Bin tables in Oralce10g
Hi All ,
i have my oralce database in 10.2.0.4 in datawarehouse envirinment.The database creates a lot of tables for temporary purpose and then drops them.In this process the recycle bin sizes goes to 100 gb where as total dbsize is 400gb.My question is weather this recyclebin size of 100gb contribytes to overall cold backup time of the database? to be more specific should i clear recyclebin before cold backup so as to reduce backup time ?
Thanks in advance.
Hi again!
For a full datafile backup it doesn't matter if a block is used or not.
1.) Backup of tablespace users.
RMAN> BACKUP TABLESPACE users;
Starten backup um 23.09.2010 14:42:21
Zugewiesener Kanal: ORA_DISK_1
Kanal ORA_DISK_1: SID=157 Gerätetyp=DISK
Kanal ORA_DISK_1: Vollständiges Backup Set für Datendatei wird begonnen
Kanal ORA_DISK_1: Datendateien werden in Backup Set angegeben
Eingabe-Datendatei fno=00004 Name=/u01/app/oracle/oradata/ORCL10/users01.dbf
Kanal ORA_DISK_1: Piece 1 wird auf 23.09.2010 14:42:22 begonnen
Kanal ORA_DISK_1: Piece 1 auf 23.09.2010 14:42:23 beendet
Piece Handle=/u01/app/oracle/product/10.2.0/dbs/04lokdue_1_1 Tag=TAG20100923T144222 Kommentar=NONE
Kanal ORA_DISK_1: Backup Set vollständig, abgelaufene Zeit: 00:00:01
Beendet backup um 23.09.2010 14:42:232.) Make some changes in tablespace users.
ALTER DATABASE OPEN;
CREATE TABLE big_emp
TABLESPACE users
AS
SELECT a.* FROM hr.employees a, hr.employees b, hr.employees c;
shutdown immediate3.) Backup tablespace users again.
RMAN> startup mount;
Oracle-Instance gestartet
Datenbank angeschlossen
Gesamte System Global Area 536870912 Byte
Fixed Size 1220432 Byte
Variable Size 150995120 Byte
Database Buffers 381681664 Byte
Redo Buffers 2973696 Byte
RMAN> BACKUP TABLESPACE users;
Starten backup um 23.09.2010 14:57:56
Kontrolldatei der Zieldatenbank wird anstelle des Recovery-Katalogs verwendet
Zugewiesener Kanal: ORA_DISK_1
Kanal ORA_DISK_1: SID=157 Gerätetyp=DISK
Kanal ORA_DISK_1: Vollständiges Backup Set für Datendatei wird begonnen
Kanal ORA_DISK_1: Datendateien werden in Backup Set angegeben
Eingabe-Datendatei fno=00004 Name=/u01/app/oracle/oradata/ORCL10/users01.dbf
Kanal ORA_DISK_1: Piece 1 wird auf 23.09.2010 14:57:57 begonnen
Kanal ORA_DISK_1: Piece 1 auf 23.09.2010 14:58:00 beendet
Piece Handle=/u01/app/oracle/product/10.2.0/dbs/05lokerl_1_1 Tag=TAG20100923T145757 Kommentar=NONE
Kanal ORA_DISK_1: Backup Set vollständig, abgelaufene Zeit: 00:00:03
Beendet backup um 23.09.2010 14:58:00You could see that there is no difference in backuptime.
Yours sincerely
Florian W.
Similar Messages
-
2.1 EA1 BIN$ tables appearing in tree broswer
Hi all,
I've upgraded to 2.1 from version 1.5.4. Everything seems to be going well but in some of my databases I am now seeing loads of BIN$ tables appearing in the tree browser, for example: BIN$/0LHlBHOQgayX35sjRi7mw==$0
Has anyone else seen this or is there a way to get the tables to disappear?
Cheers,
IanFor performance issues, tables from the recycle bin are listed by default now (before they were excluded by code).
