Big help please: DC is not responding on host in hyperv

Hi i really need someone help
i have 2 host : host1 and host 2
i can connecto to host1
i cannot connect to host2 du to RPC error, i guess it's because my client and my server are not using the same login
host1 is using the same login on client and server
my domain controller is in host 2.
when im trying to change the host2 login to make it same as client it'says it can reach the DC.
so the host2 is down, the DC is down
how i can bypass the DC to change the login?
i have DC replica on host1 but i can start it cause it says the replication is on going , for that i need access host2 to stop it
1. i tried in powershell to stop the replication to my DC replicate didnt work
2. i tried to put host2 on workgroup in order to change login i cant cause it 's asking me for domain/admin to do so
i create another DC with another adress; i change host2 ip dnd adress but still it says cant reach the DC.
please help my host2 host the DC and i cant do anything without it
Thanks to help

Hi test12test,
Didk you try to use HVRemote to build the connection between "client" and "server" :
https://code.msdn.microsoft.com/windowsdesktop/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

HT201263 Hi. My Ipod Touch switched off in the gym during exercise. I tried all the troubleshooting hints but nothing helps. It is not responding and I tried to charge in various ways by different cables and computers and all is in vain. Can anyone help p

Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?

If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on

Help with the program not responding error

I just joined the CC and in Illustrator I keep getting "program not responding" please advise,
Eleanor

Do you have Tahoma and Verdana fonts enabled on your system?
Also see this other relevant link:
http://forums.adobe.com/thread/1309484
Nancy O.

HELP please! iphone not working because of 2.02 update!

So my phone is not working. AT ALL.
It just shows that I need to plug in my iphone cord and then an arrow that points to the iTunes icon. Then I've been doing that, but it prompts me in iTunes that I need to Restore. So I click restore and it says "contacting the iPhone software update server..." for 15 MINUTES now.
I am absolutely furious because I haven't been able to use my phone for 3 hours now and this is taking forever. It came out of nowhere.
I also have a stable internet connection. Is the iTunes store messed up right now? someone help please!

Sorry to hear about your problems...iTunes Store appears to be working properly right now. Did you already have the 2.0.2 update on the iPhone? If so, you should have the backup file in your computer under Users/(your user)/Library/iTunes/iPhoneSoftwareUpdates. If it isn't there, you should be able to download it from the apple site (I think). If not, you can install ANY version of the software by holding down the 'option' key while clicking 'Restore' (not sure which modifier key to hold in Windows)...this will bring you to a dialog box that will let you select a file...navigate to the above mentioned folder and choose the latest software you have. Good luck!!!

Does this help your "user did not respond" problem?

