BI Composer install in OBIEE 11.1.1.6 (windows 32 bit)
Hi, I'm trying to test out the BI composer functionality in 11.1.1.6 on my laptop. After following the installation instructions, I'm no longer able to log in to OBIEE at all - start getting 404 errors.
Has anyone gotten BI Composer to work on 11.1.1.6?
Thanks,
Scott
Hi Scott,
Yes, I have got it working. High level steps that I followed for this were
1. Stopped all BI services.
2. Extended BI domain with the oracle.bicomposer_template_11.1.1.jar template by invoking the config wizard in wlserver_10.3\common\bin.
The documentation had some issues through in this step as It says to skip some screens like 'Configure JDBC Data sources'. I noticed that the screens were populating wrong values and there were validation errors also when I try to skip it without correcting. So I had to correct these details before I went ahead.
3. Modifying the instanceconfig.xml to add the tag
<BIComposer>
<Enabled>true</Enabled>
</BIComposer>
4. Starting all the services .
5. Changing the preferences through MyAccount to use BIComposer instead of Editor.
Thank you,
Dhar
Similar Messages
-
RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003
Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein -
Error installing MaxDB 7.6.03.09 on windows 32 bit on NW70 SR2 sapinst
MaxDB experts,
Hello. I am trying to install SAP NW70SR2 (JAVA AS) on MaxDB 7.6.03.09 with windows 32 bit OS. Brand new install, JAVA AS central system.
Our problem is in the SAPINST phase:
Install database server software
I see this in the sapinst.log file:
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
ERROR 2009-04-09 16:19:41 [iaxxinscbk.cpp:282]
abortInstallation
MDB-07020 The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
And this is in the bottom of the sdbinst.log file
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
The sdbinst.log has lots of other interesting info:
This is the top of the file:
Installation of MaxDB
+ ***********************+
starting installation Th, Apr 09, 2009 at 16:18:56
operating system: Windows I386 NT 5.1 Service Pack 3
callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
starting preparing phase of package Base 7.6.03.09 32 bit
getInstalledReleasesWin(): wrong version format
checking interferences to other packages... ok
I'm not sure why there is a version info problem.
This is a windows PC I'm trying to put this on. It's 32 bit so that is why I had to get the SR2 DVDs. The SR3 DVD won't let you install via 32 bit OS.
I downloaded all the software from OSS marketplace and some from our delivered DVDs:
We have these DVDs
32 BIT BS_2005_SR2_SAP_Installation_Master 51033208
32 BIT NW_7.0_SR2_Kernel_WINDOWS__LNX_X86 51033262
NW 7.0 SR2 SAP Installation Export 51032246
NW 7.0 SR2 SP09 Java based SW Comp 51032257
I pulled this down off the marketplace (in the NW70SR3 area)
32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10
I've searched all through OSS/SDN for someone who has this same issue. All our other systems are AIX/oracle so trouble-shooting MaxDB is completely new to me.
Can anyone point me into the right direction to get this figured out? I'm tried just re-running the install, same error. And removing the c:/sapdb/programs, no good.
Thanks!
NickNatalia,
Here is the entire Install log for MaxDB. Also remember that this was called as part of an SAP system install:
MaxDBServer_install-10.04.2009-10.05.log
INSTALLER_INFO: Version = 7.6.03 Build 009-123-163-622
INSTALLER_INFO: Changelist = 163622
INSTALLER_INFO: MakeId = 267230
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = DGW58J1L
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 3
CALL: SDBINST -indep_prog C:\sapdb\programs -indep_data C:\sapdb\data -depend C:\sapdb\CEL\db -profile Server -b
STDOUT:
Installation of MaxDB
STDOUT: ***********************
STDOUT: starting installation Fr, Apr 10, 2009 at 10:04:43
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 3
STDOUT: callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
STDOUT: installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT: archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
STDOUT:
starting preparing phase of package Base 7.6.03.09 32 bit
STDOUT: -
MSG: service "sql6" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: service "sapdbni72" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: InstallRegistry: space check ok: 127249572 kb on C: (156288320 kb total) available
MSG: install registry successfully locked
MSG: read 12 PACKAGES
MSG: net registry size = 121301 bytes
MSG: InstallRegistry: reserved 1024 kb disk space
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent data path: c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
STDOUT:
package Base successfully checked
STDOUT:
starting preparing phase of package SQLDBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package SQLDBC 76 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC76.TGZ"
STDOUT:
package SQLDBC 76 successfully checked
STDOUT:
starting preparing phase of package Fastload API 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: fastload path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
STDOUT:
package Fastload API successfully checked
STDOUT:
starting preparing phase of package PCR 7104 7.1.04.45
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
STDOUT:
package PCR 7104 successfully checked
STDOUT:
starting preparing phase of package PCR 7300 7.3.00.59
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7300 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
STDOUT:
package PCR 7300 successfully checked
STDOUT:
starting preparing phase of package PCR 7301 7.3.01.22
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7301 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
STDOUT:
package PCR 7301 successfully checked
STDOUT:
starting preparing phase of package PCR 7403 7.4.03.49 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7403 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
STDOUT:
package PCR 7403 successfully checked
STDOUT:
