BI Role Integration
Hi,
I see from the documentation that the Role function withing the Web Application designer has been withdrawn in 2004s. There is a comment about utilising the new BI role function within the 2004s portal but I can not find any documentation on this.
I note that the upload function is availbale but this is a manual process rather than the nice dynamic integration the WAD Role item produced.
Can someone point me in the direction of the documentation on how to use the new BI integration function (if such a thing exists)
Kind regards
Richard
We are having the same issue with the role menu web item.
See the attached discussion on this topic.
Web Role Menu Item
I found this link from for uploading the roles from ABAP based system to Portal system.
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/5e4d40ecf00272e10000000a155106/content.htm
There are also some How to Guide available on this topic.
https://websmp202.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=501100035870000008223&_HIER_KEY=601100035870000111191&_HIER_KEY=601100035870000129108&_HIER_KEY=601100035870000169890&_HIER_KEY=601100035870000169883&_HIER_KEY=601100035870000172570&_HIER_KEY=601100035870000172184&_HIER_KEY=601100035870000172187&_HIER_KEY=701100035871000283750&#HOME
Similar Messages
-
How to change the ROLE: Integration server in business system in SLD
Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
RehanHi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan -
Logical System for Role Integration Server
Dear all,
I need your help to clear my confuse.From ID I had assign business system as defined by Role Integration Server but when I check Adapter-Specific Identifiers, nothing show in Logical System. I already define Logical system in SLD. but I'm not sure incase of Role Integration Server will show logical system same with role Application System or not. becasue the other one as role Application System it's fine.
Thanks and Regards
ParkHi Park,
I could not clearly understand your question .But i think you want to know the roles of the Integration server and Application system.I would like to share some thing on their difference .Hope this will clearify you.
A business system can be configured as an Integration server or Application system:
Integration Server
The Integration server executes only integration logic available Integration Builder. They can also be identified as Pipe Line Steps. It receives XML message, determines the receiver, executes the mappings, and routes the XML message to the corresponding receiver systems. Thus configured Integration Engine is identified to be Central Configured Integration engine.
Note: Only one client of SAP system can be configured as Integration Server.
Application system
The Application system will not execute the integration logic. It in turn calls the integration server to execute the integration logic if required. It acts as sender or receiver of XML messages. So, the Application system with a local Integration Engine requires the Integration server to execute the integration logic
Thanks,
Ram. -
How to create Business System in SLD with Role "Integration Server"
Hi,
We were trying to create a Business system of role "Integration Server" in SLD. However, we are getting an error saying "There is already an Integration Server defined foer the selected Technical System. Select as Application System."
We could not find any relevant BS with the role "Integration Server" for that Technical System.
Please advice.
Warm Regards,
Bhaswarhmm
I have same situation on a fresh installation.
Also error "There is already an integration server defined for the selected technical system; select the Application System role".
But, there is no Business system at all visible and also the Business system tab of the technical system is completely empty.
What to do?
BR Patrik -
Unable to create Business System with role Integration Server
hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AMHi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus -
Adapter Engine / Integration Server Problem
Hi,
I'm new to SAP and I have some questions regarding my new PI 7.0 SP10 setup.
Problem:
In Integration Directory, when I tried to define a communication channel, after specifying the "Adapter Type" (File in my case), I had to specify the "Adapter Engine" from a drop-down. But the dropdown list is empty!
What I've done & Observations:
1. I've recently imported the file "XI7_0_SAP_BASIS_7.00_06_00.tpz" (From the installation DVD). After importing, I've refreshed the SLD cache.
2. SLDCHECK reveals that the connection to SLD is successful.
3. RWB component monitoring shows:
Integration Server - No light (Node cannot be expanded)
Integration Engines - No light (Node cannot be expanded)
Non-Central Adapter Engines -
Adapter Engine ootspdbs02 (Red Light)
- Self Test Failed - Details: Client 010 is not available in this system.
- Cache Connectivity Test:
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.ootspdbs02, string], target element type: SAP_BusinessSystem)
J2SE Adapter - No light (Node cannot be expanded)
Tools
- System Landscape Directory ootspdbs02 (Green Light)
- Integration Directory ootspdbs02 (Green Light)
- Integration Repository ootspdbs02 (Green Light)
- Runtime Workbench ootspdbs02 (Green Light)
4. In my SLD - I've defined a business system PI_BS_01
Role: Integration Server
Pipeline URL: http://OOTSPDBS02:8001/sap/xi/engine?type=entry
Group - No Group Assigned.
Client: 001 of PI1
Technical System: PI1 on ootspdbs02 - Release 700
Given the above observations, can anyone please point out to me where I went wrong?
Any advise is greatly appreciated.
Thank you.
Best Regards,
Ron LaiHi Archana,
The configuration in SLD DataSupplier is:
Latest Send Activity
2007/01/04 09:18:09:564
Used HTTP Parameters [http host:port] [user] [protocol]
[ootspdbs02:50100] [SLDDSUSER] [http]
Sending Node [nodeID] [hostname]
[11621750] [ootspdbs02]
Send Result
Success
Next Automatic Send Timestamp
2007/01/04 21:18:08:189
Send Type
Automatic (Time Scheduled)
Configuration Status
Valid
The hierarchy of this business system is:
Business System:
BS_NAUTICUS_OOTS [Role = Application System, Related Integration Server = PI1_BS_01, Technical System = TS_NAUTICUS_OOTS]
Technical System:
TS_NAUTICUS_OOTS [Type = Third Party, Software Component = SWC_NAUTICUS_OOTS, Product = Product_NAUTICUS_OOTS]
Basically I created product, software component, technical system, business system from scratch.
