Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

Similar Messages

Oem 10g grid control agent secure fails with error

When trying to secure the agent from one of the server it fails with the below error. If any one had faced this issue or know of the problem can help.
emctl secure agent password
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetSecPort
Done.
Requesting an Oracle Wallet and Agent Key from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetWallet
Failed.
Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.properties
The Agent has not been secured.

Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.propertiesDid you check that? It seems configuration file 'emd.properties' points to a URL, which cannot be resolved.
Werner

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

OEM 10g Grid Control Problem

Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...

where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3

Installing 10g and Grid control together on Windows Server 2003

Hi all,
I've been having some trouble installing both the Grid Control and Oracle 10g together on a Windows Server 2003 box.
Here's the steps I've followed (if im stepping away from the norm, please tell me.. i REALLY need to do this properly without any hacks.. right now im on a test box.. but soon enough I have to do it in a live production environment and I really need a clean install).
I had a copy of Oracle 9i installed - my databases are pretty small.. 1.5Gb at most and I have been advised to just do an export and import them back in later.. which is fine by me..
I uninstalled Oracle 9i, making sure to check all the environment variables were clear and the registry settings were gone.
I ran the grid control setup
Set Home name = Ora10gGC
Set home path = C:\Oracle\Ora10gGC
I selected Enterprise Manager 10g Grid Control Using a New database 10.1.3.0
I set my passwords, and then set the global database name as emrep (the default)
All the optional configuration assistants ran successfull
Once this was all done and the install was finished, I restarted the server
Then I inserted the Oracle 10g cd
I ran 10g setup
Click Advanced installation
Set home name = Ora10g
Set home path = C:\Oracle\Ora10g
I selected Enterprise edition
Selected General purpose database
I got the following message:
The ORACLE_HOME environment variable is current set. This will prevent proper use of Multiple Oracle Homes and since it is not required for any Oracle products to function, it will be unset in your environment.
I set the global database name on my starter database to STARTER, I selected Use Grid Control for Database Management and set my paths and passwords, then I clicked install.
The install worked up till it tried to create the starter database, then it failed with an ORA-12560 error.
I checked the environment variables and it seems that ORACLE_HOME wasn't unset after all. I deleted it from my environment variables and restarted the server, but I still get the ORA-12560 error when i try to create a new database.
I'd really appreciate it if someone could tell me how to install these 2 products together properly.. Thanks!

I suggest you to read Metalink Note:344537.1 "Installing EM 10g Grid Control Fails to Start the TNSListener Due to Environment Settings"
Additionaly could you post the fragment from alert.log and listener.log files, so more diagnostic information can be provided on this issue.
~ Madrid.

How to setup DISK SPACE alert on OEM 10g Grid Control...

Gurus,
I am trying to setup DISK SPACE notification / alert thru OEM 10g Grid Control, but so far no luck.
Can someone help/guide me on how to achieve this?
Please advice.
Thanks & Regards,
Kartik

Those two links don't say anything about "DISK SPACE ALERT" I already know how to setup notification. I suppose you are talking about Filesystem Space Available (%)
If you need to setup an alert (Notification) then i suppose you need to setup an notification rule.
Yes, these notes do not have the key word "DISK SPACE ALERT" you are looking for, but if you go through the first note CLEARLY and COMPLETELY, you should find your answer.
And he has given an example for Filesystem space available in this note, which is what you are looking for.(I think so)
Say for Disk Space, you create a notification rule for target hosts and have metric "Filesystem Space Available (%)" defined in that rule.
If you aren't talking about notifications and just want to setup an filesystem space available metic, then follow this note:
How To Setup Host Metrics For Filesystem
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=749341.1