starting preparing phase of package PCR 7500 7.5.00.46 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7500 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
STDOUT:
package PCR 7500 successfully checked
STDOUT:
starting preparing phase of package SAP Utilities 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: : c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
STDOUT:
package SAP Utilities successfully checked
STDOUT:
starting preparing phase of package DB Analyzer 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package JDBC 7.6.03.03
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Server Utilities 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Database Kernel 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dependent path: c:/sapdb/cel/db
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
STDOUT:
package Database Kernel successfully checked
STDOUT:
starting preparing phase of package Redist Python 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Loader 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Messages MSG 0.5603
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package ODBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT: checking filesystem "C:"... free disk space ok
MSG: available = 127248680 kb
MSG: needed = 339145 kb
STDOUT:
starting installation phase of package Base 7.6.03.09 32 bit
STDOUT: -
STDERR: ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
STDERR: installation exited abnormally at Fr, Apr 10, 2009 at 10:05:29MSG: packagedata of package SQLDBC not changed
MSG: packagedata of package DB Analyzer not changed
MSG: packagedata of package JDBC not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Redist Python not changed
MSG: packagedata of package Loader not changed
MSG: packagedata of package Messages not changed
MSG: packagedata of package ODBC not changed
MSG: writing 12 packages
MSG: net install registry size = 121301 bytes
MSG: wrote install registry (141250 bytes)
MSG: install registry successfully unlocked -
Hi Guys,
Can any one installed installing ofm_soa_generic_11.1.1.6.0_disk1_1of2 on XP 32 bit . If installed means plz help me.
Regards,
VenkatPl do not post duplicates - soa installation on XP 32 bit
-
How to Install em12c (12.1.0.3) on windows 64 bit
Hi Guys,
I am trying to install 12 c 12.1.0.3 on windows 2008 R2 server. The server has met the all prerequisites. But when I am trying to launch the installer it will disappear immediately without any error message. I check the installation log file there is no error about anything:
LOGFILE:
Using paramFile: D:\temp\12cCloud\em12103_winx64_disk1\oms\Disk1\install\oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 3422 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Any idea why it is happening ?
Regards,Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install libskgxn plugins response stage WT.zip
jdk oms runInstaller wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM ( for windows it will be orInstaller.err and log )
Since there is nothing in logs, opening an Sr will help us to have a web conference with you and identify the issue. -
How to install EBS 11.5.10.2 on windows 2008 Server
Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications. -
Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64
Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit. -
How To Install Multiple OBIEE Instances On One Linux Machine
Hi,
OS: Red Hat ES 5.2
OBIEE : 10.1.3.4
We one development server(Linux) where one OBIEE 10.1.3.4 was installed with os user as 'ora1a' (Deployed on Oracle Application Server 10.1.3.4)
and now I have installed OBIEE 10.1.3.4 on same Linux Server with different user(ora2b) and different mount point (Deployed on Another Oracle Application Server 10.1.3.4 )
But My OBIEE was not working and I came to know that only one can be working by default.
After following few notes i have update NQSConfig.inc and odbc.ini with different ports ie from 9704 to 9725 and bounced BI server and presentation server
But still its not working can any one tell me what are all needs to update to make it work
Thanks in advance
Regards,
Bhanu Chander
Reference's i used: HOW TO: Install Multiple OBIEE Instances On One UNIX Machine (Doc ID 605582.1)Hi
I was not much clear about what you are telling
See my first OBIEE instance URL is http://hostname18.oracle.com:7777/analytics (As i deployed OBIEE on Application server 10g(OAS1))
and second one is http://hostname18.oracle.com:7778/analytics (As i deployed OBIEE on another Application server 10g(OAS2))
Also My port for first OBIEE instance is 9704 and second one is 9725(Which i changed to this)
Now tell me what are all i should update
Thanks,
Bhanu Chander -
How do I know what Opatch has been installed on OBIEE 11.1.1.6.2?
Hi,
I started working with new client and someone does obiee upgrade to 11.1.1.6.2. now users got some issue and we identified that issue can be resolved if we apply a patch and to apply that patch it is saying please make sure you have installed pre requisite patch with some number. how do I know what Opatch has been installed on OBIEE 11.1.1.6.2?
any command or file available?
Edited by: JV123 on Feb 14, 2013 2:48 PMCheck this
http://www.cool-bi.com/CMDline/DeterminingCurrentPatchLevels.php
If helps mark -
De-install the obiee 11g in lunix
hi experts,
Actually there are n number of problems in my software installation, i thougt of re-installing the obiee 11g agian in liunux.
can any one suggest what are the steps that i need to follow to deinstall?
i have gone through the oracle doc for deinstallation : http://download.oracle.com/docs/cd/E14571_01/bi.1111/e16518.pdf
but when i tried to ./runInstaller -deinstall
according to document it says that i will lunch the window to follow the further steps, but i dont see any window prompting me to de-install
normally in windows iam able to see the window to deinstall the software. but not in the linux.
what way do i need to lunch the window in linux to deinstall? please suggest me. thanks
i am new to the linux environment. i am using the putty to lunch my linux command prompt.
