BI content - use original or make copies?

Hello All,
I have just installed the admin cockpit business package and am activating the relevent business content for the admin cockpit.
Do I have to make a copy of the standard business content or can I just use the original infoObject, cubes etc. I have no plan to change any of this content.
Thanks,
Nick.

Dear Nick,
For all standard business scenario,you keep your BI content remains unchanged...
For custom defined make a copy of Business content
for making BI content as zcuston defined ie 0 as Z one...
just create a new one..,hile creating make sure you check yes to copy from other and in other give the corresponding BI content name
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

Similar Messages

HT201250 Will using AirPort Utility to "restore to original settings" make you have to re-back up your computer's files on a Time Capsule?

Will using AirPort Utility to "restore to original settings" make you have to re-back up your computer's files on a Time Capsule?

The advantage is CCC has built in routines that "bless" (see the Terminal.app command "bless") the
os x installation so it will boot properly on the new volume it is being installed on.
Disk Utility simply copies (restores) files from one volume to another. Many times this works just fine.
Sometimes it won't boot afterwards. Most of the time (as long as there are no system files missing
or corrupted) a person may "bless" the drive and restore it to working condition.
CCC is not a "magical" application, it is in fact a front end to applications that already exist separately
in OS X (asr, hdiutil, diskutil, bless, etc.).
It doesn't matter to me how you do it. It's your time not mine. Everyone should spend some time
behind the command line in terminal. I do many tasks using the command line, including and not
limited to complete system restores, backing up data, disk partitioning, installing software, disk
repair, permissions repair, ACL management, restoring data, managing disk images, network
management, user management, file management, etc. Many people are fearful of the command
line. I feel just the opposite, I'm fearful without it.
Say Hello to my little friend.
http://manuals.info.apple.com/enUS/Command_Line_Adminv10.5.pdf
http://www.apple.com/downloads/macosx/unixopensource/clix.html
http://www.macobserver.com/tips/macosxcl101/index.html
http://www.matisse.net/OSX/darwin_commands.html
Kj

Is there any way to make copies of the maser image in LR3?

Is there any way to make copies of the maser image in LR3?
I do a lot of sports and dance photography and I need a way to make multiple copies of an image to drag into different folders in LR3.
Example: One dancer may be on several teams and I need to make copies of the team photos to put in each dancers folder before I upload them to my E Commerce site so each dancer see's their team photo with their individual photos in the same folder online.
I know I can make virtual copies, but you cannot drag them to different folders as copies, it will move the virtual with the master.
If they would just let us hold ALT or any key while dragging to "copy" instead of "move", my problem would be solved.
For now I have to go into Windows, make copies ,then synch the folders again. Pain in the rear to do that.
Anyone have any experience here?
Thanks
ronchast

Ron,
I too need to make "Real Copies" of images and hate doing anything directly from the OS because of the chance that my LR catalog gets out of Sync with the actual images on the computer. So I make the copies inside LR with an export routine and then move the copies inside of LR with the normal drag and drop. Once the export preset is created it can be executed from the Library Grid by right-clicking on the image (or selected images) to make the copies. My settings are as follows in case you are interested:
This is the first time I have posted an image before and I am not sure if you will be able to read it or not. The contents from the export preset in the image above are as follows if that helps:
s = {
id = "3AF0E3D2-BC6A-4D53-A7BE-B7A6C4D673AC",
internalName = "Make Real File Copy",
title = "Real File Copy",
type = "Export",
value = {
collisionHandling = "overwrite",
exportFilters = {
exportServiceProvider = "com.adobe.ag.export.file",
exportServiceProviderTitle = "Hard Drive",
export_colorSpace = "sRGB",
export_destinationPathSuffix = "",
export_destinationType = "sourceFolder",
export_useSubfolder = false,
extensionCase = "lowercase",
format = "ORIGINAL",
includeVideoFiles = false,
initialSequenceNumber = 1,
jpeg_limitSize = 100,
jpeg_useLimitSize = false,
metadata_keywordOptions = "lightroomHierarchical",
minimizeEmbeddedMetadata = false,
outputSharpeningLevel = 2,
outputSharpeningMedia = "matte",
outputSharpeningOn = false,
reimportExportedPhoto = true,
reimport_stackWithOriginal = true,
reimport_stackWithOriginal_position = "below",
renamingTokensOn = true,
size_doConstrain = false,
size_resolution = 300,
size_resolutionUnits = "inch",
tokenCustomString = "RC",
tokens = "{{image_name}}_{{custom_token}}",
tokensArchivedToString2 = "{{image_name}}_{{custom_token}}",
useWatermark = false,
watermarking_id = "<simpleCopyrightWatermark>",
version = 0,
Let me know if you have any questions.
Jeff

Dvd is done, how do I make copies?

