Big IDE and Asus K7M

Hi All.
I have mainboard Asus K7M and IDE HDDs 40 and 80 Gb.
The Solaris 8 x86 (1/01) can use this disks without problems. (It can understand the disk geometry, read/create partition tables and be installed on this disks)
I cannot instal Solaris 9 x86 (12/02) on my disks. This version and 8 x86 Early Access cannot read/write the partition tables of this disks.
The installation fails with the message "file system failed for fdisk partition c0d0p0".
Additionally I cannot mount the existing Solaris 8 x86 (1/01) installation.
Will the version 9 x86 (4/03) understand the disk geometry correctly?
What is the simplest way to fix the Solaris 9 x86 (12/02) installation and 1/2 CDs?
Regards!
Vit

Hi,
if you want to spend a month in learning how to work with an IDE, why not spending this month in learning java by only using an normal editor for programming purpose and reading the documentation and working with the tutorial and their examples?
If you do so, you can program in java after this month most of the things you need - with the IDE you will only be at the start of learning java in this place, never really knowing, what you are doing, if you don't take a look at that, what the IDE generates for you.
greetings Marsian
P.S.: with an IDE you will "learn" that you need it - but you don't need an IDE to program in java - all you need is an editor and the SDK. If you learn it with an IDE, I bet, you will feel lost, if only a normal editor is given to you to program.

Similar Messages

Best IDE and how-to create HTML for a swing Applet

Can you help me out? I've been using, and teaching with the old Symantec VisualCafe product from long, long, ago. It still works fine & I can even use it to build JFC/Swing Applets etc. But a few things have occurred. For one, a way back, Symantec sold VisualCafe to WEBGAIN - who now has gone out of business and sold it to a company called TOGETHERSOFT - who doesn't support it any longer.
This isn't really a big deal to me, because I can still build and deploy applets that are pre-swing easily enough. (as can my students)
HOWEVER... I'd like to be running with the LATEST Java (I think it's 1.4.01) and I'd LIKE to use whatever is the best development environment I can use - especially one I can recommend to my students. Do you know what that should be?
What's more, I'd still like to take some JFC/Swing created applets (even if compiled with the older VisualCafe IDE) and generate the HTML to allow 1.4 enabled browsers to run them (this is the case for the schools versions of Explorer and Netscape). Now, the HTML I have INSTALLED for the students used the HTML converter - back in 1.2 to produce the HTML at the bottom of this. This code no longer works now with current browsers. Do you know HOW one makes a jfc/swing compiled applet run on the latest browsers?
Any help or direction you can give would be appreciated.
thanks,
Bobby Berns
[email protected]
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 756 HEIGHT = 396 codebase="http://java.sun.com/products/plugin/1.2/jinstall-12-win32.cab#Version=1,2,0,0">
<PARAM NAME = CODE VALUE = "lottery.class" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.2">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.2" java_CODE = "lottery.class" WIDTH = 756 HEIGHT = 396 pluginspage="http://java.sun.com/products/plugin/1.2/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>



Bobby,
It's been a while since I've used the HTML Converter, but if I had to guess I'd say you need a newer version than what you have. Also, doesn't the converter allow you to choose which JDK you want to use (in which case you could select 1.4)? Again it's been a while so bear with me. Another option would be to put all the Swing classes into a .jar file (typically called swingall.jar) on your server and include that file as an attribute in your applet tag like this:
<APPLET CODE="yourApplet.class" ARCHIVE="swingall.jar">
This way you don't have to use the Java Plug-in, however the initial download time of the .jar file can be significant.
As for an IDE, I've always been happy using a text editor like UltraEdit. However, I've heard good things about Forte, and hey, it's free!
Regarding Christina's post, that solution will only work if the Applet does not use Swing components (and Bobby specifically said it does). By using the <OBJECT> and <EMBED> tags, rather than the <APPLET> tag, you force the browser to use the Java Plug-in (rather than the browser's default JVM).
Hope that helps,
- Sheepy

Remote Desktop Access with Mac and Asus Transformer Prime

I have an E2000 router with the most current firmware. I have a Sony VAio laptop with Windows 7 Home Premium 64bit,a Macbook with 10.6.8, and a new Asus Transformer Prime with ICS.My work desktop is a Dell Optiplex 380 with Windows 7 Pro 32bit. I frequently work from home and have no issues remoting into to my work PC from by Sony laptop via VPN and RDP.However I have never been able to connect successfully to my work PC with my Macbook(using Remote Desktop Connection 2.1 for Mac OS) or Asus tablet(using WYSE Pocket Cloud RDP app for Android). I can however connect to the VPN itself on the Macbook and tablet without issue same as my Windows laptop. The other interesting part is I can connect via RDP when I am connected to a Mi-Fi 3g hotspot. So it is definitely something in the my Linksys E2000 blocking the connection for some reason. I have even set Port forwarding of 3389 with the ip's of both the Macbook and Asus tablet.I have also tried connecting via ethernet to the router with the same outcome. I cannot ping my work pc from either device as well.In addition the firewall on my work PC is completely disabled and all services related to Remote desktop access are enabled and running.Does anyone have any ideas?

