BI 7.0 more than 2 clients possible or not ?

Dear support,
I am basis person and i have installed BI 7.0 netweaver 2004s system , also business content 7.03 are done.I have given 001 client as BWMANDT field in RSADMINA table which is required for initial config. Now system is working fine for deveopers. Now i need to connect one more customer to this BI system.
And i need to provide access to them using different client apart from 001.
I wanted to know is it possible to work in more than one client in BW
If yes :---- should i add one more entry in rsadmina table , will RSA1 will work in that client too.......
Best Regards,
AjitR

Chetan,
I have 001 client set as BWMANDT filed in rsadmina . when i am trying to create new client it is allowing me to add entry but not allowing me login .
what could be the reason?
secondly if i am able to do client copy from 001 to new client
do i need to add this new client to rsadmina table along with 001
as i need both clients working as BW client.

Similar Messages

How to prevent executing more than one client from a machine?

Hi all,
Currently I am doing a client server project in java. The client is java swing. There is a requirement to prevent executing more than one client from a machine.
Now I am relying on socket for this. I listen to a port, say 15000 and when the second session is started it would give an exception at the socket. I know that this a trivial method. Can anybody please suggest a better method. Also is it possible to bring focus to already executing client, if the user tries to execute the client program again in the same machine?
An early answer to this question is highly appreaciated.
Thanks in advance
SSM

Thanks for the suggestion, but I dont think we can use socket for this. And again if we use file for the same as you described, I think it would sometime create a some serious side effects. Suppose after one client session is invoked, the power goes off. In this case the client shut down is not in the normal sequence and hence we cannot remove the file programaticaly. This creates big problem when the user tries to run client again.
I am really interested to know, is there any standard way in java which can be used to achieve this. Also is it possible to give focus to already executing client program if the user tries to invoke the client again.
Thanks
SSM

Can a session EJB be accessed by more than one client?

Hello,
I would like to have an instance of a persistent EJB which is accessible by more than one client and which will not be destroyed after usage. Apparently session beans can only be accessed by one client and are created every time they are accessed. In my case this creation is quite time and resource consuming. Is it an alternative to use an entity bean instead, even if the logic of the bean doesn't have anything to do with direct database access?
Thanks.

It seems to me that what you want is exactly a session bean will do. The EJB container is responsible to maintain a certain number instances (configurable) of your session bean and serve multiple clients at the same time. Session beans are not necessarily destroyed after serving a client. If you configure your ejb server to have a pool size of 2 to 100, then you will always have at least 2 instances (no more than 100 even there are a lot of client access) of this ejb ready to serve. The only thing not clear to me is that do you want to use only ONE instance of this bean or you don't care as long as multiple clients can access this bean's service? Since you mentioned that there is not a real database access, you can certainly use a Singleton but a 'regular' session bean with static fields should do it also if these fields will not be modified by clients.
PC

No more than 10 client computers appear in WSUS 3.0 Admin Console

Hi Folks,
I installed WSUS 3.0 SP1 on our SBS 2003 R2 Premium server a few days ago. I've noticed that the WSUS admin console will never display more than 10 client computers at a time. In fact, I've got roughly 16 clients that get used daily.
I've used the ClientDiag.exe tool to confirm that an invisible client actually does has connectivity to the WSUS server. Group policy settings have flowed through to the clients as well. When I took a quick look at WindowsUpdate.log, it seemed to confirm connectivity to the WSUS server as well. If I run: wuauclt.exe /resetauthorization /detectnow on an invisible client, the client will then show up in the admin console, but at the same time, a previously displayed client will disappear from view. 10 clients seems to be the upper limit for admin console viewing.
Where should I be looking? Thanks, Derek.

Hi Folks,
I installed WSUS 3.0 SP1 on our SBS 2003 R2 Premium server a few days ago. I've noticed that the WSUS admin console will never display more than 10 client computers at a time.
If I run: wuauclt.exe /resetauthorization /detectnow on an invisible client, the client will then show up in the admin console, but at the same time, a previously displayed client will disappear from view. 10 clients seems to be the upper limit for admin console viewing.
This is a classic symptom of duplicated SusClientIDs caused by cloning an image with an already present SusClientID.
Delete the SusClientID registry value from the registry key
HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate
on EVERY PC
and reboot (or restart the Automatic Updates service)
and THEN run wuauclt /resetauthorization /detectnow
which will force the WUA to generate a new (unique) SusClientID and reregister with the WSUS Server.
Lawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)
Hi,
I have the same issue. My S.O is Windows 2003 R2 Standard. ¿any idea?
admin
Yes. The ANSWER provided on June 12th and marked as The Answer IS the answer.
See KB903262 for explicit details
Lawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com

My iphone 4 is stuck in super large screen view. tried rebooting, syncing, restore, shutting down etc. my grandson 'enlarged' the view more than is normally possible. Help please!

