Bin grouping probllem
I have the following code
WITH a AS ( SELECT ( LEVEL * 100 ) + LEVEL r
FROM DUAL
CONNECT BY LEVEL < 500)
SELECT MIN ( r ) minn
,MAX ( r ) maxn
,MAX ( r ) - MIN ( r ) gdiff
,TO_NUMBER ( SUBSTR ( r, 1, 1 ) ) * POWER ( 10, LENGTH ( TRIM ( TO_CHAR ( r ) ) ) - 1 ) gseg
FROM a
GROUP BY TO_NUMBER ( SUBSTR ( r, 1, 1 ) ) * POWER ( 10, LENGTH ( TRIM ( TO_CHAR ( r ) ) ) - 1 )
ORDER BY gseg;
for the rows I get back I am trying to do the following.
I want to break down strarting frmo the leftmost digit to th riight most digit in each group I want to get common values ranges.
For Example:
if my range looks like
10,19,9,10
I would be able to get just 1 as a result because all 10,11,12,13,14,15,16,17,18,19 start with a 1 and the whole range is covered. this the smallest common number I get.
If I had a row like
20,24,4,20
I would see that this is only 20,21,22,23,24 and so have all five rows because the range is not complete.
if I have a row like
1000,1700,700,1000
I would like rows liek 100,110,120,130,140,150,160,1700.
1700 is 4 digits because it does not have a complete range for 17xx.
All help is appreciated.
Hi,
Hi,
Whenever you have a question, it helps to post:
(1) The version of Oracle (and any other relevant software) you're using
(2) A little sample data (just enough to show what the problem is) from all the relevant tables. In this case, I'm not sure the 3 sets you already mentioned give a very clear picture of what you want. Maybe you should add a few more examples.
(3) The results you want from that data
(4) Your best attempt so far (formatted)
Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
Formatted tabular output is okay for (3). Type these 6 characters:
{code}
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
smklad wrote:
if my range looks like
10,19,9,10
I would be able to get just 1 as a result because all 10,11,12,13,14,15,16,17,18,19 start with a 1 I'm confused. 9 doesn't start with 1.
If I had a row like
20,24,4,20
I would see that this is only 20,21,22,23,24 and so have all five rows because the range is not complete.What part does 4 play in this result? If none, why not?
if I have a row like
1000,1700,700,1000
I would like rows liek 100,110,120,130,140,150,160,1700.
1700 is 4 digits because it does not have a complete range for 17xx.Why are all the numbers in the output smaller than any of the numbers in the input? It seems like most of them were divied by 10. Why 10? Why not 100?
Try to explain a different way.
Similar Messages
-
Favorite Effects Bins??
Do we have a simple inside FCP X way to create favorite effects bins/groups yet or are we still stuck doing the Motion re-publisihg workaround?
Ahhhhhhhhrrrgh......
-
Oracle DB offline after server reboot / hardware failure
Hi,
We have a server that crashed due to hardware failure and although brought back up OK Oracle DB's are no longer mounting. I am not a DBA but it looks bad to me and it seems there are no backups. Can anyone suggest a course of action? This is Oracle 11G XE running on Centos 6. I have put as much detail in as I can and could really do with some advice.
[root@627963 trace]# sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 12 23:18:26 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> connect sys as sysdba;
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2233344 bytes
Variable Size 893389824 bytes
Database Buffers 167772160 bytes
Redo Buffers 5541888 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 10571
Session ID: 62 Serial number: 3
SQL> startup /nomount
SP2-0714: invalid combination of STARTUP options
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
Alert_XE.log:
Thu Sep 12 21:26:18 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions = 180
memory_target = 1G
control_files = "/u01/app/oracle/oradata/XE/control.dbf"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "/u01/app/oracle/admin/XE/adump"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Thu Sep 12 21:26:20 2013
PMON started with pid=2, OS id=21388
Thu Sep 12 21:26:20 2013
"alert_XE.log" 342L, 17231C
Thu Sep 12 21:26:20 2013
PSP0 started with pid=3, OS id=21390
Thu Sep 12 21:26:21 2013
VKTM started with pid=4, OS id=21392
VKTM running at (100ms) precision
Thu Sep 12 21:26:21 2013
GEN0 started with pid=5, OS id=21396
Thu Sep 12 21:26:21 2013
DIAG started with pid=6, OS id=21398
Thu Sep 12 21:26:21 2013
DBRM started with pid=7, OS id=21400
Thu Sep 12 21:26:21 2013
DIA0 started with pid=8, OS id=21402
Thu Sep 12 21:26:21 2013
MMAN started with pid=9, OS id=21404
Thu Sep 12 21:26:21 2013
DBW0 started with pid=10, OS id=21406
Thu Sep 12 21:26:21 2013
DBW1 started with pid=11, OS id=21408
Thu Sep 12 21:26:21 2013
DBW2 started with pid=12, OS id=21410
Thu Sep 12 21:26:21 2013
LGWR started with pid=13, OS id=21412
Thu Sep 12 21:26:21 2013
CKPT started with pid=14, OS id=21414
Thu Sep 12 21:26:21 2013
SMON started with pid=15, OS id=21416
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
MMON started with pid=17, OS id=21420
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Thu Sep 12 21:26:21 2013
MMNL started with pid=18, OS id=21422
starting up 4 shared server(s) ...
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Thu Sep 12 21:26:21 2013
ALTER DATABASE MOUNT
Thu Sep 12 21:26:24 2013
Sweep [inc][21794]: completed
Sweep [inc][21793]: completed
Sweep [inc2][21794]: completed
Successful mount of redo thread 1, with mount id 2707110077
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Sep 12 21:26:25 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
Started redo scan
Completed redo scan
read 93 KB redo, 34 data blocks need recovery
Started redo application at
Thread 1: logseq 241, block 21190
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
Mem# 0: /u01/app/oracle/fast_recovery_area/XE/onlinelog/o1_mf_1_8kxhwjco_.log
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22593):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70, kcbs_dump_adv_state()+946] [flags: 0x0, count: 2]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22594):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20130912212627], requested by (instance=1, osid=21440), summary=[incident=22593].
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
PMON (ospid: 21388): terminating the instance due to error 397
System state dump requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
System State dumped to trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_diag_21398.trc
Dumping diagnostic data in directory=[cdmp_20130912212628], requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
Instance terminated by PMON, pid = 21388
Thu Sep 12 21:39:03 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions = 180
memory_target = 1G
control_files = "/u01/app/oracle/oradata/XE/control.dbf"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "/u01/app/oracle/admin/XE/adump"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Thu Sep 12 21:39:05 2013
PMON started with pid=2, OS id=2483
Thu Sep 12 21:39:05 2013
PSP0 started with pid=3, OS id=2489
Thu Sep 12 21:39:06 2013
VKTM started with pid=4, OS id=2546
VKTM running at (100ms) precision
Thu Sep 12 21:39:06 2013
GEN0 started with pid=5, OS id=2550
Thu Sep 12 21:39:06 2013
DIAG started with pid=6, OS id=2552
Thu Sep 12 21:39:06 2013
DBRM started with pid=7, OS id=2554
Thu Sep 12 21:39:06 2013
DIA0 started with pid=8, OS id=2556
And the tracefile:
Trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe
System name: Linux
Node name: <blah>
Release: 2.6.32-358.14.1.el6.x86_64
Version: #1 SMP Tue Jul 16 23:51:20 UTC 2013
Machine: x86_64
Instance name: XE
Redo thread mounted by this instance: 1
Oracle process number: 24
Unix process pid: 21440, image: <blah>(TNS V1-V3)
*** 2013-09-12 21:26:25.858
*** SESSION ID:(62.3) 2013-09-12 21:26:25.858
*** CLIENT ID:() 2013-09-12 21:26:25.858
*** SERVICE NAME:() 2013-09-12 21:26:25.858
*** MODULE NAME:(<Blah> (TNS V1-V3)) 2013-09-12 21:26:25.858
*** ACTION NAME:() 2013-09-12 21:26:25.858
Thread 1 checkpoint: logseq 241, block 2, scn 8960531
cache-low rba: logseq 241, block 21190
on-disk rba: logseq 241, block 21377, scn 8979221
start recovery at logseq 241, block 21190, scn 0
*** 2013-09-12 21:26:25.869
Started writing zeroblks thread 1 seq 241 blocks 21377-21384
*** 2013-09-12 21:26:25.870
Completed writing zeroblks thread 1 seq 241
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 93Kb in 0.01s => 9.13 Mb/sec
Longest record: 2Kb, moves: 0/242 (0%)
Change moves: 2/26 (7%), moved: 0Mb
Longest LWN: 8Kb, moves: 0/57 (0%), moved: 0Mb
Last redo scn: 0x0000.00890313 (8979219)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 34/34 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 377/542 = 0.7
*** 2013-09-12 21:26:25.872
KCRA: start recovery claims for 34 data blocks
*** 2013-09-12 21:26:25.873
KCRA: blocks processed = 34/34, claimed = 34, eliminated = 0
*** 2013-09-12 21:26:25.874
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
*** 2013-09-12 21:26:26.055
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Incident 22593 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident 22594 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFFHi Guys,
I have copied a backup script below that it turns out has been running every night at midnight. Where does this go, how do I know if it has worked and how can I use it to restore?
#!/bin/sh
# The script assumes that user can connect using "/ as sysdba" and Flash
# Recovery Area is enabled.
# =================
# Backup procedure
# =================
# For database in NoArchiveLog mode, database is shutdown and an offline
# backup is done;
# For database in Archive log mode, online backup is done.
# During the backup procedure, the script stores flash recovery area
# location by saving complete initialization parameter to
# ?/dbs/spfile2init.ora file. This will be used during restore operation
# to find Flash Recovery Area location. If this file is lost, then user must
# enter Flash Recovery Area location during restore operation.
# Two backups are maintained in Flash Recovery Area and the corresponding
# log files for last two backup job are saved in
# $HOME/oxe_backup_current.log and $HOME/oxe_backup_previous.log
user=`/usr/bin/whoami`
group=`/usr/bin/groups $user | grep dba`
if test -z "$group"; then
if [ -f /usr/bin/zenity ]
then
/usr/bin/zenity --error --text="$user must be in the DBA OS group to backup the database."
elif [ -f /usr/bin/kdialog ]
then
/usr/bin/kdialog --error "$user must be in the DBA OS group to backup the database."
elif [ -f /usr/bin/xterm ]
then
echo "Operation failed. $user must be in the DBA OS group to backup the database."
