BI-BPS Missing Functionalities!

Hello Friends,
Does anyone know about release of 10 missing functionality in BI-BPS of SEM-BPS? Like allocations etc. I know that we can do them using FOX or ABAP but want to know if there is any pre-delivered template like in SEM-BPS for allocations?
Thanks in Advance,
Naga Timmaraju.

Few missing things planned
Data entry on (postable) hierarchy nodes and totals(SPS 12)
Budgeting(SPS 13)
Hope it Helps
Chetan
@CP..

Similar Messages

Magic Mouse under Win7 - full functionalities

Dear all,
I don't have a choice - my company runs Win7.
Nevertheless, I don't want to miss my Magic Mouse and my Apple Keyboard that I know from my home devices.
To connect the Mouse with my Dell Nogebook hasn't been a challenge but, I miss functionalities like the move with fingers - so far only right & left (double) clicks work fine.
Can anybody help / advice what to do to obtain full functionalities of my Magic Mouse under Windows 7?
Thanks a lot in advance from Germany!

bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
https://discussions.apple.com/thread/4079148
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp.
Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly.
My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
As soon as I enabled the Windows Wireless Service, the problem came back.
Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Wireless Connection problem using windows in a Mac.

My personal laundry list for the N8.

Notably, the bugs I have experienced thus far are:
1. Inability for Wi-Fi to connect in Offline mode if you have previously gone to Offline mode and said No when activating an app that requires data connection.
2. When you turn on the phone without a SIM card, then hit the Call button, it will stay in an infinite loop in the Dialer screen. It'll ask you to please insert a sim card, followed by either OK or Cancel. So after you insert the SIM card, you hit OK, then it repeats the question. If you hit Cancel, it repeats the question. You can't get out of this infinite cycle other than turning the N8 off.
3. After a hard reset of your phone, the Ovi Social app is missing the widget for the home screen. Yes, you can go to the Nokia Messaging OTA site to get the update, but after 2 hard resets, the installation of the update gives me a "Unable to install" error. Which is a joke, because after the first hard reset it worked wonderfully. And it never worked for me subsequently.
4. Even after defining a WLAN destination, if you don't have a SIM card, you can't configure any mail other Mail for Exchange. Yes, the new Mail app tries to use mail routed through Nokia, but at least give me the option to create mailboxes using old traditional direct IMAP or POP3.
5. With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a music, which will force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I tried my old N97 and N95, it worked as expected! But not the N8.
6. Sometimes after a hard reset, even when I respond with selecting my country/city and entering my time, the phone will start with the UK time zone instead. The UTC time is correct, but for the wrong time zone. Why does it do that?!?
7. 60% of the time when I turn on the phone (even when it was Normal mode during the previous shut down), I do not get the classic Nokia tone when the iconic handshake video plays. This is your brand recognition! Something so valuable that it's impossible to put a dollar value on it. And you botch that up?!?
List of the reduced functionalities:
1. In previous generations of Mail app, if an email contains what appears to be a phone number, Symbian will make it clickable so that you can call the number. Not so with Mail app in S^3.
2. In previous versions of Messaging app, if I receive a SMS, I can either click on the call button (no longer exists in the N8) or Options > Call to call the sender of the SMS automatically. Now, with S^3, the Call option is no longer in Options. Makes it really hard to call the SMS sender back while you're driving.
3. In the previous generations of Mail app, I can call up the Listen option when I'm either in a Mailbox or have the email open, and it will read the email. Now, this functionality only exists on the Messaging app, not Mail app.
4. If you open up the Message Reader app, it will be able to playback all your SMS, MMS, Mail mailbox's messages. Great, right? But in order to listen to an email, you must first go through all the SMS messages first before it will play back any emails. So if you have 20 SMSs, you have to click on the FFw button 20 times before you get to listen to your email. Truly a brilliant design, whoever came up with that.
5. In the previous Symbian web browsers, when I hit the Back button, I can either go back/forward using the left/right gestures, and selecting a page by tapping the page. I also have the option of hitting the left or right arrows right above the soft keys and hitting Select (left soft key) or Cancel/Stop (right soft key). In the N8, everything but the Select key is there. Now it's replaced by a blank?!? If you want to force me to use gestures and taps, then at least do me a favor and remove the left/right arrows on the screen. (Surprisingly, if I invoke the web browser using the YouTube "app", the Select soft key appears during back/forward navigation. Hmmm...)
List of improvement suggestions:
1. Whenever you're in a screen that has a tiny left/right arrow (such as reading an SMS message, or looking at your Messaging Inbox, allow me to swipe left or right to go to the previous/next message or folder. This functionality already exists in the Calendar app. So why stop there? Not only that, but extend it to Settings menu! Why should gestures be limited to up and down, except for the Calendar application that allows left/right?
2. Allow landscape dialer, like the N97.
3. Uhm, what happened to the Converter application? It has been a staple of all Nokia phones, and suddenly it's missing from the flagship phone? Nokia's comeback phone?!?
4. A much simpler VPN application? Look at what Apple did in just a little over a year. A simple process of logging into Cisco VPN. What's Nokia's way, after having VPN solution for years and years? Still a mess.
5. Previously, connectivity settings were easier to get to with the N91, N95 and N97. Now, I have A) Menu > Options > Settings > Connectivity > Wi-Fi, and B) Menu > Options > Settings > Connectivity > Settings > Switch to Wi-Fi? I can work around it as a power user. What about those people who make up the biggest market share of iPhone users who are not technologically savvy? And do you see the irony with Settings buried within Settings menu?
6. Port all functionalities of PC Suite to Ovi Suite, and fix all the bugs in Ovi Suite. The latest 3.0.0.271 still has bugs and missing functionalities. Open back up the dual code development pipelines (PC Suite and Ovi Suite) to the N8 until all core functionalites are successfully brought over to Ovi Suite.
Nokia, I hope this thread captures your attention within the developers and management. Thank you.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

