BI 7.0. Standard cubes and reports for SD, MM, FI, CO, PP, PM
Hi All,
I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
I tried searching but no avail
<removed by moderator>
Thanks in Advance
Nathan
Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM
Can you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps.
Similar Messages
-
Report for shedule vs supply and report for opening stock at back date.
Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
VimleshHi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu -
BW related HR cubes and reports
Hi any one explain me abt the bw related Hr cubes and reports.
If possible please give me example of cubes and reports.
Thanks
MadhaviDear Madhavi,
for HR you have several sub modules are there.. under HR which you want..
here i'm giving;
1. Personnel Administration--- cubes are 1. 0PA_C01
2. 0PAPA_C02
Queries are 0PA_C01_Q001
0PA_C01_Q012
0PA_C01_Q021
0PA_C01_Q011
0PA_C01_Q006
0PA_C01_Q020
0PA_C01_Q019
0PA_C01_Q024
0PA_C01_Q013
0PA_C01_Q015
0PA_C01_Q014
0PA_C01_Q016
0PA_C01_Q002
0PA_C01_Q003
0PA_C01_Q010
0PA_C01_Q022
0PA_C01_Q005
0PA_C01_Q017
0PA_C01_Q007
0PA_C01_Q009
0PA_C01_Q023
0PA_C01_Q018
0PA_C01_Q0101
0PA_C01_Q0102
0PA_C01_Q0103
0PA_C01_Q0104
0PA_C01_Q0110
0PA_C01_Q0111
0PA_C01_Q0112
0PA_C01_Q0113
2. for Recruitment .. -
CUBEs are only one---0PARC_C01
Queries are -- 0PARC_C01_Q002
0PARC_C01_Q008
0PARC_C01_Q016
0PARC_C01_Q006
0PARC_C01_Q003
0PARC_C01_Q015
0PARC_C01_Q007
0PARC_C01_Q017
0PARC_C01_Q004
0PARC_C01_Q005
0PARC_C01_Q009
0PARC_C01_Q001
0PARC_C01_Q010
0PARC_C01_Q011
0PARC_C01_Q012
0PARC_C01_Q013
0PARC_C01_Q014
like this there are several modules are there.. i think it is usefull for you..
thnaks
@jay -
Can anyone send me the link related COPA Cubes and Reports
I guess if you want links on help.sap.com you can search and find the same too!!
Hi,
can anyone send me the COPA Standard cubes and Reprots list and
can anyone send the link where we get the above objects ...
Regards,
Suman
Edited by: Arun Varadarajan on Feb 11, 2009 12:58 PMHi.......
Go to RSA1 >> Business content >> Click on Object Types >> There click on Infocube >> Expand the node >> Click on Select Objects.............there search for the Term COPA...........u will get all the standard COPA infocubes.......
Check this.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Regards,
Debjani.... -
Where can we find Business content Cubes,DSo,Reports for CS,PM,Treasury Man
Hi
Where can we find Business content Cubes,DSO,Reports for CS,PM,Treasury Management modules in help.sap.com. I searched in help.sap.com.But i haven't get exact link in the site. I haven't have access for the BI system.Can any list out the cubes ,DSO's,report that are in Business content for the above modules or give me the help.sap.com links, so that i can go through on it. It is for BI 7.O.
Does is there any differences in Business content objects for SAP BW 3.5 and SAP BI 7.0.
Thanks®ards
RevathiYou can find the businee contect in SAP Network Libraray
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
where you will find all the information.
Business content is no differnce between in 3,5 or 7.0..may add few more -
List of SD ,FICO and Retail cubes and Reports
Hi,
I need list of Cubes and Reports related to SD,FICO and retail.
<removed by moderator>
Regards,
Shiva Kumar G.C
Edited by: Siegfried Szameitat on Nov 12, 2008 11:21 AMHi,
Goto BI content in RSA1 and you will be able to see the list of Queries and Cubes related to the SD and FICO modules.
Actually it's too long to type all the details here
Regards,
Balaji V -
Standard script and code for output control ticket in IW32
Hi,
I am working on a output control ticket which gets printed using transaction IW32.
I have to create Z driver program and z form and attach it to shop paper.
I just wanted to make sure that RIPRCT00 and PM_COMMON are the standard program and form for this output control ticket.
Because even though if I keep a break point in the program RIPRCT00 to see the data its fetching, when I do the print preview after going in IW32 I don't go inside the standard program RIPRCT00.
So I am wondering if RIPRCT00 and PM_COMMON are the standard prohgram and form attcahed with output control ticket ?You must enter something in the form. The reason for this is because in the program when it is going to execute the print of the papers, it is call the subroutine(form) of the print program. It gets these values from your configuration in SPRO. It is doing something like this.
perform print_paper in program zriprct00.
Of course, "print_paper" and "zriprct00" are variables retrieved from the configuration.