echo -n "Press any key to exit"
read userinp
fi
exit 0
fi
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export PATH=$ORACLE_HOME/bin:$PATH
TMPDIR=/tmp
rman_normlog=${TMPDIR}/rman_normlog$$.log
#Fix a logfile for current, previous run and spfile2init.ora
sqlplus /nolog > $rman_normlog << EOF
connect / as sysdba;
set echo off;
set head off;
set serveroutput on;
set linesize 515;
declare
l1 varchar2(512);
begin
l1 := dbms_backup_restore.normalizeFilename('spfile2init.ora');
dbms_output.put_line('-----------------');
dbms_output.put_line(l1);
dbms_output.put_line('-----------------');
end;
EOF
rman_spfile2init=`grep "spfile2init.ora$" $rman_normlog`
rm -f $rman_normlog
rman_backup_current=$HOME/oxe_backup_current.log
rman_backup_prev=$HOME/oxe_backup_previous.log
#Choose a temporary log for this run
rman_backup=${TMPDIR}/rman_backup$$.log
echo XE Backup Log > $rman_backup
#Check if flash recovery area is enabled
rman_fra=${TMPDIR}/rman_fra$$.log
sqlplus /nolog > $rman_fra << EOF
connect / as sysdba;
set head off;
set echo off;
set trimspool on;
set linesize 512;
select '$' || count(*) || '$' from v\$parameter
where upper(name)='DB_RECOVERY_FILE_DEST'
and value is not null;
EOF
fra=`grep "^$.*$" $rman_fra`
rm -f $rman_fra
if [ X$fra = X\$1\$ ]; then
failed=false;
else
failed=true
errstr="flash recovery area is not enabled"
fi;
if [ $failed = 'false' ] ; then
#Check the mode of database
rman_log_mode=${TMPDIR}/rman_log_mode$$.log
sqlplus /nolog > $rman_log_mode << EOF
connect / as sysdba;
set head off;
set echo off;
set trimspool on;
set linesize 512;
select '$' || log_mode || '$' from v\$database;
EOF
mode=`grep "^$.*$" $rman_log_mode`
rm -f $rman_log_mode
case $mode in
\$ARCHIVELOG\$)
echo "Doing online backup of the database."
rman target / >> $rman_backup << EOF
set echo on;
configure retention policy to redundancy 2;
configure controlfile autobackup format for device type disk clear;
configure controlfile autobackup on;
sql "create pfile=''$rman_spfile2init'' from spfile";
backup as backupset device type disk database;
configure controlfile autobackup off;
delete noprompt obsolete;
EOF
if [ $? = 0 ]; then
failed=false;
else
failed=true
errstr="RMAN error: See log for details"
fi;
rman target / >> $rman_backup << EOF
sql 'alter system archive log current';
EOF
\$NOARCHIVELOG\$)
echo "Warning: Log archiving (ARCHIVELOG mode) is currently disabled. If"
echo "you restore the database from this backup, any transactions that take"
echo "place between this backup and the next backup will be lost. It is"
echo "recommended that you enable ARCHIVELOG mode before proceeding so "
echo "that all transactions can be recovered upon restore. See the section"
echo "'Enabling ARCHIVELOG Mode...' in the online help for instructions."
echo "Backup with log archiving disabled will shut down and restart the"
echo -n "database. Are you sure [Y/N]?"
gotit=false
while ! $gotit; do
read userinp
if [ "$userinp" = "Y" -o "$userinp" = "y" -o \
"$userinp" = "n" -o "$userinp" = "N" ]; then
gotit=true
fi
done
if [ "$userinp" = "n" -o "$userinp" = "N" ]; then
rm -f $rman_backup
exit -1;
fi
echo "Backup in progress..."
rman target / >> $rman_backup << EOF
set echo on;
shutdown immediate;
startup mount;
configure retention policy to redundancy 2;
configure controlfile autobackup format for device type disk clear;
configure controlfile autobackup on;
sql "create pfile=''$rman_spfile2init'' from spfile";
backup as backupset device type disk database;
configure controlfile autobackup off;
alter database open;
delete noprompt obsolete;
EOF
if [ $? = 0 ]; then
failed=false;
else
failed=true
errstr="RMAN error: See log for details"
fi;
errstr="Unknown database mode $mode"
failed=true;
esac;
fi;
#Save the error string in the log
if [ $failed = 'true' ]; then
echo ${errstr}. >> $rman_backup
fi;
#Save the last run as previous
if [ -f $rman_backup_current ]; then
mv -f $rman_backup_current $rman_backup_prev
fi;
#Save the current run
mv -f $rman_backup $rman_backup_current
#Display the result to user
if [ $failed = 'true' ] ; then
echo '==================== ERROR ========================='
echo ' Backup of the database failed '
echo '==================== ERROR ========================='
echo ${errstr}.
echo Log file is at $rman_backup_current.
else
echo Backup of the database succeeded.
echo Log file is at $rman_backup_current.
fi
#Wait for user to press any key
echo -n "Press ENTER key to exit"
read userinp -
Reports Builder won't start (iDS 9.0.4 on RHEL 3.0)
I have just completed a fresh install of Developer Suite 9.0.4 on RedHat Enterprise Linux 3.0. The Forms builder (f90desm) runs fine but the Reports builder (rwbuilder) gives the error below. This server also has Oracle 9i DB and the Forms and Reports install from Application Server 9.0.4 on it in seperate Oracle homes.
$./rwbuilder.sh
java.lang.VerifyError: class org.omg.PortableServer.AdapterActivatorPOA overrides final method .
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at com.inprise.vbroker.orb.ORB.adapterManager(ORB.java:1101)
at com.inprise.vbroker.ds.DSUser.<init>(DSUser.java:282)
at com.inprise.vbroker.ds.Init.init(Init.java:20)
at com.inprise.vbroker.orb.ORB.installServices(ORB.java:922)
at com.inprise.vbroker.orb.ORB.initialize(ORB.java:831)
at com.inprise.vbroker.orb.ORB.set_parameters(ORB.java:950)
at org.omg.CORBA.ORB.init(ORB.java:337)
at oracle.reports.utility.Utility.createORB(Utility.java:1693)
at oracle.reports.server.InProcessServer.init(InProcessServer.java:108)
at oracle.reports.server.InProcessServer.run(InProcessServer.java:91)
at java.lang.Thread.run(Thread.java:534)Thanks for the quick response. I'm not sure what you mean by jdk1.4 being at the beginning of the path. Do you mean the $PATH environment varible or the $LD_LIBRARY_PATH environemnt varible or something else?
Currently my environment variable are as follows:
oracle@devacctdb-89% env
TERM=xterm
HOME=/home/oracle
SHELL=/bin/tcsh
USER=oracle
LOGNAME=oracle
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin:/opt/kde3/bin:/home/oracle/DevSuite-9.0.4/bin:/home/oracle/DevSuite-9.0.4/jre/1.4.2/bin
HOSTTYPE=i386-linux
VENDOR=intel
OSTYPE=linux
MACHTYPE=i386
SHLVL=1
PWD=/home/oracle/DevSuite-9.0.4/bin
GROUP=dba
HOST=devacctdb
REMOTEHOST=10.55.16.122
LS_COLORS=
G_BROKEN_FILENAMES=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
LANG=en_US.UTF-8
SUPPORTED=en_US.UTF-8:en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
LANGVAR=en_US.UTF-8
HOSTNAME=devacctdb
ORACLE_HOME=/home/oracle/DevSuite-9.0.4/
ORACLE_SID=acct
LS_OPTIONS=
EDITOR=vi
LD_LIBRARY_PATH=/home/oracle/DevSuite-9.0.4/lib:/home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/:/home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/native_threads/:/home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/server:/home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/client
DISPLAY=snackster:0.0
running rwbuilder directly gives a different error message than running it with the rwbuilder.sh wrapper script. The error from that is as follows:
oracle@devacctdb-154% ./rwbuilder
Unexpected Signal : 11 occurred at PC=0xB72A0EC8
Function=(null)
Library=/home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/server/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
Dynamic libraries:
08048000-0808d000 r-xp 00000000 08:11 4366335 /home/oracle/DevSuite-9.0.4/bin/rwbuilder
0808d000-080a3000 rw-p 00044000 08:11 4366335 /home/oracle/DevSuite-9.0.4/bin/rwbuilder
9bfec000-9c0a7000 r--s 00000000 08:11 3581457 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/ext/localedata.jar
9c0a7000-9c0b4000 r--s 00000000 08:11 3581456 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/ext/ldapsec.jar
9c0b4000-9c0b7000 r--s 00000000 08:11 3581455 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/ext/dnsns.jar
9c0b7000-9c0d3000 r--s 00000000 08:11 3581454 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/ext/sunjce_provider.jar
9c859000-9ca59000 r--p 00000000 08:01 3286764 /usr/lib/locale/locale-archive
b2dc5000-b330d000 r--s 00000000 08:11 4431627 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/charsets.jar
b330d000-b331e000 r--s 00000000 08:11 4431596 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/jce.jar
b331e000-b33f6000 r--s 00000000 08:11 4431604 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/jsse.jar
b33f6000-b340c000 r--s 00000000 08:11 4431595 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/sunrsasign.jar
b3456000-b4b33000 r--s 00000000 08:11 4431629 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/rt.jar
b4b33000-b4b47000 r-xp 00000000 08:11 4431574 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libzip.so
b4b47000-b4b4a000 rw-p 00013000 08:11 4431574 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libzip.so
b4b4a000-b4b6a000 r-xp 00000000 08:11 4431572 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libjava.so
b4b6a000-b4b6c000 rw-p 0001f000 08:11 4431572 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libjava.so
b4b6c000-b4b7c000 r-xp 00000000 08:11 4431571 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libverify.so
b4b7c000-b4b7e000 rw-p 0000f000 08:11 4431571 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/libverify.so
b4b7e000-b4b82000 rw-s 00000000 08:01 3974120 /tmp/hsperfdata_oracle/24446
b4b82000-b4b8d000 r-xp 00000000 08:01 523301 /lib/libnss_files-2.3.2.so