To lose them, just apply the "Exclude recycle bin" filter (right-click the Tables node).
Have fun,
K. -
Re: How to download an internal table to application server.. Unicode
Hi..
i have populated an internal table of a big structure (custom table) which has more than 100 fields.
i wanted to download it into the application server.. as a tab de-limited file..
Can anyone guide me how to proceed with
Thanks In Advance
Guhapriyan..HI
this program will convert the internal table to the xml document
Report ZPRUEBA_MML_13 *
Export an internal table to XML document *
NO BORRAR ESTE CODIGO *
REPORT Z_table_xml.
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
TYPES: BEGIN OF TURNOS,
LU LIKE T552A-TPR01,
MA LIKE T552A-TPR01,
MI LIKE T552A-TPR01,
JU LIKE T552A-TPR01,
VI LIKE T552A-TPR01,
SA LIKE T552A-TPR01,
DO LIKE T552A-TPR01,
END OF TURNOS.
TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
NUMERO LIKE PERNR-PERNR,
REPOSICION LIKE PA0050-ZAUVE,
NOMBRE LIKE PA0002-VORNA,
TURNOS TYPE TURNOS,
END OF SOCIO.
TYPE SOCIO *
ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
SOCIO TYPE SOCIO,
END OF ACCESOS.
ESTRUCTURA ACCESOS *
START OF SELECTION *
START-OF-SELECTION.
PERFORM LLENA_ACCESOS.
PERFORM DESCARGA_XML.
END-OF-SELECTION.
END OF SELECTION *
FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
FORM LLENA_ACCESOS *
FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = GK_RUTA
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM DESCARGA_XML *
u can check the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/conversion of abap data to xml.doc
Regards,
Naveen -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
Hi Friends,
See the followong code which converts xml data into itab.
*& Report ZTEST_XML1 *
REPORT ZTEST_XML1 .
*PURPOSE: This program transfers XML data into SAP internal table format
*The nodes in DOM can be stored as fields in SAP Internal table
type pool definitions
TYPE-POOLS: ixml. "iXML Library Types
type definitions
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
*t_xml_line
l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string. " String to hold filename
data: begin of i_final occurs 0,
pnumber(20),
pname(50),
pdes(70),
end of i_final.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'C:\product.xml'.
Validation of XML file: Only DTD included in XML document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
start of selection
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
Wrap the table containing the file into a stream.
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Creating a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val = 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) <> 0.
IF l_parser->num_errors( ) <> 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
text
<--P_L_XML_TABLE_SIZE text
<--P_L_XML_TABLE text
FORM get_xml_table CHANGING p_l_xml_table_size
p_l_xml_table.
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
Upload file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement
= space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. " get_xml_table
*& Form process_dom
text
-->P_L_DOCUMENT text
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE:/.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL.
EXIT.
ENDIF.
Create a node iterator
iterator = node->create_iterator( ).
Get current node
node = iterator->get_next( ).
Loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
Advance to next node
node = iterator->get_next( ).
ENDWHILE.
*delete adjacent duplicates from i_final.
*loop at i_final.
*write:/ i_final-pnumber,i_final-pname,i_final-pdes.
*endloop.
*if not i_final[] is initial.
*modify ztestproduct from table i_final.
*endif.
ENDFORM. " process_dom
in the above code at line no: 268 there is a method:
value = node->get_value( ).in which actual data from XML file is coming.
So the varibale "Value" contains the data.
see line no: 270:
WRITE: AT indent value COLOR COL_GROUP INVERSE.
what ever values i am getting here i want to append to a Internal table ...
Can any body tell me how to do that?
i am sure of reward points.Hai Ravi
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:\xx.xml'
TABLES
data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[].
Regards
Sreeni -
Generating an XML Document from an internal table in ABAP
Good day to all of you;
With ABAP, in the R/3 system, I'm trying to figure out a way to accomplish the following:
1) SELECT a set of Purchase Order data into an internal table.
