BI 7 New Business Content

Dear Team,
If anybody having list of new business content available in BI7(2004S) for MM, PP, SD and FICO please send me to [email protected]
Best Regards,
SG

Hello SG,
Check out the following:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/90/d4f33b949b6b31e10000000a11402f/frameset.htm">For SD</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm">Different areas in SCM</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/28/3dc7393b26da1de10000000a114084/frameset.htm">Finance and Controlling</a>
Hope this helps.
Sumit

Similar Messages

Reg General Ledger Accounting(New) Business content

Hi,
I would like to know if we can migrate the standard queries based on 0FIGL_C01 and base the queries on 0FIGL_C10. Also, is it advisable to migrate the queries based on 0FIGL_VC1 and 0FIGL_VC2, to be based on 0FIGL_C10.
any pointers to the same, would be helpful.
Regards,
Sainath

Its good to use the queries based on the infocubes standard content to be used rather than migration.
Also the OLD and NEW gl depends on the R/3 config ,if they have configured the NEW GL then use 0FIGL_C10 and if they used the old use the other infocube.
https://forums.sdn.sap.com/click.jspa?searchID=8503376&messageID=2817362
Hope it Helps
Chetan
@CP..

Datasources in 3.X in a new BI 7.0 Business Content Activation

Hi all,
When Installing Business Content for a BI 7.0 Installation, some objects like Datasources, Transfer Rules and Communication structures are activated under 3.X format.
Is there a way to install all Business Content in 7.X format, different from a migration process (which is a manual process)?
Does this extractors (3.X) have any performance issues in case of use them exactly as they are delivered from Business Content?
Best Regards
Jaime Benavides.

Thanks all for your answers.
I understand that a migration process can be executed to old 3.X datasources, but this is a manual process.
My point here is that the activation of a brand new business content of an Instalation NW 7.01 enhancement package 1 and with a Bussines Content Release = BI Content Add-On 4 SP 03 have some elements (datasources) in 7x Version (transformations and DTP´s) and some others in the old 3.x version (transfer Rules and communication structure).
In the moment of ACTIVATING the Business Content, there is not an option to migrate, but the standard Business Content delivered for this scenario is sometimes 7x, and sometimes 3x (i.e. CO_OM_CCA extractors).
I need some documentation to point that, besides some best practices of regular UPGRADES, the STANDARD deliver of a business content of this scenario contains both 7X Datasources and 3X Datasources.
Thanks a lot for all for any additional ideas.
Best Regards,
Jaime Benavides.

Business Content Activation of business partner

Hi,
I am activating standard business partner from business content.The business partner we have right now is of version 3.3/01 and has lot of custom fields. When I am activating the version 3.5/03 I want to make sure I don't lose those custom attributes and also want to know how this will impact the cubes,ODS,Infosets,Update rules,Transfer rules, queries etc associated with this InfoObject. Can anyone please help me out with this issue.
Also while trying to simulate installation of an InfoObject,it ends up with red light. It gives me a message that one of the attributes in the latest version is a navigational attribute and the older version it was a display attribute.Hence while simulating I check both the install and match/copy box so that I can transfer the selections without having to make it navigational but end up with the red light. Is it advisable that I go ahead with installation or how should I go above it.
Thanks,
Kal

Kal,
when you activate the new version , the version is changed from M to A and the new business content would become the active state...
But then since the old BPartner IOBJ is being used in ODS.. cubes etc , I am not sure if your Business COntent installation can proceed since there is master data as well as the same being used across BW.
You could try a merge instead to see if he new fields as part of the new business content is carried over.
Hope it helps.
Arun
Assign points if useful

Business content 3.30: Datasources not available for installation

Hello,
we have recently upgraded our business content from 3.10 to 3.30 in order to get new business content (e.g. datasource 2LIS_13_VDKON - billing item pricing conditions).
Although the upgrade was successful, the new datasources cannot be found in the Administration Workbench/ Business Content in order to install them.
Is there something more we should be doing after the upgrade, in order to be able to see the new Business content as available for installation?
Thanks in advance,
Pavlos

Palvos,
You can not find the datasources in Admin workbench. Datasources can be found in R/3.
Login to your R/3 system. Go to RSA5. Expand all. Search for your datasource. Click on "Transfer Datasources" icon on tha tab. This installs your datasources on R/3 system.
Once the installation is complete, login to BW, go to RSA1, "Source Systems" tab, select your source system and 'replicate datasource' by right clicking on it.
You can install corresponding Infosource from "business content" tab in BW.
Hope it solves your problem
Gova

Installing Business Content directly in QA and PRD or transport it ?