b4b8d000-b4b8e000 rw-p 0000a000 08:01 523301 /lib/libnss_files-2.3.2.so
b4c0b000-b4c1b000 r-xp 00000000 08:11 4284692 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libverify.so
b4c1b000-b4c1d000 rw-p 0000f000 08:11 4284692 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libverify.so
b4c1d000-b4c21000 r-xp 00000000 08:01 376216 /usr/X11R6/lib/libXtst.so.6.1
b4c21000-b4c22000 rw-p 00004000 08:01 376216 /usr/X11R6/lib/libXtst.so.6.1
b4c22000-b4c75000 r-xp 00000000 08:11 4284687 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libmlib_image.so
b4c75000-b4c76000 rw-p 00052000 08:11 4284687 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libmlib_image.so
b4c76000-b4c96000 r-xp 00000000 08:11 4284678 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libjava.so
b4c96000-b4c98000 rw-p 0001f000 08:11 4284678 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libjava.so
b4c99000-b4f64000 r-xp 00000000 08:11 4284670 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libawt.so
b4f64000-b4f7a000 rw-p 002ca000 08:11 4284670 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libawt.so
b4f9f000-b4fb3000 r-xp 00000000 08:01 376176 /usr/X11R6/lib/libICE.so.6.3
b4fb3000-b4fb4000 rw-p 00013000 08:01 376176 /usr/X11R6/lib/libICE.so.6.3
b4fb6000-b4fbd000 r-xp 00000000 08:01 376180 /usr/X11R6/lib/libSM.so.6.0
b4fbd000-b4fbe000 rw-p 00007000 08:01 376180 /usr/X11R6/lib/libSM.so.6.0
b4fbf000-b4fc0000 r-xp 00000000 08:11 4284680 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libjawt.so
b4fc0000-b4fc1000 rw-p 00000000 08:11 4284680 /home/oracle/DevSuite-9.0.4/jdk/jre/lib/i386/libjawt.so
b4fc1000-b50f3000 r-xp 00000000 08:01 1324518 /lib/tls/libc-2.3.2.so
b50f3000-b50f6000 rw-p 00131000 08:01 1324518 /lib/tls/libc-2.3.2.so
b50f9000-b510b000 r-xp 00000000 08:01 523285 /lib/libnsl-2.3.2.so
b510b000-b510c000 rw-p 00011000 08:01 523285 /lib/libnsl-2.3.2.so
b510e000-b511b000 r-xp 00000000 08:01 376192 /usr/X11R6/lib/libXext.so.6.4
b511b000-b511c000 rw-p 0000c000 08:01 376192 /usr/X11R6/lib/libXext.so.6.4
b511c000-b5123000 r-xp 00000000 08:01 376206 /usr/X11R6/lib/libXp.so.6.2
b5123000-b5124000 rw-p 00006000 08:01 376206 /usr/X11R6/lib/libXp.so.6.2
b5124000-b5200000 r-xp 00000000 08:01 376182 /usr/X11R6/lib/libX11.so.6.2
b5200000-b5203000 rw-p 000db000 08:01 376182 /usr/X11R6/lib/libX11.so.6.2
b5204000-b5251000 r-xp 00000000 08:01 376214 /usr/X11R6/lib/libXt.so.6.0
b5251000-b5255000 rw-p 0004c000 08:01 376214 /usr/X11R6/lib/libXt.so.6.0
b5255000-b53dc000 r-xp 00000000 08:01 376312 /usr/X11R6/lib/libXm.so.2.1
b53dc000-b53ef000 rw-p 00186000 08:01 376312 /usr/X11R6/lib/libXm.so.2.1
b53f0000-b53f8000 r-xp 00000000 08:11 4431564 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/native_threads/libhpi.so
b53f8000-b53f9000 rw-p 00007000 08:11 4431564 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/native_threads/libhpi.so
b53f9000-b5406000 r-xp 00000000 08:01 1324522 /lib/tls/libpthread-0.60.so
b5406000-b5407000 rw-p 0000c000 08:01 1324522 /lib/tls/libpthread-0.60.so
b5409000-b542a000 r-xp 00000000 08:01 1324520 /lib/tls/libm-2.3.2.so
b542a000-b542b000 rw-p 00020000 08:01 1324520 /lib/tls/libm-2.3.2.so
b542b000-b542d000 r-xp 00000000 08:01 523281 /lib/libdl-2.3.2.so
b542d000-b542e000 rw-p 00001000 08:01 523281 /lib/libdl-2.3.2.so
b542f000-b5431000 r-xp 00000000 08:11 4431952 /home/oracle/DevSuite-9.0.4/lib/libwtc9.so
b5431000-b5432000 rw-p 00001000 08:11 4431952 /home/oracle/DevSuite-9.0.4/lib/libwtc9.so
b5432000-b54d1000 r-xp 00000000 08:11 4431868 /home/oracle/DevSuite-9.0.4/lib/libnnz9.so
b54d1000-b54d8000 rw-p 0009e000 08:11 4431868 /home/oracle/DevSuite-9.0.4/lib/libnnz9.so
b54d8000-b5bdb000 r-xp 00000000 08:11 4431998 /home/oracle/DevSuite-9.0.4/lib/libclntsh.so.9.0
b5bdb000-b5c02000 rw-p 00702000 08:11 4431998 /home/oracle/DevSuite-9.0.4/lib/libclntsh.so.9.0
b5c10000-b5c15000 r-xp 00000000 08:11 4431877 /home/oracle/DevSuite-9.0.4/lib/libutsl90.so.0
b5c15000-b5c16000 rw-p 00004000 08:11 4431877 /home/oracle/DevSuite-9.0.4/lib/libutsl90.so.0
b5c16000-b5c27000 r-xp 00000000 08:11 4431879 /home/oracle/DevSuite-9.0.4/lib/libutl90.so.0
b5c27000-b5c29000 rw-p 00010000 08:11 4431879 /home/oracle/DevSuite-9.0.4/lib/libutl90.so.0
b5c29000-b5c31000 r-xp 00000000 08:11 4431881 /home/oracle/DevSuite-9.0.4/lib/libutj90.so.0
b5c31000-b5c32000 rw-p 00007000 08:11 4431881 /home/oracle/DevSuite-9.0.4/lib/libutj90.so.0
b5c33000-b5c39000 r-xp 00000000 08:11 4431878 /home/oracle/DevSuite-9.0.4/lib/libutc90.so.0
b5c39000-b5c3a000 rw-p 00005000 08:11 4431878 /home/oracle/DevSuite-9.0.4/lib/libutc90.so.0
b5c3a000-b5c3c000 r-xp 00000000 08:11 4431937 /home/oracle/DevSuite-9.0.4/lib/libdfc90.so.0
b5c3c000-b5c3d000 rw-p 00001000 08:11 4431937 /home/oracle/DevSuite-9.0.4/lib/libdfc90.so.0
b5c3d000-b5c53000 r-xp 00000000 08:11 4431923 /home/oracle/DevSuite-9.0.4/lib/libuat90.so.0
b5c53000-b5c55000 rw-p 00015000 08:11 4431923 /home/oracle/DevSuite-9.0.4/lib/libuat90.so.0
b5c55000-b5c6a000 r-xp 00000000 08:11 4431917 /home/oracle/DevSuite-9.0.4/lib/libros90.so.0
b5c6a000-b5c6b000 rw-p 00014000 08:11 4431917 /home/oracle/DevSuite-9.0.4/lib/libros90.so.0
b5c6b000-b5c7d000 r-xp 00000000 08:11 4431915 /home/oracle/DevSuite-9.0.4/lib/libror90.so.0
b5c7d000-b5c7e000 rw-p 00011000 08:11 4431915 /home/oracle/DevSuite-9.0.4/lib/libror90.so.0
b5c7e000-b5c91000 r-xp 00000000 08:11 4431916 /home/oracle/DevSuite-9.0.4/lib/librod90.so.0
b5c91000-b5c93000 rw-p 00012000 08:11 4431916 /home/oracle/DevSuite-9.0.4/lib/librod90.so.0
b5c95000-b5c9a000 r-xp 00000000 08:11 4431826 /home/oracle/DevSuite-9.0.4/lib/libixd90.so
b5c9a000-b5c9b000 rw-p 00004000 08:11 4431826 /home/oracle/DevSuite-9.0.4/lib/libixd90.so
b5c9b000-b5cb9000 r-xp 00000000 08:11 4431824 /home/oracle/DevSuite-9.0.4/lib/libix90.so
b5cb9000-b5cbb000 rw-p 0001d000 08:11 4431824 /home/oracle/DevSuite-9.0.4/lib/libix90.so
b5d9f000-b5dac000 r-xp 00000000 08:11 4431794 /home/oracle/DevSuite-9.0.4/lib/libutt90.so.0
b5dac000-b5dad000 rw-p 0000c000 08:11 4431794 /home/oracle/DevSuite-9.0.4/lib/libutt90.so.0
b5dad000-b5dae000 r-xp 00000000 08:11 4431804 /home/oracle/DevSuite-9.0.4/lib/libtknqap90.so.0
b5dae000-b5daf000 rw-p 00000000 08:11 4431804 /home/oracle/DevSuite-9.0.4/lib/libtknqap90.so.0
b5daf000-b5dd6000 r-xp 00000000 08:11 4431795 /home/oracle/DevSuite-9.0.4/lib/libuia90.so.0
b5dd6000-b5dd9000 rw-p 00026000 08:11 4431795 /home/oracle/DevSuite-9.0.4/lib/libuia90.so.0
b5dd9000-b5de7000 r-xp 00000000 08:11 4431793 /home/oracle/DevSuite-9.0.4/lib/libuiimg90.so.0
b5de7000-b5de8000 rw-p 0000d000 08:11 4431793 /home/oracle/DevSuite-9.0.4/lib/libuiimg90.so.0
b5de9000-b5df4000 r-xp 00000000 08:11 4431798 /home/oracle/DevSuite-9.0.4/lib/librec90.so.0
b5df4000-b5df5000 rw-p 0000a000 08:11 4431798 /home/oracle/DevSuite-9.0.4/lib/librec90.so.0
b5df5000-b5e46000 r-xp 00000000 08:11 4431797 /home/oracle/DevSuite-9.0.4/lib/libree90.so.0
b5e46000-b5e49000 rw-p 00050000 08:11 4431797 /home/oracle/DevSuite-9.0.4/lib/libree90.so.0
b5e49000-b5e7f000 r-xp 00000000 08:11 4431796 /home/oracle/DevSuite-9.0.4/lib/librem90.so.0
b5e7f000-b5e81000 rw-p 00035000 08:11 4431796 /home/oracle/DevSuite-9.0.4/lib/librem90.so.0
b5e81000-b5ea0000 r-xp 00000000 08:11 4431806 /home/oracle/DevSuite-9.0.4/lib/libot90.so.0
b5ea0000-b5ea1000 rw-p 0001e000 08:11 4431806 /home/oracle/DevSuite-9.0.4/lib/libot90.so.0
b5ea1000-b6014000 r-xp 00000000 08:11 4431799 /home/oracle/DevSuite-9.0.4/lib/libuimotif90.so.0
b6014000-b6027000 rw-p 00172000 08:11 4431799 /home/oracle/DevSuite-9.0.4/lib/libuimotif90.so.0
b6028000-b6075000 r-xp 00000000 08:11 4431800 /home/oracle/DevSuite-9.0.4/lib/libuipr90.so.0
b6075000-b6078000 rw-p 0004c000 08:11 4431800 /home/oracle/DevSuite-9.0.4/lib/libuipr90.so.0
b607a000-b60ce000 r-xp 00000000 08:11 4431805 /home/oracle/DevSuite-9.0.4/lib/libuc90.so.0
b60ce000-b60d1000 rw-p 00053000 08:11 4431805 /home/oracle/DevSuite-9.0.4/lib/libuc90.so.0
b60d1000-b60d3000 r-xp 00000000 08:11 4431801 /home/oracle/DevSuite-9.0.4/lib/libuihx90.so.0
b60d3000-b60d4000 rw-p 00001000 08:11 4431801 /home/oracle/DevSuite-9.0.4/lib/libuihx90.so.0
b60d4000-b618c000 r-xp 00000000 08:11 4431846 /home/oracle/DevSuite-9.0.4/lib/libvgs90.so.0
b618c000-b6190000 rw-p 000b7000 08:11 4431846 /home/oracle/DevSuite-9.0.4/lib/libvgs90.so.0
b6190000-b61ad000 r-xp 00000000 08:11 4431895 /home/oracle/DevSuite-9.0.4/lib/libmmcm90.so.0
b61ad000-b61ae000 rw-p 0001c000 08:11 4431895 /home/oracle/DevSuite-9.0.4/lib/libmmcm90.so.0
b61ae000-b61b2000 r-xp 00000000 08:11 4431896 /home/oracle/DevSuite-9.0.4/lib/libmmft90.so.0
b61b2000-b61b3000 rw-p 00003000 08:11 4431896 /home/oracle/DevSuite-9.0.4/lib/libmmft90.so.0
b61b3000-b61b4000 r-xp 00000000 08:11 4431897 /home/oracle/DevSuite-9.0.4/lib/libmmia90.so.0
b61b4000-b61b5000 rw-p 00000000 08:11 4431897 /home/oracle/DevSuite-9.0.4/lib/libmmia90.so.0
b61b6000-b61e0000 r-xp 00000000 08:11 4431899 /home/oracle/DevSuite-9.0.4/lib/libmmoi90.so.0
b61e0000-b61e1000 rw-p 00029000 08:11 4431899 /home/oracle/DevSuite-9.0.4/lib/libmmoi90.so.0
b61e1000-b61f7000 r-xp 00000000 08:11 4431900 /home/oracle/DevSuite-9.0.4/lib/libmmos90.so.0
b61f7000-b61f8000 rw-p 00015000 08:11 4431900 /home/oracle/DevSuite-9.0.4/lib/libmmos90.so.0
b61f8000-b61fa000 r-xp 00000000 08:11 4431901 /home/oracle/DevSuite-9.0.4/lib/libmmov90.so.0
b61fa000-b61fb000 rw-p 00001000 08:11 4431901 /home/oracle/DevSuite-9.0.4/lib/libmmov90.so.0
b61fb000-b621d000 r-xp 00000000 08:11 4431898 /home/oracle/DevSuite-9.0.4/lib/libmmiw90.so.0
