BIA Server problem

Hi All,
In the monitor screen,under the details tab i see 'BIA server is overloaded ' but the requests are rolled up and available for reporting.
will it have an impact on the data in the reporting??
Thanks,
V.Singh.

Hi,
You have an elevated risk according to BWA best practices. You are receiving this alert because you are using more than 50% of the allocated memory in a given check point ( even if you pay 100% license you are supposed to leave 50% of the memory idle for temp indexes, query joins etc ) . This warning usually comes with many "number of memory unloads in the past 24 hours etc" warnings. But there is practically no impact to your reporting - this claim can be challenged by theoreticians.
You either take a risk and just keep monitoring it so that it won't get worse, or remove a cube or two from BWA. But definitely consider planning "logically partition" your cubes . This will allow you to control the growth of BWA. Say you have a revenue cube; every physical/fiscal year copy the cube to a new cube and start loading to new cube and add the new cube under multiproviders. The next year you remove the oldest cube from BWA and introduce the new one..
Besides this, look at the standalone Python tool to see the peek times. You may be just getting this warning in certain time window e.g while loading data to BWA and running information broadcasting queries at the same time..Or you may be running APD queries that used to cause a lot of issues - i am not sure if it's still the case.
Cheers
Tansu

Similar Messages

BIA Server problem - Data package not consistent

Dear All,
I have a strange issue with my BIA server. When I run the report by selecting top most nodes of the hierarchy.
Report ends up with message: No applicable data, and below error messages
Aggregates of ZFICSC22 were compressed. Data package is not consistent
Error while reading data, navigation is possible
The report works fine when I select the subsequent nodes (immediate lower nodes) of a hierarchy.
The report also works when I execute bypassing the BIA
I have cleaned up all the hierarchy buffer but the problem persists
As of now I am left out with last option which is rebuilding the indexes unless any one of you comes up with a better solution.
Thanks & Regards
Ziya
Edited by: Ziyauddin Mohammed on Dec 5, 2008 4:02 PM

Hi,
Have you implemented OSS Note 1163991?
There is nothing like data package compression in BIA.
Regards,
-Vitaliy
Edited by: Vitaliy on Dec 5, 2008 9:08 AM

BIA server over load problem

Hi Experts,
I have a problem wih our BIA sever overloaded and hence queries are getting terminated.
I had a check in the BIA monitor we have status red
Check for indexes loaded from the memory
Check size of trace files
BIA server is overloaded
all the above status are red
I am new BIA, can you guys please advise me on this how would I approach this and find a resolution.
Thank you.
Tati

It's difficult to advise on the forum, without seeing the system. And as well permanent fix may not be a one click task.
First thing to do: restart BWA system if possible. This would clean temporary indexes and unused indexes from the RAM. If your sizing was done correctly and you are running into overload issues - open a customer message to SAP Support - this never hurts.
Next thing: to analyze the memory consumption on particular blades, analyze the indexes, put procedures and place and so on.
If you are new to BWA and in charge of supporting it - get on BWA course. There are no shortcuts.
Regards,
-Vitaliy

BIA Server is Overloaded - part2

Good Day,
I know that there is already a thread about this problem, but it seems not to be resolved.
I understand that it could be a problem that the memory is out, but in my case it isn't
My example:
"The problem began when i execute the generation to a InfoCube with 7 billions of records.
In other case, after the overload problem, when i execute the generation of indexes for example 800 Millions records, it executes normal, but if i execute one smaller InfoCube, like 1 million records, then it writes in the log that the server is overloaded and can't continue and so on. Besides the help procedure that it gives, that have to delete all the indexes and restart the BIA server, it doesn't fix the problem."
My question: Is there a way for edit the .ini configuration files from BIA that it could eliminate this error notice or maybe something else?
I have the latest revision BIA v53, 3 Blades with enough memory =))
Thanks in advanced.