2) Generate an XML document, containing the above data, using a specific schema.
I've been playing around with function module SAP_CONVERT_TO_XML_FORMAT which has the following interface:
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = ''
I_LINE_HEADER = ''
I_FILENAME = v_fname
I_APPL_KEEP = ''
I_XML_DOC_NAME = v_docname
IMPORTING
PE_BIN_FILESIZE = v_byte
TABLES
I_TAB_SAP_DATA = i_SapData
CHANGING
I_TAB_CONVERTED_DATA = i_XMLData
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2.
I'm uncertain as to whether or not the Export parameter, I_XML_DOC_NAME refers to some schema or definition and therefore have been excluding it. In doing so, the generated XML document seems to use the field name/type information from my itab for the tags.
If this function module requires an XML Document Name, how do I create one and where do I store it in R/3? If this is not the recommended solution, is anyone familiar with a way to load an XML schema, retrieve some data then have SAP generate an XML document using the schema?
Many thanks for any help available.
THai Phillips
Try with the following Code
This program exports an internal table to an XML file.
Report ZPRUEBA_MML_13 *
Export an internal table to XML document *
NO BORRAR ESTE CODIGO *
REPORT ZPRUEBA_MML_13.
PANTALLA SELECCION *
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
PANTALLA SELECCION *
TYPE TURNOS *
TYPES: BEGIN OF TURNOS,
LU LIKE T552A-TPR01,
MA LIKE T552A-TPR01,
MI LIKE T552A-TPR01,
JU LIKE T552A-TPR01,
VI LIKE T552A-TPR01,
SA LIKE T552A-TPR01,
DO LIKE T552A-TPR01,
END OF TURNOS.
TYPE TURNOS *
TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
NUMERO LIKE PERNR-PERNR,
REPOSICION LIKE PA0050-ZAUVE,
NOMBRE LIKE PA0002-VORNA,
TURNOS TYPE TURNOS,
END OF SOCIO.
TYPE SOCIO *
ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
SOCIO TYPE SOCIO,
END OF ACCESOS.
ESTRUCTURA ACCESOS *
START OF SELECTION *
START-OF-SELECTION.
PERFORM LLENA_ACCESOS.
PERFORM DESCARGA_XML.
END-OF-SELECTION.
END OF SELECTION *
FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
FORM LLENA_ACCESOS *
FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = GK_RUTA
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM DESCARGA_XML *
Thanks & regards
Sreenivasulu P -
Xml data to abap internal table
I'm presently working on a interface where data in abap internal table is converted into xml format and placed in the frontend and vice versa.
I'm through with the first part and in secodn part also I'm able to transfer the data from frontend to Document Object Model(DOM) by parsing but finally am not able to put it into an internal table.
Please help (Urgent).
Thanks and regards,
S.K.TripathyHi sitakant,
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:\xx.xml'
TABLES
data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
regards,
amit m. -
Redaing an XML file to an internal table
hi ,
I want to import an XML file in an interface program for ABAP. I was looking for an optimal method of parsing and reading the XML data to an intrenal table so that I can display errors corresponding to invidual records.
SangeetHai Sangeeta
go through the following Code
This program exports an internal table to an XML file.
Report ZPRUEBA_MML_13 *
Export an internal table to XML document *
NO BORRAR ESTE CODIGO *
REPORT ZPRUEBA_MML_13.
PANTALLA SELECCION *
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
PANTALLA SELECCION *
TYPE TURNOS *
TYPES: BEGIN OF TURNOS,
LU LIKE T552A-TPR01,
MA LIKE T552A-TPR01,
MI LIKE T552A-TPR01,
JU LIKE T552A-TPR01,
VI LIKE T552A-TPR01,
SA LIKE T552A-TPR01,
DO LIKE T552A-TPR01,
END OF TURNOS.
TYPE TURNOS *
TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
NUMERO LIKE PERNR-PERNR,
REPOSICION LIKE PA0050-ZAUVE,
NOMBRE LIKE PA0002-VORNA,
TURNOS TYPE TURNOS,
END OF SOCIO.