Status update after installing PR 1.1 version 013.016 for product code 059DV2 on 2011.02.20, plus new bug reports after testing and using PR 1.1 extensively for 44 days. I thought I needed to put in this status update before installing PR 1.2, which became available on 2011.04.03 for my market.
1. Inability for Wi-Fi to connect in Offline mode if you have previously gone to Offline mode and said No when activating an app that requires data connection. Status as of PR 1.1: Semi-fixed. After installing PR 1.1, when you're in Offline mode and you use an App that required Internet connection and subsequently say No when asked if you want to allow WiFi in Offline mode, it will still prompt you later on. But this is semi-fixed because sometimes, when the N8 is in Offline mode and you try to access an app that needs Internet connection, the question "Allow Wi-Fi connections during this offline period?" doesn't even bother to prompt you, other than "Conn. Unavailable" in the upper left corner of the screen. What da?!?
2. When you turn on the phone without a SIM card, then hit the Call button, it will stay in an infinite loop in the Dialer screen. It'll ask you to please insert a sim card, followed by either OK or Cancel. So after you insert the SIM card, you hit OK, then it repeats the question. If you hit Cancel, it repeats the question. You can't get out of this infinite cycle other than turning the N8 off. Status as of PR 1.1: Fixed.
3. After a hard reset of your phone, the Ovi Social app is missing the widget for the home screen. Yes, you can go to the Nokia Messaging OTA site to get the update, but after 2 hard resets, the installation of the update gives me a "Unable to install" error. Which is a joke, because after the first hard reset it worked wonderfully. And it never worked for me subsequently. Status as of PR 1.1: Unknown. Have not tried to do a hard reset, but now that Social is on 1.3, I'm sure the installer file now includes the widget. But I also heard that the latest beta version of 1.3 (as of this writing) may require an uninstallation of older versions of Social first, otherwise it may fail. Other reports indicate Social no longer works after the update. Follow the discussion in betalabs.nokia.com for the Social 1.3 app.
4. Even after defining a WLAN destination, if you don't have a SIM card, you can't configure any mail other Mail for Exchange. Yes, the new Mail app tries to use mail routed through Nokia, but at least give me the option to create mailboxes using old traditional direct IMAP or POP3. Status as of PR 1.1: Still unfixed. No SIM card, no ability to define a new mailbox other than Mail for Exchange. You absolutely must have SIM card. Why?!?
5. With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a music, which will force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I tried my old N97 and N95, it worked as expected! But not the N8. Status as of PR 1.1: Still broken. I won't be able to test this out with PR 1.2, since I ripped out Nokia CK-100 and installed CK-600. I've never used the N97 with CK-600, so I don't know if the A2DP connection is automatic or not, but with N8 PR 1.1 and either CK-100 or CK-600, the A2DP connection is still NOT automatic.
6. Sometimes after a hard reset, even when I respond with selecting my country/city and entering my time, the phone will start with the UK time zone instead. The UTC time is correct, but for the wrong time zone. Why does it do that?!? Status as of PR 1.1: Unknown. I've only done 1 hard reset since upgrading to PR 1.1, and it didn't misbehave. But during PR 1.0, the behavior wasn't constant, but half the time.
7. 60% of the time when I turn on the phone (even when it was Normal mode during the previous shut down), I do not get the classic Nokia tone when the iconic handshake video plays. This is your brand recognition! Something so valuable that it's impossible to put a dollar value on it. And you botch that up?!? Status as of PR 1.1: Still a problem. Now, it seems like 90% of the time when I turn on the N8, the Nokia tone doesn't play during the hand shake.
8. [New bug in PR 1.1] Light time-out: I never had a problem with this in N8 PR 1.0, but only started noticing this in PR 1.1. When you have a browser up and running, and you leave the N8 alone, like no movement or screen activity such as leaving it on a table, the screen doesn't black out after the allotted time setting in Settings > Phone > Display > Light time-out. It will go dim, but the screensaver never kicks in. This happens 75% of the time, and is quite annoying. This behavior seems to manifest itself when you're in an app that requires Internet connection, such as the browser or email application.
9. [New bug in PR 1.1 or possibly in PR 1.0 as well] Apps dependent on operator even on unlocked and unsubsidized Nokia phones: I am not sure if this is a new problem with PR 1.1 or existed in PR 1.0, but it appears that some apps like Social, Email and Ovi Maps are dependent on operator permissions, even if the device is unsubsidized and purchased unlocked. I don't know if this is a problem with PR 1.0 because when I traveled from 2011.02.25 to 2011.03.10, I already upgraded my N8 to PR 1.1. But basically, after I popped in a pre-paid SIM card at another country, starting Social and trying to log in will tell me something along the lines of checking with the operator and then telling me I cannot use Social. (I traveled to China.) But I could kind of work around it by exiting, then tapping the Social widget. Sometimes hitting refresh will somehow allow me to get Facebook updates in China, and sometimes it will tell me Service Unavailable. Likewise with Ovi Maps. When I was back home in the USA, I had many other online services, like Time Out, Lonely Planet, Trip Advisor, etc. But once I popped in a Chinese SIM card and go online with the operator (3G or Edge), all my online services disappeared, and replaced with Chinese services which was totally useless as my USA N8 cannot render Chinese characters. Mind you, I did not connect to 3G or Edge for a few days, so during those few days when I was just using WiFi, I was still able to look up things in English in Trip Advisor, such as nearby restaurants or hotels. But as soon as I connected online via SIM operator network, features started disappearing. Same with email behavior. No SIM inserted, can't configure new email mailboxes. No SIM card, Social displays "Service is not available" even if I have WiFi AP connected. The important question here is, why are unlocked and unsubsidized S^3 phones even checking with the operator if I can run whatever services?