b621d000-b621f000 rw-p 00021000 08:11 4431898 /home/oracle/DevSuite-9.0.4/lib/libmmiw90.so.0
b621f000-b6228000 r-xp 00000000 08:11 4431894 /home/oracle/DevSuite-9.0.4/lib/libmma90.so.0
b6228000-b6229000 rw-p 00008000 08:11 4431894 /home/oracle/DevSuite-9.0.4/lib/libmma90.so.0
b622a000-b6263000 r-xp 00000000 08:11 4431943 /home/oracle/DevSuite-9.0.4/lib/libca90.so.0
b6263000-b6267000 rw-p 00038000 08:11 4431943 /home/oracle/DevSuite-9.0.4/lib/libca90.so.0
b6268000-b6279000 r-xp 00000000 08:11 4431802 /home/oracle/DevSuite-9.0.4/lib/libuicc90.so.0
b6279000-b627b000 rw-p 00010000 08:11 4431802 /home/oracle/DevSuite-9.0.4/lib/libuicc90.so.0
b627b000-b629e000 r-xp 00000000 08:11 4431872 /home/oracle/DevSuite-9.0.4/lib/libucol90.so.0
b629e000-b629f000 rw-p 00022000 08:11 4431872 /home/oracle/DevSuite-9.0.4/lib/libucol90.so.0
b629f000-b6468000 r-xp 00000000 08:11 4431788 /home/oracle/DevSuite-9.0.4/lib/libde90.so.0
b6468000-b6471000 rw-p 001c8000 08:11 4431788 /home/oracle/DevSuite-9.0.4/lib/libde90.so.0
b6471000-b649e000 r-xp 00000000 08:11 4431932 /home/oracle/DevSuite-9.0.4/lib/librws90.so.0
b649e000-b64a0000 rw-p 0002c000 08:11 4431932 /home/oracle/DevSuite-9.0.4/lib/librws90.so.0
b64a0000-b64ae000 r-xp 00000000 08:11 4431842 /home/oracle/DevSuite-9.0.4/lib/libnn90.so.0
b64ae000-b64b0000 rw-p 0000d000 08:11 4431842 /home/oracle/DevSuite-9.0.4/lib/libnn90.so.0
b64b0000-b66ac000 r-xp 00000000 08:11 4431983 /home/oracle/DevSuite-9.0.4/lib/libobx90.so.0
b66ac000-b66c4000 rw-p 001fb000 08:11 4431983 /home/oracle/DevSuite-9.0.4/lib/libobx90.so.0
b66c7000-b6f72000 r-xp 00000000 08:11 4431990 /home/oracle/DevSuite-9.0.4/lib/librw90.so
b6f72000-b6fc6000 rw-p 008ab000 08:11 4431990 /home/oracle/DevSuite-9.0.4/lib/librw90.so
b6fcb000-b757a000 r-xp 00000000 08:11 2861941 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/server/libjvm.so
b757a000-b75d4000 rw-p 005ae000 08:11 2861941 /home/oracle/DevSuite-9.0.4/jre/1.4.2/lib/i386/server/libjvm.so
b75e7000-b75e8000 r-xp 00000000 08:01 230043 /etc/libcwait.so
b75e8000-b75e9000 rw-p 00000000 08:01 230043 /etc/libcwait.so
b75eb000-b7600000 r-xp 00000000 08:01 523268 /lib/ld-2.3.2.so
b7600000-b7601000 rw-p 00014000 08:01 523268 /lib/ld-2.3.2.so
Heap at VM Abort:
Heap
def new generation total 576K, used 131K [0x9cd10000, 0x9cdb0000, 0x9e980000)
eden space 512K, 25% used [0x9cd10000, 0x9cd30ec0, 0x9cd90000)
from space 64K, 0% used [0x9cd90000, 0x9cd90000, 0x9cda0000)
to space 64K, 0% used [0x9cda0000, 0x9cda0000, 0x9cdb0000)
tenured generation total 1408K, used 0K [0x9e980000, 0x9eae0000, 0xacd10000)
the space 1408K, 0% used [0x9e980000, 0x9e980000, 0x9e980200, 0x9eae0000)
compacting perm gen total 16384K, used 892K [0xacd10000, 0xadd10000, 0xb0d10000)
the space 16384K, 5% used [0xacd10000, 0xacdef1a0, 0xacdef200, 0xadd10000)
Local Time = Fri Mar 11 13:34:44 2005
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Server VM (1.4.2_02-b03 mixed mode)
# An error report file has been saved as hs_err_pid24446.log.
# Please refer to the file for further information.
Abort (core dumped) -
Hi
after a long time today I tried to update my arch system. I removed bin and sbin and /usr/sbin directories and perform the update. now I get this messy error which I have no idea on how to fix it.
error: failed to commit transaction (conflicting files)
glibc: /usr/bin/iconvconfig exists in filesystem
glibc: /usr/bin/nscd exists in filesystem
glibc: /usr/bin/sln exists in filesystem
glibc: /usr/bin/zdump exists in filesystem
glibc: /usr/bin/zic exists in filesystem
bash: /usr/bin/sh exists in filesystem
cracklib: /usr/bin/cracklib-check exists in filesystem
cracklib: /usr/bin/cracklib-format exists in filesystem
cracklib: /usr/bin/cracklib-packer exists in filesystem
cracklib: /usr/bin/cracklib-unpacker exists in filesystem
cracklib: /usr/bin/create-cracklib-dict exists in filesystem
pam: /usr/bin/mkhomedir_helper exists in filesystem
pam: /usr/bin/pam_tally exists in filesystem
pam: /usr/bin/pam_tally2 exists in filesystem
pam: /usr/bin/pam_timestamp_check exists in filesystem
pam: /usr/bin/unix_chkpwd exists in filesystem
pam: /usr/bin/unix_update exists in filesystem
libcap: /usr/bin/capsh exists in filesystem
libcap: /usr/bin/getcap exists in filesystem
libcap: /usr/bin/getpcaps exists in filesystem
libcap: /usr/bin/setcap exists in filesystem
kmod: /usr/bin/depmod exists in filesystem
kmod: /usr/bin/modprobe exists in filesystem
shadow: /usr/bin/chgpasswd exists in filesystem
shadow: /usr/bin/chpasswd exists in filesystem
shadow: /usr/bin/groupadd exists in filesystem
shadow: /usr/bin/groupdel exists in filesystem
shadow: /usr/bin/groupmems exists in filesystem
shadow: /usr/bin/groupmod exists in filesystem
shadow: /usr/bin/groups exists in filesystem
shadow: /usr/bin/grpck exists in filesystem
shadow: /usr/bin/grpconv exists in filesystem
shadow: /usr/bin/grpunconv exists in filesystem
shadow: /usr/bin/newusers exists in filesystem
shadow: /usr/bin/nologin exists in filesystem
shadow: /usr/bin/pwck exists in filesystem
shadow: /usr/bin/pwconv exists in filesystem
shadow: /usr/bin/pwunconv exists in filesystem
shadow: /usr/bin/useradd exists in filesystem
shadow: /usr/bin/userdel exists in filesystem
shadow: /usr/bin/usermod exists in filesystem
util-linux: /usr/bin/addpart exists in filesystem
util-linux: /usr/bin/agetty exists in filesystem
util-linux: /usr/bin/blkid exists in filesystem
util-linux: /usr/bin/blockdev exists in filesystem
util-linux: /usr/bin/cfdisk exists in filesystem
util-linux: /usr/bin/chcpu exists in filesystem
util-linux: /usr/bin/ctrlaltdel exists in filesystem
util-linux: /usr/bin/delpart exists in filesystem
util-linux: /usr/bin/dmesg exists in filesystem
util-linux: /usr/bin/fdformat exists in filesystem
util-linux: /usr/bin/fdisk exists in filesystem
util-linux: /usr/bin/findfs exists in filesystem
util-linux: /usr/bin/findmnt exists in filesystem
util-linux: /usr/bin/fsck exists in filesystem
util-linux: /usr/bin/fsck.cramfs exists in filesystem
util-linux: /usr/bin/fsck.minix exists in filesystem
util-linux: /usr/bin/fsfreeze exists in filesystem
util-linux: /usr/bin/fstrim exists in filesystem
util-linux: /usr/bin/hwclock exists in filesystem
util-linux: /usr/bin/kill exists in filesystem
util-linux: /usr/bin/ldattach exists in filesystem
util-linux: /usr/bin/login exists in filesystem
util-linux: /usr/bin/losetup exists in filesystem
util-linux: /usr/bin/lsblk exists in filesystem
util-linux: /usr/bin/mkfs exists in filesystem
util-linux: /usr/bin/mkfs.bfs exists in filesystem
util-linux: /usr/bin/mkfs.cramfs exists in filesystem
util-linux: /usr/bin/mkfs.minix exists in filesystem
util-linux: /usr/bin/mkswap exists in filesystem
util-linux: /usr/bin/more exists in filesystem
util-linux: /usr/bin/mount exists in filesystem
util-linux: /usr/bin/mountpoint exists in filesystem
util-linux: /usr/bin/partx exists in filesystem
util-linux: /usr/bin/pivot_root exists in filesystem
util-linux: /usr/bin/raw exists in filesystem
util-linux: /usr/bin/readprofile exists in filesystem
util-linux: /usr/bin/resizepart exists in filesystem
util-linux: /usr/bin/rtcwake exists in filesystem
util-linux: /usr/bin/sfdisk exists in filesystem
util-linux: /usr/bin/su exists in filesystem
util-linux: /usr/bin/sulogin exists in filesystem
util-linux: /usr/bin/swaplabel exists in filesystem
util-linux: /usr/bin/swapoff exists in filesystem
util-linux: /usr/bin/swapon exists in filesystem
util-linux: /usr/bin/switch_root exists in filesystem
util-linux: /usr/bin/umount exists in filesystem
util-linux: /usr/bin/uuidd exists in filesystem
util-linux: /usr/bin/vigr exists in filesystem
util-linux: /usr/bin/vipw exists in filesystem
util-linux: /usr/bin/wdctl exists in filesystem
util-linux: /usr/bin/wipefs exists in filesystem
e2fsprogs: /usr/bin/badblocks exists in filesystem
e2fsprogs: /usr/bin/debugfs exists in filesystem
e2fsprogs: /usr/bin/dumpe2fs exists in filesystem
e2fsprogs: /usr/bin/e2freefrag exists in filesystem
e2fsprogs: /usr/bin/e2fsck exists in filesystem
e2fsprogs: /usr/bin/e2image exists in filesystem
e2fsprogs: /usr/bin/e2label exists in filesystem
e2fsprogs: /usr/bin/e2undo exists in filesystem
e2fsprogs: /usr/bin/e4defrag exists in filesystem
e2fsprogs: /usr/bin/filefrag exists in filesystem
e2fsprogs: /usr/bin/fsck.ext2 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext3 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext4 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext4dev exists in filesystem
e2fsprogs: /usr/bin/logsave exists in filesystem
e2fsprogs: /usr/bin/mke2fs exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext2 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext3 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext4 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext4dev exists in filesystem
e2fsprogs: /usr/bin/mklost+found exists in filesystem
e2fsprogs: /usr/bin/resize2fs exists in filesystem
e2fsprogs: /usr/bin/tune2fs exists in filesystem
libsasl: /usr/bin/pluginviewer exists in filesystem
libsasl: /usr/bin/sasldblistusers2 exists in filesystem
libsasl: /usr/bin/saslpasswd2 exists in filesystem
keyutils: /usr/bin/key.dns_resolver exists in filesystem
keyutils: /usr/bin/keyctl exists in filesystem
keyutils: /usr/bin/request-key exists in filesystem
krb5: /usr/bin/gss-server exists in filesystem