Hello,
We have been running a SAP BW Lanscapce (7.01 SPS7) for over two years.
We have recently applied to our BW Landscace an additional add-on ; SAP SuPM (Sustainability Performance Management 2.0)
Several thousands of new objects are delivered and we need to install the SUPM Business Content.
A specific BC installation procedure is described in the installation guide, use the report report RSO_BC_INSTALL_ALL and not the transaction RSORBCT.
I intended to activate the SUPM Business Content directlly in DEV then QAS then PRD, as we did when we initially installed tthe three systems.
The develpent team would prefer to tranfor the transport the newly installed objects fronm DEV to QAS and PRD. They told me that activating directly the BC in QAS and PRD might cause issue for certain objects like transformations. During activation certain objects receive a unique ID hence receiving a different ID in each system. This would mean that we wonu2019t be able to transport changes to these objects from dev and that each change would need to be applied directly in each system which is not acceptable.
I am not confortable transporting thousands of new objects (even if they are collected in the same transport requests) from DEV to QAS and PRD.
What are you suggestions ? HAve you already been confroncted to the same problem, having to install thousands of new Business Content objects on an existing BW system ?
Thank you for your attention
Best Regards

Hi Shiro,
There is one important thing that you should note down is, if you directly install the contents in production system and something goes wrong due to customization or any other thing then there is risk of recovering it and being production system I would say not to do that.
Where as if you install the contents in development then you will have chance to do the unit testing properly and then send the contents to quality and prod after testing and modifications if required. The risk of failure with transport is very less if the transports are moved in correct sequence.
Regards,
Durgesh.

Business Content Match/Install discrepancy

Hello,
We are to the point where we want to install business content and we already have other active business content. I am looking at two contradictory presentations when it comes to the install and match buttons. 'Installing Business Content' in the SAP Library says 'If the Install indicator is not set, the object is not copied or matched. In this cse, the Match Indicator has no effect.' But, at Tech Ed 2005, in the presentation 'Guidelines for Implementing SAP NetWeaver BI Business Content in a Customer System', Scott Cairncross said that you should never check both the Install and the Match boxes. I've searched here in the forum and multiple times people have been linked to the SAP Library documentation. Can someone verify that if you want to overlay the existing active Business Content, you would check the 'Install' but if you want to merge custom modifications with new business content you would check both the 'Install' and the 'Match' boxes. And checking only the 'Match' box has no effect whatsoever?
I do appreciate all the replies and help given to everyone, I've learned a lot from this forum.
Thanks,
Diane

Hi Diane,
Have you seen this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
. the match indicator is not set and
. the install indicator is set.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
Hope this helps...

Comparing Business Content (D) with Active Content (A)

Hi, I am planning on installing some business content and notice that 0COMP_CODE is automatically marked for install and match.
How can I compare what I have in Active against the new business content to see what is different? Please don't tell me this is not possible...

Hi @ all,
i'm lookin for a way to compare my active BW structures with the existing content which is installed with SP or release update... I even want to see differences in startroutines or changes in transfer rules.
In my scenario, we used the DataSource 0UCCONTRACT_ATTR and the transfer rule from content.
The DataSource and the transfer rule were activated from content in 2003. In 2004, SAP published OSS note (713358) to correct inconsistent data.
But the new code wasn't activated, because we have many custom computations in the transfer rules.
Do you know any way to figure out those differences?
In SAP help, i found the transaction RSBICA (BI content analyzer). Is this the right tool?
Regards,
Philipp

Hi........What is business content..

Hi all,
what is business content ? when this comes into picture in real time....
Thanks & Regards,
Bhaskar Rao Javvaji

Hi..
Business Content is a pre-configured set of role and task-relevant information models based on consistent metadata in the SAP Business Information Warehouse.
Business Content provides selected roles within a company with the information they need to carry out their tasks.
Business Content can
be used in particular industries without being modified
be modified, meaning you can work with it to any degree of detail
serve as a template or an example for customer-defined Business Content
This information model includes integral Roles, Workbooks, Queries, InfoSources, InfoCubes, ODS objects, key figures, characteristics, Update rules, and extractors for SAP R/3, mySAP.com Business Applications, and for other selection applications.
To summarize,
Business Content enables a quick and cost-effective implementation.
Provides a model that can be used as a guideline during implementation using experience gained from other implementations
SAP delivers Business Content in the SAP Delivery Version (D version).
Changes are saved in the M version.
Active Business Content is saved in the A version.
In the Administrator Workbench, one can collect and transfer the Business Content delivered by SAP. In this way, all additional necessary objects are taken into account automatically, as is the sequence for the activation.
SAP delivers the Business Content objects in a new D Version. The customer can compare the new Business Content with his/her active customer version, and either adopt the new version or merge it with his/her version.
Adopt: The customer version is deleted and replaced by the new Business Content version.
Merge: The total is made from both objects and saved as a new customer version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten.
If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if the match indicator is not set and the install indicator is set. In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.