List of the reduced functionalities:
1. In previous generations of Mail app, if an email contains what appears to be a phone number, Symbian will make it clickable so that you can call the number. Not so with Mail app in S^3. Status as of PR 1.1: Still a problem.
2. In previous versions of Messaging app, if I receive a SMS, I can either click on the call button (no longer exists in the N8) or Options > Call to call the sender of the SMS automatically. Now, with S^3, the Call option is no longer in Options. Makes it really hard to call the SMS sender back while you're driving. Status as of PR 1.1: Still a problem.
3. In the previous generations of Mail app, I can call up the Listen option when I'm either in a Mailbox or have the email open, and it will read the email. Now, this functionality only exists on the Messaging app, not Mail app. Status as of PR 1.1: Still a problem.
4. If you open up the Message Reader app, it will be able to playback all your SMS, MMS, Mail mailbox's messages. Great, right? But in order to listen to an email, you must first go through all the SMS messages first before it will play back any emails. So if you have 20 SMSs, you have to click on the FFw button 20 times before you get to listen to your email. Truly a brilliant design, whoever came up with that. Status as of PR 1.1: Still a problem.
5. In the previous Symbian web browsers, when I hit the Back button, I can either go back/forward using the left/right gestures, and selecting a page by tapping the page. I also have the option of hitting the left or right arrows right above the soft keys and hitting Select (left soft key) or Cancel/Stop (right soft key). In the N8, everything but the Select key is there. Now it's replaced by a blank?!? If you want to force me to use gestures and taps, then at least do me a favor and remove the left/right arrows on the screen. (Surprisingly, if I invoke the web browser using the YouTube "app", the Select soft key appears during back/forward navigation. Hmmm...) Status as of PR 1.1: Still a problem.
6. [New reduction of functionality in PR 1.1] This is truly a new one for Nokia - Breathing Light Notification: In the N8 PR 1.1, when you go to Settings > Phone > Notification lights > Notification light > Events notified, you can now enable/disable 2 events: "Missed call" and "New message". But in PR 1.0, you had a third choice: "New email". Uhm... **bleep**?!? Why would Nokia remove a notification event type?!? Is the business justification that nobody cared enough about the breathing light that having some extra lines of code for notification of new emails would be a waste of precious firmware C:\ drive space?!?
7. No ability to specify which drive to use for Mailbox repository: In the previous iterations of Symbian, I could tell the mailbox which drive to use, the C:\ drive or the mass storage or even the memory card. Now, that flexibility is gone. Why is this a problem? Recently, I was sending a bunch of emails with big attachments, and suddenly, I was notified that C: drive was running out of memory! What do you know? The Sent mail is stored in C:\ drive! That's real smart, considering real estate in C:\ drive is already little to begin with.
List of improvement suggestions:
1. Whenever you're in a screen that has a tiny left/right arrow (such as reading an SMS message, or looking at your Messaging Inbox, allow me to swipe left or right to go to the previous/next message or folder. This functionality already exists in the Calendar app. So why stop there? Not only that, but extend it to Settings menu! Why should gestures be limited to up and down, except for the Calendar application that allows left/right? Status as of PR 1.1: Nokia is still ignoring me on this one.
2. Allow landscape dialer, like the N97. Status as of PR 1.1: Added! Kudos!
3. Uhm, what happened to the Converter application? It has been a staple of all Nokia phones, and suddenly it's missing from the flagship phone? Nokia's comeback phone?!? Status as of PR 1.1: Nokia is still ignoring me on this one.
4. A much simpler VPN application? Look at what Apple did in just a little over a year. A simple process of logging into Cisco VPN. What's Nokia's way, after having VPN solution for years and years? Still a mess. Status as of PR 1.1: Nokia is still ignoring me on this one.
5. Previously, connectivity settings were easier to get to with the N91, N95 and N97. Now, I have A) Menu > Options > Settings > Connectivity > Wi-Fi, and B) Menu > Options > Settings > Connectivity > Settings > Switch to Wi-Fi? I can work around it as a power user. What about those people who make up the biggest market share of iPhone users who are not technologically savvy? And do you see the irony with Settings buried within Settings menu? Status as of PR 1.1: Nokia is still ignoring me on this one.
6. Port all functionalities of PC Suite to Ovi Suite, and fix all the bugs in Ovi Suite. The latest 3.0.0.271 still has bugs and missing functionalities. Open back up the dual code development pipelines (PC Suite and Ovi Suite) to the N8 until all core functionalites are successfully brought over to Ovi Suite. Status as of PR 1.1: Technically this isn't a problem with the firmware on the N8 but rather a problem with PC Suite in disallowing N8 connectivity. Anybody wants to give me an update on the latest version of PC Suite 7.1.5X.X? Since the Nokia "Download software" support site no longer has a link to PC Suite but just Ovi Suite, I suspect PC Suite will never be opened up for N8.
Nokia, I hope this thread captures your attention within the developers and management. Thank you.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