TYPE SOCIO *
ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
SOCIO TYPE SOCIO,
END OF ACCESOS.
ESTRUCTURA ACCESOS *
START OF SELECTION *
START-OF-SELECTION.
PERFORM LLENA_ACCESOS.
PERFORM DESCARGA_XML.
END-OF-SELECTION.
END OF SELECTION *
FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
FORM LLENA_ACCESOS *
FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = GK_RUTA
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM DESCARGA_XML *
Thanks & regards
Sreenivasulu P -
Code to transfer xml file to abap internal table using transformation
Hi friends
Given the following xml file .the requirementis to display and transfer the xml file to internal table usin transformation and gui_upload.If any onehaving simple code on this please send .
Can any one sugest the steps to be followed to write source code using simple transformation.
<?xml version="1.0" encoding="utf-8" ?>
- <Negara>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>500</ZCODE>
<ZDESC>Pening Lalat</ZDESC>
<ZSAPCD>T1</ZSAPCD>
</COUNTRY>
</item>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>600</ZCODE>
<ZDESC>Pening Lalat2</ZDESC>
<ZSAPCD>T2</ZSAPCD>
</COUNTRY>
</item>
</Negara>
Thaking Youhi..
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:\xx.xml'
TABLES
data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[].
<b>Reward points if useful</b>
Regards
Ashu -
Upload xml file to internal table only using simple transformation
Hi Friends
How to write transformation code for the following xml data.. Please let me know immedately if any one know..
I have written as following but i encountered an eror staating -
Iam facing the following error
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_ST_REF_ACCESS', was not caught in
procedure "UPLOAD_XML" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The goal was to access variable "ROOT1". However, this access was not
possible.
Go through my xml file , the code and code in simple transformation.. Please reply(transformation code) me as soon as possible
- <Negara>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>500</ZCODE>
<ZDESC>Pening Lalat</ZDESC>
<ZSAPCD>T1</ZSAPCD>
</COUNTRY>
</item>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>600</ZCODE>
<ZDESC>Pening Lalat2</ZDESC>
<ZSAPCD>T2</ZSAPCD>
</COUNTRY>
</item>
</Negara>
DATA : BEGIN OF XDATA OCCURS 0,
STR(255) TYPE C,
END OF XDATA.
DATA: XMLUPL TYPE string .
DATA : BEGIN OF ITAB OCCURS 0,
MANDT(3) TYPE C,
ZCODE(3) TYPE C,
ZDESC(15) TYPE C,
ZSAPCD(2) TYPE C,
END OF ITAB.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\country.xml'
FILETYPE = 'BIN'
TABLES
DATA_TAB = XDATA.
LOOP AT XDATA.
CONCATENATE XMLUPL XDATA-STR INTO XMLUPL.
ENDLOOP.
CALL TRANSFORMATION ('Y_XMLCTRY')
SOURCE XML XMLUPL
result xml = ITAB[].
BREAK-POINT.
<?sap.transform simple?>
<tt:transform template="temp1"
xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ROOT1"/>
<tt:root name="ROOT2"/>
<tt:template name="temp1">
<Negara>
<tt:loop ref=".ROOT1" name="i">
<item>
<tt:loop ref=".ROOT2" name="c">
<COUNTRY>
<MANDT>
<tt:value ref="$c.nummer" />
</MANDT>
<ZCODE>
<tt:value ref="$c.nummer" />
</ZCODE>
<ZDESC>
<tt:value ref="$c.name" />
</ZDESC>
<ZSAPCD>
<tt:value ref="$c.name" />
</ZSAPCD>
</COUNTRY>
</tt:loop>
</item>
</tt:loop>
</Negara>
</tt:template>
</tt:transform>
Thanking You
DeviHi Friends
How to write transformation code for the following xml data.. Please let me know immedately if any one know..