I created a movie in iMovie, shared it to iDvd, applied a Theme, and burned a dvd. Now I want to make multiple copies of the dvd. To do so thru iDvd would take a very long time, as the movie is 1 hour and 45 minutes. I have Popcorn, Handbrake, and MPEG Streamclip software, and am looking for suggestions on the best way to make copies of my dvd. I don't want to diminish the quality. If you have ideas, please be specific on what settings to use in the other programs. I used Handbrake to put the movie back onto my hard drive, but I created a .m4v file, which does not seem to have been the way to go. When I click on that, I do not get the opening menu, the movie just starts, and I don't think Popcorn recognized it.
Thanks.
Joey

+To do so thru iDvd would take a very long time, as the movie is 1 hour and 45 minutes.+ Only the first burn takes a long time because the movie first must be encoded. Once the first burn is completed, the next ones take only a few minutes. For a movie of this size, each disk will probably burn in less than 15 minutes.
I recommend that you create a disk image file from your iDVD project and use that for any future burns. You open your iDVD project and select 'File->Save as Disk Image' to create a disk image file. This process will take as long as the original burn because of the encoding time, but the end result will be a disk image file not a burned DVD disk. You can then use this file to burn DVDs of the project whenever you wish. It is a self-contained file, so you can safely delete the original iMovie and iDVD projects if you wish, once you know that the image file works ok.
You burn further DVDs using Disk Utility or Toast. See these for help:
Creating a disk image from your project-> http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6733.html
Burning a disk image->http://support.apple.com/kb/HT2087?viewlocale=en_US
You could also make a disk image file from the DVD you already made, if you no longer have the iDVD project:
http://support.apple.com/kb/HT2059?viewlocale=en_US
Then burn from the disk image as above.
Disk image files are smaller than the original iMovie and iDVD files, and are good to save as backups for your projects.

Hash could not be matched for the downloded content. Original ContentHash = , Downloaded ContentHash

<![LOG[Download done setting progress bar to 100]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="1" thread="2544"
file="downloadcontent.cpp:1603">
<![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="1" thread="2544"
file="downloadcontent.cpp:1726">
<![LOG[Failed to open file c:\_smstasksequence\packages\cms00007\configmgr2012adminui-rtm-kb2717295-i386.msp with error [32].
]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="3" thread="2544" file="securityutil.cpp:478">
<![LOG[HashFile - exclusive access check for the file failed.]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context=""
type="3" thread="2544" file="hashdir.cpp:227">
<![LOG[Failed to hash file, Win32 error = 4103]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="3"
thread="2544" file="hashdir.cpp:631">
<![LOG[Hash could not be matched for the downloded content. Original ContentHash = 0617F93A16E48E5E4AE958081967812D78AF06F608A1C39CD9DE85D97003AD01, Downloaded ContentHash = ]LOG]!><time="15:54:30.490-120"
date="01-21-2013" component="InstallSoftware" context="" type="3" thread="2544" file="downloadcontent.cpp:1771">
<![LOG[0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2900)]LOG]!><time="15:54:30.490-120" date="01-21-2013"
component="InstallSoftware" context="" type="0" thread="2544" file="resolvesource.cpp:2900">
<![LOG[DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword
), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3007)]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="0" thread="2544"
file="resolvesource.cpp:3007">
i saw this links :
http://social.technet.microsoft.com/forums/en-US/configmgrosd/thread/909ea31c-7bda-49e2-8b06-ed4fc9c3c48c/
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/4801408b-de60-488c-9d80-7a87134abbaf/
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/4942384c-161c-454f-b8da-bc2a24844602
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/a57bb130-f231-4ced-8ec9-2f645ef9e5f1
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/7146fa83-d00e-4fc1-924b-a829860e506a
i did not try to do this Antivirus Scan and Exclusion Recommendations (i relay don't see why i need this if all oder task finshing succesfuly
http://blogs.technet.com/b/configurationmgr/archive/2010/11/30/configmgr-2007-antivirus-scan-and-exclusion-recommendations.aspx
i redownload the file from the -kb2717295 and recreate the package , i run this image deployment on all kind of PC they all failed, here is the
file : configmgr2012adminui-rtm-kb2717295-i386.msp
i don't know why this file failed, i run this manual it work and this task is also a deployment on collection and it have 100% successes on 8 pc
i wander what make it failed .