My iphone 4 is stuck in super large screen view. tried rebooting, syncing, restore, shutting down etc. my grandson 'enlarged' the view more than is normally possible. Help please!

Thank you for the prompt and correct reply, I'm now back in the land of the living and will now cancel my genius bar reservation at my local Apple store. Thanks again R.

Dileama: Does my server accept more than one client

i created a simple server and a client app. but i am unable resolve wether the server is going to accept more than single client. if not, then should i implement threads to accept more than one client on my server.

i created a simple server and a client app. congrats!
but i am unable resolve wether the server is going to accept
more than single client. Not sure what you mean here.... Do you mean "Should I allow it to accept more than one client at a time?" If so, then that's up to you, isn't it?
if not, then should i implement threads to accept more than
one client on my server.If so, you mean. Yes, if you want multiple clients to connect, you have the server socket accept the socket connection from the client and pass that socket to a new thread which handles the connection, then the server socket would be free to accept another connection.
I'm only familiar with the old I/O package, not the New I/O stuff, so this is a bit old school:
ServerSocket ss = new ServerSocket(1234);
while(true) {
   Socket s = ss.accept();
   newClient(s);
private void newClient(final Socket s) {
   Thread t = new Thread() {
      public void run() {
         try {
            BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
            PrintWriter out = new PrintWriter(new OutputStreamWriter(s.getOutputStream()));
            out.println("yes? what is it?");
            out.flush();
            String line;
            while((line = in.readLine()) != null) {
               out.println("ha ha, you said '" + line + "'");
               out.flush();
         } catch(Exception e) {
            try {
               s.close();
            } catch(Exception e) {
   t.start();
}

Airport Extreme refusing to accept more than 7 clients

Our airport extreme (7.2.1) used to be happy with at least 11 clients. Four people in our office now own iPhones. When all four iPhone owners are in the office, not only are they unable to connect to the airport extreme, but some Macs are also unable to connect. Our airport extreme refuses to accept more than 7 clients. The logs in AirPort Utility don't show anything related to client refusals. All but one of the Macs are on Tiger - the other is running Leopard.
Any thoughts appreciated.
Thanks
Paul

It is the extreme, my mistake in the previous post.

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Overlay calendar with more than 9 colors possible?

Hello,
I found in this forum a solution to customize the colors in the calendar overlay, but I have more than 9 calendars and looking for more colors. It this possible?

Yes, you can. Check this for more details
http://davidlozzi.com/2012/06/20/customize-the-sharepoint-calendar-colors/
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

ALV, sums, more than one WAERS, WAERS is not shown

Hello,
I have a problem:
I have a table which contains WRBTR AND WAERS.
There are more than one possible waers.
So I have a table for example:
100   EUR
1000 EUR
500 EUR
700 USD
800 EUR
The sum line looks like:
2600 EUR
700
The second WAERS is missing.
Why does the report show the EUR and not the USD?
I want both WAERS.
Any idea?

Hi,
Check this code it works fine.
DATA : BEGIN OF WA_JESUS,
         V_NO TYPE I,
         V_M1(3) TYPE c,
       END OF WA_JESUS.
DATA : IT_JESUS LIKE HASHED TABLE OF WA_JESUS WITH HEADER LINE WITH UNIQUE KEY V_m1.
IT_JESUS-V_NO   = 700.
IT_JESUS-V_M1 = 'USD' .
COLLECT IT_JESUS.
IT_JESUS-V_NO   = 800.
IT_JESUS-V_M1 = 'EUR' .
COLLECT IT_JESUS.
IT_JESUS-V_NO   = 700.
IT_JESUS-V_M1 = 'EUR' .
COLLECT IT_JESUS.
LOOP AT IT_JESUS.
WRITE : / IT_JESUS-V_NO,
          IT_JESUS-V_M1.
ENDLOOP.
Thanks,
Reward If Helpful.