I have written as following but i encountered an eror staating -
Iam facing the following error
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_ST_REF_ACCESS', was not caught in
procedure "UPLOAD_XML" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The goal was to access variable "ROOT1". However, this access was not
possible.
Go through my xml file , the code and code in simple transformation.. Please reply(transformation code) me as soon as possible
- <Negara>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>500</ZCODE>
<ZDESC>Pening Lalat</ZDESC>
<ZSAPCD>T1</ZSAPCD>
</COUNTRY>
</item>
- <item>
- <COUNTRY>
<MANDT>600</MANDT>
<ZCODE>600</ZCODE>
<ZDESC>Pening Lalat2</ZDESC>
<ZSAPCD>T2</ZSAPCD>
</COUNTRY>
</item>
</Negara>
DATA : BEGIN OF XDATA OCCURS 0,
STR(255) TYPE C,
END OF XDATA.
DATA: XMLUPL TYPE string .
DATA : BEGIN OF ITAB OCCURS 0,
MANDT(3) TYPE C,
ZCODE(3) TYPE C,
ZDESC(15) TYPE C,
ZSAPCD(2) TYPE C,
END OF ITAB.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\country.xml'
FILETYPE = 'BIN'
TABLES
DATA_TAB = XDATA.
LOOP AT XDATA.
CONCATENATE XMLUPL XDATA-STR INTO XMLUPL.
ENDLOOP.
CALL TRANSFORMATION ('Y_XMLCTRY')
SOURCE XML XMLUPL
result xml = ITAB[].
BREAK-POINT.
<?sap.transform simple?>
<tt:transform template="temp1"
xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ROOT1"/>
<tt:root name="ROOT2"/>
<tt:template name="temp1">
<Negara>
<tt:loop ref=".ROOT1" name="i">
<item>
<tt:loop ref=".ROOT2" name="c">
<COUNTRY>
<MANDT>
<tt:value ref="$c.nummer" />
</MANDT>
<ZCODE>
<tt:value ref="$c.nummer" />
</ZCODE>
<ZDESC>
<tt:value ref="$c.name" />
</ZDESC>
<ZSAPCD>
<tt:value ref="$c.name" />
</ZSAPCD>
</COUNTRY>
</tt:loop>
</item>
</tt:loop>
</Negara>
</tt:template>
</tt:transform>
Thanking You
Devi -
XML file to Internal table through XSLT - Call Transformation
Hi Friends,
I am trying to work a scenario where i have a simple XML file and i need to convert the data in to an internal table. When i execute the XSLT seperately, it works fine. I get the output, but when it is invoked through a ABAP program, i am getting the error "The called method START_XSLT_DEBUGGER of the calss CL_WB_XSLT_DEBUGGER returned the exception CX_XSLT_FORMAT_ERROR"
I feel my XSLT program is not correct, but i am unable to find out what the issue is. Any help is really apreciated. I have gone through the SDN forum replies. But could not figure out what is wrong with my program
Below given are the details.
My XML File:
<?xml version="1.0" encoding="utf-8"?>
<List>
<ITEM>
<ITEMQUALF>ITEM1</ITEMQUALF>
<MATERIAL>MAT1</MATERIAL>
</ITEM>
<ITEM>
<ITEMQUALF>ITEM2</ITEMQUALF>
<MATERIAL>MAT2</MATERIAL>
</ITEM>
<ITEM>
<ITEMQUALF>ITEM3</ITEMQUALF>
<MATERIAL>MAT3</MATERIAL>
</ITEM>
</List>
My XSLT program:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:asx="http://www.sap.com/abapxml" exclude-result-prefixes="asx" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:output encoding="utf-8" indent="yes" omit-xml-declaration="yes"/>
<!--xsl:template match="/"-->
<xsl:template match="List">
<asx:abap version="1.0">
<asx:values>
<T_ACTUAL>
<xsl:for-each select="*">
<ITEMQUALF>
<xsl:value-of select="ITEMQUALF" />
</ITEMQUALF>
<MATERIAL>
<xsl:value-of select="MATERIAL" />
</MATERIAL>
</xsl:for-each>
</T_ACTUAL>
</asx:values>
</asx:abap>
</xsl:template>
</xsl:transform>
In my ABAP program:
REPORT z_xslt_abap_2.