Reporting tools and SAP BW

Dear Sirs,
We have Business Objects BI 4.0 and SAP BW 7.3.
Actually we are using Web Intelligence and BEx Query to reporting.
We have not Business Layer (Universe) between BW and BO because BO it's not supported to create universe (unx) on BW. So we create document in WEBI using BEx Query.
We want to use Xcelsius (Dashboard Design) 2011 and I was thinking that we can use query from universe to connect with BW (new functionality in version 2011). Can we? Or maybe we should to connect to BW using "Connecttion to SAP BW"?
We want to use Explorer (on iPad and iPhone), but Explorer requires universe (unx).
Is not possible to create universe (unx, because unv is not supported via Explorer) based on SAP BW, is it true?
We should we do, when we want to use Explorer with SAP BW?
Do I understand connection between reporting tools and SAP BW:
Crystal Reports - can I use cubes or BEx queries
Xcelsius - using "Connection to SAP BW"
WEBI - BExqueries or universe (but only UNV - old version).
Explorer - in my opinion is not possible
Analysis for OLAP - drirect to cube in SAP BW
Could you please comment.

Hi
With the current version of the BI 4.0 SP2 BI Platform, one cannot create a universe (.UNX format) against BW using the OLAP connection. However you can create a universe (.UNX format) using the Relational connection (see OSS note: 1656905 - How to create UNX universe based on Business Warehourse InfoCubes). One limitation is the use of hierarchies with the relational connection.
Then you can create the Information spaces based on the universe (.UNX format) that the Explorer can use.
BO Reporting tools:
1. Crystal Reports for Enterprise = you can use the OLAP connection (BICS) directly against the BW InfoCubes or Queries, if queries already exist in the BW system then you can leverage these directly (less time spent recreating the entire query in Crystal)
2. Xcelsius = you can use the BICS or Web Service or Universe to access the data
3. Web Intelligence = you can use the OLAP Connection (BICS)
4. Explorer = you can use a universe (.UNX format) via a Relational Connection
5. Analysis for OLAP = you can use the OLAP connection (BICS) to either a query or InfoCube.
It is hoped that in Feature Pack 3 which will be released later this year, that missing functionalities will be delivered for BI 4.0.
Regards
Derek

