Billing Doc with over 200 item lines, wont post to FI

Hi there i have a F2 billing doc with 209 lines on it, this will not post to FI as it is trying to post over 999 lines into FI, has anyone overcome this issue if so how did you do it?
If not what are my options, i have customers who want monthly bills but this bill i have created is only for 2 weeks worth.
Is there away of having multile FI docs again one billing doc?
Hope you can help me out
(this question is also in ERP-SD & FI section)

hi,
you have to set up summarization of the line items. Please see note 36353.
If your business process does not allow this, the only possibility is to split the invoice.
Balazs

Similar Messages

  • Cancel billing doc with Accounting doc clearing

    Dear gurus ,
    the scenario is that  we have a billing doc with wrong pricing and the relative accounting doc has cleared status,then we use VF11 to cancel the billing doc , the system give the information  "Document #### saved (no automatic clearing)" .Message no VF216 .
    My question is,  based on the new cancellation function module AC_DOCUMENT_REVERSE, as note 1259505 description (The most evident effect of the new cancellation procedure is the automatic clearing of the accounting documents.), is that legal or illegal ,the system cancel the billing doc without checking the status of the related accounting doc ?
    IF that is the standard reaction ,how can I make some change or config to make sure that ,the billing doc with cleared  accounting doc can't not be cancelled without reseting the status of accounting doc to "not cleared"?
    Thanks in advance ,
    Ryan
    Edited by: deyi chen on Jun 8, 2011 5:03 AM

    Hi,
    In my scenario system still cancel the invoice which is cleared but should not any accounting impact of canceled invoice
    Even if you try to release manually by VF02 the massage will appear
    Automatic clearing of billing document 12345
    and canc. doc. 17777 not poss.
    If don't want to allow creation of cancel invoice if origin invoice is cleared then do some enhancement.
    Kapil

  • BAPI_BILLINGDOC_CREATEMULTIPLE, creating a Bill doc with a single line item

    Hi there,
    I am trying to create a Billing document with reference to Sales document using this BAPI (BAPI_BILLINGDOC_CREATEMULTIPLE)
    ..but the generated billing document is creating only single line item where as the original Sales document is containing a Two line items, ie. 1 main line item an a Sub line item for this .
    I am passing the Values mentioned below..
    As per requirement is need to create a Pre invoice or a Proforma with Provided Sales Document.
    it_billingdata_in-ORDBILLTYP =  Proforma/Preinvoice
    it_billingdata_in-REF_DOC =  Reference Sales doc number
    it_billingdata_in-REF_DOC_CA = Reference Sales document category('C').
    Can some one please suggest any thing else do i need to pass apart of these field..
    Appreciate of some one answer me.
    thanks
    Srinivas

    Hi Srinivas,
    You need to loop on the internal table 'it_billingdata_in' based on the Sales Order line items and pass the value to 'it_billingdata_in-REF_ITEM' for every line item of the Sales Order.
    Hope this helps.
    Regards,
    Pranav.

  • Why the doc total amount is not matched with the total item line amount?

    Hi,
    Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components.  [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
    Has anyone experienced similar situation like mine and how this happens?
    Thanks,
    Lan

    I am having this same issue and I have additional information.
    I am on ver. 8.8 PL 16.
    Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update.  Most of the time this does not work, though.  I end up having to restart the SAP client and then everything begins to work as it should.
    This behavior is occuring on mulitple machines in our office.
    Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem.  In fact, we were having issues with Currency Rounding and did turn it off not long ago.  Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
    Randy Davis
    Denver, CO
    Edited by: Randy Davis on May 16, 2011 2:01 PM

  • Report for payment due billing doc with taxes

    Hi All,
    I want the report for payment due billing documents with following fields and after payment is done( F-28 )  that document should not appear in the report for the said period.
    Billing date, Billing doc no, Net value, Tax Amount
    Thanks and regards,

    Dear Swarup
    You have to table join in SQVI - VBRP  for Billing date, Billing doc no, Net value, Tax Amount and BSEG  for payment updation details.
    Take the help of ABAPer and develop a zee report to fulfill the requirement.
    thanks
    G. Lakshmipathi