Thanks,
Mani.hi
here is the error that i am facing when reinstalling the obiee 11g in lunix:
[m /home/Middleware/bihome/Oracle_BI1/oui/bin ]$ ./runInstaller -deinstall
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 871 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] n
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /home/Middleware/oraInventory/logs/installActions2011-06-20_03-05-50PM.log
[m/home/Middleware/bihome/Oracle_BI1/oui/bin ]$ echo $DISPLAY
19x.x.xxx.xx:0.0
please some one help me to sort out this problem. -
Fail installing OBIEE 11g on Oracle Linux 5 64 bits
Hello,
I am trying to install OBIEE 11g over Oracle Linux 5 (64 bits), but I can't. I have the following issue:
INST-07008: Validation of Oracle Home location failed. User does not have permission to create home/instance location
INST-07282: Specified Middleware home location does not exist
In the Oracle Middleware Home, I have specified "/root/Oracle/Middleware".
I have following these steps:
1) Install Oracle DB 11g R2 (OK)
2) Install jdk for Linux 64 bits (OK)
3) Install weblogic
I have done the installation as "root" user
Middleware Home Directory = /root/oracle/Middleware (OK)
4) Install RCU as root (OK)
5) Install OBI 11g
To execute ./runInstaller it is necessary be as oracle user.
I have changed permissions in /root/Oracle/Middleware (chmod 777), but the issue is the same.
I appreciate any idea to solve the issue.
Thank you in advance.
Regards,
Monica.Hello,
no, I have installed OBIEE as oracle user with software only option, with root isn't possible.
So, I don't know if it is necessary I installed WebLogic as oracle user to have permission in middleware path...
Regards. -
Hello,
I did install the OBIEE 11g in a server with Windows 2003 32-bits SP2.
When the installation was finishing this message appeared: "opmnctl start coreapplication_obips1 failed". And the installation was finished with this error only.
Now when I try sign in on OBIEE this message appears: "An error occurred during authentication. Try again later or contact your system administrator", but in the EM I can see this errors:
Jan 31, PM 11:46:44 PM BRST AdminServer SEVERE: Element Type: BI_INSTANCE, Element Id: coreapplication, Operation Result: FAILED_TO_START, Detail Message: Error in starting one or more components of BI Instance; Please check the server log files for detailed message.
Jan 31, PM 11:46:23 PM BRST OracleBIClusterControllerComponent [71071] An attempt to establish a connection with Oracle BI Scheduler BI11:9705 (monitor port 9708) failed.
Jan 31, PM 11:46:18 PM BRST AdminServer MBean failed
Jan 31, PM 11:46:03 PM BRST OracleBISchedulerComponent [nQSError: 46066] Operation cancelled.
Jan 31, PM 11:46:02 PM BRST OracleBIServerComponent [nQSError: 46066] Operation cancelled
Anyone have idea about this issue?
Thank you,
MaurícioAnybody could help me, please?
Thanks
Maurício -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
I ca not install Itunes 10.5 on vista or windows 7 my iPhone 4 is much slower and freezes and also certain apps and also certain features will not work on the phone now that I cannot update it to ios5. When I go to the store they turn me away with my laptops and tell me to buy there computer that's the only answer. I know there has to be away around it? I am also up for a new upgrade on my second phone line and was going to get a 4s but now I am thinking it may be the wrong choice I am very unhappy with Apple right now...
WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.
-
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
In J1IIN the excise invoice type is not getting changed to BOND for Export
Hi Experts, In ECC 6.0 I am trying to create an Excise Invoice (Export) but the system in J1IIN is not allowing me to change Excise invoice type to Bond (deemed is reflecting in Blue), some more details are as follows: The Customer is for Country Ind
-
IPod Video 30gb - seen in windows, not in updater or iTunes
Hiya guys, I have recently bought a 30gb iPod. When i connect it to my windows machine - it recognises the iPod in my computer but not in iTunes or iPod updater. I have gone through all the steps suggested on the apple/support section of the website
-
Unable to download OS X using Zapping PRAM index.
Unable to download OS X using Zapping PRAM index. Gives OS X Mavericks failed to download use the purchases page to try again - But cant see Mac app store icon as screen has completely gone grey Since yesterday my Macbook Pro is not working - rather
-
Calculating fractions of hours from time date range
Hello friends, I'm using sql server 2008 r2 and I have a table called attendance with the following fields attendance_no int attendance_date date attendance_timein time(7) attendance_timeout time(7) emp_id int and another table call
-
I'm about to place an order for a mac and im undecided which one 20"imac or 15"mbp . I do photo retouching. as far as portability it does not matter i willl be happy with either. can i get some help. thanx