For my tablet its own ip assigned by the router. Same with the macbook.the Pocketcloud RDP app also uses 3389.I have port 3389 set for both internal and external port and protocol "both" under the Single Port Forwarding tab in the router config.

Problem with Audigy 4 and Asus m

I own an Asus A8V motherboard, and just purchased the audigy 4 non-pro. While playing the game F.E.A.R. (main reason I bought the soundcard) with acceleration to the max, I will receive a BSOD (blue screen of death) with the 0x0000007F error code. When I turn the acceleration down 2 notches ( above the lowest) I am able to play the game without getting a bluescreen, but I will hear sounds a second or 2 after an event so this is a big problem, and have screeching problems on some ma
ps.
I've heard that some Asus mobo's and the newer Creative cards have issues, any way to fix? I'm using the latest drivers for both my mobo and my sound card.

Please can someone help?

Web developer needed (big idea)

like the title say's that im(jims) looking for a gifted coders or a coder with a bunch of experince to help me build my idea from ground up. i have the basic tools that's needed, i also have the skills to run this idea. but i need to build the fire before i can cook right just a joke.but my idea is the next big thing and social media networks,the next facebook,the next twitter the next big thing to come yes you dont belive me but you think im joking hmm, yes but the difference between me and facebook i came up with this idea on my own. and im guessing you thinking he wanna build a social network and my answers is yes and no my idea is very simply i want to connect people ideas together.
my dream goals is to connect people ideas and to share thems with the world or the buyers. yes i just said buyer because this idea is almost like a (buysellads.com/)
where people connect through ads. funny right enough talks let me fully explain my idea.
what i have done already
bought domain
and will buy hosting ( a cloud hosting so we can handle the traffic.)
when you start as my coder i wont be able to financial pay you right away because im very low and income at the moment but this will all be changing soon
as the coder of this company you will have 20% of all shares and stock when it go viral.
what will happen when you finish coding.
i will take it from there and handle all the dirty work of ranking the website and making it go viral for 100s and 10000s.
how will i do this
i have 2years of seo experince and i also work as a freelancer back and the days ranking website and ranking lawyers website and firm website for extremly hard keywords.
why i think you should code for us
i belive you should consider coding for us because you never know what lie ahead you never know you could of be the one that made this dream come true because with out a coder this wont work as it should and if it happen to be the next thing you be the one that help it get there.
[Personal details deleted by moderator]

Do you kmow where you are posting this? This is Adobe Business Catalyst http://www.ez-1.net/partner See that video? The coding is done. The hosting is included. All you need to do is sign up and upgrade your account within 30 days to add your domain and go from there.

Big Bang and GD65 (8D) PCI Loading

I am trying to compare the Big Bang and GD65 (8D) for a hypervisor.
My plan is to have two different video cards. One would require a x16 slot, the other would be OK in a x8. Now, I would like to determine how to best configure the drives and an extra NIC.
I am expecting 8 drives, 6 SSD and two HDD. 4 of the SDDs are for the host and 3 VMs, the other 2 are for buffering the 2 HDs. This four-set, it seems, have to be on the onboard SATA3 to use the hardware caching feature. For this, either board would seem to work. Then the other 4 SSDs can be serviced with a discrete 4 port SATA for the GD65 or a 2 port for the BB. The onboard SATA, I would guess, have dedicated PCI lanes. But when a card is added, do all the ports share the cards lane? So the item I am stuck on is whether the x8 slots for the GD65 will comprimise the SATA's through put for simultaneous access.
What would be a good setup?
ray

HU16E,
Wow, that was an eye opener. Thank you for the details.
So the best I could hope for would be to use the two Intel ports for a RAID cache, and then have a controller card to pick up another two ports that can be configured as the Intel. Am I getting close?
1) Is there any advantages for putting the 2 HDDs and 2 SSD on the same card versus splitting them to on board and discrete card?
2) Is there slot arrangement trade-offs to coordinate the need for speed on the SATA3 ports and the one high end graphic controller?
I did not realize that caching the HDD was a RAID function. But I have not been able to locate an online description (RAID #). I have found a variety of proprietary solution white papers but no details.
Any idea what I can look for to learn more about this?
ray