  • Report for Billing doc with payment status and tax details

    Hi All,
    I want the report for payment due billing documents with following fields and after payment is done( F-28 ) that document should not appear in the report for the said period.
    Billing date, Billing doc no, Net value, Tax Amount
    Thanks and regards,

    Dear,
    Check S_ALR_87012172,S_ALR_87012186,S_ALR_87012168, S_ALR_87012197, S_ALR_87012173, S_ALR_87012174.
    Regards,
    Mahesh Wagh

  • Move next/previous buttons in a region with over 100 items

    Hi,
    Is there a way to show items in a region in chunks and then have a move next/previous buttons. I have a region on a page that has over 100 items how can I show 10 items a time and then have move next/previous buttons. I am using 10.1.2.0.2
    Thanks

    In the "what to search" tab, select the pagegroup where stands your page.
    below teh pagegroup selection you got an option named "Which pages should be searched?"
    Browse to your page.
    Leave the search criterias blank (so taht the portlet won't make any filter)
    In the "results display" tab, select the pagination.
    Now, your portlet will display all items on your page.
    The best way to use it is to put all your items on page1.
    Create a page2 with only this portlet configured to serach for all items on page1.
    In your portal, just make a link to page2.
    hope this will be helpfull.

  • Numerous billing doc. with same delivery no.

    Hi Experts,
    Kindly suggest me on the following issue:-
    If I create a sales order for 100 kg-> delivery 100 kg -> billing 100 kg ,release it to accounting.
    Then if I create another billing document for same delivery no. system does not allow.This is standard process.ok
    But my question is
    If I create a sales order 100 kg -> delivery 99 kg -> billing document 99 kg,release to accounting.
    Then If I create another billing document for same delivey ,system allow me to create another billing documet with 99 kg & also allow for release to accounting,
    I can create numerous billing documents for 99 kg with same delivery.
    Please suggest how to prevent this behaviour.
    I have checked the forum and my setting also in copy control for delivery to billing.
    Billing quantity     B
    Pos./neg. quantity   +
    Pricing type         C
    Thanks in advance.
    Regards,
    Dharminder dalal

    Hi Dharmender
    The setting you have in the copy control fo rthe item Pos./neg. quantity + means that
    entries in the document flow table (ie: subsequence billing documents) are flagged
    with '+' in the VBFA table for billing documents linked to the original sales order.
    For a regular sale this PLMIN '+' entry is required
    The system uses the PLMIN field to calculate the status of the items and sets an appropriate
    status for the sales document in tables VBUK and VBUP.
    If you have a Qty of 100 in a sales order and you deliver 99 then the billing status in VBUK and
    VBUP will be set to 'B' correctly because you have one undelivered item.
    There could be 2 cases how you are able to create multiple billing documents for one
    delivery.
    1) You have not set the PLMIN flag in the copy control TVCPF. Without this the billing status
         of the documents will not be updated adn you can create as many duplicates as you like
    2) The customising is correct and the status tables are updated correctly according to the
         qty posted in the subsequent documents. You have VBUK-FKSTK ='C' but your copy routine
         does not check the correct fields so you can create subsequent billing documents despite the
         fact it is already billed.
    If you go to the billing copy routines in VOFM look at 003 and 004 you can see there the checks that are
    carried on on the VBUP and VBUK tables
    Kind regards
    Brian

  • Posting a billing doc with a past date

    Hi Friends,
    I have a requirement to post a billing doc to accoutnts with a past date i.e  posting date < system date .
    Is that possible ?
    Regards
    Mahesh.