So, in summary, In SPRO, configure the output type to use the PRINT_PAPER form of program "ZRIPRCT00" and the sapscript form ZPM_COMMON.
If you are developing a completely new "Z" print program, you must have an entry point in which the program is executed. You will have to have a subroutine(form) very simular to PRINT_PAPER, or you can just copy and paste that code into your new program.
Make sense?
Regards,
Rich Heilman -
Need to learn forms and reports for 10g
Hi,
I need to learn forms and reports for 10g urgently for windows. Where can I download the software from..........I am a newbie in this field........Thank you.......Big red button - top right
(Didn't someone say just the same thing last week) -
Hi gurus
can anybody provide information about customized cubes and queries.
it means how to define and what will be the naming.
can i get some examples about these .
Regards,
Hari.Hi,
Pls check things like
http://help.sap.com/saphelp_sem60/helpdata/en/cb/9e973cc73af456e10000000a114084/frameset.htm
http://help.sap.com/saphelp_sem60/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6466e07211d2acb80000e829fbfe/frameset.htm
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself! -
Changing the Dunning level and reports for Dunning
How can I change the 'Dunning level' for line items in the 'Dunning History/Dunning overview'? I have read in help.sap that I can change it, but am not able to find where I could do that.
link: http://help.sap.com/erp2005_ehp_03/helpdata/EN/bc/2127c4265911d286d6006008bbc8e8/frameset.htm (In 3rd para).
Can anyone tell me if there are any reports available to view the 'Dunning list'(other than Dunning History in F150).
Also, Our client needs a report which shows a list of all 'customers' and 'line items' Blocked for Dunning.
Please give me your suggestions ASAP.
Thanks
Edited by: sapfan 20062007 on May 3, 2008 10:39 PMThanks .
I'm looking at running the ALFS editor . I'm in WebAS 7.00 . The Themes/templates and brand colours on the left frame does appear but the bsp page does not appear . used the standard bsp page which appears as a default ( bsp add it05 ) . The error message is as follows
The following error text was processed in the system:
BSP Exception: Das Objekt entrypoint.htm_sap-themeRoot=/sap/public/bc/ur/design2002/themes/alfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F in der URL /sap/bc/bsp/sap/it05/entrypoint.htm&sap-themeRoot=%2fsap%2fpublic%2fbc%2fur%2fdesign2002%2fthemes%2falfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ist nicht gültig.
But if I run the bsp application manually then the right theme does get picked up . I made the entry in the bspthemeroot table and put in the alfs parameter in the above url ( 1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ) . The bsp application works fine but not the alfs editor . Any ideas ? -
Hi Friends-
Can anybody share with me the list of Standard Inbound Idocs and the standard Reports / FM to upload HR infotype.
pls make note that this is inbound and not outbound
Points will be there for sure .
Regards
MeetaHello,
These are some of the IDoc Type which are used in HR Module.
HRMASTER02
HRMD_A07
HRMD_ABA05
HRMD_B04
HRMD_WFM
HROTIN
HROT_BRM
HROT_CAP
HROT_USTP
Thanks and Regards,
Venkat Phani Prasad Konduri -
Validate Standard ECC Procurement Reports for BI Procurement Report
Hi Experts,
Are there any standard SAP reports whereby I can find the:
Acquisition, operation, maintenance and disposal costs of an Equipment/Asset by procurement cost type,
Acquisition, operation, maintenance and disposal costs by an Equipment/Asset purchasing org,
Acquisition, operation, maintenance and disposal costs by an Equipment/Asset purchasing org, by asset type.
The purpose of this is to validate cost values in a Total Cost of Ownership BI report.
Thanks
LindsayCan you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps. -
Need standard BAPI and Table for PO order
Hi all,
is there any standard bapi for vendors last purchase order (based on document type).
thanks in advance.
Edited by: Dhanush on Oct 21, 2008 1:25 AMok i cleared.i prepare report like this..
types : begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
bsart type ekko-bsart,
*ernam TYPE ekko-ernam,
*pincr TYPE ekko-pincr,
*lponr TYPE ekko-lponr,
end of ty_ekko.
TYPES :BEGIN OF ty_ekpo,
ebeln TYPE ekpo-ebeln,
matnr TYPE ekpo-matnr,
ebelp TYPE ekpo-ebelp,
werks TYPE ekpo-werks,
END OF ty_ekpo.
data: maxdt TYPE ekko-ebeln.
data : it_ekko type table of ty_ekko,
it_ekpo TYPE TABLE OF ty_ekpo,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo.
parameters : lifnr like ekko-lifnr .
SELECT MAX( ebeln ) INTO maxdt FROM ekko WHERE lifnr = lifnr .
*select ebeln lifnr bedat bsart into table it_ekko from ekko where lifnr = lifnr AND bsart = bsart.
*select matnr ebelp werks into wa_ekko1 from ekpo where matnr = matnr AND bsart = bsart.
select ebeln lifnr bedat bsart into wa_ekko from ekko WHERE lifnr = lifnr AND ebeln = maxdt.
