BIAR IMPORT UTILITY ERROR
I'm an Oracle DBA and VERY new to BOE and Data Integrator.
Have a VMWare setup. Win 2003 Std edition OS set with 1.5 GB RAM hosted on Windows Vista Business laptop with 3.5 GB RAM and 2.2 GHz processor.
Have Oracle 10.2.0.3 Enterprise Edition
BOE XI R3
BODI XI R3 with the 11.7.2.3 hotfix applied
On import of BIAR file receive an error message
failed to open the BIAR file failed to load class com/blah blah blah sdk
Also I receive a similar Java error message with running the BODI MetaData Integrator
Seems that the software is not loading the correct Java libraries. In the case of metadata issue, the cmsCollector.cmd script sets the JAVA_HOME variable.
The Java SDK was loaded with the BOE install.
I'm having a bit of a hard time envisioning where the error occurs exactly. I assume that you're using the Import Wizard to process the biar file?
A couple of bits that might shed light around the problem - in XIR2, the import wizard was a native fat application, and not java based, so the import wizard itself shouldn't be throwing any errors about loading the classes. Not sure if this has changed for XI 3 though. The biar file is essentially an archive, you can rename the extension to .zip and open using winzip to see if it's valid. If you can't open the archive, it could be corrupt. Try another biar file.
More likely is that the CMS or another component such as the File input server is throwing the error. If you run a -trace on each of those processes, it may show more detailed information about the problem. Also, you'll probably want to make sure that you're running on a stable and supported Java version. If you have several different versions it's possible that the wrong JRE is getting used. How is the rest of infoview working? Do you have problems opening reports in infoview? Exporting from Deski or Designer to the CMS?
I'm afraid that I can't comment about the DI Metadata integrator error.
Similar Messages
-
Please help on this MDS Export/Import utility Error.
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\Middleware\Oracle_IDM1\server\bin\weblogicExportMetadata.py" line 22, in?
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py", Line 237, in exportMetadata
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py", Line 733, in executeAppRunTimeMBeanOperation
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py", Line 996, in saveStackAndRaiseException
WLSTException:MDS-01160: Expecting absolute document reference. Reference "dboim-config.xml" is a relative reference to the document. MDS-91009: Operation "exportMetadata" failure. Use dumpStack() to view the full stacktrac.e
Please help me on this.
I am using following in the weblogic.properties file
application_name=oim
metadata_from_loc = C:\Oracle\Middleware\server\metadata
metadata_to_loc = C:\Oracle\Middleware\server\metadata
metadata_files=\db\oim-config.cml
Using weblogicExportMetadata.bat (Windows machine)Thanks Rajiv
Could see this entry in the MDS DB PATH_FULLNAME column -> /db/RA_HRDATASOURCEGTC41.xml
Updated this in Weblogic.properties file
1) application_name=OIMMetadata
2) metadata_files = /db/RA_HRDATASOURCEGTC41.xml
Tried with application_name = oim as well.
Still not getting the exported data
Thanks
Sudhakar -
Import Utility Without Duplication
I planning to export one Schema from an Oracle database (let say DB1) and I want to import it into another Oracle database (let say DB2). However, DB2 already has the exported Schema along with its contents (Tables and its data/records), but the data/records in the Tables is/are old. Therefore I want to import the data from DB1 into DB2 while ensuring that there will be no duplication in DB2, is that possible?
The reason for that because the mentioned Schema contains more than 1000 tables and it will be a hassle for me clearing all corresponding tables in DB2 before using the import utility.
I am running Oracle 9i R2 on Windows 2000 Server for both DBs.If data already exists at the target database, or at least the empty table, when you attempt to import to it you will receive duplicate rows since you must issue the import command with the IGNORE=Y clause.
You should clear all 1000 tables prior to performing the import, this is not a big deal, you don't have to manually do it, you can create a sql script out of sql to perform the truncate table command prior to performing the import.
One more option you have is to export with the query clause, if it is possible to find a key that let you find the subset of new rows at the source database, such as a primary key or an insert date column.
