Selection screen in workbook possible?

All,
Is it possible to have selection screen, filter and drill down features of the query within a workbook? If yes, please let me know the details
Thanks!

rows appear in differnt sequence in the the anlyzer from that in query designer.
I had initially created a query in 3.x query designer then edited in 7.0 and had added a couple of rows to the query designer (7.0)
Now when tried to open the report in 3.x, it shows the two new rows at the end of the report even though the new characteristics were at the beginning.
Any idea why this may be happening?
Thanks!

Similar Messages

On Selection Screen - Is it possible to show the text Blinking

Hi,
On selection screen - I have 3-4 Texts. (COMMENT)
User wants to 'Highlight' one of them - If possible want this text 'Blinking'.
How can I do it? Is it possible ?
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
SELECTION-SCREEN COMMENT 1(70) text-004.
PARAMETER: rb_exec RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 35(30) text-005 FOR FIELD rb_exec. "This Text
SELECTION-SCREEN ULINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(70) text-006.
PARAMETER: rb_smry RADIOBUTTON GROUP g1.

For making highlighted, you can make it bold - please see below link:
[Bold text|Bold character and font change in some portion of report;
Blinking is not possible in report...
Thanks

Variable Selection Screen in WorkBook

Hi,
I have an workbook with variable screen, it is executing fine in my system, but it is executing without variable screen in my user's system. So I want to provide the variable screen selection in all the systems, Please provide solutions.
Note: if i open the workbook in another system, i observed that it is not showing the same properties(ie properties check boxes).
Regards,
Uthant.

hi.
check if your user has personalized the variables, because they won't show up if he refreshes. you have to call up the variable screen explicitly by using the option from the menu and then you can change the personalization setting.
br
jacob

Is it possible to move the ldb selection screen?

Hi All,
I have a custom program which uses a logical db.
The selection screen from the LDb is displayed first and then my custom selection screen is displayed.
There is a requirement where the custom selection screen needs to displayed first - at top and then the selection screen from the LDB.
Is it possible to move down the selection screen from the LDB?
If so then please let me know how...

Hi,
with LDB, you can just hide or display LDB selection screen elements,
but moving your custom selection screen above LDB selection screen is not possible, as upto my knowledge.
Thanks.
Raghav M.

How to add default value to the Exclude single value in selection screen..

Hi Experts,
i have searched in sdn, but not able to get proper results,
in my report i have a selection screen, in that there is a Select-option like status, for this status i need to exclude '02'
for this i need to add the default value under exclude singale values option, not in lower and upper limit.
can anyone help me...
Regards,
Sudha.
Moderator message: please search for available information/documentation before asking, don't just claim you did.
Edited by: Thomas Zloch on Oct 27, 2010 2:50 PM

Hi,
you can use the function module SELECT_OPTIONS_RESTRICT .
This function module simplifies the handling of SELECT-OPTIONS on the selection screen by restricting possible selection options and signs.
By calling this function module, you can restrict the number of selectio options available for the chosen selection field. You can also disable the function allowing users to enter values to be excluded from the selection (SIGN = 'E').
Regards,
S.Velsankar

Logical database :-prevention of selection screen

when i use logical database and i use the statment
get DBTAB, i am prompted with a selection screen,is
it possible to supress this selection screen and supply
some value.

I guess you mean to modify the screen layout during AT SELECTION-SCREEN OUTPUT via
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
screen-active = 0.
MODIFY SCREEN.
ENDLOOP.
This does hides all screen elements but the screen is still displayed.

F-32 - Select list of accounts at first selection screen

Hello everybody,
Like the title says, I would like to select a list of account (and a list of CGS code) directly from the first selection screen o fF-32 transaction code.
Do you know an issue to do that?
BR
Mathieu

Hi,
   TY to help me.
   But the account can be selected at selection screen but by default you can't entry no more than one.
   After selection screen it is possible to select several accounts and CGS code. (on detail screen)
   So I would like to select all my accounts directly at the first selection screen.
Does a standard solution exist for that?
BR

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

Showing Selection screen Varible values on the workbook report

Hi,
I want to show values of selection screen variables on the workbook report.
Please help me on this.
Thanks,
Isiri.

Hey All,
I'm also face the same problem.
IF i use the TEXT related with filter,the workbook become bigger.
In BEx analyzer 3.5 you had the possibility to remove query results from your workbook before saving it.
Any idea's how you can do this in the BI 7.0 Analyzer?

Is it possible to display a tag at the selection screen in the output.

Hi all,
   When you go to se38 and in the program editor screen, at the bottom right end of the screen you find a value called NUM and when you place your cursor on that it displays a tag that says "Num Lock Mode. Double click to toggle."
   My query is, when i execute a report it takes me to the output screen that has a parameter, here i want to display a tag, say "enter the record as it is in the database". Is it possible to have such an option.
   If you'll are wondering why I'm looking for such an option it is just to make a report that can be understood by many.
P.S: Not only on the NUM field the tag is available. Even on tools like activate display and so on.
Regards,
Narayanan Chandran.