Hi, message is misleading.
Step one is and remains to verify the current utilisation through rsddbiamon2 -> trexadmin -> summary tab.
If this shows a value below 50%, have an extra look on the servers tab to check if one or more rfc-server have a high memory utilisation (normal 6 to 9%, in my last troubleshooting I had an rfc server running away with 48% of the memory ...).
When both are checked and no issues, then you can be pretty sure that you're looking into a faulty message, generated by memwatch-program. This program checks the response from all blades. When a blade doesn't return within xx mSec's you will get the message : BIA overloaded.
There can be quite some reasons why the response on memwatch layer is not within the limits : merge operations, intense reporting, reorg operation AND the issue mentioned above with the rfc server (and a loft more ..).
I didn't see the issue yet on version 53 will keep an eye on the customers where I have installed version 53 in the meantime.

How to fix "server problem" error message when trying to use PhoneGap build service.

I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
Loren

Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

[Fwd: Starting Managed server problem ......]

Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

Hello Satya/All,
I'm also experiencing the exact problem you are facing. It would be great if
somebody could help in this regard at the earliest.
Thanks, senthil
Satya Ghattu <[email protected]> wrote:
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted
CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create
an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due
to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

Photoshop CS2: name server problem: Is there a solution?

Hi!
I have Photoshop CS2. I can't start the program anymore because of the already well known name server problem... (DEAR ADOBE!! HOW COULD YOU!!! )
Now, what can I do? As far as I know I purchased the software for an unlimited amount of time (thanks to the fact that there weren't any clouds, halleluja!)
Can anybody help me, please? Is there a way "around"?
Thanks a lot!!!
Christiane

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I keep getting Server problems when trying to sign into messages

Hi can anyone help, I have an Imac, and Lion X 10.7.3, I have downloaded Messages Beta, evertytime I try to register it will not let me, telling me Server Problems try again later? Has anyone come across this? And can anyone help? Thank you.

Hi can anyone help, I have an Imac, and Lion X 10.7.3, I have downloaded Messages Beta, evertytime I try to register it will not let me, telling me Server Problems try again later? Has anyone come across this? And can anyone help? Thank you.

I recently updated Firefox and now it will not open. It says there is a proxy server problem.

I was requested to update the program and now it says there is a proxy server problem.

Hi:
You can try this COMPRESSOR TROUBLESHOOTING document:
http://docs.info.apple.com/article.html?artnum=302845
Hope it helps !
Alberto

Firefox periodically drops my Verizon/Yahoo email site indicating it cannot find the server. Verizon alledges there are no server problems.

My email page will crash and the message received is:Firefox can't find the server at us.mc844.mail.yahoo.com. Repeated reloading does not help. After a period of time from 5 minutes to an hour the site can be accessed and is Ok for several days. The the problem reoccurs several times in the same day. When my email provider is contacted they indicate no server problems.

Report your error messages so your peers, like me, can make suggestions..
Official recommendations are on http://help.yahoo.com/l/us/verizon/mail/ymail/basics/mail-12859445.html NOTE THE URL's Stick with them if using YAHOO. I have not found a newer recommendation for pop.yahoo.verizon.net that you mention, and the help page was updated this month.
Note some have had trouble with missing intermediate certificates so get encryption errors. Shouldn't happen (except if you are missing the root certificate, which is your responsibility), but can be fixed by installing manually.
Some have reported needing to specify [email protected] rather than just userid, I believe on the SMTP side. Normally you specify only userid and password without the @verizon.net.

Mail Server Problem

The mail server problem has been resolved, mail is working as designed....yeah!!

silly discusting board, I've got 3 replies in my email but it's not showing here ...
anyway, this time I found after some chasing my tail .... that the mail preferences had wiped my password and I needed to reinstall it, then instruct it to go online and some other click stuff ....
and it seems to be ok now ....
but each round in past 2 weeks has been different "fix" .... or wait ....
sorry for anyone without master email for 5 days, that's just not right ....
I'm afraid that as apple starts "giving away" email accounts to build the cloud into something much bigger than the mobile me was .... that their folo up will fail and we will find ourselves not with the same apple durability / consistency but with the "hey it's free" attitude ....
let's see