If you have primary keys on all target tables, then you can issue the import with the IGNORE=Y option, there will be plenty of errors at the time you perform the import, but these errors can be ignored as long as they refer to duplicated rows rejected by the primary key enforcement.
Another option is to evaluate using the merge command through db links.
~ Madrid -
I want to export data from 10g release 2 database and import it into the 11g database . The database structure varies ie most of the schemas thati need to import are new ones which dont exist in the 11g database.
When I do a full database export from 10g db and then do a full database import into 11g db using datapump import I face many errors like
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'SH' does not exist
Failing sql is:
GRANT WRITE ON DIRECTORY "LOG_FILE_DIR" TO "SH"So should I create the users in the target db before running the import since there are hundereds of new users and creating users will be a hectic job or did i commit any mistake in running the import utility ?Hi,
>>So should I create the users in the target db before running the import since there are hundereds of new users and creating users will be a hectic job or did i commit any mistake in running the import utility ?
I don't think so. Is there some problem in ran this command after the import operation?
GRANT WRITE ON DIRECTORY "LOG_FILE_DIR" TO "SH"Cheers
Legatti -
Import command error while importing in oracle 8i database.
Hi,
Trying to import a schema using imp utility in oracle 8i using sucessfully exported dump file in oracle 11g. But getting below errors.
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
Please provide any solution for this above error so that i can import a schema in Oracle 8i database.
Thanks.dump file created in 11g database can't be imported in lower 8i version.
Restrictions When Using Different Releases of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
Export dump files can be read only by the Import utility because they are stored in a special binary format.
Any export dump file can be imported into a later release of the Oracle database.
The Import utility cannot read export dump files created by the Export utility of a later maintenance release. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
Whenever a lower version of the Export utility runs with a later release of the Oracle database, categories of database objects that did not exist in the earlier release are excluded from the export.
Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
Thanks
Kuljeet Pal Singh
Edited by: Kuljeet Pal Singh on Mar 19, 2012 7:43 PM -
Problem with the Export/Import Utility when importing a .portal file
Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice. -
Import utilities - Error IMP-00017
Hi !
Anybody knows how i can fix this problem:
IMP-00017: following statement failed with ORACLE error 3113:
"CREATE INDEX "RC0101111" ON "RC010111" ("RC_FILIAL" , "RC_MAT" , "RC_PD" , "
""RC_CC" , "RC_SEMANA" , "RC_SEQ" , "R_E_C_N_O_" ) PCTFREE 10 INITRANS 2 MA"
"XTRANS 255 STORAGE(INITIAL 65536) TABLESPACE "DADOSIDX" LOGGING"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00021: operating system error - error code (dec 2, hex 0x2)
IMP-00000: Import terminated unsuccessfully
IMP-00021: operating system error - error code (dec 2, hex 0x2)
Sometimes when I'm importing tables, i get this error, but it's occur not in the same table.
Anybody has any ideia, how can i fix it ?
Thanks in advanced.
Gerson BeliniThe version that I'm using is 8.1.5.
I got the follow error, trying import the tables again:
IMP-00003: ORACLE error 600 encountered
ORA-00600: internal error code, arguments: [25012], [7], [0], [], [], [], [], []
IMP-00017: following statement failed with ORACLE error 20000:
"BEGIN DBMS_STATS.SET_INDEX_STATS(NULL,'SB10101',NULL,NULL,NULL,20888,470,2"
"0888,1,1,20888,2); END;"
IMP-00003: ORACLE error 20000 encountered
ORA-20000: Unable to set values for index SB10101: does not exist or insufficient privileges
ORA-06512: at "SYS.DBMS_STATS", line 1878
ORA-06512: at "SYS.DBMS_STATS", line 1970
ORA-06512: at line 1
Then the import utility import three or four table more, and generate the error again:
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00021: operating system error - error code (dec 2, hex 0x2)
IMP-00000: Import terminated unsuccessfully
IMP-00021: operating system error - error code (dec 2, hex 0x2)
If you can help me, I will thanks a lot.