Here’s what was going on.
If I call a buddy #1 > I get the “user did not respond”.
If I call buddy #2 > I get “user did not respond”.
However, If I call buddy #3 it works right away, no problems what so ever.
This was a constant problem, the same result over and over again when attempting to connect.
Three out of the four of us have something in common
So, how come when I call buddy #1 and buddy #2 does iChat displays “user did not respond” ? Thinking about it, we all have multiple Macs (except buddy number 3) on a network and the same router. So it appears that when I try to call someone with more than one Mac on the network I get the error.
Again, all three of us had something else in common we were all using a DMZ service on the router to direct internet traffic to a Mac which was not running iChat (ie a server).
Time to experiment
Buddy #1 disabled DMZ then I called him.. nothing but the “user did not respond” message. I disabled DMZ (now both off us have DMZ off) I called him again (after restarting iChat) and it worked.
We both restarted iChat, Macs, Routers multiple times and it still worked 8 out of 10 times. Now, this is a huge improvement on failing to connect every-time. I did however remember reading somewhere about changing the default port number.
More Settings
The default port number iChat uses also stops my video and audio from working but this is easily fixed.
Open iChat and make yourself off line then navigate to:
iChat > Preferences > Accounts > Server Settings.
Change the default port to 443.
Close the window and make yourself available
iChat now connects to video and audio calls every single time.
So, for us it looks like disabling DMZ and changing the port number worked perfectly.
Instructions.
1. Quit iChat
2. Log into your router (enter the routers address in the address bar of your internet browser)
3. Look for a DMZ setting, possibly listed within the WAN SetUp section.
4. Disable DMZ
5. You may need to restart your router
6. Configure iChat's defualt port number (shown avbove)
7. Make your-self 'Available' on iChat
8. Start a video chat.
I would highly recommend that you pass this information on to your online buddies you wish to video or audio chat with. This configuration has to be set on both the caller's and and receiving buddies computer
Equipment used whilst I was testing
Myself: iMac G5 20'' - Integral iSight - Mac 10.4.6
Buddy #1: iMac Intel 20'' - Integral iSight - Mac 10.4.6
Buddy #2: iMac Intel 17'' - Integral iSight - Mac 10.4.6
Buddy #3: iMac Intel 17'' - Integral iSight - Mac 10.4.6
Netgear DG834 Modem/Router Firmware: V3.01.29
MacBookPro 17", G4 Powerbook 17", G5 quad, G5 iMac, G3, mac mini x4 Mac OS X (10.4.6) Good luck!

Hi Jan,
Some notes.
The Certain Buddy problem is almost certainly down to NAT issues.
DMZ is an extreme form of Port Forwarding and is therefore a NATted service on most devices.
Netgears are know to kave this problem with iChat even with the same model with the same firmware.
It means the problem continues in Port Forwarding, Port Triggering and DMZ.
UPnP (Universal Plug n Play) is not a NAT service so will get around this.
However there seems to be somthing quirky with Netgear's implemintation of this that needs it started up at least twice to work properly.
The need to change the port from 5190 to 443 normally occures on those devices and firmware that Port Forwards AND list protocols to open the ports which then lists port 5190 twice.
Changing the port in iChat and then disabling the Port forward on port 5190 TCP also should get around this problem.
9:52 PM Sunday; June 11, 2006

HELP SMTP_SUBMIT server is not responding

All 4 of my inbound mail servers (MTA) are throwing SMTP_SUBMIT server is not responding errors!
These are all Solaris 9 boxes using
Sun Java(tm) System Messaging Server 6.2-3.03 (built Jun 27 2005)
libimta.so 6.2-3.03 (built 01:16:06, Jun 27 2005)
SunOS msgmta-4 5.9 Generic_122300-38 sun4u sparc SUNW,Netra-240
I found other postings like this on this site, but they don't seem to apply to my servers. I checked the job_controller.log,
and it's empty.
The default log shows:
[23/Aug/2010:10:30:10 -0800] msgmta-4 msprobe[28092]: General Critical: SMTP_SUBMIT server is not responding
[23/Aug/2010:10:35:10 -0800] msgmta-4 msprobe[28545]: General Error: function=getserverresponse|port=587|error=failed to get server banner
I did the obvious thing and stopped msg and restarted it, however, this did not resolve the problem.

thank you. I found out from a co-worker that this was not the showstopper that I thought might have been the problem which turned out to be a hung process on one of the other servers. I thought that there was a way to mark this as resolved, but for some reason I am not finding it right now.

Ralph, help! (with "does not respond" message)

My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
Thanks in advance.
Juliette
iMac G5 Mac OS X (10.4.2)

Hi Juliette,
As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
If you have UPnP then use that as iChat can use this method.
Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
Only have one DHCP server on your network
Do not use Port Forwarding or Port Triggering twice (Or combo of them)
There is this on the Portforward.com site about Port Triggering for one version of a B90
http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
Local port 5678 need to trigger Global port 5060
Local port 5060 needs to trigger Global ports 16384-16403
Local 5190 Triggers 5910
Local 5222 Triggers 5220-5223 (jabber stuff)
Some Jabber logins are on port 5223 so
Local port 5223 triggers 5220-5222 if needed.
Ralph
Ralph

Help please flash will not install.