TYPES:
BEGIN OF ty_actual,
itemqualf TYPE char50,
material TYPE char50,
END OF ty_actual,
line_t(4096) TYPE x,
table_t TYPE STANDARD TABLE OF line_t,
ty_t_actual TYPE STANDARD TABLE OF ty_actual.
DATA:
t_actual TYPE ty_t_actual,
t_srctab TYPE table_t,
v_filename TYPE string.
DATA: gs_rif_ex TYPE REF TO cx_root,
gs_var_text TYPE string.
v_filename = 'D:\XML\xslt_test.xml'.
* Function call
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_filename
filetype = 'BIN'
TABLES
data_tab = t_srctab
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Call Transformation
TRY.
CALL TRANSFORMATION (`ZXSLT_RAM`)
SOURCE XML t_srctab
RESULT t_actual = t_actual.
CATCH cx_root INTO gs_rif_ex.
gs_var_text = gs_rif_ex->get_text( ).
MESSAGE gs_var_text TYPE 'E'.
ENDTRY .
IF t_actual IS NOT INITIAL.
WRITE: 'Success'.
ENDIF.
When i run the XSLT program seperately, this is the output that i get:
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<T_ACTUAL>
<ITEMQUALF>ITEM1</ITEMQUALF>
<MATERIAL>MAT1</MATERIAL>
<ITEMQUALF>ITEM2</ITEMQUALF>
<MATERIAL>MAT2</MATERIAL>
<ITEMQUALF>ITEM3</ITEMQUALF>
<MATERIAL>MAT3</MATERIAL>
</T_ACTUAL>
</asx:values>
</asx:abap>
I have been stuck with this for more than two days. If anyone can help me out with this, it would be really great. Please let me know, where i am going wrong.
Thanks in advance.
Best Regards,
Ram.Hi,
You can try this sample program, hopefully will help you.
<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/readdatafromXMLfileviaXSLT+program&">Read Data From XML</a>.
Regards, -
How to convert internal table data to text
data : RES_CONTEN type string.
My problem is in inernal table IT_COMM there will be 7 to 8 rows of data is there
when iam sending into Res_content it is showing only last row of IT_COMM
there after iam converting into Ftext, after that iam creating document.
what i have to do get complete data of IT_COMM
is there any standard RFC is ther to convert table to text ?
right now iam getting only last line (total 8 rows )
LOOP AT IT_COMM.
CONCATENATE IT_COMM ' ' INTO RES_CONTENT SEPARATED BY SPACE.
ENDLOOP.
CONLENGTH = STRLEN( RES_CONTENT ) .
CONLENGTHS = CONLENGTH .
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = RES_CONTENT
TABLES
FTEXT_TAB = TEXT.
TRY.
CLEAR SEND_REQUEST .
SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
CLEAR DOCUMENT .
DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
I_TYPE = 'RAW'
I_TEXT = TEXT
I_LENGTH = CONLENGTHS
I_SUBJECT = SUBJECT ).
Thanks in advanceHi,
Refer to the following code:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = binfile
filename = 'D:\MYFILE.txt'
FILETYPE = 'BIN'
tables
data_tab = pdftab
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to use gui_download 's filetype of 'bin'
Hello,experts ,the detail of my problem as follows:
I use gui_download to download the invoice data :filetype is ASC,the download file is .txt file with tab as the field 's separator.
the internal table:i_khzl :DATA: BEGIN OF i_khzl OCCURS 0, "ITAB OF HEAD INFO.