Thanks in advanced.
Gerson Belini. -
Using the Import utility from other users and going to a different schema
I has a user today with rights
Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
We tried to utiile the import utility from OTHER USERS
Insert failed ORA-00942
Do you want ot ignore all errors
Even though we have rights to the schema under OTHER USERS.
When connected as the owner it works fine.I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
I'm using Oracle 11g and SD 2.1.1.64.
I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
Has anyone found a way to get around this issue yet? -
GroupWise Import Utility for Microsoft* Outlook* 7
Hello:
I have the following problem: Have client and server Groupwise 7 SP1
installed and two .PST files. I use import utility for import my pst
files to groupwise but i obtained error during the migration.
Groupwise client show Novell Groupwise Groupwise Exchange Archive (PST)
file has encountered a problem and needs to close.
Error Signature gwpstmig.exe ModName: gwmsp132.dll.
I can not import my pst file.Hi,
This tool is works great with emails but doesn't work with recurrent
appointments or tasks. The outlook contacts is imported as emails
message but it doesn't imported as contacts to groupwise contacts folder.
Regards
> [email protected] wrote:
>
> > I can not import my pst file.
>
> Try going to www.advansyscorp.com and download the Formativ Runtime
version
> and the Personal Outlook Converter. I think this will solve your
problem,
> and it's what I use for all stand-alone PST conversions these days.
>
> --
> Danita Zanre
> Novell Support Forums Volunteer
> GroupWise 7 Upgrade Guide!
> www.caledonia.net/gw7upg.html -
Use normal import utility or import datapump utility?
Hi all !
I have trouble with Spatial index when I import datafile into new database(11g ) : ORA-error Spatial Index cannot be created
I'm trying to find solution in Pro Oracle Spatial (11g) but they use normal 'Import Utility ' to import datafile into database .
So . I don't know if I can use ' import datapump utility ' to import Spatial index into new database ?
Thanks and Regard .This post is canceled by owner
-
IGNOREUniversalID keyword (Command Line Import Utility)
Hello,
I'm trying to import a MDL file with the command line import utility but the
import utility reports me an error because the keyword IGNOREUniversalID is
not recognized.
The next line appears in my parameters file
IGNOREUniversalID=Y
and Import Utility reports me
Error: MDL1116: Se ha encontrado la opci>n IGNOREUNIVERSALID no reconocida
Can you help me?
Thanks
Pedro GallardoHello Igor,
I'm using OWB 9.0.3.35.1 Client and OWB Repository 9.0.3.0.1
The MDL come from OWB Repository 9.0.2.0.0 but I've done an upgrade of the MDL file exported.
The import process do not begin because the IGNOREUniversalID keyword is not recognized
by imp.bat process.
Thanks
Pedro Gallardo -
Please help - Java.util Error! Have no clue! - Please Help
Hey guys,
Im very new to java,
With my code here :
import.java.util.Scanner;
public class delta{
public static void main(String args[]){
Scanner done = new Scanner(System.in.());
System.out.println(done.nextLine);
}I am unable to compile due to a Java.utill error!, can someone please tell me where i am going wrong? or provide me with a guide on how to setup netbeans because i think that is where i am going wrong !
-thanks!815788 wrote:
its
package <error>.java.util does not exist.it also doesn't let me compile because of this.And, to fill in the information you didn't yet post, this referred to your "import" line, right? Please don't hoard information. Tell us what the problem is.
As to the fix, look at your "import" statement and compare it to "import" statements in your textbook or tutorial or notes or whatever you're learning from. -
Hi friends,
I created the properties file for the database parameter.In the jsp file import util package and create the object using Resource Bundle and pass the all database parameter to object.it working fine in windows.
But in the Linex OS if i import the util package the extension is automatically changed from (.jsp) to (.txt) format.
properties file extension is also changed from (.properties) to (.txt) format.
so please do the need full.
Thanks&Regards,
Yousuf alam.AOMB+> OMBCONNECT $connect_string
Connected.
OMB+> OMBCC $project_name
Context changed.
