 Grand Total  1000 ( For Example)

    Hello,
    maybe re-consider this approach and say no to the users who request this. Try to think about other solutions.
    Sometimes a "no" helps them more than doing what they ask.
    You might export the whole in Excel. Then they can make their subtotals at every line.
    Regards,
    Philip.

  • Pb in BEx : Total result of differences between 2 restricted KF

    Hello,
    I have a big problem in the BEX and the best is to give you an example of a scenario:
          Quant1    Quant2         Difference(absolute value)
    M1   Q1  = 100  Q2  =  80    |Q1 – Q2| = 20
    M2   Q3  = 90   Q4  =  100   |Q3 – Q4| = 10
    Tot. R1  = 190     R2  =  180           R ??
    For the ratio R, I want to have the sum of the differences, ie R = 20 + 10 = 30 (instead of 190 – 180 = 10).
    If the materials are displayed, I can do that using the propertie of totalisation of result for the formula.
    The problem is when I remove the material in order to only have the result, I’d like to have the same result, ie the sum of each difference of the materials that compose the result (even if the materials are not displayed anymore). The reality is that it calculates the formula again with the quantities of the total line, ie |R1 – R2| = 10.
    I think the Bex can’t do that as from the moment when I use restricted key figures (which is the case in my scenario).
    Do anyone have an idea on how to have my report as I want ?
    Thanks for all the answers.
    Vanessa

    Hello Arun,
    Yes I have exactly these properties for the ratio of difference:
    "calculate result as" : summation
    "calculate single values as" : Nothing defined
    "Formula collision" : Nothing defined
    It doesn't matter changing the formula collision as there is no formula collision (I've tried).
    I think the problem comes from the fact that when the materials and the result are displayed, materials are considered as single values and the result as a result.
    When I remove the material, the result becomes a single value and therefore, it isn't correct.
    But I don't understand why there is no way to avoid this problem as it is a current problem (everybody should use differences or ratios...). There must be something to do but I don't know why.
    Thanks for your help

Maybe you are looking for