fpdm(15), "invoice no
tdh(15),
khswdjh(15), "
khmc type TEXT100,
" khmc(100), "customer
khdz(100), "
khyh(100),
bz(100), "
qdhj(1),
jmhj(1),
fphm(18),
END OF i_khzl.
but there is not a Chinese characters like"燊" in the codepage 8400, which result in the customer name display as wrong ,the last byte is '?', and the I download the data using filetype of BIN ,the ? of customer name is gone,but the local file .txt the format is wrong, which the interface of the invocie system can not confirmed.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = g_fname
filetype = 'ASC'
write_field_separator = 'X'
trunc_trailing_blanks = 'X'
"codepage = '4102'
TABLES
data_tab = i_khzl
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE e003 WITH g_fname. "下载文件错误
ENDIF.
the bin download:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = g_fname
filetype = 'BIN'
TABLES
data_tab = i_khzl
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE e003 WITH g_fname. "下载文件错误
ENDIF.
THE CONTENT OF THE LOCAL TXT IS :
ASC:
0491052960 451281672481214 宜州市燊龙贸易有限责任公?
BIN:0491052960 451281672481214宜州市燊龙贸易有限责任公司
the format of the two txt content is different, how to change the bin 's type to asc' type ?or how to use the gui_download function to solve the wrong display of the customer name?
pls help me ,
much appreciated.Dear Pradeep,
Find the below link which explains a simple data download to excel from a table view.
www.sapt echnical.com/Tutorials/BSP/Excel/Index.htm
Try to avoid the way your using in the BSP application and it is abdicable to use the standard methods / class available like "cl_bsp_utility"
Hope this will be helpful.
Regards,
Gokul.N
Edited by: Gokul on Oct 8, 2009 9:57 AM -
Create Spool from Internal table & converrt the spool to PDF
Hi All,
My requirement is take data from a table and find amount specific to each Vendors . So I took all the data into ITAB and do all the calculation. Later after calculation I have to create a spool from this ITAB and this spool have to convert to PDF. Later this PDF have to seend via email.
To convert the internal table to Spool , I used
LOOP AT t_summ INTO wa_summ.
w-amount = wa_summ-remittanceamount.
CONCATENATE wa_summ-vendorcode
wa_summ-controlnum
w-amount INTO wa_textdata SEPARATED BY space.
APPEND wa_textdata TO t_textdata.
ENDLOOP.
DESCRIBE TABLE t_textdata .
w-file_length = syst-tfill * 1022.
l_doctype = 'LIST'.
l_layout = 'X_POSTSCRIPT'.
CONCATENATE ' Listbill Summary Report for' syst-datum INTO
l_title SEPARATED BY space.
l_receiver = syst-uname.
* Create Spool
CALL FUNCTION 'RSPO_SR_OPEN'
EXPORTING
dest = 'LOCL'
* LDEST =
layout = l_layout
name = 'SUMREP'
* SUFFIX1 =
* SUFFIX2 =
copies = '1'
* PRIO =
* immediate_print = ' '
* AUTO_DELETE =
titleline = l_title
receiver = syst-uname "
* division = l_pri_params-prabt " abteilung
* authority = l_pri_params-prber "
* POSNAME =
* ACTTIME =
* LIFETIME = '8'
* APPEND =
* COVERPAGE =
* CODEPAGE =
doctype = l_doctype
* ARCHMODE =
* ARCHPARAMS =
* TELELAND =
* TELENUM =
* TELENUME =
IMPORTING
handle = l_spool_handle
spoolid = w-spoolid
EXCEPTIONS
device_missing = 1
name_twice = 2
no_such_device = 3
operation_failed = 4
OTHERS = 5
. "#EC DOM_EQUAL
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'SLVC_C1022_TO_C255'
EXPORTING
i_file_length = w-file_length
TABLES
it_c1022 = t_textdata
et_c255 = lt_spool.
l_length = w-file_length.
LOOP AT lt_spool INTO ls_spool.
l_length = l_length - 255.