OMB+> OMBCREATE TRANSIENT IMPORT_ACTION_PLAN 'I1'
Import action plan I1 is created.
OMB+> OMBALTER IMPORT_ACTION_PLAN 'I1' ADD ACTION 'PCKG-IMP' SET REF SOURCE PACKAGE $package SET REF TARGET ORACLE_MODULE $module
Import action plan I1 is altered.
OMB+> OMBALTER LOCATION $loc SET PROPERTIES (PASSWORD) VALUES ($pwd)
Location LOC altered.
OMB+>
OMB+> OMBIMPORT FROM METADATA_LOCATION FOR IMPORT_ACTION_PLAN 'I1'
PUB04201: Encountered an internal fatal error during processing of oracle module mod1: unsupported obj type.
OMB+> OMBREVERT
Revert complete.
OMB+> OMBDISC
Disconnected. -
FAILURE OF ORACLE IMPORT UTILITY
When i try running the oracle IMP utility(under the interactive mode) giving the user name,pwd and dump file the utility vanishes after a brief moment with out any interaction and the import process fails w/o any error message.The o/s is win 2k prof.and the import file
version is 8.1.7 and the target oracle version is also 8.1.7.Do suggest how this could be done successfullyThanx for info provided.
My oracle server 8.1.7 is on win2k o/s .Do elaborate further how i could do this step by step .I would appreciate this greatly.
Currently i click on the IMP utility available in the bin folder.The DOS window opens indicating that the program is an import utility.It prompts me for the username/pwd and the file to be imported.After giving the details it fails to read the .dmp file /.txt file .The default is expdat.dmp which is on the prompt.
Will i be able to read a .txt import file or is it Mandatory that it should be .dmp file,pl do clarify this too. -
Canon's Data Import Utility C100
Does anyone know where to download C100 Data Import Utility for C100? I just bought a used c100 that did not come with the disc and hoping to find out how to order a new one or if there is a download somewhere. Anybody out there think this is a must or can bypass with something like clipwrapper?
So I found a simple work around. I was having dificualty only downloading the VIDEO files, with no AUDIO becuase they are stored in 2 separt folders when recorded to the SD card from the c100. All you need to do is
sd > card reader > computer > [open folder via my computer]
EOS CANON C100 > PRIVATE > AVCHD > BDMV > STREAM (video files)
> CLIPINF (enables audio files to be interpreted in NLE's)
****STREAM (contains video file copy them to a new folder on your hard drive. Then the tricky part, also open the folder CLIPINF this folder holds files with the extension .CPI select all those and copy into the same folder you created for the video files. Then simply import the video files into a NLE's such as Premier Pro then your good to go!
Took me about an hour of frustration then I went back and just opened all the folders. Trial and error = Knowledge!
Enjoy hope this helps
Maybe you are looking for
-
Mapping Cust Mast XML (Generated from MDM) to IDOC
Question: I am having trouble mapping the KNVI segment (repeating node) to the Cust Master (DEBMAS) idoc. MDM does not support nested repeatable records (qualified records) on their end. I have the KNVI records generated (serially) in MDM. I want t
-
HT4651 Is Mac OS 10.7.3 vulnerable to DNSchanger Trojan malware?
Is Mac OS 10.7.3 vulnerable to DNSchanger Trojan Malware?
-
Why do I receive this warning when working with an ArrayList?
The warning I receive... Note: C:\Documents and Settings\Owner\.netbeans\4.1\Cis320\Lab6\src\scanPorts.java uses unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. The code it is reffering to... //fill the
-
Siri doen't work without apple headphones
Hi , so i just bought iphone 4S with IOS7 installed , and i notice that siri doesn't work without apple's headphone . i try to talk to her but she won't hear my voice.. she does only with headphones... is there any way to fix this issue ? Thanks.
-
Mass rename of every photo and sequential numbering of every future download
Is it possible to have iphoto 9.6 mass rename every single photo I have sequentially so there are no duplicate file names and then pull in every new photo no matter the source with sequential file names so there is never a duplicate?