CUBES AND REPORTS

Hi gurus
can anybody provide information about customized cubes and queries.
it means how to define and what will be the naming.
can i get some examples about these .
Regards,
Hari.

Hi,
Pls check things like
http://help.sap.com/saphelp_sem60/helpdata/en/cb/9e973cc73af456e10000000a114084/frameset.htm
http://help.sap.com/saphelp_sem60/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6466e07211d2acb80000e829fbfe/frameset.htm
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Similar Messages

  • BW related HR cubes and reports

    Hi any one explain me abt the bw related Hr cubes and reports.
    If possible please give me example of cubes and reports.
    Thanks
    Madhavi

    Dear Madhavi,
          for HR  you have several sub modules are there.. under HR which you want..
    here i'm giving;
    1. Personnel Administration--- cubes are  1.  0PA_C01
                                                                2.  0PAPA_C02
      Queries are  0PA_C01_Q001
    0PA_C01_Q012
    0PA_C01_Q021
    0PA_C01_Q011
    0PA_C01_Q006
    0PA_C01_Q020
    0PA_C01_Q019
    0PA_C01_Q024
    0PA_C01_Q013
    0PA_C01_Q015
    0PA_C01_Q014
    0PA_C01_Q016
    0PA_C01_Q002
    0PA_C01_Q003
    0PA_C01_Q010
    0PA_C01_Q022
    0PA_C01_Q005
    0PA_C01_Q017
    0PA_C01_Q007
    0PA_C01_Q009
    0PA_C01_Q023
    0PA_C01_Q018
    0PA_C01_Q0101
    0PA_C01_Q0102
    0PA_C01_Q0103
    0PA_C01_Q0104
    0PA_C01_Q0110
    0PA_C01_Q0111
    0PA_C01_Q0112
    0PA_C01_Q0113
    2.  for Recruitment .. -
    CUBEs are only one---0PARC_C01
    Queries are --   0PARC_C01_Q002
    0PARC_C01_Q008
    0PARC_C01_Q016
    0PARC_C01_Q006
    0PARC_C01_Q003
    0PARC_C01_Q015
    0PARC_C01_Q007
    0PARC_C01_Q017
    0PARC_C01_Q004
    0PARC_C01_Q005
    0PARC_C01_Q009
    0PARC_C01_Q001
    0PARC_C01_Q010
    0PARC_C01_Q011
    0PARC_C01_Q012
    0PARC_C01_Q013
    0PARC_C01_Q014
    like this  there are several modules are there..  i think it is usefull for you..
    thnaks
    @jay

  • List of SD ,FICO and Retail cubes and Reports

    Hi,
    I need list of Cubes and Reports related to SD,FICO and retail.
    <removed by moderator>
    Regards,
    Shiva Kumar G.C
    Edited by: Siegfried Szameitat on Nov 12, 2008 11:21 AM

    Hi,
       Goto BI content in RSA1 and you will be able to see the list of Queries and Cubes related to the SD and FICO modules.
    Actually it's too long to type all the details here
    Regards,
    Balaji V

  • BI 7.0.  Standard cubes and reports for SD, MM, FI, CO, PP, PM

    Hi All,
    I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
    I tried searching but no avail
    <removed by moderator>
    Thanks in Advance
    Nathan
    Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM

    Can you tell  how did you search ???
    Just go to RSORBCT transaction and go to infocubes :
    Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
    If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
    Hope this helps.

  • Can anyone send me the link related COPA Cubes and Reports

    I guess if you want links on help.sap.com you can search and find the same too!!
    Hi,
    can anyone send me the COPA Standard cubes and Reprots list and
    can anyone send the link where we get the above objects ...
    Regards,
    Suman
    Edited by: Arun Varadarajan on Feb 11, 2009 12:58 PM

    Hi.......
    Go to RSA1 >> Business content >> Click on Object Types >> There click on Infocube >> Expand the node >> Click on Select Objects.............there search for the Term COPA...........u will get all the standard COPA infocubes.......
    Check this.......
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
    http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
    Regards,
    Debjani....