krb5: /usr/bin/kadmin.local exists in filesystem
krb5: /usr/bin/kadmind exists in filesystem
krb5: /usr/bin/kdb5_ldap_util exists in filesystem
krb5: /usr/bin/kdb5_util exists in filesystem
krb5: /usr/bin/kprop exists in filesystem
krb5: /usr/bin/kpropd exists in filesystem
krb5: /usr/bin/kproplog exists in filesystem
krb5: /usr/bin/krb5-send-pr exists in filesystem
krb5: /usr/bin/krb5kdc exists in filesystem
krb5: /usr/bin/sim_server exists in filesystem
krb5: /usr/bin/sserver exists in filesystem
krb5: /usr/bin/uuserver exists in filesystem
avahi: /usr/bin/avahi-autoipd exists in filesystem
avahi: /usr/bin/avahi-daemon exists in filesystem
avahi: /usr/bin/avahi-dnsconfd exists in filesystem
gconf: /usr/bin/gconfpkg exists in filesystem
pciutils: /usr/bin/lspci exists in filesystem
pciutils: /usr/bin/setpci exists in filesystem
alsa-utils: /usr/bin/alsactl exists in filesystem
apache: /usr/bin/ab exists in filesystem
apache: /usr/bin/apachectl exists in filesystem
apache: /usr/bin/apxs exists in filesystem
apache: /usr/bin/checkgid exists in filesystem
apache: /usr/bin/dbmmanage exists in filesystem
apache: /usr/bin/envvars exists in filesystem
apache: /usr/bin/envvars-std exists in filesystem
apache: /usr/bin/htcacheclean exists in filesystem
apache: /usr/bin/htdbm exists in filesystem
apache: /usr/bin/htdigest exists in filesystem
apache: /usr/bin/htpasswd exists in filesystem
apache: /usr/bin/httpd exists in filesystem
apache: /usr/bin/httpd.itk exists in filesystem
apache: /usr/bin/httpd.worker exists in filesystem
apache: /usr/bin/httxt2dbm exists in filesystem
apache: /usr/bin/logresolve exists in filesystem
apache: /usr/bin/rotatelogs exists in filesystem
apache: /usr/bin/suexec exists in filesystem
icu: /usr/bin/genccode exists in filesystem
icu: /usr/bin/gencmn exists in filesystem
icu: /usr/bin/gennorm2 exists in filesystem
icu: /usr/bin/gensprep exists in filesystem
icu: /usr/bin/icupkg exists in filesystem
ca-certificates: /usr/bin/update-ca-certificates exists in filesystem
v4l-utils: /usr/bin/v4l2-dbg exists in filesystem
gnupg: /usr/bin/addgnupghome exists in filesystem
gnupg: /usr/bin/applygnupgdefaults exists in filesystem
cdrkit: /usr/bin/netscsid exists in filesystem
gpm: /usr/bin/gpm exists in filesystem
ca-certificates-java: /usr/bin/init-jks-keystore exists in filesystem
rtmpdump: /usr/bin/rtmpgw exists in filesystem
rtmpdump: /usr/bin/rtmpsrv exists in filesystem
rtmpdump: /usr/bin/rtmpsuck exists in filesystem
cifs-utils: /usr/bin/cifs.idmap exists in filesystem
cifs-utils: /usr/bin/cifs.upcall exists in filesystem
cpupower: /usr/bin/cpufreq-bench exists in filesystem
cronie: /usr/bin/anacron exists in filesystem
cronie: /usr/bin/crond exists in filesystem
device-mapper: /usr/bin/dmeventd exists in filesystem
device-mapper: /usr/bin/dmsetup exists in filesystem
cryptsetup: /usr/bin/cryptsetup exists in filesystem
cryptsetup: /usr/bin/cryptsetup-reencrypt exists in filesystem
cryptsetup: /usr/bin/veritysetup exists in filesystem
iptables: /usr/bin/ip6tables exists in filesystem
iptables: /usr/bin/ip6tables-restore exists in filesystem
iptables: /usr/bin/ip6tables-save exists in filesystem
iptables: /usr/bin/iptables exists in filesystem
iptables: /usr/bin/iptables-restore exists in filesystem
iptables: /usr/bin/iptables-save exists in filesystem
iptables: /usr/bin/xtables-multi exists in filesystem
iproute2: /usr/bin/arpd exists in filesystem
iproute2: /usr/bin/bridge exists in filesystem
iproute2: /usr/bin/ctstat exists in filesystem
iproute2: /usr/bin/genl exists in filesystem
iproute2: /usr/bin/ifcfg exists in filesystem
iproute2: /usr/bin/ifstat exists in filesystem
iproute2: /usr/bin/ip exists in filesystem
iproute2: /usr/bin/lnstat exists in filesystem
iproute2: /usr/bin/nstat exists in filesystem
iproute2: /usr/bin/routef exists in filesystem
iproute2: /usr/bin/routel exists in filesystem
iproute2: /usr/bin/rtacct exists in filesystem
iproute2: /usr/bin/rtmon exists in filesystem
iproute2: /usr/bin/rtpr exists in filesystem
iproute2: /usr/bin/rtstat exists in filesystem
iproute2: /usr/bin/ss exists in filesystem
iproute2: /usr/bin/tc exists in filesystem
dhclient: /usr/bin/dhclient exists in filesystem
dhclient: /usr/bin/dhclient-script exists in filesystem
dhcpcd: /usr/bin/dhcpcd exists in filesystem
dosfstools: /usr/bin/dosfsck exists in filesystem
dosfstools: /usr/bin/dosfslabel exists in filesystem
dosfstools: /usr/bin/fsck.msdos exists in filesystem
dosfstools: /usr/bin/fsck.vfat exists in filesystem
dosfstools: /usr/bin/mkdosfs exists in filesystem
dosfstools: /usr/bin/mkfs.msdos exists in filesystem
dosfstools: /usr/bin/mkfs.vfat exists in filesystem
procps-ng: /usr/bin/ps exists in filesystem
procps-ng: /usr/bin/sysctl exists in filesystem
pm-utils: /usr/bin/pm-hibernate exists in filesystem
pm-utils: /usr/bin/pm-powersave exists in filesystem
pm-utils: /usr/bin/pm-suspend exists in filesystem
pm-utils: /usr/bin/pm-suspend-hybrid exists in filesystem
usbmuxd: /usr/bin/usbmuxd exists in filesystem
wpa_supplicant: /usr/bin/wpa_cli exists in filesystem
wpa_supplicant: /usr/bin/wpa_passphrase exists in filesystem
wpa_supplicant: /usr/bin/wpa_supplicant exists in filesystem
ppp: /usr/bin/chat exists in filesystem
ppp: /usr/bin/plog exists in filesystem
ppp: /usr/bin/pppd exists in filesystem
ppp: /usr/bin/pppdump exists in filesystem
ppp: /usr/bin/pppoe-discovery exists in filesystem
ppp: /usr/bin/pppstats exists in filesystem
networkmanager: /usr/bin/NetworkManager exists in filesystem
fuse: /usr/bin/fusermount exists in filesystem
fuse: /usr/bin/mount.fuse exists in filesystem
fuse: /usr/bin/ulockmgr_server exists in filesystem
rtkit: /usr/bin/rtkitctl exists in filesystem
gdm: /usr/bin/gdm exists in filesystem
libatasmart: /usr/bin/skdump exists in filesystem
libatasmart: /usr/bin/sktest exists in filesystem
udisks2: /usr/bin/umount.udisks2 exists in filesystem
iputils: /usr/bin/arping exists in filesystem
iputils: /usr/bin/clockdiff exists in filesystem
iputils: /usr/bin/rarpd exists in filesystem
iputils: /usr/bin/rdisc exists in filesystem
iputils: /usr/bin/tftpd exists in filesystem
iputils: /usr/bin/tracepath exists in filesystem
iputils: /usr/bin/tracepath6 exists in filesystem
grub: /usr/bin/grub-bios-setup exists in filesystem
grub: /usr/bin/grub-install exists in filesystem
grub: /usr/bin/grub-mkconfig exists in filesystem
grub: /usr/bin/grub-mknetdir exists in filesystem
grub: /usr/bin/grub-ofpathname exists in filesystem
grub: /usr/bin/grub-probe exists in filesystem
grub: /usr/bin/grub-reboot exists in filesystem
grub: /usr/bin/grub-set-default exists in filesystem
grub: /usr/bin/grub-sparc64-setup exists in filesystem
inetutils: /usr/bin/dnsdomainname exists in filesystem
inetutils: /usr/bin/ftpd exists in filesystem
inetutils: /usr/bin/rlogind exists in filesystem
inetutils: /usr/bin/rshd exists in filesystem
inetutils: /usr/bin/talkd exists in filesystem
inetutils: /usr/bin/telnetd exists in filesystem
jfsutils: /usr/bin/fsck.jfs exists in filesystem
jfsutils: /usr/bin/jfs_debugfs exists in filesystem
jfsutils: /usr/bin/jfs_fsck exists in filesystem
jfsutils: /usr/bin/jfs_fscklog exists in filesystem
jfsutils: /usr/bin/jfs_logdump exists in filesystem
jfsutils: /usr/bin/jfs_mkfs exists in filesystem
jfsutils: /usr/bin/jfs_tune exists in filesystem
jfsutils: /usr/bin/mkfs.jfs exists in filesystem
kexec-tools: /usr/bin/kdump exists in filesystem
kexec-tools: /usr/bin/kexec exists in filesystem
kexec-tools: /usr/bin/vmcore-dmesg exists in filesystem
libbonobo: /usr/bin/bonobo-activation-sysconf exists in filesystem
tar: /usr/bin/tar exists in filesystem
lirc-utils: /usr/bin/lircd exists in filesystem
lirc-utils: /usr/bin/lircmd exists in filesystem
logrotate: /usr/bin/logrotate exists in filesystem
lsof: /usr/bin/lsof exists in filesystem
lvm2: /usr/bin/blkdeactivate exists in filesystem
lvm2: /usr/bin/fsadm exists in filesystem
lvm2: /usr/bin/lvchange exists in filesystem
lvm2: /usr/bin/lvconvert exists in filesystem
lvm2: /usr/bin/lvcreate exists in filesystem
lvm2: /usr/bin/lvdisplay exists in filesystem
lvm2: /usr/bin/lvextend exists in filesystem
lvm2: /usr/bin/lvm exists in filesystem
lvm2: /usr/bin/lvmchange exists in filesystem
lvm2: /usr/bin/lvmconf exists in filesystem
lvm2: /usr/bin/lvmdiskscan exists in filesystem
lvm2: /usr/bin/lvmdump exists in filesystem
lvm2: /usr/bin/lvmetad exists in filesystem
lvm2: /usr/bin/lvmsadc exists in filesystem
lvm2: /usr/bin/lvmsar exists in filesystem
lvm2: /usr/bin/lvreduce exists in filesystem
lvm2: /usr/bin/lvremove exists in filesystem
lvm2: /usr/bin/lvrename exists in filesystem
lvm2: /usr/bin/lvresize exists in filesystem
lvm2: /usr/bin/lvs exists in filesystem
lvm2: /usr/bin/lvscan exists in filesystem
lvm2: /usr/bin/pvchange exists in filesystem
lvm2: /usr/bin/pvck exists in filesystem
lvm2: /usr/bin/pvcreate exists in filesystem
lvm2: /usr/bin/pvdisplay exists in filesystem
lvm2: /usr/bin/pvmove exists in filesystem
lvm2: /usr/bin/pvremove exists in filesystem
lvm2: /usr/bin/pvresize exists in filesystem
lvm2: /usr/bin/pvs exists in filesystem
lvm2: /usr/bin/pvscan exists in filesystem
lvm2: /usr/bin/vgcfgbackup exists in filesystem
lvm2: /usr/bin/vgcfgrestore exists in filesystem
lvm2: /usr/bin/vgchange exists in filesystem
lvm2: /usr/bin/vgck exists in filesystem
lvm2: /usr/bin/vgconvert exists in filesystem