Error while installing Oracle 10G Grid control in RHEL

I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
Anjan

I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas

How to figure out server has capacity to install OEM 10 Grid control

How to figure out server has capacity to install OEM 10 Grid control
Hi Experts
I have HP_UX 11.11 server which has 1 instance on it with version 10.2.0.1.0.
Now I would like to install Grid control with a separate instance for repository.
I was told I would need 2 GB Ram for OMS and 2 GB Ram for instance.
Now how do I figure out if my server has enough resources from Ram perspective
Following is output from top and vmstat
1. for top it says 3045556K free , now is this free memory virtual(real +swap) or real?
2. as per top I only have free 3GB(3045556K) , so does that mean I can not have OMS & repository on
this server ?
3. In vmstat I see free memory as 762335
in man it says free - Size of the free list
what does this mean, how much is my free meemory ?
4. For OMS I read - It is a J2EE application that is installed and deployed using Oracle
Application Server
Now when I look at top I see these processes
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Does oasadm user means Oracle application server ? If yes does it mean I will not
need 2GB for OMS ?
cov6817:plmbomdv $ vmstat 2 5
procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
1 0 0 3348627 762335 69 11 0 0 0 0 0 1014 4916 671 12 1 87
1 0 0 3348627 762284 17 0 0 0 0 0 0 1040 10514 886 1 0 99
1 0 0 3330668 762284 10 0 0 0 0 0 0 1031 7820 872 0 0 100
1 0 0 3330668 762284 9 0 0 0 0 0 0 1033 6173 873 0 0 100
1 0 0 3330668 762284 5 0 0 0 0 0 0 1029 5468 891 1 0 98
cov6817:plmbomdv $ top
System: cov6817 Wed Jul 18 08:48:43 2007
Load averages: 0.02, 0.04, 0.03
267 processes: 215 sleeping, 51 running, 1 zombie
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.03 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
1 0.03 0.6% 0.0% 0.4% 99.0% 0.0% 0.0% 0.0% 0.0%
2 0.02 0.6% 0.0% 0.2% 99.2% 0.0% 0.0% 0.0% 0.0%
3 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
avg 0.02 0.4% 0.0% 0.2% 99.4% 0.0% 0.0% 0.0% 0.0%
Memory: 8733312K (7157492K) real, 15353696K (13382776K) virtual, 3045556K free Page# 1/10
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Thanks a lot
New DBA

how much is my free meemory ?Do you have kmeminfo command installed?
4. For OMS I read - It is a J2EE application that is
installed and deployed using Oracle Application Server
s oasadm user means Oracle application server ? If
yes does it mean I will not need 2GB for OMS ?Even if that java vm is an instance of Oracle AS (OC4J), the Grid Control installs a separate instance of AS. The choice to install OMS app to any existing AS home does not exist in any version I know.
Find out what more is running on the box and how much resources (i.e. RAM) those apps are configured with.

Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit

installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
i have installed this but restarting of server making problem
i m not able to start opmn.ctl
what should i do is there any other version to be downloaded
I did.
1. i installed X 86 software as 64 bits is available for itanium only
2. it installed successfully after changing value in orapram.ini
now after reboot of server my opmnctl doesnt come up
what can be the issue?

hi,
1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
2nd..when you use the command opmnctl startall..what errors do you get..
3rd..can you specify the opmn.logs and ons logs
Regards
Fabian

How to recognize if application is installed using "Install Application on Remote Desktop" option on Windows Server 2008 R2

How to recognize if application is installed using "Install application on remote desktop..." option in Control Panel in Windows Server 2008 R2?
Basically, as administrator, I can't say if the user installed application using "Install application on remote desktop..." in Control Panel or he just installed it by clicking the .msi executable. I can't find anything that makes any difference.
I could not find anything in the registry. I am quite confused.
Thanks,
Aleksandar9

Hi,
Thank you for your posting in Windows Server Forum.
Please make sure that you are using category view of control panel-programs to check the application. And in addition to “install application on Remote Desktop server” user can also use command line also.
change user /install
change user /execute
change user /query
“The first time you run the application, it searches the home directory for its .ini files. If the .ini files are not found in the home directory, but are found in the system directory, Terminal Services copies the .ini files to the home directory, ensuring
that each user has a unique copy of the application .ini files. Each user should have a unique copy of the .ini files for an application. This prevents instances where different users might have incompatible application configurations.” (Quoted formthis
article).
Hope it helps!
Thanks,
Dharmesh

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

OEM 10g grid control using an existing database

Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
Jake

Well, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks.

Install EM 10g Grid Control on Solaris 10 x86

Hi all
I need to install Enterprise Manager 10g Grid Control Release 2 on Solaris 10 x86 platform.
I found out the following link where I can download the software:
http://www.oracle.com/technology/software/products/oem/index.html
Howerver it seems that there isn't any download for my platform. Does anybody know where can I find the software?
How can I configure EM Grid Control on that platform if I don't have the software. Does anybody know a manual installation and configuration method?
King regard and thank you
Aron

That means it is not yet available for 10.2, but it is for 10.1

How to know what *.exe is called my notification in OEM 10G Grid Control

Our Port 25 is blocked. and the security does not want to open the port 25 for the machine. He wants to give exact .exe file the permission which executes the email..
Do you guys what exe is called for email notification ?
Thanks
Atul

You can get all the default Grid Control Ports in Metalink Note Note:235298.1 -
Overview of Default Ports Used by EM 10g Grid Control, DB Control and AS Control

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Similar Messages

Maybe you are looking for