Standard Idoc and Report

Hi Friends-
Can anybody share with me the list of Standard Inbound Idocs and the standard Reports / FM to upload HR infotype.
pls make note that this is inbound and not outbound
Points will be there for sure .
Regards
Meeta

Hello,
These are some of the IDoc Type which are used in HR Module.
HRMASTER02
HRMD_A07
HRMD_ABA05
HRMD_B04
HRMD_WFM
HROTIN
HROT_BRM
HROT_CAP
HROT_USTP
Thanks and Regards,
Venkat Phani Prasad Konduri

Similar Messages

BI 7.0. Standard cubes and reports for SD, MM, FI, CO, PP, PM

Hi All,
I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
I tried searching but no avail
<removed by moderator>
Thanks in Advance
Nathan
Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM

Can you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps.

Difference between Report Template "Standard (PPR)" and "Standard"?

What is the difference between Report Template "Standard (PPR)" and Report Template "Standard"? What does PPR mean and what makes it different? Why would you use PPR rather than just standard?
Thanks,
Linda

Hello,
PPR (Partial Page Refresh) is just a term used to describe some AJAX pagination and sorting functionality, it's just a holdover from before the term AJAX existed.
You can just change the template and on your report to enable that functionality. In 3.0 it will just be on off switch in your pagination options.
Carl
Message was edited by:
Carl Backstrom

How to trigger automatically an IDOC and RFC from SAP R/3 system?

Hi ,
lets say if we are implementing IDOC to FILE &RFC to FILE scenario ,how can we trigger on timely basis(schedules)
1)standard IDOCs and BAPIs?
2)customized Idocs and Customized Bapis?
3)Master Idocs and transactiona Idocs?I think we need to use change pointers for master Idocs and donno about Transactional Idocs.
please explain ,
thank you very much for your help.
regards,
Babu

sorryfor the late reply, I was busy with my work.thank you for your posts.
so all of you say just run the RSEOUT00 no matter what interface we use in XI like Master ,transactional Idocs,standard or customized BAPIs?
And I think we use RSNASTED if we have on recieving side right?
<b>then when we would use a report of format below to trigger an RFC,is this format for Asunc RFC ?</b>
REPORT Z_SEND_DATA_TO_XI.
parameters: dest like rfcdes-rfcdest default '(RFC Destination you defined in SM59)'.
<<your other variable declaration and ABAP Code here>>
call function 'ZXI_SEND_DATA'
in background task
destination dest
exporting
Name = John
City = Smith. (The values to pass to XI)
commit work.
<<Any Write statements or sy-subrc statements here>>
6) Save and Activate your ABAP program.
6) After all these steps, execute your ABAP Program to send the data to file via XI.

Idoc and message type not getting replicated in the receiver system

Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys B

Hi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens

How to find the Standard Program associated with a Standard IDOC

Hi,
I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

Hi,
For outbound IDoc the program can be found:
1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
For Inbound IDoc the program can be found:
Via WE42 where inbound process and its related inbound function module is maintained.
In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
For extending IDoc look at the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
It can be summarized as follows:
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
Hope this helps.
Regards,
Gajendra.

Are Forms and Reports used in eBusiness Suite?

I am new to eBusiness Suite. I have a myth about whether eBusiness Suite is all written by Oracle Forms and Reports. If yes, are these Forms and Reports source code supplied to the customer for customisation?
Any help is welcome.

Hi,
The EBusiness Suite combination of forms/reports/jsp.
the forms/reports are module specific. Each module having its own forms and reports. With standard installation of Ebusiness suite you will get standard forms and reports. on demand requirement the reports/forms will change in display.
the binary forms with extention of .fmb,
reports with extention of .rdf
regards,
phani.k

Idocs and BAPIs

Hello,
Could you tell me please what are the standard Idocs and Standard Bapis available.
If possible could you tell me why do we use those standard Idocs and Bapis.
Thank you

Hi Jyotsna,
BAPI:
http://help.sap.com/saphelp_nw04/helpdata/en/3e/ecf226942511d2ad4b080009b0fb56/frameset.htm
or
Standard BAPI:
Look at the Transaction BAPI.
T-code: BAPI
Go to the T-Code se37 -
Type BAP* then click F4.
You can find the Standard IDOC's on T- Code in : WE60
check the below link for the list of idocs
http://www.erpgenie.com/sapedi/idoc_interface.htm
Thanks,
Satya Kumar
Reward points if it is useful.
Edited by: SATYA KUMAR AKKARABOYANA on Apr 17, 2008 2:28 PM

Std Idocs and Std BAPI

Hello,
Could you tell me please what are the availabel standard Idocs and Standard Bapis available.
If possible could you tell me why do we use those standard Idocs and Bapis.
Thank you

Hello Jyotsna,
BAPI:
http://help.sap.com/saphelp_nw04/helpdata/en/3e/ecf226942511d2ad4b080009b0fb56/frameset.htm
or
Standard BAPI:
Look at the Transaction BAPI.
T-code: BAPI
Go to the T-Code se37 -
Type BAP* then click F4.
You can find the Standard IDOC's on T- Code in : WE60
check the below link for the list of idocs
http://www.erpgenie.com/sapedi/idoc_interface.htm
Thanks,
Satya
Reward points if it is useful

