BI Hierachy node values not showing up in WebI LOV

Hi Experts,
We are on BI 7.0 Ehp1 and BOBJ ENTERPRISE XI 3.1.
We have a Bex query with Hierarchy and Hierarchy node variable.
In the Webi Query LOV only the Hierachies show up but not the values for nodes.
Since these are not mandatory vairables the WeBI query runs fine and fetches the required data.
The variables are in the Filter section of the Bex query and the refrence characteristic on which the hierarchy variable is based is NOT in the free characteristic and the rows.
There are 5 hierachies in BI with about 5300 nodes.
Any help or leads will be highly appreciated!
Thanks,
Satyen
Edited by: Satyen Popat on Feb 5, 2010 12:30 AM

Hi Ingo,
As always appreciate your response. Yes, both the variables (Hierarchy and hierarchy node variable) are part of the universe.
When I hit refresh on the LOV screen for the node values <No Values> is returned.
These values show up properly on the Bex side.
Thanks!
Satyen
Edited by: Satyen Popat on Feb 5, 2010 12:44 AM

Similar Messages

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

Business catalyst site is not showing up on web searches

I built my site in Muse and published directly from Muse onto Adobe Business Catalyst. It has been a couple of months and this site is not showing up on web searches. I believe it has something to do with my Business Catalyst settings. Frustration has set in and I'm turning to this commuity to seek direction. The site is edgeadvertising.ca
Should I be looking at Googles webmaster tools?

Hi edgydoug1,
You have a challenging case since "Edge Advertising" appears to be a common business name with many other established websites for "Edge Advertising" or "Cutting Edge Advertising" businesses around the world.
First, I'm going to contradict Gaurav. I may be interpreting what I see on Google incorrectly, but it looks to me as though Google has indexed your site. It's a one page site. Correct?
A few things you'll want to do to improve the chances searchers will find your site:
1) Set the Page Title for your page in the Page Properties dialog. I recommend setting it to your business name. You might consider including Winnepeg in the page title, since that will increase the odds that someone looking for "Edge Advertising" in your area will find you, rather than the Edge Advertising in Washington, D.C., Tampa Bay, Fairport, NY, Houston Texas, etc.
2) You might consider putting your contact information where your copyright currently is.
3) Enter keywords for your page in the Page Properties dialog Metadata panel. Be sure to include Winnepeg and Manitoba (spelled out), along with your business name and the services you provide.
4) Pay special attention to where you apply h1, h2, h3 tags via paragraph styles. You should probably make the main "Edge Advertising" title the h1 for the page.
There are two primary factors to SEO, indexing and page ranking.
Indexing is about making sure your pages have content that corresponds to what your prospective customer will be searching for. This generally means choosing ~3 search phrases and doing what you can to be sure those phrases and the words in those phrases are used in your site. Your site has quite a bit of live text content, so you're probably doing well but you'll want to think about search phrases and see how well they correspond to words and phrases in your content.
With a single page site you're limited to a single page title and no filename for the HTML file (since it will be index.html), so you'll want to make sure the page title is good and you make good use of h1, h2, h3 tags. You may also want to add alt tags to your images (if you haven't already). And keywords in your metadata.
Page ranking is largely about the number of other sources (websites, twitter, facebook, blogs, etc.) that contain links into your site. If lots of other sites are referring to your site, your page ranking will be higher relative to other sites with similar page content.
Again, given the business name is not unique and many of the other businesses with the same name are likely to offer the same services, it's going to be difficult to differentiate your site to web searchers. You'll want to make sure the geographic location of your business is prominent along with the principals and anything else that may be unique to your business (that also known to web surfers).
Finally, when you make a change to your site, if you submit your sitemap.xml file to Google using Webmaster Tools it theoretically will encourage Google to re-index your site sooner, though there's no guarantees how long it will take.

All items of delivery is not showing on SNC Web Portal

Hi Experts,
We are facing one strange issue in SNC. I am explaining scenarion in detail.
We have one sales order having 10 line items in R/3 & it is showing correctly on SNC web portal. For that sales order we have delivery with 10 line items ( out of 10 items 4 items having Batch mentioned in delivery) in R/3 but in SNC Web Portal it is showing only 6 Items. Basically whatever the Items having batch is not showing on SNC Web Portal.
I have checked lots of deliveries & all are having same issue. I have checked all the IDOCs, XML messages to XI & then APO having all the line Items of delivery but all items are not showing on SNC Web Portal.
Could you please advice, what it this issue & how can we resolve it?
Thanks in Advance.....
Regards
Sujay

Hi Chandrasekhar,
I checked this note but this doesnot answers my query.
Regards
SV

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Just checking on another odd feature: Typedef enum Property Node "Value" not reflecting changes in the Typedef?