I did not put any dependencies to existing products/software components.
Regards,
Ron -
No service for system SAPNID, client 800 in Integration Directory
Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
Created Data Type
Import IDOC ORDERS.ORDERS04
Created Message Interface
Created Message Type
In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
Created the Scenario (name : FILE_FROM_IDOC)
Assign Business Systems as R3XID
Create communication channel(name: FILE_ORDERS_COM_CHNL)
Create Receiver Determination
Interface Determination
Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
SunilHi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
<u><b>Technical Systems.Detail</b></u>
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
<u><b>Business Systems Detail</b></u>
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: <b>100 of XID</b>
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
<u><b>SAPNID Business Systems Detail</b></u>
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: <b>800 of XID</b>
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case. -
HTTP Response code 404 - RFC Adapter des not connect to Integration engine
Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
ArulHI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh -
[Integration Engine Configuration Data] Error: No access to system landscap
Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
- We use http port for corresponding Integration Server.
- Business System with role 'Integration Server' created correctly in SLD.
- T-code SLDCHECK is all OK.
- T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh VoPlease can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -
ERROR Integration Engine configuration
hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierraall RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: <server>
port number: <port>
user : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@ Role of Business System: Integration Server
@5F@ Client 200 is Integration Server
@8S\QURL@ Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@ No access to system landscape at present
r
Comparison of Current Configuration with System Landscape
@5B\QOK@ Role of Business System: Current Configuration = System Landscape
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierra -
Related integration server in business system
Hi Gurus,
I am trying to create a business system of type WebAS ABAP , in the last step ( Integration Step ) i have selected
<b> Business System role :</b> Application system
But in the <b>Related integration server :</b> drop down i am not getting any values .. what could be the reason . What should i do to get values ??Hi,
In your SLD , is there a Business System that has been registered with the Role <b>Integration Server?</b> . You need to do this as a part of your post installation activities of XI and I think this is not done.
Once you create a Business System of role Integration Server you will then be able to find the option Related Integration Server with a value to be selected.
Regards
Bhavesh -
Integration server information isn't updated
Hi
In SLD ->Technical System ->Process Integration,
the update date of Integration Server have not been updated otherwise restart SAP instance.
regards,Hi
Try with this
Call transaction SXMB_ADM--> Integration Engine Configuration and
check if the role of the business system is Integration Server.
Press the Check (F7) button to check if the configuration is consistent
with the SLD.
There must be a WebAS ABAP business system in SLD for the XI system with the role Integration Server and not Application Server. If it is with role as Application Server, then change it to Integration Server. Now when u create any new BS for other systems, mark their role as Application Server and provide XI BS name as the Related Integration Server name -
Hi all,
Anybody has succesfully integrated Active MQ with Weblogic 9.x. Its not working for me.
plz help.
I get getting a wide range of errors.
Thnx in advance.We are just beginning proof of concepts with Active Roles integration (managing AD objects) using Quest Active Roles SPML provider. Has anyone else used this? We are using the custom HTTPIWA2 adapter (until we upgrade to newscale 9) doing webservice calls. I'm particularly interested in snippets of XSLT code to transform the inbound message from Active Roles.
-
Logical System Name Not appearing in the Business System
Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
RehanHi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan -
Hi AlL
I am working on the JDBC TO IDOC Scenario and when testing I get error:
Unable to convert the sender service ABC_Service to an ALE logical system
I check on the SLD under the Business System and what I find is that there is no LOGICAL SYSTEM NAME.
How to make the PI System to keep up the LS, on the TCode BD54 I created it
Role:
Pipeline URL:
Group:
Technical System: PI1 on saptrain1 Change...
Client: 001 of PI1
Logical System Name: #######
Thanks
YonelaHi Guys
On my JDBC TO IDOC Scenario when testing on the MONI I get the below error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message canceled
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
but on the SLD my Business System looks like this:
Role: Integration Server
Pipeline URL: http://saptrain1:8000/sap/xi/engine?type=entry
Group: No group assigned
Technical System: PI1 on saptrain1 Change...
Client: 001 of PI1
Logical System Name: LSJDBC
I have done
with this user : PIDIRUSER i have done the full cache
http://saptrain1:8000/CPACache/refresh?mode=full
CPA cache refresh (mode=full) successfully executed in 30937 milliseconds.
but when running
http://saptrain1:8000/sap/xi/engine?type=entry on the browser i get :
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope
What I am I missing out
Thanks,
Yonela
Maybe you are looking for
-
Problem 1 in my person form: hitting ora-1401 (view with check option).
In an earlier stage I had a table PERSON and a table ENSEMBLE. At some stage I decided it was not handy I was storing performing musicians in two different tables. So I set up a supertype, CONTRIBUTOR. PERSON is now a view on CONTRIBUTOR. The attribu
-
Closed lid, connected to external monitor with no image...
So I followed the directions on Apple support regarding setting up a Macbook Pro (Early 2008) to an external monitor. I'm using a Gateway FPD2275w (if that helps) connected to the DVI-VGA adapter, or whatever Apple calls it. I'm using a Bluetooth mou
-
Im trying to download an update to my ipad of bug fixing but dont kno how
How can i fix my ipad or how can i download a bug fixer
-
Embedding a font without subsetting.
Hello, I try to programmatically embed a full font into PDf in order to let the later editing of a document. What I do now is scanning through a font file and writing all the glyphs from the ttf into font stream. Also I create and write CMap using /T
-
Spry tabs loading data onClick
We want to use the Spry tabs, but we have tons of data that will be on each tab. We do not want to have to load all that data when the tab structure loads when they possibly won't be clicking on every tab. What is the best way to do this where the da