Print button on my webdynpro JAVA page

Hi Experts,
Is there any way that I can include a print button on my webdynpro JAVA page. ON click of the Print button I have to print the entire Page. User is able to print the page by using the print option of Browser, but in that case if the page is having a vertical or horizontal scroll, print output will contain only the visible part.
Thanks and Regards,
Sarath Satheesan

Hi Sarath,
Printing Web Dynpro Java (WDJ) applications is one of the missing functionalities that everyone wants to have in their application. you can use third party open source reporting tool, JasperReports, to solve this issue
Printing in Web Dynpro using JasperReports
PART 1 - /people/jawed.ali/blog/2009/02/09/part-i-print-web-dynpro-java-applications-using-jasperreports
PART 2 - /people/jawed.ali/blog/2009/02/09/part-i-print-web-dynpro-java-applications-using-jasperreports
PART 3 - /people/jawed.ali/blog/2009/10/30/part-iii-print-web-dynpro-java-applications-using-jasperreports
Hope this will fulfil you requiremnt.
Thanks
Arun

R173 Release: February 28th 2011

We are announcing a new Business Catalyst release, scheduled to go live on Tuesday, February 28th.
The R173 release comes with an updated DNS infrastructure (hardware and software) for better performance and reliability, updated web form interface for improved usability and several bug fixes.
Updated DNS Infrastructure
With this release we are going to replace the existing DNS infrastructure with a completely new solution (hardware and software) that aims to fix many of the DNS problems you've found while using Business Catalyst, greatly increase performance when resolving domains and support higher loads for new site creation.
For a smoother migration path, the new solution will be switched on a day after the release, on March 1st.
Updated Web Forms
We have updated the Edit Web Form user interface to simplify the discovery and usability for web form settings. Starting with R174, we've added a more visible Edit Properties button and updated the Web Form Properties dialog:
Related to web forms, the Reports > Web Form Usage menu entry in Admin Console will be shown only if the user has View Reports permission and at least a form is created on the site.
Issues fixed by R173 release
Issue 3106414 - Fixed a bug preventing users to update Credit Card details for a recurrent payment created with SagePay payment gateway
Issue 3107053 - The Secure Zone Report Summary window does not log the login event
Issue 3109864 - Updated the message displayed when accessing Admin -> Manage Domains user interface for a trial site
Issue 3110882 - Fixed a bug causing passwords to be incorrectly updated with '******' when site customer are updating their details using the Update Customer form
Issue 2930622 - Fixed a bug generating a JavaScript error when opening web form builder
Issue 2930642 - Fixed a bug causing special characters in web forms drop down lists to break the new web form builder
system_visitorDeviceClass and visitor.device will return the detected device even if multiscreen templates are disabled
Improved delivery rate for weekly system reports
Known issues
Site Settings -> Site Map menu entry in Admin Console is displayed to all users having Edit pages permission and cannot be hidden. For the next few months, users who don't need Sitemap should ignore this menu entry.
Business Catalyst V3 beta updates
Added Copy Campaign button in the Email Campaign wizard on Stats and Preview and Send screens.
Added the Export report button in Secure zone usage report screen
Added a confirmation message after a successful customer deletion
Fixed a bug causing the Download Import Template button within Web App to open a blank page
Added a confirmation message after successfully deleting multiple cases/orders
Fixed a bug causing an incorrect CSS style usage on V3 after page reload when using Internet Explorer 8
Added a Preview button in edit announcement screen
Updated Site Settings>Billing Settings user interface to add 3 missing functionalities: Upgrade Site Plan, Upgrade Credit Card and Cancel Site
Fixed a bug on Internet Explorer 9 preventing users from editing web app settings
Fixed a bug on Chrome causing the instant search results to be displayed over the search box in CRM>Search user interface
Fixed a bug causing Preview page to open the Admin V3 user interface instead of the site page
Fixed a bug preventing users from accessing Module Manager in Admin V3
Fixed a bug on Internet Explorer causing a redirect to an empty frame instead of a redirect to Web Form Detail page after closing any popup from Site manager -> Web Forms interface
Update Edit Page screen to move Page Name field in the top and have the URL and Page Title fields auto-completed based on Page Name value
Heads-up: upcoming changes in the next release
We'd like to give you a heads-up with upcoming changes in the following release, without setting anything in stone though.
User Interface V3 will become default for new users
Starting with our next release (March 2012), all new users will have access by default to the Business Catalyst V3 user interface, but will be able to switch to the current user interface. The change will affect all user types (Partners and Customers) and all sites (existing and new).
New names and module tags for Announcements, Literature and Bookings
To improve consistency across the new Admin, the Announcements, Literature and Bookings modules, their corresponding tags and user interfaces will be renamed. Existing tags and modules will continue to work as today, but users will no longer be able to insert them through module manager going forward. For each modules, the following name changes will occur:
Announcements will become News and the following tags and modules will be replaced:
{module_announcement} will become {module_news}
{tag_announcementurl_value} will be replaced by {tag_newsurl_value}
{tag_announcementid} will be replaced by {tag_newsid}
{tag_eventfromdate} will become {tag_newsfromdate}
{tag_eventtodate} will become {tag_newstodate}
Bookings will become Events and the following tags and modules will be replaced:
{module_booking} will become {module_events}
{tag_bookingday} will become {tag_eventday}
{tag_bookingmonth} will become {tag_eventmonth}
{tag_bookingyear} will become {tag_eventyear}
Literature will become Media Downloads and the following module will be replaced: {module_literature} will become {module_mediadownloads}
Updated user management interfaces
To simplify the user and email accounts management workflows, we're going to update their corresponding user interfaces in the next releases. Going forward, we will separate the admin user accounts from email accounts management and start using an invitation workflow for user and email accounts creation.
Besides the change of workflow itself, this update completely changes the way we are thinking about the platform and represents the first step into the Business Catalyst future. The user and email accounts user interfaces rely on REST APIs and backbone.js to completely separate the UI from the application login and provide more development flexibility and increased performance. Going forward, every interface we'll touch will be built on this infrastructure and will allow us to publish APIs which partners can use to extend or tweak the platform.
Note: by separating email and admin accounts user interfaces, you will no longer be able to create users that don't have access to admin and email. Existing user accounts that don’t have email and admin access will continue to live on the system, but they will not be visible or editable in the new interfaces. We recommend you to use the current user interface to transition these accounts into either email or admin accounts.
SEO options will be enabled out-of-the-box
Site Settings -> SEO menu entry in Admin Console will be removed. The options available now are:
SEO friendly URLs for eCommerce, Announcements, Web Apps -- these will be enabled for all sites by default and cannot be turned off
Enable partial URL matching for SEO friendly URLs -- this option will be deprecated. Existing sites will keep the current setting but able to switch it off using a special interface
Enable sitemap.xml for search engines -- this will remain as is for existing sites, and always enabled for new sites
Note that trial sites will not be indexed by search engines. Should you want to disable search engine indexing after upgrade, please use a custom robots.txt file or upload an empty sitemap.xml.
If you'd like to use a custom sitemap.xml file, simply upload it to your site. If this file exists, it will be served instead of the BC-generated sitemap.xml.
Related to SEO, Enhanced 301 Redirects is being delayed for a few months.
Dropping support for Internet Explorer 7 and Firefox 4 or below
Starting March 20th, we will discontinue support for Internet Explorer 7 or lower and Firefox 4 or below. In order to continue using Business Catalyst Admin user interface without problems, you and your clients need to upgrade to a more recent browser:
Download Internet Explorer
Download Safari
Download Chrome
Download Firefox
Thank you,
Cristinel Anastasoaie
Adobe Business Catalyst Product Manager