Just encountered this odd behavior in LV 2011 which I reduced to the following example:
- create a new VI and drop an enum control on te FP.
- make this control a typedef and open the corresponding typedef
- create a "case 1" item and a "case 2" item
- save the typedef (I used the name Typedef Control 1) and CLOSE it (this is to allow updating of the original control).
- drop a case structure on the diagram and connect the enum to it:
So far so good. Now create a "Value" Property node for the enum and use it instead of the terminal:
If I now go back to the typedef and add a "case 3" item, save the typedef and close it, the control is updated, but the Property node is not.
How do I know that? For one, the Case Structure contextual menu does not offer to create a case for every value. Also, if I add a "case 3" case manually, it turns red.
Luckily, the magic Ctrl-R key stroke actually does solve this problem.
Tested in LV 2011.

By Ctrl-R trick do you simply mean running the VI? That is one way to force a recompile, but if you hold down Ctrl while pressing the run button you can recompile without running. This should not be "dangerous" in any situation.
As you have drawn your example, I see no reason not to use a local in that situation (ok, maybe for vanity). Still, I view the behavior you describe as a bug, and it should certainly be fixed for the benefit of local haters out there. You have to be a little careful where you draw the line between what gets handled in real time and what gets handled only at compile time.

Filter values not showing on iPad

Hi,
I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
How do I fix this issue?
Regards,
Nikhil

Hello Simone,
please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
In the Release notes for this Version it is described how to do this:
Open Document
1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
in the OpenDoc URL.
2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
not supported in the OpenDoc URL.
3. Session management parameter (token) is not supported.
4. Output parameters are not supported in the OpenDoc URL.
We tried to use the following link, but the report did't refresh with the correct parameters:
http://svie32sapbo1:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AfFdCbmEEvZIiVXXFLh4iPY&sIDType=CUID&sRefresh=Y&lsMWert=Alarmierung
The Part "Wert=Alarmierung" should be dynamical in future.
Thank you and regards
Wolfgang

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Metadata values not showing in Site Studio layout using Idoc Script

Hi All,
We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use  to show the content item Title with no problems.
However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code  simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
The  value works for ALL items, but the  does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
Is there something I am missing? Any help is greatly appreciated.
Luke.

Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
I guess I need to either:
- change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
- explicitly make a resultset using  with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
9.45 SS_GET_SEARCH_RESULTS
■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
service. It allows some Site Studio features to be specified simply as flags and have
the real query syntax be constructed on the server. It can modify the standard
'SearchResults' resultset to contain an additional column called 'ssUrl' which will
contain the Site Studio-friendly url for all of the search results.
■ Parameters:
– siteId: the unique identifier of the site (required).
– ssLimitScope: True/False, restricting scope to within the site only (optional).
– ssUserSearchText: user-supplied search text (optional).
– ssWebsiteObjectType: object type (optional).
– computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
■ Returns: resultset named ’Search Results’.
■ Security: The user must have at write access to at least one security group on the
content server
Thanks to everyone for their help. Almost there!
Edited by: lukeb2112 on 18/01/2010 17:30

Discount value not showing in the P.O printout

Hi,
I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
Any help will be greatly appreciated.
Nijamudeen.S

Hi,
if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

BCWP values not showing in CNE5

Hi,
After executing CNE5 report it not showing BCWP value in particular project only.I have checked all the necessary data like actual dates are maintained.
What could be the reason.
Please guide.
Regards
Nitin

Hi,
Thanks for reply.
I've already done that.
BCWP is not showing only for 4 projects & in other project it is giving correct BCWP value.
When we generate MIS through BW Module I am getting BCWP graph for the same project whose BCWP not showing in CNE5.
Thanks & Regards
Nitin

Variable value not showing in sql developer tool

HI,
I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value. please tell me is there any issue in sql develper tool currently i am using.
sql developer version 2.1.0.63

Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
Oracle SQL Developer Downloads
Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

UDF Value not showing in SQL

Dear Experts...
Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
I can't understand why SQL does not showing me Value of UDF.
Regards,
Ravi

Hi Ravi,
Run below query in query generator for specific document number and check if udf values are shown or not?
SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
Thanks,
Neetu

Value not showing in Radiogroup

Hi,
I have a radiogroup that seems to be defined correctly based on a database column value, but the selected radiogroup values do not show up on the Edit form. I see the values in the table and on a report but not on the Edit form. Other fields on the form show up correctly. The Radiogroup works fine for data entry, but not for edit. Any ideas on what could be wrong would be appreciated. Even compared it to other forms and the radiogroup properties are almost identical.
Using version 3.2.1 of Apex.
Thanks,
pat

Is the radiogroup item set to retrieve the value from the database with each page view? This is controlled with the "Source Used" setting on the radiogroup item.
This is from the help:
>
Determines which value takes precedence, the cached value from session state or the item source value. For items with source type Database Column, select Always unless you do not want the associated row fetch operation to populate the item if the page branches back to itself.
For items with other source types you must decide based on how the page is used, whether the previously sourced value should be displayed, or if the source type should be applied anew for each page view.
>
Just an idea.
Earl

BI Hierachy node values not showing up in WebI LOV

Similar Messages

Maybe you are looking for