If it's a report program, use a comment in the selcetion screen for information of the user as shown below.
* Information
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-003.
SELECTION-SCREEN COMMENT /1(60) text-004. "Text containing the information message
SELECTION-SCREEN END OF BLOCK b1.
If you are using a module pool, you can create a tooltip for the element as suggested.

Bex selection screen does not appear when running workbook via RRMX.

Hi Experts,
I have following problem: When I run a BEx workbook from a user menu (trans. RRMX), I get no selection screen, but just the workbook with text: "no data found". When I press the refresh button (variable change button), the selection screen appears and after that the data are visible in the workbook. When I run the underlying query the selection screen appears normally. With some other workbooks with selections I do not have such a problem.
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Thank you,
Michal

Dear Michal,
Your Question:
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Answer:
Open the workbook and goto workbook setting from the analyzer design toolbar.
Check the Refresh workbook on check box.
So every time the selection screen will be appear after exectuion of the workbook.
Thanks & Regards,
Praveen.K

Is it possible to rearrange the order of SAP STD Selection Screen?

Hi.
Is it possible to rearrange the order of SAP STD Selection Screen?
Example:
IW69 has Location data selection at bottom of screen.
Is it possible to move that to top of the selection screen?
We are on ECC6.0.
Thank you,
Brett.

Hello Brett
You may try to use GuiXT:
[Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
Regards
Uwe

Is it possible to debug the selection screen???

Hi Frdz,
Is it possible to debug the selection screen.
eg: if i want to know what is happening in PBO and PAI modules of the selection screen i am not able to debug that.
Even in code if i click on MODULES present in PBO and PAI modules it is saying MODULE doesnot exist!!!!. So i can't put the break point. even if i press /h it will go to Report events like INITIALIZATION, AT SELECTION-SCREEN but not PBO and PAI modules!.
Also what is the meaning of exclamatory mark here(Before select option name)
MODULE !SO_UDATE.
MODULE !SO_UNAME.
Thanks,
Vinod.

Hi Vinod,
Double click on the module and then put the break point for the first statement of it. It will work.
Reward points if useful.
Thanks,
Khan.

Selection Screen Variant (optionally default) -I dont think it's possible!?

I have spent a lot of time looking at this issue - researching forums/sap help/on the system - so any help appreciated...
On the selection screen (for tx me59n) is it actually possible for users to set a variant as default on the selection screen? It's actually that I want "Test Run" to be defaulted.
This is the ideal scenario:
- The selection criteria variant is created centrally (or even individually by the user)
- The user can then optionally set this variant as their default selection criteria for the transaction
- Next time the user runs the transaction, the defualt variant is used
What I do not want is:
- User having to select the variant each time they run the transaction
- The variant always being default (it should only be default when user decides they want it as such)
Any ideas? I can't see that it's possible....?
thanks in advance,
Matt

I've been trying SHD0 alot, but doesnt seem to work - again, i've spent time reading and trying it out but with no luck.
This is how I'm doing it to try to default "Test Run" checkbox for ME59n
- Run transaction SHD0
- Input "ZDefault" into Transaction Variant field
- Click create
- ME59n loads
- I tick "Test Run" (which is what I want defaulting for the transaction)
- Click save
- It prompts me to create screen variant
- I input ZTEST_VARIANT and click save
- I get a pop-up box which I enter ZTEST_VARIANT to name field but dont make any other changes
- Get message saying ZTEST_VARIANT saved
- Click back to Transaction Variant screen
- Save it as a local object
- Get message saying "Trans Variant and Screen Variant Saved"
- Click back to initial SHD0 screen
- Click TEST to try it out.
- ME59n loads, but "Test Run" is not checked - the variant appears not to have been loaded at all.
I run ME59n independently and still nothing seems to get loaded when I run the transaction. Although the new screen variant is availbale in the variant list, which if I select it it works perfectly. But I want make it default??? How do I do it?
Any ideas what i'm missing?
Usually I can figure these things out pretty quickly, but this one has me stumped!
thanks
Matt

Interaction in the variable selection screen possible?

I have a query with related 3 variables: a Product Division is related to a Hierarchy-name and to a Hierarchy-node. I want the enduser only to fill in 2 variables in the selection screen: Product Division and Hierarchy-node. Is this possible?
If a enduser is entering a Product Division in the variable selection screen, the Hierarchy-name can be derived in CMOD with step2. But now we want an additional second variable selection screen for filling in the Hierarchy-node, which is related to the derived Hierarchy-name in CMOD.
Can somebody help:
Is there a second variable selection screen possible, or is there some interaction within one selection screen possible?

Well, In the exit itself you can try ppopulating the hierarchy node for the second variable too. Think well, it is pretty much possible doing it along with the same code.

Selection screen in workbook possible?

Similar Messages

Maybe you are looking for