Congratulations to all this week's winners of the BOTB and to the top kudoes authors as well!

How I got the .4181 OS finally installed and running stable

Hi folks,
after a very long night shift, I am "proud" to announce that my Z10 is now running stable in 4181 without any missing functionalities. (even phone calls seem to work properly :-) )
Interested in how I got there, then just read on:
IMPORTANT:
If not already done, BACKUP ALL DATA on Your Z10 device, You´ll surely need this Backup! :-)
After the everlasting security wipe, which I tried to interrupt several times, by pulling the battery (and the SIM) out, it finally stopped and showed me the connect to PC icon on the screen of the Z10.
So I connected my Z10 and restored the factory FW using the BlackBerry Link Software, WITHOUT having the SIM inserted.
After the first initial setup, I looked for SW Updates, but (and of course) none was presented, due to the missing SIM, so I continued to do some basic setups and "testing" the bare system. All went fine.
After that, I reinserted my SIM, powered the Z10 up and tried to copy the previous backup back onto the Z10, which was (another of course and obviously) not possible, due to mismatching SW-Releases.
So with the SIM inserted, connected to a WiFi and my mobile carrier, I once again checked for updates and voila, .4181 was available, this time having 359MB.
(--> BlackBerry just seems to provide the "basic emergency" OS, all further updates and releases are distributed through Your individual mobile carrier)
I initiated that download, went to bed to get at least a few hours of sleep and when I woke up, I did, what the display on the Z10 wanted: Restart the device.
The then following boot sequence was fast and smooth, reaching the 100% in just under two minutes, no freeze, no hangers, no being stuck.
There I had my bare device on which I could copy my previously carried out backup again in no time!
Of course I had to reenter the some passwords and the SMS were gone, but looking at the last days, I think this is the biggest progress of it all ;-))
THIS is how I did it. Of course I know that I defied against some of the most important rules and therefore I can and will not give You any guarantees that this "solution" will work unlimited, but considering my high level of frustration and how angry I was, these measures seemed legit to me and I can tell, they just worked fine! ;-)
the steps in summary:
- Backup all Data
- do a Security Swipe
- extract SIM
- reset to factory presets using BlackBerry Link
- re insert SIM
- look for provider updates
- install
- copy previous backup to device
- don´t worry
- be happy
PS: Don´t panic, if it takes longer or if nothing seems to happen. What I burnt mostly the last days, where minutes, hours and days
Thumbs up and fingers crossed. I hope this might help You aswell!
If it does, feel free to like this "solution" :-)
Paddy