This is what worked for me. I had to create a brand new package and push it out to the DP's. Then updated my Task Sequence with the new package. It worked perfectly for me. I hope this helps.

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

I made and burned a slideshow in iDVD and gave a copy to a friend with a Mac notebook. Is there a way she can put it on her hard drive to make copies of it? Does she need to have iDVD?

I made and burned a slideshow in iDVD and gave a copy to a friend with a Mac notebook. She would like to made copies of it. Can she do it if she doesn't have iDVD?

She can easily make copies of the DVD using Finder:
How to copy previously-burned DVD-R video discs
http://support.apple.com/kb/HT2059

How to make copies of delivered class/function module.

Hello All,
Can anybody tell me how/where should I go, to make copies of delivered class "CL_HRMSS_RECRUITING_WF" and the function module "HRWPC_EREC_CREATE_EREC_OBJECT".
Also if I am renaming with Z<my-class-name>, and using the method "CREATENBOBJECT" in my renamed class, will there be a problem with naming conflicts as "CL_HRMSS_RECRUITING_WF" already has the same method "CREATENBOBJECT".
Kind Regards
Srinivas.

hi Srinivas,
Can you tell me how I should create a package:
Ans:
1-> GOTO transaction SE80
2->Choose Package from the first drop down box
3->enter a name starting with Z or Y, press ENTER
4-> you will be prompted for confirmation to create a PACKAGE..Click YES..
Thats it.. package is created...

now go to attributes of each objects, which you had created as local, and change the package name from $TMP to the name of the package that you have created...you will be prompted for Transport request..create a request by clicking on the create button...save...
Hope this helps,
Sajan Joseph.

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not. My question are: Why does my computer think it's blank? And how can I copy a DVD?

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, Sheila

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Table of contents using cfdocument

Good day,
I've been trying to create a table of contents using
cfdocument. I've been unsuccessful in extracting the page number
out of the document. I know they are reserved for that scope, but
i've tried copying the value into an application variable and
accessing it on a different page to no avail. I've tried to
increment a basic counter, can't seem to get that to work either.
If anyone has any experience in this, please help me out.

I'm not sure you understood my post. I was able to do exactly as you did -- create a master page with a frame and the section marker character (which shows as "section" on the master page) and then add the actual marker text in the numbering and section options. The correct text appears on the live document page.
When I tried to make a TOC the text was not picked up UNTIL I selected and overrode that master frame onto the document page (Ctrl + Shift + Click on Windows or Cmd + Shift + Click on Mac on the frame you want to override). Once overridden, the text appeared as expected in the TOC.
You are correct about the page number for that page. You can use a different master without a page number, or you can override and delete the number frame from the master page. I presume you will either use a different master for the first page and following pages of any section to avoid having the marker appear on all pages, or you can override only the first page so that you don't repeat entries in the TOC for every page in each section. If you are using the Section Marker as a running header you might want to read about Running Header Variables in the Help files instead. In many ways the use of a variable might be simpler and more straightforward.

Display Table contents using HTMLB...Urgent Help Plz...

Hello All,
Im working on EP SP14 and SQL Server 2000.
I have successfully established database connection.
I want to know how can I display Table contents using TableViewModel in HTMLB.
Please help.
Its urgent.
Awaiting Reply.
Thanks in advance,
Uday

See /thread/80270 [original link is broken]
(please stop crossposting every question into two forums; thanks in advance)

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

Plug the device into the computer.
Select the content desired to sync.
Sync.

When I try to charge the phone it says for faster charge use original cable

Just got my Note 3 late yesterday afternoon. When I try to charge the phone it says for faster charge use original cable and that is what I am doing. Even tried a different charger and it says the same thing so I have not been able to use my phone at all. Please help. I am going back to the store today when they open. Help!!!

I want to help make it as easy possible to charge your device myluv2drive! Is this happening with the original charging cable itself or is this an alternate charger? Have you tried a battery pull since this started? Did this happen the first time you tried charging it? Any different response when trying alternate outlets?
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

Same content gets printed while printing copies in SRM

Hi ,
I am trying to print one original and 2 copies for a PO form. There are few texts specific to the copies. I am using copies window to achieve this. All these are getting displayed correclty in the spool request. When I take the hardcopy/print the original PO is getting printed thrice.
What could be the reason for this?

Copies are not supported in adobe form. There are certain things which are different between the forms. SAP note 1009567 explains it clearly. Alternative solution to get multiple copies has been explained in the thread Multiple copies in Adobe form with different header text.
So,i'm closing this thread.

BI content - use original or make copies?

Similar Messages

Maybe you are looking for