While clearing document has more than 999 line items system not allowing

Hi,
We have an issue with FI-Customer Clearing. While clearing the error is appearing as document has more than 999 line items. after the detailed checking we found that there are lots of line items posted to Real Exchange Rate diff that to COPA.
To reduce the maximum line items SAP is suggesting to deactivate the Real exchange rate diff.postings to COPA.
Regards,
R.Kumar.

Hi,
Please check SAP Note 1353125
Thanks

Contact with more than two Addresses on Bold not all showing on device

I have a blackberry bold and noticed that when i input more than 2 addresses in Outlook on the desktop, the 3rd one (called "other") shows up on the desktop but does not show on the handheld? is this a bug or is there a trick to having all three addresses visible? It seems odd to have the Other Option if it is i not able to be viewed remotely? Many thanks for anyone's help here.

You will need to "map" that other address field to your BlackBerry for syncing.
1. Connect your BlackBerry® device to your computer.
2. Open the BlackBerry Desktop Manager.
3. Double-click Synchronize.
4. On the Configuration tab, click Configure synch.
5. Select the Address Book check box.
6. Click Configure > Advanced Settings.
7. Click Field Mapping.
8. Map a field in the right column to a custom address book field in the left column.
9. Click OK.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

1 big house - 1 IP address - more than 5 clients?

Hi there.
I’d like to ask this fantastic discussion group for advice on the following:
I (more or less) voluntarily accepted the task to wirelessly connect our house to the internet using cable internet service. This is the situation:
Our 2.5 floor (sizable) house accomodates 10 rooms translating into up to 10 individual people/computers which want to connect to the internet wirelessly at the same time.
A Netgear wireless gateway (came with the cable contract) has been extended via ethernet using an Airport Extreme base station. As an additional extension, an Airport Express station was configured to connect wirelessly to the Airport Extreme as a remote base. The Airport Extreme base was set to share the single IP address that was given to us by our ISP using the 10.xyz... numbering system (which is different than what our ISP uses). The Netgear uses channel 1, the two Apple stations channel 11 and all devices were distributed in several rooms of the basement.
My questions would be:
1. Since the Airport Extreme base distributes addresses using DHCP and NAT, is there an upper limit on the number of computers that can have internet access at the same time (our ISP says that only up to 5 computers can be hooked up at the same time using the Netgear device)?
2. If it’s possible to have up to 10 computers connected this way, would the only thing restricting the perfomance for us all be the connection speed (in addition to the reception, of course), i.e. could we get away by increasing the connection speed to make things smoother (by upgrading our contract with the ISP; we're on 6 Megs right now)?
3. Is this a reasonable way to set things up or are there smarter alternatives?
I am aware of the fact that i could try out a lot more on my own than i already did, it’s just that the other people are not totally crazy about this kind of experimentation (we still have to work on some reception issues in addition) so, i am asking to avoid a revolt
Thanks bunches.
PB G4 Mac OS X (10.4.3)
PB G4 Mac OS X (10.4.3)
PB G4 Mac OS X (10.4.3)
PB G4 Mac OS X (10.4.3)

Your method is reasonable, though not optimum. However it may be the best for you needs, since you ended up not having to run any Ethernet cabling.
In my own home, we have both wired and wireless connections. I use multiple Access Points, connected back to the router to distribute the wireless signal though out the house, and to an out-building about 250 feet away. Each AP has the same SSID and security settings, but they are configured to use different channels, in our case 1, 6, and 11. Two of the Access points use omni antennas to distribute the signal within the house, and the third uses a directional semi parabolic reflector antenna to send the signal to the out building.
The advantage of using multiple Access Points via wired Ethernet is that you don't downgrade the wireless performance by having to repeat the signal using a wireless repeater.
As far as the Netgear cable modem. I would guess that your cable company has it configured to only have a limited number of DHCP assigned IP's available. Since you have the Cable Modem connected to the Airport Express, and the Airport Express is handling your DHCP IP assignment, you should not have an issue with the "5" user limit.
As far as upgrading your cable connection, only you can decide if a 6 MB connection is enough (I would think so). However, I would be more concerned about the upload speed then the download.
Tom N.

BI 7.0 more than 2 clients possible or not ?

Similar Messages

Maybe you are looking for