Sorry for not being detailed enough.
I have Vista: Ultimate 32 bit edition. Everything works the stereo the 5. surround sound but the main things I did notice is that alot of the options like the crystalizer and various options wouldn't save. They would definately work just when I went into creative console to adjust some more they all went back to the default settings even though they worked and were changed earlier.
Whilst playing Call of Duty 2 it wouldn't use the EAX, I haven't tried other games . I would recommend staying with XP as of right now if you have uninstalled Vista and wait for proper drivers , there is no guarantee the way I installed or explained how to fix will work for you. Just as others before have gotten things to work with different steps to install they did not work for you, so mine not work for you. If you still have Vista installed then why not give my simple step a shot in my first post.

"SQL Developer" vs. "SQL Developer Data Modeler"

Hi Everybody!
I'm using SQL Developer and I miss functionalities like re-engeneering of ER Models. As far as I know this is what the "SQL Developer Data Modeler" does. So my question is: Is the "SQL Developer Data Modeler" a complete replacement for "SQL Developer" or do I need both?
thank you in advance

Whoooops, sorry, I replied in the wrong thread -.-
My reply was meant to be in the thread about Designer EA2 and the non-versioned repository import (Import repository from Designer concerning non-versioned applications (EA2)

Advanced Analysis MS Office: Not able to authenticate

Hi All,
I am using BO 4.0 Analysis, Edition MS Office for reporting. We have version 1.1 installed on the client machine. When I try to launch Analysis Excel on my system, it brings up the BOBJ authentication screen. Even after giving all the details, the OK option is greyed out.
If I select Skip (BOBJ authentication), it brings up the BW system and from here I can work without any problem. Its only the first step where the OK option is greyed out and not able to do anything except to skip that option.
Has anyone come across this issue ? I don't think it is a problem with the version of Business Objects as we are on the latest version.
Please help !
Thanks,
Prasad

Hi Daniel,
The Analysis Office BIP Add-On is quite new. It was recently released with AO 1.4 SP4, so there are some "missing functionalities" that are already on the backlog for future releases. As a workaround, you can use the CMC's Instance Manager to check the executed jobs.
You can refer to the chapter 10 of the "User Guide for AO" for more information and details regarding the scheduling functionality. You can download the User Guide by visiting the link below:
http://help.sap.com/businessobject/product_guides/AMS14/en/14SP6_aaoffice_user_en.pdf
Regards,
Filipe

Ios7: adding albums to playlists

When making a playlist in Music in former iOS's if you went to your albums button there used to be an "add all" button to add an album and now it's not there so if you want to add two 15 song albums to a playlist that's 30 careful clicks (to get correct album sequence) versus the former 2. I'm just wondering if they'd hid this option with some kind of swipe that I'm missing or if it was just removed.

I'm a big user of this function. The function just dissapear. I reported it 2 times without success as we can see.
Whole new UI (really cool, beautiful), but Apple forgot to implement the useful things behind it. Don't worry, it will be back in iOS 8.
Yeah, today I answer to several question. The answer is always: nope, Apple forgot it. They are aware, but just don't care. Really annoying. iOS 7 has many missing functionalities that I often use. I never wanted to go see somewhere else than today. What really get on my nerves is that I sure that we will have to wait until iOS8.
I really hope that my slightly aggresive answers will make Apple to think about the problem and change their way to make us wait month or even years for some partial bug fix.