Enterprise Compensatio Management Business Content

Hi,
In my current project, we are going to implement the Enterprise Compensation Managemet business content. Reviewing the different structures available for the reporting, I saw most of the reports have been created on ODS objects or Infosets. I'm concerned about it, from a performance point of view, so it's not possible to optimize them through the use of aggregates (I know the ODS objects can be optimized using secondary indexes, but this cause problems when loading the data). I would like to know the reason why SAP has configured the model this way: if it's a very new business content, and it hasn't been developed completely by SAP, or if there's a good reason for it that I'm missing. One option for us is to create custom cubes, but in this case, we should replicate all the reporting.
Has somebody experience in implementing this module, or has been in a similar situation?
Thanks in advance for your help

Hi David,
At the moment there is no standard business content for SAP Records Management. There is for case management (via SAP CRM objects) but not for SAP RM.
It maybe difficult to build such content because every documentclass (of a record or document) creates it's own tables for storing the metadata and other data (about 16 tables).
Also as mentioned the structure of the record is an XML document so not easy extractable from a table.
Regards,
Tjalling-Jan

New Cubes in Project System Business Content

Hi
I am going through the business Content Help. We have standard Cubes like 0PS_C02 for dates 0PS_C04 for Controlling, 0PS_C07 for Claims and so on
Also I see new cubes 0PS_C021 with different description Dates ( Identification using GUID) and 0PS_C041 FOR Controlling (Identification using GUID) and so on.
My question is what for these new cubes with Description Identification using GUID.
Thanks
Satish

Hi Satish,
I believe the 0PS_C041 , 0PS_C021 are the used when you create projects in R/3 using cProjects or xRPM. When you create a project in cProjects and replicate it, a corresponding project is created in R/3 which is identified by a 24 character String(this is the GUID). And the cubes 0PS_C041, 0PS_C021 in BW.... are used to store such projects information.
Hope this helps!!!
Rajesh.

Activate 0AUBPVEH withOUT new version of 0MATERIAL from Business Content

Hello experts!
I want to activate ODS-Object 0AUBPVEH from Business Content. With this ODS I have to activate InfoObject 0AUVEHICLE which has 0MATERIAL as an attribute. Our experts told me, that it is not really possible to activate the ODS-Object with using our existing 0MATERIAL and without activation of the new version of 0MATERIAL.
Can someone help here?
Thanks,
Peter

We found now another way.
Regards,
Peter

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Business content datasource enhancement

Hi Experts,
I am new to HR.
We are implementing HR modules Personnel development and Personnel administration, while I was looking into business content extractors 0HR_PA_0 and OHR_PA_1, I found that there were only few fields in the extract structure but there were many fields in the cube.Do we need to enhance the datasources? how it works?. If anybody did the enhancement to these datasources, please give me the information with examples.
Anita

No, it is no necesary to enhance standard data sources. Those datasources extract, basically employee and date. Most infoobjects in cube are calculated from 0PERSON and 0EMPLOYEE attributes, having in count the date and employed extracted, because most in HR is time dependent.
Assign point is usefull

SRM Business Content

Hi All,
I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
Thank in Advance
Niren

Hi ,
for all business content, you can start here
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
scm
http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
DataSources
New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
The following graphic shows the data flow from the DataSources to the DataStore objects
Structure
Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
There are two types of extraction: Specific extraction and generic extraction:
Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
Generic and specific extraction
Extraction logic in detail
Data extraction involves the following six function modules:
InitLoad
InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
DeltaLoad
DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
Data Collector
The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
Data Consolidator
The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
Data Normalizer
The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
Data Mapper
During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
The following table shows the technical names of the function modules of the individual DataSources:
Description
0SRM_TD_PO
0SRM_TD_CF
0SRM_TD_IV
0SRM_TD_PO_ACC
InitLoad
BBP_BI_PO_EXTRACT
BBP_BI_CF_EXTRACT
BBP_BI_IV_EXTRACT
BBP_BI_PO_ACC_EXTRACT
Collector
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
Consolidator
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
Denormalizer
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
Mapper
BBP_BI_PO_MAP
BBP_BI_CF_MAP
BBP_BI_IV_MAP
BBP_BI_PO_ACC_MAP
DeltaLoad
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
Hope this helps,
Regards
CSM Reddy

BI 7 New Business Content

Similar Messages

Maybe you are looking for