  • Using Non BI database as source to Build SSAS cubes and SSRS reports .

    hi,
    I have a requirement where I have to use existing database(OLTP) as my source to the SSAS cubes and then to build the reports.
    Where for Cubes and Reports I uses SQL Server BI edition. But my existing source data will be in non BI database.
    My questions are
    1) Can I create Fact and Dimension Model in Non BI Db and connect the same to SSAS and SSRS? What you suggest?
    2) Can I use cubes and reports without modifying the existing OLTP DB structure to fact and Dimension? 
    Thanks
    Naveen

    hi,
    I have a requirement where I have to use existing database(OLTP) as my source to the SSAS cubes and then to build the reports.
    Where for Cubes and Reports I uses SQL Server BI edition. But my existing source data will be in non BI database.
    My questions are
    1) Can I create Fact and Dimension Model in Non BI Db and connect the same to SSAS and SSRS? What you suggest?
    2) Can I use cubes and reports without modifying the existing OLTP DB structure to fact and Dimension? 
    Thanks
    Naveen
    1. Yes. you can
    It doesnt necessary need to set up a OLAP system. However making design inline with OLAP would be easier to implement in SSAS
    2. Again yes
    But using OLTP designed tables in SSAS/SSRS would require some additional overheads at querying level like referenced lookups in SSAS vs lots of joins in backend queries in SSRS.
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Report to display (actuals data from one cube and plan from another)

    Hi Gurus,
             I have a requirement in reporting to display actual data from one cube and plan data from a different one.
            The example below might give a clear picture of the requirement.
    rows has key figures and columns = months
    Jan |  Feb |  Mar |  Apr |  May |  Jun  ...   ....
    GrossSales
    Net Sales   
    Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
    Similarly when i run the report next month(may), 
    then (data for Jan, Feb, Mar, Apr  from CUBE1)
    and ( May thru Dec from CUBE2)
    Any suggestions.
    Thanks in Advance
    Kumar

    Hi Henry,
         We alreadey have a multi provider which includes
    FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
    So you suggest that we have two versions of key figure for actual and plan.
    ie. each KF will have two versions.
    actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
    Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
    eg:
    Jan | Feb | Mar | Apr | May | Jun ...
    GrossSales(Act)
    GrossSlaes(Plan)
    Net Sales(Acutal)
    Net Sales(Plan)
    Correct me if I am wrong.
    the report has a lot of key figures, having two versions for each kf will be confusing.
    the user would like to see
    Jan.....| ...Feb  |..Mar |..Apr.....|  May  | 
    GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
    Net Sales
    where Act.Value is from CUBE1
             Plan Value is from CUBE2
    Thanks
    Kumar

  • Standard report which gives Record count of ODS, Cube and Source system.

    Hi-
    Is there any standard report which gives the record count of ODS, Cube and Source system?
    or
    If any one has ABAP program which takes care of record count pls let me know.
    Thanks in advance

    I don't understand. You need to check the data loads. What for do you want a list of ODS, Cubes and sources systems?
    You can use messages from process chains to monitor the data loads.
    You can also use an abap program inside teh process chains to save data into a table and then an abap report to see if everything went OK.
    But, thinking again, you may be able to use BW statistics to get some of the information you need. Check the help for BW statistics, it might give you an idea of what you can do.
    Regards,
    Diego

  • Report with data that is present in cube and not in ODS from a multiprovide

    Hi Friends,
    I have a multiprovider with one cube and one ODS. I have a requirement to create a exception report. This exception report should have records that are present in cube but not in ODS. If cube has a record which is present in both infoproviders then report should not display that.
    I hope I am clear on my question.
    Thanks and regards,
    Balaraj

    Thanks Timur,
    But this is going to give me all the data present in that selected cube. I want to the report to display data only if it is present in cube but not in ODS.
    ODS data
    Material............Component...........Amount
    10001.................30001................100
    10001.................30002................200
    Cube Data
    Material....................Amount
    10001.......................100
    20002.......................200
    My report should display
    Material................Amount
    20002...................200
    It should not display 10001 as it is present in ODS.
    I hope I am clear this time.
    Thanks and regards,
    Balaraj

  • How the data is fetched from the cube for reporting - with and without BIA

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
    Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
    Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
    Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi,
    yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
    What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
    Regards,
    Jens