Hi tried all day to install flash on my first macbook. Tried everything. uninstalled, firewall is off, safari plug-ins enabled. Any help please?

Thank you to Mike M for your post in Oct 2013. Followed it and it worked first time. What a waste of a day.

I need help with my skype not responding. PLEASE H...

So Ive been having troubles with my skype for a while now and i havent gotten them to stop. Whenever i load up skype it just goes to a white blank window and doesnt respond until i end it in task manager. Any advice or help would be greatly appreciated as this has bothered me for a long time now.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Push Notification Issues Someone PLEASE Help IDK Why Everyones Not Responding Me!!

I have iPhone 5S thats new and it was glitchy from the beginning when I bought this..I used to have another iPhone 5S which I SHOULD HAVE kept!! Now, this phone push notifications from twitter don't pop up...only at times..what should i do??? i can't spend money for shipping fee to keep exchanging iPhones!! I tried doing ios restore and yes it did work BUT not for twitter..it only pops up at times and this NEVER happened on the previous phones!! I checked settings and everything was enabled. what should i do?? I'm VERY scared and worried!!! I'm begging you please someone help me! I don't have time left. Does this seem like a hardware problem??

What should I do if I already did a iOS restore once already couple days ago? Should I do it again? I'm worried if it's the device being loose somewhere in device or damaged

Please Help - bacbook pro is not responding after i tried to reset password

I tried to reset the admin password on my macbook pro and found the following suggestion online:
when i reboot, the desktop is not comming - it just sits there loading something forever.
Please help!!

This wouldn't be the right place to get help with this type of situation you would have better luck in the Using Mac OS X section... but this since you're here, try this
If you are able to get past the login window try this
1. reboot holding down Command S
2. type "/sbin/mount -uw /" with no qoutes
3. type rm -r "/Users/(your account short name)/Library/Caches" no qoutes. ie: rm -r /Users/eric/Library/Caches
4.type reboot
If you cannot get to the login window(stuck at a grey or blue screen) try this
This wouldn't be the right place to get help with this type of situation you would have better luck in the Using Mac OS X section... but this since you're here, try this
If you are able to get past the login window try this
1. reboot holding down Command S
2. type "/sbin/fsck -fy" when prompted with no qoutes
3. let it run till it finishs
4. type "reboot" with now qoutes
the last step would be to create a new account via single user mode. If the 1st two suggestions don't work come back and post and I'll post how to do that or give you a script that you can run in single user mode to do it for you (whichever you prefer)

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Help please :) with do not disconnect.

I disconnected my ipod and I still get that "Do not disconnect message" And it doesnt even flash.
Can somone please help me with this

Try Resetting your iPod. Hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display. Have a look at this link as well:
iPod won't turn on
iPod stops responding or will not waken from sleep

IPod Classic 80GB - "iTunes library cannot be saved you do not have enough access privileges for this operation" It says it has synced but it hasn't. Help please I am not very tech minded

iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.

See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock

Help Please Repeat Region not repeating all records only repeating 7 records

Hi all,
Please can you advise what's going on here - I'm building an
ASP SQL site and all was going well until my colleague pointed out
that the repeat region is not repeating all records as i've coded
it to using Dreamweavers Repeat region SB, it appears to be
defaulting to 7 repeats?????? I'm completely stuck as to why this
is - any help would be appreiated - I've attached the code -
The recordsets that i'm trying to repeat all on are -
menuone
livesubject
ArchiveSubject
Thanks for the help

Worry not i solved this problem, it's the thing about cutting
and pasting server behaviours in Dreamweaver MX 2004 - never works
properly - is CS3 any better??? a True review please --
Thanks

Big help please: DC is not responding on host in hyperv

Similar Messages

Maybe you are looking for