Report displaying Material Standard Price and PO Price

Hello Experts
We have materials which are purchased. Price control is maintained as standard price and standard price is maintained using T Code MR21 periodically.
Due to this when PO price is different from standard price maintained in material master (usually PO price is higher than standard price) all price difference are posted to price difference GL at the time of GR.
Now users want to check variations between standard price and PO price for the material receipts.
Can anyone suggest me any report which provides details of standard price and PO price for the material receipts?
Thanks in advance for your help.
Satya Alapati

Nothing std I'm aware of either. You could consider using the messages 06 205/6/7 to get a warning at the time POs are created that price varies significantly from std.
Config help text below:
Set Tolerance Limits for Price Variance
In this step, you define the tolerance limits for price variances.
When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
Standard settings
The standard SAP System supplied contains the following tolerance keys:
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
SE Maximum cash discount deduction, Purchasing
Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
Note
You can specify whether the system message appears as a warning or error message using the menu options Environment -> Define Attributes of System Messages.
Activities
Maintain the tolerance limits for each tolerance key per company code.
Regards,
Nick

Standard Report Headings, JAVA script usage,and Report field fixed width

My company has purchased Crystal Reports 2008 and I'm in the process of determining if the product will do everything we need and not become a maintenance nitemare.
We would like to setup some standard report headings to be used in all reports. I've setup on already as a SUBREPORT and it works fine. We pass optional parameters that may be blank.
We have several questions:
1) Subreport...Once a SUBREPORT is setup as a standard heading and included in multiple reports, we are concerned about what is required if the standard heading subreport changes. Will each report that uses this need to be opened or handled in any way to pickup the subreport changes? Any suggestions how to handle this?
2) Subreport....In order to get the "PAGE N of M" to work in the subreport we've setup the subreport to accept parameters that are passed from the main report and this works fine. But this requires every report using the standard heading to setup the parameters in order to work. Is there any other way that would minimize the setup needed for a standard heading?
3) JAVA... Can we call a Javascript function? If so, any hints/tips on how/where to do this?
4) Standard Report... Creating the report is difficult with guessing the width to define to the field. Is there a way that the report can know and display the exact size of the field being used? A fixed field defininiton of some sort would make it MUCH easier in the layout of the report.
5) Standard Report...We are currently testing with a stored procedure for the SQL query result data but because of the application we will need to build the query dynamically for every report. Is there a way to bind the data and specify the field lengths?
6) Standard Report...When using a defined file structure I needed to add another field. At the time it seemed like I had to start from scratch as the fields that were on the report were now gone. Is there a update method that can be done import the changes and not loose existing fields on a report?
That all for now. Sorry there are so many questions. We are trying to clear up as many issues as we can before starting the 100+ reports needed.
Thanks in advance.

Hi Vitaly Izmaylov,
I've taken your advice and split out questions 2-6 into seperate questions. Anyone else please respond only to question 1 here.
I see the Re-Import subreport option....and I guess I can only assume that this means that any change to a report heading file (subreport) must be manually re-imported into every report it is used in. There are no behind the scenes files or table that maintain a usage of these reports and can automate the population of the changes.
I was hoping that maybe the subreports would be accessed when called for an pickup any new changes. So if I create 100 reports with standard heading subreport, I would need to manually open and re-import that file in each report to update a report heading change.
Does not sound real fun.
Is all this true?
Thanks,
Tim

Source of xslt mapping and XSD/ XMT target structures for standard Idocs

Hi,
I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
Thank you in advance.
Anand More.

Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
For some help on XSLT mapping check the following threads,
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
Also have a look at my code samples,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
cheers
Sameer

Accu. Debit and Accu. Credit in Standard Trial Balance Report

Hi experts,
I would like to ask for help about the definition of the column Accu. Debit and Accu. Credit in the standard trial balance report.
Previously, I thought it were columns to display the total debit and total credit start from the system go-live to the end period I selected in the report selection criteria. However, in my testing, it seems only included the transaction of the fiscal year of the end of period I selected in the report selection criteria. e.g. If I selected 01.Jan.2009 - 31.Dec.2010, Accu. Debit and Accu. Credit will only display the sum of transaction made in 2010.
In the selection criteria, I selected "Account Balance" and "Annual Report", and unchecked all other selection criteria.
Environment: 8.81 PL06
Please help. Thanks so much.
James
Edited by: JaWang on Jan 10, 2012 3:47 AM
Edited by: JaWang on Jan 10, 2012 4:07 AM

Hi James,
The Accu. Debit and Accu. Credit in Standard Trial Balance Report can only be calculated through the current report. They have no relation with your initial balance in previous period.
Thanks,
Gordon

Standard Idoc or BAPI to trasfer the routes and stages data

Hi guys,
We want to transfer the routes and stages data from one SAP system to other SAP system . can u suggest any standard idocs or BAPIs to do the job.
thanks
sankar
Edited by: sudhakar murthy on Apr 1, 2009 10:18 AM

hello guys
any idea on this????
thanks

Standard Portal activity report configuration and Universal worklist config

Hi,
I need help for follwong topics:
Standard Portal activity report configuration and Universal worklist configuration.
Thanks & Regards
Sushama Pandey

Hi
Check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/904ca240-63bc-2a10-1c98-de81b6a045bf

Standard Idoc and Report

Similar Messages

Maybe you are looking for