Adding albums to playlists

I can't seem to add an album to a playlist. The playlist help screen says to select and hold the on the album name but nothing happens, no flash like when you add a song. What am I missing?
Mike

I'm a big user of this function. The function just dissapear. I reported it 2 times without success as we can see.
Whole new UI (really cool, beautiful), but Apple forgot to implement the useful things behind it. Don't worry, it will be back in iOS 8.
Yeah, today I answer to several question. The answer is always: nope, Apple forgot it. They are aware, but just don't care. Really annoying. iOS 7 has many missing functionalities that I often use. I never wanted to go see somewhere else than today. What really get on my nerves is that I sure that we will have to wait until iOS8.
I really hope that my slightly aggresive answers will make Apple to think about the problem and change their way to make us wait month or even years for some partial bug fix.

Adobe Reader X installation issue

Adobe Reader X installation caused me a very strange, unusual problem. My OS is Win XP SP3 and I have already installed Adobe Acrobat v.9.4.5.
The installation process went fine, but when my system had to be restarted after the installation at the domain login the system requested me to change my password, because of the expiring. It was very strange, because the PW has been changed 2 weeks before regarding the official 3 months period rule. I did the change now again, but after that I could not reach anyway a https web site (with certificate) and additionally has been destroyed my predefined signature in the Adobe Acrobat.
Well, after a longer wrestling with my system I could restore the missed functionalities (I had to remove the Reader too for this). However later I needed again the Reader for a test purpose and after the new installation exactly the same problem happend as above I described!
Has someone faced with any similar case?
BR: Dzsenix

Thanks for the info. Maybe that would be nice to build into the Reader and/or Acrobat a function to check any existing installed Adobe versions on the PC and warn the user if there would be any incompatibility issue during the installation of a new Adobe product. Many no-name programs can do that............ The great Adobe no would be able to do that???????

Check key press or keyboard-UI mapping?

HI all,
Is there any event handler in web dynpro that I can check what key user pressed?
Or is there any way that I can map a function key to a button, say press "F1" equals to press "Add" button of my user web dynpro view?
THanks,
Kelvin

Hi Kelvin,
Webdynpro java has some missing functionalities if you want some functionalities to be added to it in future take look at this thread...
POLL: Web Dynpro UI elements - enhancement proposals
Hope it helps you.
Regards,
Maheswaran.B

X-Fi2 - no Tags are updated on resync? Is it really true?

Hi,
I already posted a thread considering the star rating - but another even more shocking Issue appeared:
The X-Fi2 doesn't update Tags if you re-sync?
I tried under XP/Win7 with Creative Central, WMP, Media Monkey... no matter what kind of synchronisation I do, the tags are not updated. f.E:
You sync your files to your device. Then you change the Genre, or the Interpret in your library. If you perform a sync now, none of your tags/files are updated on the zen...can that be true? :-(
Whats the use of syncing then - You have to re-copy the entire file any time you change a tag=?
I loved my X-Fi and bought the 2 because I thought it will be an improvement. :-(
But there seem to be no proper way to sync the X-Fi2, or am I'm doing something wrong?
Looking really forward to any answers or suggestions,
thanks!
melbe

Hi melbe
I'm also puzzeled why the X-Fi2 isn't MTP anymore, but I must say that I prefer this as a Mass Storage Class device, because it also works on older computers that don't have WMP 0, so I can use it anywhere as a regular USBstick.
But, I agree with you that it's a drawback for the whole syncing story (which is just simply copying files now).
And yeah, player-only star-rating is kind of pointless.. I also read somewhere that those ratings will all be deleted when you upgrade the firmware (I thought it was on ABi, but I can't find it anymore..), which suggests that the ratings are stored somewhere on the player and not in the tags. I guess that as a result, the player doesn't do anything with the ratings from the tags.. But yeah this cripples the whole idea of star-rating songs..
Well the X-Fi2 has some new features like RSS, apps, more options on the audio enhancements, but on the other hand the wireless features are gone, it uses another protocol, and I also thought that the X-Fi2 is a little cheaper than the X-Fi. So overall I think it's just a different player, and they should have given it another name instead of just adding the "2".
I think it could be changed, because there are some Creative players that are upgradable to become MTP players (Touch, Xtra and Micro. link).
I'm actually quite happy with this player as it is now, I like the simplicity of using it as a MSC device. And well, I don't use the star-rating and I also don't like automated processes editing my files (I'd rather do this myself ), but?I have seen more people on this forum that were disappointed by the missing functionalities due to this change, so hopefully Creative will consider such an optional upgrade for the X-Fi2 as well.

IBook ***** as iBook app as you can not make notes unless you convert to ePub. No thanks

What is it with some app. With really missing basic functionalities. is it to provide space for Evernote and Notability to fill in the missing functionalities of iBooks. Half baked solutions from apple, sorry to say.

Let them know you want this feature via
http://www.apple.com/feedback

BI-BPS Missing Functionalities!

Similar Messages

Maybe you are looking for