ENDSELECT.
select ebeln matnr ebelp werks from ekpo into TABLE it_ekpo where ebeln = wa_ekko-ebeln. .
write: / 'Vendor', 10 'Purchasing Doc' , 30 'Document type', 45 'Documentdate' , 65 'Material', 79 'Item number', 94 'plant'.
ULINE.
loop at it_ekpo into wa_ekpo.
write : / wa_ekko-lifnr,
10 wa_ekko-ebeln,
30 wa_ekko-bsart,
45 wa_ekko-bedat,
65 wa_ekpo-matnr,
79 wa_ekpo-ebelp,
94 wa_ekpo-werks.
endloop.
Edited by: Dhanush on Oct 22, 2008 3:23 AM -
Using ME59 and report for difference amount
Hi Experts,
We have a business issue as follows:
we have one trading plant and one manufacturing plant and one vendor to supply raw mateials tray A and tray B. Sytem is made like APO is runing in manufacturing plant and ECC MRP running in trading plant at the same time from monday to thursday 10 P.M. once the MRP runs in trading plant and manufacturing plant a sub contract order will get create to manufacturing plant to manufacture the final product VIA SUB CONTRACTING ORDER.. The MRP runs at 10.30 in both trading and manufacturing plant it takes 4 hours time...we proposed to use ME59 for processing automatic PR generations in back ground after completion of MRP run. Please can we suggest to run in ME59 in background? or is there any other options?or is it possible run my user ?
Issue 2: Report preperations for difference of orders
The orders are coming from different countries like...US, Austraila, and Europe to trading plant it will creates a lot size for the vendor who supply raw materials...if the lot is 6000... trading plant recieves 8000 orders so there is a difference of 2000 .. lot size is limited to 6000 so they are maintaing it in excel sheet presently they want to maintain it in report...please suggest how we can solve this difference? . this automation should be done between vendor and manufacturing plant.
Please kidnly support..
Thanks in Advance
GANESHFor many years automatic PO creation is already ME59N. And it should only be used if your master data ( vendor, material, info record) is in a very good shape so that the users do not need to enter or change anything, e.g. could just click save in ME21N
your second scenario is very vague, your customers order the finished material from the trading plant. the trading plant orders at the manufacturing plant. The manufacturing plant orders raw materials from the vendor to manufacture the finished material.
Why does the trading plant get 6000 if 8000 are ordered, who's fault is this?
What is the reason for an extra Excel sheet (this is usually a fall back if users are not trained enough and do not understand the processes and do not know how to use SAP to track)
if you want automate anything between manufacturing plant and vendor, then you need to tell what you want automate. In general an automation should be done for processes that work well and do not need any human interaction. And automation cannot solve your problems with getting/receiving less than ordered -
Oracle Standard Edition and GoldenGate for replication?
The Question:
Can GoldenGate run in a Standard Edition RAC ==> Enterprise Edition standalone environment and perform the required rule-based replication without requiring an upgrade of our RAC Standard Edition to RAC Enterprise Edition?
The environment:
Source System: 2-node RAC running Standard Edition 10.2.0.5 (RHEL5 x86-64)
Target System: 1-node running Enterprise Edition 11.2.0.1 (RHEL5 x86-64)
The requirement:
Lossless one-way replication in "real time" of selected schema while excluding selected DDL/DML based on multiple rules.
Present solution:
LogMiner, but there is a known LogMiner bug (p8977287) that causes data loss when one RAC node goes down or is evicted from the cluster. The bug is reportedly patched in 11.2.0.2 and is slated to be fixed in 12.x.
Thx.Yes. Simple enough, it can extract from SE, even XE!
Maybe you are looking for
-
This is Naresh, new to SAP-MM. Iam getting an error while creating PR. The error is "Enter rate EUR/INR rate type M for 3:01:2009 in the system settings". Please anyone clarify my error.
-
Creating user accounts through ARD3 on client machines
Hello. I am trying to create a secondary local admin account on some machines that are running ARD3/OS X 10.4.8. Right now, I am using only one machine as a test before attempting this on the several hundred machines I need to do this on. I used this
-
Opening a word file from oaf page
Hello all, we have a word file which we need to open from OAF page. Is it possible to achieve this using personalization? If yes, please give me the steps. If not, we we need to go for customization to achieve this, whichis the approach on that? Than
-
Installtion from discs not working
I replaced my laptop with a desktop and I am trying to install Adobe Premiere Elements 10 from my discs, I keep getting an Error 1303. The installer has insufficient privileges to access this directory: C:\Program Files (x86)\Adobe\Photoshop Element
-
Hi, Ive recently installed the CS6 suite and all was working fine although now I cant even open Photoshop, this error message keeps coming up when i try to open it: An unexpected and unrecoverable problem has occurred. Photoshop will now exit. I