BIA recovery path for scenario not containing a backup

Hi, we are running a small BIA enviroment; 5 blades, 1 is a backup blade.
Environment is stable, it is running on revision 48.
We recently moved from having 2 backup blades to 1, by switching a backup blade to a master. This was necessary as we were running out of capacity.
Next step would be to trade in the last backup blade to a master; and add extra blades to appoint as backups.
Question is. In the case of having no backup blades; and one blade fails. What is required to get all the indexes in memory with the remaining blades (so -1). I understand that having less blades will result in performance loss; but I want to understand what the recovery path is.
Edited by: Paul Bartholomeusz on Jul 28, 2009 8:56 AM

Hi Paul,
If you have no backup blade and the indizes are splitted over all your blades and one of your server fails than you must reindexing with your remaining blades to get back to normal operation.
But why you don´t run backup mode mutual? Ok SAP don´t recommend this backup mode because in some few cases you will get problems, but we run it since 1 year and I tested it with some cases and it works without problems (Rev. 49).
What for a memory consumption have your blades? over 50%? The performance loss depends on your current memory consumption. Please read [this thread for information about memory usage for BIA|;.
Best regards,
Jens

Similar Messages

Customised xpath expression for does not contain

Hi folks,
Is there a customised symbol for xpath expression for "does not contain" . cant seem to find it in the xpath operators.
Thanks
Pratichi

Hi,
Refer the below link:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/15981541f7648ee10000000a1553f7/content.htm
-Supriya.

The backup location does specified does not contain any backup. Specify another backup location.

We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance). I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains.
I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives. I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive. At this point I get the above error "The backup location does specified does not contain any backup"
All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?

Hi,
I would like to confirm the exact backup process:
When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
If it is a network path, could you restore it with \\server\g\folder instead?
If you have any feedback on our support, please send to [email protected]

3 Files are in recovery modes & we are not having any backup, how to recove

3 Files are in recovery modes & we are not having any backup, how to recover.
select from v$recover_file;
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
137 ONLINE ONLINE 1.7142E+10 05-MAR-11
138 ONLINE ONLINE 1.7142E+10 05-MAR-11
139 ONLINE ONLINE 1.7142E+10 05-MAR-11
These 3 files are part of tablespace, whcih is having total 26 files
SQL> select FILE#,TS#,name from v$datafile where TS#=12;
FILE# TS# NAME
137 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_00.dbf
138 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_01.dbf
139 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_02.dbf
140 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_03.dbf
141 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_04.dbf
142 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_05.dbf
177 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_06.dbf
178 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_07.dbf
179 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_08.dbf
180 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_09.dbf
181 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_10.dbf
182 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_11.dbf
183 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_12.dbf
184 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_13.dbf
185 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_14.dbf
186 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_15.dbf
187 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_16.dbf
188 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_17.dbf
189 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_18.dbf
190 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_19.dbf
192 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_20.dbf
195 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_21.dbf
196 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_22.dbf
200 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_23.dbf
257 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_24.dbf
258 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_25.dbf
260 12 /dbo/data/IBPROD/IBPROD_TDB_IDX_26.dbf
Pls treat it urgent.

Pls treat it urgent. If it's urgent , open a priority 1 service request on My Oracle Support/metalink.
If it's not so urgent, set the datafiles to OFFLINE, so you can open the database.
Without backup you only can recover if you have ALL archivelogs since creation of the files. Normally that's rarely the case.
Werner

Class path for parser not working

The following were not found in my import when i build the program:
import org.w3c.dom.*;
import org.xml.sax.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
I thought this problem would be solved by having a SAX parser(sax2r2).
I set the class path as follows:
SET PATH=%PATH%;%JAVAHOME%\BIN
PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;
C:\jdk1.3\lib\bin
C:\jdk1.3\lib\sax2r2.jar;
sax2r2.jar is placed in the correct folder.
What could be the problem?
Cheers

You set the PATH like that. If you want to set the CLASSPATH then you need to set the CLASSPATH variable.

I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

HELP! Does anyone know a Data Recovery Expert for I-CIoud? -My calender disappeared during I-Cloud transfer of data from old I-Phone 4 to new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calender disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calendar disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
The Apple techs are looking. But they can't find it. Nor can they find a back up on my laptop, Evidently when I backed up my Iphone to computer the calendar wasn't syncing. Since I only use the calander on my phone - I never noticed.
The Apple store rep that sold me the I-Phone 5 on Monday, was transferring my contacts and calendar thru I-Cloud (I never used I-Cloud before that moment - and always had it turned off). He successfully transferred the contacts - which are still on my phone), but the Calendar weirdly split into 6 calendars (2 of which were linked to my G-Mail which only had a few entries) (4 were linked to my MSN / Hotmail email and contained all the major events/data). I never created calendars that were separate or liked them to 2 different emails. I just typed entries into the I-Phone calendar. However, the calendar did exist on the new I-Phone for 24 hours. Something happened during transfer. When the Apple Genius Bar tech was attempting to back up my Calendar & merge the 6 calendars, everything disappeared in his hand while he was looking at it.
I am hoping that some really good data recovery expert exists that can restore the calendar that was in both I-Phones yesterday. It is completely devastating if I can't recover it.
Any help, or referrals, is great appreciated!!!!
Thanks!

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Constant PCORP for Ledger !* does not contain any value

Dear SAP Guru's,
I have a user attempting to process a credit memo via t-code FB75 and is receiving the following error message while attempting to post the transaction.
Constant PCORP for Ledger !* does not contain any value
The user was able to post to other customer accounts but this one. The customer master looks fine.
POINTS AWARDED.
Thanks!

Hi,
Pls go to the following path
GL accounting(new)-business transaction-Doument Spiltting-Activate doument spiltting.
Praobaly you would have chosen the standary a/c assignment check box and constant.
That's y this error occured even i have got same error and it resolved now.

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

When i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

when i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is

was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

BIA recovery path for scenario not containing a backup

Similar Messages

Maybe you are looking for