    Hi Mahesh,
    Posting date in billing document gets copied from the actual goods issue date in the deluvery document.
    Ideally your goods issue and billing should be done in the same posting period.
    If you are aware of all these and still wants to change then during creation of billing doc, you can goto billing header data and input your date(billing date).
    Regards
    Karan

  • Report for PGI & billing value with reference to SO Line item

    Dear all,
    Please guide me whether there is any standard report available to check the PGI value and billing at a time with reference to a sales order (line item).
    Thanks & regards.
    Pranab

    as far as I know there is NO such standard report.
    you would try to build sap query based on VBAK/VBAP using VBFA checking LIKP/LIPS and VBRK/VBRP...
    but you may request abaper for more professional report with MKPF/MSEG and BKPF/BSEG

  • Bill Plan with Sales Order item rejected

    Milestone Billing Plan created.
    IMG Config Sales Order Item Reason for Rejection = BIC checked (Not Relevant for Billing)
    Add material on the (Billing Plan) Sales Order Item.
    Set the Item Reason For rejection (same reason as set in IMG config for BIC above)
    Create some Billing Plan dates (at the sales order header).
    [F3] back. You get an info message "Value-based differences in the billing plan cannot be allocated"
    Save the Order.. All is fine.
    If I do not set a reason for rejection on the item all is fine.
    Can anyone explain this ?

    Hi Friends
    I have resolved the problem myself. I have used sap note : 97272 and downloaded the utility/ correction program ZZUNREJE and ran it for rejected sales line item.
    The reason for rejection was successfully reversed without touching any of the associated POs.
    Regards

  • Does cross-damain SSO scalable to work with over 200 different domain?

    Hello
    Has anyone successfully implement multi-domain SSO with this scalability?
    thanks

    Hi Surendar,
    cross domain support is from security point not a proper solution.
    The ITS issues a MYSAPSSO2 cookie. The cookie specification says that the browser rules who is getting cookies. Normally only site with the corresponding DNS name will get.
    Possible solution would be:
    If you switch your application, the service which creates the ticket must be connect with another DNS name. Your DNS server allows to configure aliases. So just connect your WebServer with WGate with this new (alias) name, then you will get a cookie with another entry in DOMAIN property of the cookie.
    See ITS parameters:
    http://help.sap.com/saphelp_webas620/helpdata/en/4b/0c00273d6d11d480aa00c04f99fbf0/frameset.htm
    regards,
    -markus

  • Tax amount line item with Business area in Billing Doc generating to A/cing

    Hi,
    While generating the Billing Doc, for the Tax amount line item , the Business area shd be populated. How this can be done? while  for the othter line items it is displaying but not for the tax amount line item.

    In ECC 6.0 with document splitting and new GL business area would be available in the general ledger view for tax postings. For earlier versions than ECC 6.0 use balance sheet adjustment program SAPF180 to populate business area for tax items.
    Thanks and regards
    Kedar

  • Details from Billing doc line item in COPA

    Hi,
    We are posting billing docs with multiple ship-to parties on the different line items. In COPA I need to get hold of the ship-to party. There are no sales orders created in the process.
    In neither the derivations (KEDR) nor in the user-exit am I able to get hold of the billing doc line item nr, as that is what I need to determine the ship-to party from the VBRP table.
    Any ideas on how I can pick up the ship-to party from the billing doc?
    Thanks in advance
    Piet Strydom

    HI,
    Thanks for your response.
    Yes, we have ship-to party at the line-item level. Technically it is stored on VBPA, but the access into VBPA is the billing doc and line item number.
    I have not been able to find good (SAP) documentation for exit COPA0005, but what I did find warned against changing characteristics? That should be done in COPA0001. However, the RBELN and RPOSN fields are not populated yet.

  • BAPI for billing doc. creation with ref to outbound delivery

    Hi,
    I'm looking for BAPI to create pro forma invoice billing doc with red. to outbound delivery.
    I have tried using BAPI_BILLINGDOC_CREATEMULTIPLE entering the outbound delivery as ref. document and all other required data. Pro forma is create but pricing is not copied since the bapi considers the delivery number as external doc.
    It seems that BAPI_BILLINGDOC_CREATEMULTIPLE is designated to billing doc. with ref to sales orders
    Would appreciate any suggestions,
    Assaf

    Hi,
    In Function Module initial screen, there is no input parameter. Directly choose execute.
    system will give the create billing document screen enter delivery document number and execute.
    Why are using BAPI  to create billing document with reference to delivery document.
    you can create background job for billing through VF06.
    Regards,
    Chandrasekhar.S

Maybe you are looking for