Adobe ideas and Adonit Jot Touch 4.0

Hello,
Could we please get an update about IF and if so WHEN the Adonit Jot Touch 4.0 will be supported in Adobe Ideas?
Thank you!
Regards,

I too am wanting the Jot 4 stylus support. I have bought both it and the POGO and have evaluated them both on my iPad and iPad-mini.
In general I prefer the Jot 4 a lot more as it has a much finer ponit and you can see right where you are touching the surface. The Pogo tip is so big you can never see where you are touching. That is all feedback for the Pogo team though. I only meantion it becasue if you are going to support a device I think you would want to support the more functional of the two. Hopefully you can support both in the long run. Using Ideas is a great starting point for a lot of my work that I end up doing in AI and PS. The folks at Jot 4 said they have provided you with the SDK for their device.
Another item on the Pogo is it really isn't functioning on the iPad mini. They had to do some kind of work around, but you have to press really hard to get it to do a line. It works ok on the iPad.
So on to Ideas itself.
Palm rejection:
One bug I notice is when you have palm rejection on you can still mark your work by point touching it. say with your finger tip or knuckle. Your pinkie knuckle in particular tends to touch your work a lot and it will leave a point spot. I thought with palm rejection only your stylus would mark the work.
Multi Touch:
Not being able to multi touch pan and zoom on the fly while you are using your stylus is not good at all. Having to contantly select the palm button everytime to pan or zoom your work is so prohibitive that using the stylus in a connected mode is almost not worth it. That and given the palm rejection doesn't really work either as pointed out above then the only advantage you are left with when using the stylus is line width pressure control, which is almost not worth it. I find I end up turning it off just so I can work more productively.
On the fly functions:
The on the fly functions would be a lot more functional if they were user defined. I think more people would prefer an undo than say an opcacity control.
In the end I think you have created a great prodcut with Ideas and it opens up a lot of potential with hand drawn vector art, which is huge.
In the end I would hope you are able to get it on Android.
More to the point I hope you get it working with the Jot 4 stylus. It is just so much more of an elegant and functional tool that gets the highest reviews and ratings of any device.

X-Fi Titanium Fatal1ty and Asus P6T6 WS Revolution

2X-Fi Titanium Fatalty and Asus P6T6 WS Revolution? Hello,
I have a very strange problem with my Creative Audio Card (X-Fi Titanium Fatalty) and my new mainboard (ASUS P6T6 WS Rev).
The system works perfectly well and fast. As soon as I install the Creative X-Fi card, the system (Vista 64-Bit) becomes extremely slow. I used slot6 which is X58 PCI-e 4x and should be sufficient but I also tried any other PCIe slot of the board. With the card installed, vista boot takes approx 0 minutes and the whole system is laggy, the card however is detected properly. If I remove the card, everything is back to normal. Latest drivers didn't change anything. Of course, I disabled onboard audio when I installed the card but it doesn't matter whether onboard audio is enabled or not. New Vista installation didn't help either (in fact the installation is already slow when the card is installed). I messed with all kind of bios settings but nothing really hel
ps.
The card worked and still works fine in my old PC. Any ideas?

fixed.Mainboard bios upgrade solved the [email protected]

890FXA-GD65 with AMD Phenom II 1100T and Asus Radeon 6950 No Video Signal

I just did a new computer build with an MSI 890FXA-GD65 motherboard AMD Phenom II 1100T processor and Asus Radeon 6950 graphic card.
I have a SATA hard drive and optical drive. Memory is Corsair XMS3 4GB PC10666 DDR3 1333MHz 4096MB.
When I turn the system on I have no video signal so I can't see bios. I tried taking everything apart and rebuilding and still nothing.
The power is on to the motherboard and graphic card. The motherboard has 2 LED indicators on.
I am a newbie with the new computer build and need some help. I accidentally pressed the clear CMOS while the power was on. I have no idea if this is going to mess up the motherboard.
Any help will be greatly appreciated. Thanks.
Mike

I could not locate this on this specific motherboard. The one issue is that there is a CLR CMOS button on the back and I pressed this when power was on .
I know there is another way to clear the cmos with the jumpers but I didnt do that .
Anyway motherboard still powers up. I took it to a tech to check it out. Don't know anything as of yet. Thanks.