lvm2: /usr/bin/vgcreate exists in filesystem
lvm2: /usr/bin/vgdisplay exists in filesystem
lvm2: /usr/bin/vgexport exists in filesystem
lvm2: /usr/bin/vgextend exists in filesystem
lvm2: /usr/bin/vgimport exists in filesystem
lvm2: /usr/bin/vgimportclone exists in filesystem
lvm2: /usr/bin/vgmerge exists in filesystem
lvm2: /usr/bin/vgmknodes exists in filesystem
lvm2: /usr/bin/vgreduce exists in filesystem
lvm2: /usr/bin/vgremove exists in filesystem
lvm2: /usr/bin/vgrename exists in filesystem
lvm2: /usr/bin/vgs exists in filesystem
lvm2: /usr/bin/vgscan exists in filesystem
lvm2: /usr/bin/vgsplit exists in filesystem
man-db: /usr/bin/accessdb exists in filesystem
mdadm: /usr/bin/mdadm exists in filesystem
mdadm: /usr/bin/mdassemble exists in filesystem
mdadm: /usr/bin/mdmon exists in filesystem
net-snmp: /usr/bin/snmpd exists in filesystem
net-snmp: /usr/bin/snmptrapd exists in filesystem
net-tools: /usr/bin/arp exists in filesystem
net-tools: /usr/bin/ifconfig exists in filesystem
net-tools: /usr/bin/ipmaddr exists in filesystem
net-tools: /usr/bin/iptunnel exists in filesystem
net-tools: /usr/bin/mii-tool exists in filesystem
net-tools: /usr/bin/nameif exists in filesystem
net-tools: /usr/bin/netstat exists in filesystem
net-tools: /usr/bin/plipconfig exists in filesystem
net-tools: /usr/bin/rarp exists in filesystem
net-tools: /usr/bin/route exists in filesystem
net-tools: /usr/bin/slattach exists in filesystem
xinetd: /usr/bin/itox exists in filesystem
xinetd: /usr/bin/xconv.pl exists in filesystem
xinetd: /usr/bin/xinetd exists in filesystem
netkit-bsd-finger: /usr/bin/in.fingerd exists in filesystem
pptpclient: /usr/bin/pptp exists in filesystem
pptpclient: /usr/bin/pptpsetup exists in filesystem
vpnc: /usr/bin/vpnc exists in filesystem
vpnc: /usr/bin/vpnc-disconnect exists in filesystem
ntfs-3g: /usr/bin/mkntfs exists in filesystem
ntfs-3g: /usr/bin/ntfsclone exists in filesystem
ntfs-3g: /usr/bin/ntfscp exists in filesystem
ntfs-3g: /usr/bin/ntfslabel exists in filesystem
ntfs-3g: /usr/bin/ntfsresize exists in filesystem
ntfs-3g: /usr/bin/ntfsundelete exists in filesystem
openssh: /usr/bin/sshd exists in filesystem
parted: /usr/bin/parted exists in filesystem
parted: /usr/bin/partprobe exists in filesystem
pcmciautils: /usr/bin/lspcmcia exists in filesystem
pcmciautils: /usr/bin/pccardctl exists in filesystem
vde2: /usr/bin/vde_tunctl exists in filesystem
reiserfsprogs: /usr/bin/debugreiserfs exists in filesystem
reiserfsprogs: /usr/bin/fsck.reiserfs exists in filesystem
reiserfsprogs: /usr/bin/mkfs.reiserfs exists in filesystem
reiserfsprogs: /usr/bin/mkreiserfs exists in filesystem
reiserfsprogs: /usr/bin/reiserfsck exists in filesystem
reiserfsprogs: /usr/bin/reiserfstune exists in filesystem
reiserfsprogs: /usr/bin/resize_reiserfs exists in filesystem
sane: /usr/bin/saned exists in filesystem
sudo: /usr/bin/visudo exists in filesystem
syslog-ng: /usr/bin/syslog-ng exists in filesystem
syslog-ng: /usr/bin/syslog-ng-ctl exists in filesystem
sysvinit-tools: /usr/bin/bootlogd exists in filesystem
sysvinit-tools: /usr/bin/fstab-decode exists in filesystem
sysvinit-tools: /usr/bin/killall5 exists in filesystem
sysvinit-tools: /usr/bin/pidof exists in filesystem
udisks: /usr/bin/umount.udisks exists in filesystem
zvbi: /usr/bin/zvbid exists in filesystem
vnstat: /usr/bin/vnstatd exists in filesystem
xfsprogs: /usr/bin/fsck.xfs exists in filesystem
xfsprogs: /usr/bin/mkfs.xfs exists in filesystem
xfsprogs: /usr/bin/xfs_admin exists in filesystem
xfsprogs: /usr/bin/xfs_bmap exists in filesystem
xfsprogs: /usr/bin/xfs_check exists in filesystem
xfsprogs: /usr/bin/xfs_copy exists in filesystem
xfsprogs: /usr/bin/xfs_db exists in filesystem
xfsprogs: /usr/bin/xfs_estimate exists in filesystem
xfsprogs: /usr/bin/xfs_freeze exists in filesystem
xfsprogs: /usr/bin/xfs_fsr exists in filesystem
xfsprogs: /usr/bin/xfs_growfs exists in filesystem
xfsprogs: /usr/bin/xfs_info exists in filesystem
xfsprogs: /usr/bin/xfs_io exists in filesystem
xfsprogs: /usr/bin/xfs_logprint exists in filesystem
xfsprogs: /usr/bin/xfs_mdrestore exists in filesystem
xfsprogs: /usr/bin/xfs_metadump exists in filesystem
xfsprogs: /usr/bin/xfs_mkfile exists in filesystem
xfsprogs: /usr/bin/xfs_ncheck exists in filesystem
xfsprogs: /usr/bin/xfs_quota exists in filesystem
xfsprogs: /usr/bin/xfs_repair exists in filesystem
xfsprogs: /usr/bin/xfs_rtcp exists in filesystem
Errors occurred, no packages were upgraded.
whould you please help me out of these?
thenk you.
Last edited by jgvr (2013-10-08 10:06:49)jrussell wrote:Also, I don't think you are supposed to remove those directories.... Are you referring to this? https://www.archlinux.org/news/binaries … ervention/
Judging from the output, I think that OP has a system from before that news post you linked and hasn't quite understood the news post correctly.
@jgvr: I think you have missed this news update and haven't read the forums on how to do it, thus ending up with a borked system.
My approach would be to move everything back to where it originally was, then upgrade everything (including AUR packages) except for glibc,bash and filesystem and see how far that gets you first. But as @Scimmia says, if you installation was from before Jan 2013, just re-install the whole thing.
Last edited by clfarron4 (2013-10-08 21:22:52) -
Navigate Value Interaction - Case Statements
Hi,
I am having problems using the navigate value interaction feature in OBIEE. The columns I am using to navigate contain case statement bin filters, is it not possible to use value interaction on these type of fields?
For example bin grouping are created in both reports and are identical but the interaction does not work
. TIMESTAMPDIFF(SQL_TSI_MONTH,CURR... is between 0 and 6
. TIMESTAMPDIFF(SQL_TSI_MONTH,CURR... is between 7 and 12
Can anyone advise a workaround other than creating the column in the rpd.
ThanksI gave a detailed decision in a similar topic Obiee Report Help
-
How can I count detail information without having it show up in my results
I'm trying to count the number of sales orders within specific value ranges such as 0 to 100, 100 to 200, ect. I can get the count but only when the order number is on the report. Is there someway to count the orders and place them in the Bins without having a line show up for each order.
Put the BINS column in the "Sections" area. This will split the rows for each BIN group. Now you can apply the "sigma sign" aggregation to the rows and see the total for each BIN.
Expected result is to have one row per BIN group with the total of your measure for each BIN.
If this is not what you are looking for, give a mock up of what you see in your pivot table.
Having said all this, if you're going to be working with a million rows, you'd best break the query up into separate queries. Build one Report for each BIN group and place each in its own section of a dashboard.
What you can do is rename each section of the dashboard to the name of the BIN group and delete the Title View of each Report. The dashboard can then be defaulted to a collapsed state showing the names of each Report (the BINS of each group). In effect, you are using the Dashboard as a giant pivot table with the Sections as the BINS. The reports are smaller and you can have your total for each BIN.
This is what I would recommend. -
Hello friends,
I have client interview on this "WARE HOUSE MANAGEMENT AND LEAN WARE HOUSE MANAGEMENT" . So please help me out by sending good material. Really waiting for good support.
Thanks,
Rams.from here questions are also asked in the certification exams, so here's a point-wise rant:-
If you have a warehouse with random storage, you need to use the WM System with full functionality. Since a material can be stored in different storage bins or even several storage bins at the same time, precise inventory management at the level of the storage bin is required.
 Lean WM does not have inventory management at the level of the storage bin and is therefore more suitable for fixed bin warehouses. In a fixed bin storage area, the material is always in the same storage bin.
 To print the storage bin in the picking document, you must maintain the respective data in the material master in the view "Storage 1". Maintenance of further warehouse data and the Warehouse Management views is not required.
 Some of the WM functions not included in Lean WM are listed below:
 Storage sections
 Reserve storage bins
 Strategies for putaway and picking
 Replenishment
 Inventory at storage-bin level
This considerably reduces implementation effort.
 For Lean WM you need at least one warehouse number and at least one storage type from which picking takes place and one storage type in which goods are stored (for example, picking storage type as source storage type, shipping zone as destination storage type).
 In the picking storage area, you can have storage bins grouped together from the stock removal viewpoint (for example, to distribute the workload evenly). Picking areas can be defined for each warehouse number and storage type.
 In addition to the picking area, there are other organizational units in the warehouse. These are the staging areas and the doors. They are defined in the outbound delivery or determined by the system and they can also be printed out on the picking documents.
 You can activate Lean WM in Customizing at the warehouse number level.