  • ODS, Inventory cube, and WM- Trying to run a report but not working! Help

    Hi Gurus,
    Hope somebody can help me here....
    I have an Inventory Cube and an ODS on Material Plant and another on Warehouse Management. For my reports I need fields from three of them so I created a Multi Provider by using these. But I have only Material and Plant as common in three of them, which is used in defining the Multi Provider. Along with these I have used some more characteristics which are not common. So now when I run a query on this MP, I am getting a display wherein the common characteristics get the values that are correct but for uncommon chars the values for the kfs from other data targets become blank and an additional row comes too.
    For example, I have kfs like Blocked stock in the cube and in one of the ODS I have kfs like standard price. So, in the query for the char material group which comes from the ODS there are no values for Blocked stock, I mean I can see a row wherein there is a value for Blocked stock and a blank for Standard Price,  in the additional row there is a blank for Blocked stock and a value for Standard price. This is the case with all the other kfs of different info providers.
    Is it because they are not common in all the info providers? Is there anyway to solve this? RRI will not work as I need the KFs from both the info providers.
    I am stuck now with this problem, so any guidence would be a BIG help.
    Thanks

    Is it because they are not common in all the info providers?
    -->Yes
    Is there anyway to solve this?
    --> Yes and no. If there is a join condition between the ODSs that you can use to get the fields on the same row, you can do an infoset.
    --> To achieve something like an outer join, you can create RKF for your base KFs, and restrict them on uncommon chars with 'constant selection'. This may not work in all cases. Search for a blog by Prakash Darzi on 'Constant selection' to understand this.
    If logically there doesn't exist a relation (try to visualise how you will derive your output row if you were given these two in a file or spreadsheet - is there a logical link to connect the two sets of data?) you cannot expect the results that you look for.

  • Crystal Report - Cube and OLAP concept

    Hi,
    could anyone please provide the good url for to learn Crystal Report - Cube and OLAP concept.

    Moved to OLAP forum

  • BW BCS cube(0bcs_vc10 ) Report huge performance issue

    Hi Masters,
    I am working out for a solution for BW report developed in 0bcs_vc10 virtual cube.
    Some of the querys is taking more 15 to 20 minutes to execute the report.
    This is huge performance issue. We are using BW 3.5, and report devloped in bex and published thru portal. Any one faced similar problem please advise how you tackle this issue. Please give the detail analysis approach how you resolved this issue.
    Current service pack we are using is
    SAP_BW 350 0016 SAPKW35016
    FINBASIS 300 0012 SAPK-30012INFINBASIS
    BI_CONT 353 0008 SAPKIBIFP8
    SEM-BW 400 0012 SAPKGS4012
    Best of Luck
    Chris
    BW BCS cube(0bcs_vc10 ) Report huge performance issue

    Ravi,
    I already did that, it is not helping me much for the performance. Reports are taking 15 t0 20 minutes. I wanted any body in this forum have the same issue how
    they resolved it.
    Regards,
    Chris

  • Copy data models and reports from BW 3.1 to NW 2004s

    Hi experts,
    Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
    Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
    Thank you very much in advance.

    Hi Frank,
    Sounds like a cross version transport is needed.
    This is a solution we have used to do what you want to do:-
    Create and release a transport as per normal.
    Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
    Basis help is needed here.
    From here onwards using stms_import should help you in the normal manner.
    Works a treat.
    Have transported the following all correctly appearing as 3.x data models in NW2004s.
    DSO objects.
    Cubes
    Transfer/Update rules
    Reports.
    Cheers,
    Pom

  • Regarding Info cube and DSO

    Hi,
    Generally reporting will be done on Info Cube rather than DSO.
    Suppose If we assign the same data source to Info Cube and DSO then both contains the same data.
    Info cube have additive and aggregated functionality where DSO have the overwrite functionality .
    Are we using cube for this functionality only ?
    What about the Dimensions in Cube how they differ from data fields and key fields in DSO when we are developing same Bex Report on both ?
    Please advice me .
    Thanks in advance.
    Thanks & Regards,
    Ramnaresh.p

    It is hard to compare Cube and DSO.
    Both thier own usage.
    1. InfoCube is always additive, while DSO supports overwrite functionality.
    2. In InfoCube, combination of all the characteristic value is a Key in the Fact Table, while in ODS, you can specify your own Key Fields based on which you want to generate unique record in the DSO.
    3. DSO supports many delta modes like D, R, N, X, after image, before image, while cube does not support all the modes. You can not delete the record based on the key from the cube by just loading the data. While DSO automaitcally deletes the record from active table and generates the reverse entry for Cube.
    4. DSO is a flat structure and therefore, it is used to store information at detail level, while cube is used to store information at aggregated level.
    So both the structures are very much different from each other. One can replace other at some places, but both the objects have thier own functionality.
    - Danny

Maybe you are looking for