Email server problem - failed to connect to server

Since Friday 27th August I've been having trouble connecting to the email server for my BT Yahoo account. It simply can't find the server, even though none of the account settings have changed and it has worked fine for years. Weirdly, sometimes it works and emails come through (so the settings are obviously fine) but then it will stop working for no apparent reason. I use Thunderbird as my email client, but I tested the account in Outlook Express and it gives the same error. The account works fine over webmail, and through my iPhone, however.
It seems like this is a DNS error rather than software related - is there anything BT-related that could be causing this, or any simple fixes? I've tried rebooting the HomeHub but that doesn't seem to have made a difference. I work from home, so this is a really annoying problem.

Lynx wrote:
Interesting - we have exactly the same problem. Haven't been able to download for days. This has happened with two different computers with different anti-virus systems - so one assumes it's not suddenly that. I can access my e-mail online and reply (having to bcc myself, so when it does eventually work I have copies on my outlook express. It was working perfectly one night and the next morning just stopped - nothing happened in between.
I have tried to find out what the error number means, but no-one - not even BT's Help section - seem to have the solution. Have you ever seen the Eddie Izzard sketch on YouTube? This is definately one of those moments!
If you find a solution - would really appreciate you posting it on here, so I can fix mine. Will do the same for youi.
Hi.
This sort of problem is hard to determine. It could be a few things, including a corruption of the mail account (which can last for a short time or a number of days), it could be a local problem - which you've ruled out by the different computer check, or perhaps a "stuck" email - say one which is spam/virus attached and the online checking systems failing to pass through it, or possibly a stale IP address.
The latter 2 are easy to check, the first via webmail and see if there is anything near the "top" of the list that may cause a problem, moving to a new folder, and try again. The last can be tried by power cycling the router to get a new IP address. Disconnect the broadband and router for say 15 minutes and then reconnect to try again.
If there was a major server problem, there would be lots more complaints.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

TS4002 Anybody having icloud server problems today? No incoming mail

Dear all,
I'm not receiving any mail guz Icloud tells me it has a server problem. I can send mail but not receive any. I can send myself a message using gmail sending it to my own gmail adres and I receive in my Mail program, no problem, it's just the ME account that does not work on any of my apple devices. I've checked the setting in the prefference from the Mail program, they all seam normal......ANY tips???
Thank you so much,
Simon

Most inconvenient... trying to run a business and I made the mistake of using my me.com acct. for business rather than the old Yahoo acct. I haven't been able to receive email all day either.
Seeing that it's affecting less than 1% of it's customers, really is annoying for some reason.

Could Not Sign In: A server problem is blocking Apple ID sign in. Try signing in later.

After a successful iOS 5 upgrade to my iPhone 3GS, I began going through the setup wizard the phone takes you through upon initial use. However, I'm unable to make it past the part where you are supposed to "Sign In with an Apple ID". The steps to reproduce the problem are:
Click "Sign In with an Apple ID".
Per the "Have MobileMe and an ITunes Account?" instructions, I opt to type in my MobileMe e-mail address (e.g. [email protected]) and password.
Click "Next".
Specify birthday.
Click "Next".
Click "Agree".
Click "Agree" on popup.
A popup error is produced which reads "Could Not Sign In: A server problem is blocking Apple ID sign in. Try signing in later.".
Click "OK" which takes you back to the initial sign in screen.
I have tried logging in since 2am ET. It is now 8:17am ET. The server should not be down for over 6 hours. Any ideas?
Thanks in advance for any assistance offered!

Hi Natalie,
I was able to workaround this issue by clicking the "Skip" option on the first screen. Afterwards, I went back and manually entered my me.com Apple ID in Settings | iCloud and my iTunes Apple ID in Settings | Store. Doing it this way doesn't ask you to enter your birthday and I haven't yet found where that is supposed to be set. However, everything appears to be working correctly without it. Hope this helps!
Brad

BIA Server problem

Similar Messages

Maybe you are looking for