 You assign a warehouse number to a combination of plant and storage type. In this way, the organizational units in the warehouse are linked up to MM Inventory Management. Also, through this assignment, a status for WM activities is assigned to the respective items in the outbound delivery. -
Oracle Partition maintenance range information required
Hi
I would like to know the range between oldest partition and the newest partition on a table. can some body help me with this?
I have a query that gives me all the partition tables in the database ,now I would like to get the date of oldest partition and the newest partition to get the rentention period..any help would be appreciated..
here is what I have get all the partition tables
SELECT table_owner, table_name,max(partition_name)
FROM dba_tab_partitions p
WHERE p.table_name IN
(select distinct c.TABLE_NAME
from dba_part_key_columns p, dba_tab_cols c
where p.name = c.TABLE_NAME
and p.column_name = c.COLUMN_NAME
and p.object_type = 'TABLE'
and c.DATA_TYPE = 'DATE'
and p.owner NOT IN ('SYS', 'SYSTEM'))
and p.table_name not like 'BIN%'
group by table_owner, table_name
order by table_owner;What is your 4 digit Oracle version?
Provide an example of a table and what you consider to be the 'oldest' and 'newest' partitions. Are you talking about tables that are RANGE partitioned? INTERVAL partitioned? What about subpartitions?
Why does your query use MAX(partition_name)? How is that information useful - partitions might have any names including system generated ones.
And why would the oldest and newest give you retention period?
For simple RANGE partitioned tables the range info is in the HIGH_VALUE column (a LONG - so need to use PL/SQL) of DBA_TAB_PARTITIONS.
Suggest you first work out a step-by-step manual process for doing what you want to do and then work on automating it.
Post an example of your manual process. -
Os commands, oracle user permissions
I installed the objects as outlined in this Oracle whitepaper:
http://www.oracle.com/technology/tech/java/jsp/pdf/calling_shell_commands_from_plsql_1.1.pdf
This allows me to enter os commands from pl/sql using the java method. Works like a charm, except I can not access a directory our linux admin recently granted to the oracle user.
If I run the groups command from a tty session as user oracle, I get:
$ /usr/bin/groups
oinstall newgrp dba
If I run the same thing from sqlplus I get:
SQL> select os_command.exec_clob('/usr/bin/groups') command from dual ;
COMMAND
oinstall dba
I do not have the 'newgrp' group when I run from the db.
The dba bounced the db but no change. I understand the jvm resides in the db kernel. Bouncing the server is not an option at this point.user12052260 wrote:
Hi Stevens,
There is very small reason, to reduce the downtime we are planning to install 10g binaries in on week day and weekend we will take downtime only for upgrade.
so that while upgrading we can exclude the installation time.
Thats why we are planning to create new os level user and installing 10g binaries.
So asked for advice and suggestions whether is it a way to approach.
Thank you very much
VamshiUnderstood, but none of that requires a new oracle user/software owner. I have managed AIX boxes hosting 3 separate db's, each with it's own OHome, owned by it's own OS account. I understand the reasoning of the guy who set that up (that I inherited it from), but disagree with it. It created as many problems as it solved. There really is no good reason that I can see to create more than one single OS account to own all of the oracle software installations. Just as there is generally no good reason to have multiple OHome's of the same version. Just as there is no good reason to have multiple listeners on a given host. -
Dear guru,s
In our workplace sap-ecc5.0,db-oracle,OS-HP_UX .Just i wants to know what are the commands we can use at os level...........for seeing file system,giving file permission,ect.Please anyone send me those commands which are we can use..............
Regard's
rockyHi,
Linux Commands for working with Files
1. Listing the files
ls
Lists the contents of a directory.
Syntax
ls [-a] [-A] [-b] [-c] [-C] [-d] [-f] [-F] [-g] [-i] [-l] [-L] [-m] [-o] [-p] [-q] [-r] [-R] [-s] [-t] [-u] [-x]
-a Shows you all files, even files that are hidden (these files begin with a dot.)
-A List all files including the hidden files. However, does not display the working directory (.) or the parent directory (..).
-d If an argument is a directory it only lists its name not its contents.
-r Reverses the order of how the files are displayed.
-R Includes the contents of subdirectories.
-s Give size in blocks, including indirect blocks, for each entry.
-t Shows you the files in modification time.
Examples
ls -l
In the above example this command would list each of the files in the current directory and the files permissions, the size of the file, date of the last modification, and the file name or directory.
Permissions Directories Group Size Date Directory or file
drwx------ 2 users 4096 Nov 2 19:51 mail/
drwxr-s--- 35 www 32768 Jan 20 22:39 public_html/
-rw------- 1 users 3 Nov 25 02:58 test.txt
ls /
List the contents of your root directory.
ls ../
List the contents of the parent directory.
ls */
List the contents of all sub directories.
ls -d */
Only list the directories in the current directory.
2. Displaying the files
cat
Allows you to look, modify or combine a file.
Syntax
cat filename [-n] [-b] [-u] [-s] [-v]
filename The name of the file or files that you wish to look at or perform tasks on.
-n Precede each line output with its line number.
Examples
cat file1.txt file2.txt > file3.txt - Reads file1.txt and file2.txt and combines those files to make file3.txt.
3. Copying/Renaming Files
cp
Copies files from one location to another.
Syntax
cp [OPTION]... SOURCE DEST
cp [OPTION]... SOURCE... DIRECTORY
-i, --interactive prompt before overwrite
-l, --link link files instead of copying
-p same as --preserve=mode,ownership,timestamps
-R, -r, --recursive copy directories recursively
-u, --update copy only when the SOURCE file is newer than the destination file or when the destination file is missing
Examples
cp file1.txt newdir
Copies the file1.txt in the current directory to the newdir directory.
cp *.txt newdir
Copy all files ending in .txt into the newdir directory.
cp -r /home/hope/files/* /home/hope/backup
Copies all the files, directories, and subdirectories in the files directory into the backup directory.
4. Renaming Files
mv - move (rename) files
Syntax
mv [OPTION]... SOURCE DEST
mv [OPTION]... SOURCE... DIRECTORY
-f, --force
do not prompt before overwriting equivalent to --reply=yes
-u, --update
move only when the SOURCE file is newer than the destination file or when the destination file is missing
5. Creating and deleting Files
cd
Changes the directory.
Syntax
cd [directory]
directory Name of the directory user wishes to enter.
cd .. Used to go back one directory on the majority of all Unix shells. It is important that the space be between the cd and the ..
Examples
cd hope
The above example would go into the hope directory if it exists.
cd ../home/users/computerhope
The above example would go back one directory and then go into the home/users/computerhope directory.
cd ../../
the above example would go back two directories.
cd
typing just cd alone will move you into the home directory.
mkdir
Short for make directory this command is used to create a new directory.
Syntax
mkdir dirname
Examples
mkdir mydir - This would create a new directory called mydir.
Deleting Files
rm
Deletes a file without confirmation (by default).
Syntax
rm [-f] [-i] [-R] [-r] [filenames | directory]
-f Remove all files (whether write-protected or not) in a directory without prompting the user. In a write-protected directory, however, files are never removed (whatever their permissions are), but no messages are displayed. If the removal of a write-protected directory is attempted, this option will not suppress an error message.
-i Interactive. With this option, rm prompts for confirmation before removing any files. It over- rides the -f option and remains in effect even if the standard input is not a terminal.
-R Same as -r option.
-r Recursively remove directories and subdirectories in the argument list. The directory will be emptied of files and removed. The user is normally prompted for removal of any write-protected files which the directory contains. The write-protected files are removed without prompting, however, if the -f option is used, or if the standard input is not a terminal and the -i option is not used.
Examples
rm myfile.txt
Remove the file myfile.txt without prompting the user.
rm -r directory
Remove a directory, even if files existed in that directory.
rmdir
Deletes a directory.
Syntax
rmdir [OPTION]... DIRECTORY...
Examples
rmdir mydir - removes the directory mydir
rm -r directory - would remove a directory, even if files existed in that directory
6. File permission commands
chmod
Changes the permission of a file.
Syntax
chmod [OPTION]... MODE[,MODE]... FILE...
-R, --recursive change files and directories recursively
Permissions
u - User who owns the file.
g - Group that owns the file.
o - Other.
a - All.
r - Read the file.
w - Write or edit the file.
x - Execute or run the file as a program.
Numeric Permissions:
CHMOD can also to attributed by using Numeric Permissions:
400 read by owner
040 read by group
004 read by anybody (other)
200 write by owner
020 write by group
002 write by anybody
100 execute by owner
010 execute by group
001 execute by anybody
Examples
The above numeric permissions can be added to set a certain permission, for example, a common HTML file on a Unix server to be only viewed over the Internet would be:
chmod 644 file.htm
This gives the file read/write by the owner and only read by everyone else (-rw-rr).
Files such as scripts that need to be executed need more permission. Below is another example of a common permission given to scripts.
chmod 755 file.cgi
This would be the following 400040004200020100010+001 = 775 where you are giving all the rights but the capability for anyone to edit your file.cgi (-rwxr-xr-x).
Finally, another common CHMOD permission is 666, as shown below, which is read and write by everyone.
chmod 666 file.txt
chown
Command for that changes the owner of a file.
Syntax
chown [-R] newowner filenames
-R Change the permission on files that are in the subdirectories of the directory that you are currently in.
Examples
chown xyz file.txt - Give permissions as owner to user xyz.
Set User Identification Attribute (setuid)
When the set user ID access mode is set in the owner permissions, and the file is executable, processes which run it are granted access to system resources based on the owner of the file.
Be extremely careful when setting these permissions. Any user who runs that file assumes the permissions of the owner of the executable file, instead of the user who created the process..
The setuid permission is shown as an s in the file permissions. For example, the setuid permission on the /usr/bin/passwd command enables normal users to read and write an otherwise inaccessible /etc/passwd file:
user@myhost $ ls -l /etc/shadow /etc/passwd /usr/bin/passwd
-r----
1 root root 659 Jul 25 19:40 /etc/shadow
-rw-rr 1 root root 711 Jul 25 19:40 /etc/passwd
-r-sr-xr-x 1 root bin 15613 Apr 27 12:29 /usr/bin/passwd
You will notice that the s takes the place of the execute bit in the example above. This special permission mode really has no meaning unless the file also has execute permission as well.
In the example we see the /etc/shadow file is only readable by root, yet the /usr/bin/passwd file enables us to write our password changes there. When either a normal user, a member of the bin group, or even anyone else executes /usr/bin/passwd, it is really run as root, due to the ``s'' bit set in the owner's permissions field.
It is advisable to keep setuid, in order to reduce the possibility of their being exploited.
Umask Settings
The umask command is used to set and determine the default file creation permissions on the system. It is the octal complement of the desired file mode for the specific file type. Default permissions are:
777 - Executable files
666 - Text files
These defaults are set allowing all users to execute an executable file and not to execute a text file. The defaults allow all users can read and write the file.
The permission for the creation of new executable files is calculated by subtracting the umask value from the default permission value for the file type being created. An example for a text file is shown below with a umask value of 022:
666 Default Permission for text file
-022 Minus the umask value
644 Allowed Permissions
Therefore the umask value is an expression of the permissions the user, group and world will not have as a default with regard to reading, writing, or executing the file. The umask value here means the group the file belongs to and users other than the owner will not be able to write to the file. In this case, when a new text file is created it will have a file permission value of 644, which means the owner can read and write the file, but members of the group the file belongs to, and all others can only read the file. A long directory listing of a file with these permissions set is shown below.