HELP ME IN step by step installation for sap 4.7 IDEAS AND sap 4.7 EE

HI
EXPERTS CAN ANYBODY GIVE STEP BY STEP INSTALLATION PROCESS FOR BOTH
SAP 4.7 IDEAS AND EE VERSIONS I AM NOT THAT MUCH PROFICIENT IN INSTALLING I HOPE U R GUIDLINES CAN MAKE ME CLEAR IN INSTALLING I HAVE SOME QUESTIONS RATHER THAN THIS TO ANSWER
1.IS THE ISTALLATION PROCESS OF ALL SAP VERSIONS ARE SAME?
2.WHAT IS AN OBJECT IN SAP?
3.WHAT IS THE DIFFERENCE BETWEEN COMPOSITE ROLE AND A DERIVED ROLE?
YOU CAN SEND ANSWERS TO MY MAIL ID:<b>[email protected]</b>
THANK YOU TO ALL IN ADVANCE

Hey Rajesh,
answers:
1) Yes, the installations procedures is almost the same for all SAP versions, however its advisible to use follow the installation guides which comes with the DVD or is also available in SAP marketplace..
2) Object is SAP is almost everything in Sap.
object could be anything like
TABLES
PROGRAMS
VIEW
FUNTTION MODULES
DOMAIN
DATA ELEMENT
STRUCTURE
and so on
3)Composite role is the combination of two or more roles(be it 2 or more single roles or combination of two or more composite roles or permutation of single and composite role).. whereas derived roles can inherit all authorization objects from the parent role and can have its own authorization objects as well..
Hope this clears your doubts.
Revert for any clarifications..
Please reward for usefull post.
Regards,
Anand.

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

Script crashes IDE and Flash Player but works in browsers

I'm building a game program and I've got a script that loads
an external swf, and then duplicates the clip for the user to play.
It worked until a few days ago when I reinstalled my OS (Mac OS
10.4.11) to fix an unrelated problem. The strange thing is that I
had reinstalled the browser plugin to fix a related problem. Now
the code works in the browser, but crashes the IDE and the Flash
Player every time. I called Adobe Support but they were no help
since it's "project related." I've reinstalled CS3 and Flash
itself, but nothing helps.
Here's the code that crashes:
// INITIALIZE LOADER AND ADD TO STAGE
var myLoader:Loader = new Loader;
addChild (myLoader);
myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE,
isLoaded);
// DUPLICATE CLIP WHEN LOADED
function isLoaded (event:Event):void {
event.target.content.width = 100;
event.target.content.height= 200;
// THIS IS THE LINE THAT CRASHES
var copyClass:Class =
Object(event.target.content).constructor;
var newThing:DisplayObject = new (copyClass);
addChild (newThing);
newThing.x +=50;
myLoader.load (new
URLRequest('coloring/coloring1.swf'));

See this cool mp3 xml player with visualization, playlist and
skins. Fully customisable. Vector.
http://flashden.net/item/mp3-xml-strongplayerstrong-with-visualization-and-skins-vectorise d/11851

Can any body please give me an idea and the Import and Export process?

Can any body please give me an idea and the Import and Export process? Excise Duty and other duties and so on.
I will be highly obliged for the help.
Regards,
Subhasish

for importing material,every importer has to file bill of entry in customs.
first vendor send some documents like certificate of origine , bill of lading, packing list etc to importer.
on the basis of those documents,importer makes supporting documents like duty calculation sheet, GATE declaration form,CHA declaration form,insurance certificate.
CHA (custom house agent ) file the bill of entry on behalf of impoter in customs.
custom verify it.
after duty payment, CHA can clears the consignment from custom.
there are two typs of BOE.
1 Home consumption BOE
2 Warehousing BOE
in 1st type of BOE , payment of duty is done at the time of custom clearance
and in 2nd type of BOE, importer can put material in warehouse without payment of duty. at time of using those material from warehouse,importer has to file out bond warehouse BOE and pay the all duties.

Any need for conversation from big endian and little endian?

Hi,
I am planning to migrate an Oracle 9i Database on AIX 5.3 to Oracle 11g R2 Windows 2008, and have planned to use transportable tablespace. But prior to that task is the conversation required from big endian and little endian using RMAN?
Appreciate any suggestions, comments and hints
Thanks

Hi,
Check V$TRANSPORTABLE_PLATFORM, it shows the ending for each supported platform. Given the results on my 11g, I suspect that you'll have to convert the tablespaces...
SYSTEM@oracle11 SQL>select *
2   from V$TRANSPORTABLE_PLATFORM
3 ;
PLATFORM_ID PLATFORM_NAME                                                                                         ENDIAN_FORMAT
          7 Microsoft Windows IA (32-bit)                                                                         Little
          6 AIX-Based Systems (64-bit)                                                                            Big
          8 Microsoft Windows IA (64-bit)                                                                         Little
         12 Microsoft Windows x86 64-bit                                                                          LittleHtH
Johan

Big IDE and Asus K7M

Similar Messages

Maybe you are looking for