-rw-rr 1 root workgrp 14233 Apr 24 10:32 textfile.txt
An example command to set the umask is:
umask 022
The most common umask setting is 022. The /etc/profile script is where the umask command is usually set for all users.
7. Searching for files
find
Finds one or more files
Syntax
find path expressions
-mtime n True if the file's data was modified n days ago.
-name pattern True if pattern matches the current file name. Normal shell file name generation characters (see sh) may be used. A backslash (\) is used as an escape character within the pattern. The pattern should be escaped or quoted when find is invoked from the shell.
-size n[c] True if the file is n blocks long (512 bytes per block). If n is followed by a c, the size is in
bytes.
When using find to determine files modified within a range of time, one must use the ?time argument before the -print argument; otherwise, find will give all files.
Examples
find -name 'mypage.htm'
In the above command the system would search for any file named mypage.htm in the current directory and any subdirectory.
find / -name 'mypage.htm'
In the above example the system would search for any file named mypage.htm on the root and all subdirectories from the root.
find -name 'file*'
In the above example the system would search for any file beginning with file in the current directory and any subdirectory.
find -name '*' -size +1000k
In the above example the system would search for any file that is larger then 1000k.
8. Linking files
Hard Links and Symbolic Links
They are listings that contain information about the file. Linux files don't actually live in directories. They are assigned an inode number, which Linux uses to locate files. So a file can have multiple hardlinks, appearing in multiple directories, but isn't deleted until there are no remaining hardlinks to it. Here are some other differences between hardlinks and symlinks:
1. You cannot create a hardlink for a directory.
2. If you remove the original file of a hardlink, the link will still show you the content of the file.
3. A symlink can link to a directory.
4. A symlink, like a Windows shortcut, becomes useless when you remove the original file.
Hardlinks
$ ln FileA FileB
Then use the "i" argument to list the inodes for both FileA and its hardlink. Type:
$ ls -il FileA FileB
This is what you get:
1482256 -rw-rr 2 bruno bruno 21 May 5 15:55 FileA
1482256 -rw-rr 2 bruno bruno 21 May 5 15:55 FileB
You can see that both FileA and FileB have the same inode number (1482256). Also both files have the same file permissions and the same size. Because that size is reported for the same inode, it does not consume any extra space on your HD!
Next, remove the original FileA:
$ rm FileA
And have a look at the content of the "link" FileB:
$ cat FileB
You will still be able to read the file..
Symlinks
Let's make a symlink to FileB. Call the symlink FileC:
$ ln -s FileB FileC
Then use the i argument again to list the inodes.
$ ls -il FileB FileC
This is what you'll get:
1482256 -rw-rr 1 bruno bruno 21 May 5 15:55 FileB
1482226 lrwxrwxrwx 1 bruno bruno 5 May 5 16:22 FileC -> FileB
You'll notice the inodes are different and the symlink got a "l" before the rwxrwxrwx. The link has different permissions than the original file because it is just a symbolic link. Its real content is just a string pointing to the original file. The size of the symlink (5) is the size of its string. (The "-> FileB" at the end shows you where the link points to.)
Now if we remove the original file:
$ rm FileB
and check the Test directory:
$ ls
You'll see the symlink FileC is still there, but if you try to list the contents:
$ cat FileC
It will tell you that there is no such file or directory. You can still list the inode. Typing:
$ ls -il FileC
will still give you:
1482226 lrwxrwxrwx 1 bruno bruno 5 May 5 16:22 FileC -> FileB
But the symlink is obsolete because the original file was removed, as were all the hard links. So the file was deleted even though the symlink remains.
9. Grep/egrep
grep
Finds text within a file.
Syntax
grep [options] [FILE...]
Patterns for searching.
. Matches single character.
* Wild character Example C* if found would pull up CC or CAT...
{} Matches any character contained within the bracket.
^ Represents the beginning of the line, so if you did ^T it would search for any sentence starting with a T.
$ Represents the end of the line, so if you did $. then it would pull up any lines that ended with .
\ Means to take the next character serious so you could search for C\ C.
Examples
grep "unix" *.htm
search all .htm files in the current directory for any reference of unix and give results similar to the below example text.
egrep
Search a file for a pattern using full regular expressions.
Syntax
egrep [-b] [-c] [-h] [-i] [-l] [-n] [-s] [-v] [-x] [ -e pattern_list ] [-f file ] [ strings ] [ file]
Examples
egrep "support|help|windows" myfile.txt - Would search for patterns of support help and windows in the file myfile.txt.
10. su command
Become super user or another user.
Syntax
su [ - ] [ username [ arg ] ]
username The name of another username that you wish to log in as.
arg Additional arguments that need to be passed through the su command.
Examples
su - hope - would login as the user hope .
11. Xargs
xargs
Build and execute command lines from standard input.
Syntax
xargs [-0prtx] [-e[eof-str]] [-i[replace-str]] [-l[max-lines]] [-n max-args] [-s max-chars] [-P max-procs] [null] [eof[=eof-str]] [replace[=replace-str]] [max-lines[=max-lines]] [interactive] [max-chars=max-chars] [--verbose]
Examples
find . -type f -mtime -1 -print | xargs pr -n
Find any files that have a modified time of 1 day and print the contents of each of those files.
Regards,
Raghu -
Hi,
I was wondering why the sizes (in blocks) returned by dba_data_files, dba_tablespace_usage_metrics and dba_extents do not match?
I am expecting that the sizes returned in below query to match but they are not. The sizes returned by the dba_tspace_usg_metrics_size and dba_data_files match but not with the sizes returned by dba_extents. Do anyone know why is it so?
SELECT dtum.tablespace_name,
dtum.tablespace_size dba_tspace_usg_metrics_size,
de.tablespace_size dba_extents_size,
ddf.dba_data_files_size
FROM (SELECT tablespace_name, tablespace_size
FROM dba_tablespace_usage_metrics) dtum,
( SELECT TABLESPACE_NAME, SUM (blocks) tablespace_size
FROM dba_extents
GROUP BY TABLESPACE_NAME
ORDER BY TABLESPACE_NAME) de,
( SELECT tablespace_name, SUM (blocks) dba_data_files_size
FROM dba_data_files
GROUP BY tablespace_name) ddf
WHERE dtum.tablespace_name = de.tablespace_name
AND dtum.tablespace_name = ddf.tablespace_name
Thanks,
ParshuAlso what I don't understand is why the total of dba_segments and dba_extents do not match? I am already filtering out the recycle bin objects.
SELECT dtum.tablespace_name,
dtum.tablespace_size dba_tspace_usg_metrics_size,
de.tablespace_size dba_extents_size,
ddf.dba_data_files_size, ds.dba_segements_size
FROM
(SELECT tablespace_name, tablespace_size FROM dba_tablespace_usage_metrics) dtum,
(SELECT tablespace_name, SUM (blocks) dba_data_files_size FROM dba_data_files GROUP BY tablespace_name) ddf,
(SELECT TABLESPACE_NAME, SUM (blocks) tablespace_size FROM dba_extents where segment_name not like 'BIN$%' GROUP BY TABLESPACE_NAME) de,
(SELECT tablespace_name, SUM(blocks) dba_segements_size FROM dba_segments where segment_name not like 'BIN$%' GROUP BY tablespace_name) ds
WHERE dtum.tablespace_name = de.tablespace_name
AND dtum.tablespace_name = ddf.tablespace_name
AND dtum.tablespace_name = ds.tablespace_name -
Recycle bin to show all deleted items on the site collection for specific user group
hi there, is there any way where a certain sharepoint group (i.e. site collection members) to view and restore deleted items on theentire collection, without giving them site collection rights orgive them more rights than necessary? we wanted to create
aSP group that has the permission to restore deleted items and give them to selected users so that our users won't have to contact us when they want to restore a deleted itemI don't believe you can. If an item get's deleted it should go to the first recycle bin @ /_layouts/15/RecycleBin.aspx
The Recycle Bin gives a site collection administrator
greater control when users delete files, versions of files, list items, libraries, lists, and folders from a SharePoint site by providing a second stage safety net before an item is permanently deleted from a site. When a user deletes an item from the Recycle
Bin, the item is sent to a second stage Recycle Bin (also known as the Site Collection Recycle Bin) that the site collection administrator manages. This article focuses on how a site collection administrator can manage the Recycle Bin for a site collection.
https://support.office.com/en-US/Article/Manage-the-Recycle-Bin-of-a-SharePoint-site-collection-5fa924ee-16d7-487b-9a0a-021b9062d14b
Ibrahim Sukari, Technical Consultant | SharePoint | Dynamics CRM |
LinkedIn Profile -
Grouping of bins withing one storage section per Material Number
HI,
We have requirement of placing materials into fix group of bins. e.g One material in 4 bins, second material in 8 bins, third Material in 10 bins, Fourth Material in 2 bins and so on. We have approximately 8500 numbers of different material in store.
Material Master has only One bin defined in WM view 2.
How can we keep one material into Group of Fix bin within one section.
Could you please help me to get above requirement.
Regards,
ManishHi ,
It means this is only way we can group bins togeather. I may be having more then 100 sections in the warehouse.
I mentioned in my earlier communication that we have lot of materials.
Its a very big storage area , and each material has fixed number of bins. So within one storage type there will be approximately 300 sections.
As per your advice I should go for Sections for grouping of bins.
Is there any other way we can do it, as asked by me in my query, i.e. within one section, gouping of bins.
Regards,
Manish -
How to Limit the Grouped(through Bins) values in Pivot View
Hi All,
we have a column category which contains operational,staffing and allocation categories.
in our requirement we need to group operational and staffing as group1 and the allocations as the other group2.i have grouped this using bins.
our requirement is group1 should dispaly in one pivot view and group2 values should display in another pivot view.
Could any one please suggest on this.
NOTE: I have tried this with new calculated item option in pivot view but its unable to display character values.
Thank You,
Suhasini.
Edited by: user10920790 on Nov 17, 2009 4:48 AMI think the issue here is that you have bins 1,2,3 but you want to see the values displayed, not 1,2,3?
Try adding the same column again, use them next to each other in the pivot table, hide the one with the bins, what you should get is a prent and child type structure where the values are group according to the 1 2 3 in the first column.
I htink the only way to get three separate tables would be to duplicate the query 3 times, filtering the bins column by 1 then 2 etc and displaying all three tables one below the other. Alternatively, you could try putting the bins column in the section header of the pivot table to see if that splits the tables by 1 2 3 .
Sorry if this is a bit long winded, it's worth playing around with it though.
regards
Ed
Maybe you are looking for
-
How to trap Cleared document from the Flat file
Hi All, In the BDC In flat file, I am getting boths Document No ( Cleared & Non Cleared). While Uploading I need to check the Document No , which is clered is filtered & Only Those Document No which is not cleared is posted in the Transaction - F-53.
-
Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?
-
JSP : Tiles Error �tag.getAsString� : component context is not defined
JSP : Tiles Error �tag.getAsString� : component context is not defined I�m working with Struts 1.1 and Tiles, under Tomcat 5.0.16 My application works fine using Struts 1.1 alone, however, when attempting to run the application in a �Tiles� environme
-
How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?
-
NPS Management tools missing after server 2012 r2 upgrade
it appears that my nps management tools are gone! I've verified that Network Policy and Access Services is installed and running. but i'm not able to manage it. I can not find the console anywhere, it's not in the admin tools and I cannot at it thr