IF ( l_length > 0 ).
l_line_length = 255.
ELSE.
l_line_length = l_length + 255.
ENDIF.
* Write contents to spool
CALL FUNCTION 'RSPO_SR_WRITE'
EXPORTING
handle = l_spool_handle
text = ls_spool
length = l_line_length.
ENDLOOP.
* Close Spool
CALL FUNCTION 'RSPO_SR_CLOSE'
EXPORTING
handle = l_spool_handle
pages = 1
FINAL = 'X'
EXCEPTIONS
handle_not_valid = 1
operation_failed = 2
OTHERS = 3
By this I can see the spool with data in SP02.
Then to conver to PDF, I used
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = w-spoolid
no_dialog = 'X'
DST_DEVICE = 'LOCL'
* PDF_DESTINATION =
IMPORTING
* PDF_BYTECOUNT =
* PDF_SPOOLID =
list_pagecount = list_pagecount
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
pdf = t_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = 'D:\t\t.pdf'
filetype = 'BIN'
TABLES
data_tab = t_pdf
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
But later when I go and open the PDF, I am getting an error saying'Page cannot be open because it dont have any pages'
Please help me
Regards,
NikhilHi Nikhil,
<li>If you are still not able to find out the problem. You can an alternative way , which is used for the same purpose.
<li>Try this way. It creates spool and and same CONVERT_ABAPSPOOLJOB_2_PDF fm is used to convert spool to PDF. It works. Test this test program.
REPORT ztest_notepad.
DATA:g_val TYPE c,
w_pripar TYPE pri_params,
w_arcpar TYPE arc_params,
i_pdf TYPE TABLE OF tline,
spoolid LIKE tsp01-rqident,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname,
l_jobcount LIKE tbtcjob-jobcount.
DATA:it_t001 TYPE TABLE OF t001 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE it_t001.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = w_arcpar
in_parameters = w_pripar
layout = 'X_65_132'
line_count = 65
line_size = 132
no_dialog = 'X'
IMPORTING
out_archive_parameters = w_arcpar
out_parameters = w_pripar
valid = g_val.
IF g_val NE space AND sy-subrc = 0.
w_pripar-prrel = space.
w_pripar-primm = space.
NEW-PAGE PRINT ON NEW-SECTION PARAMETERS w_pripar ARCHIVE PARAMETERS w_arcpar NO DIALOG.
ENDIF.
LOOP AT it_t001.
WRITE:/ it_t001.
ENDLOOP.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
spoolid = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spoolid
no_dialog = ' '
IMPORTING
pdf_bytecount = l_no_of_bytes
pdf_spoolid = l_pdf_spoolid
btc_jobname = l_jobname
btc_jobcount = l_jobcount
TABLES
pdf = i_pdf.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\temp\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf.
Thanks
Venkat. -
Getting OTF spool into internal table
Hi experts !
I am trying to get an OTF spool into an internal table (in order to send it to a web application).
I use FM CONVERT_OTFSPOOLJOB_2_PDF :
PARAMETERS : p_spoolid LIKE tsp01-rqident.
DATA : lt_numbytes TYPE i,
lt_pdf TYPE TABLE OF tline.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = p_spoolid
IMPORTING
pdf_bytecount = lt_numbytes
TABLES
pdf = lt_pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
The table lt_pdf then contains some junk characters such as
TDFORMAT 潆
TDLINE 瑮吠䵉卅潮浲污䰠湡⁧剆਍启灹⁥䘯湯൴⼊畓
Any idea of how I can get that fixed ??
A strange thing is when I save it as a local file (for testing purpose) using GUI_DOWNLOAD, I have a nice readable PDF file ...
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = '10884'
FILENAME = 'C: est.pdf'
FILETYPE = 'BIN'
TABLES
DATA_TAB = lt_pdf
EXCEPTIONS
FILE_WRITE_ERROR = 1 ...
Thank you for your help !
Yann PortraitHi,
try to Pass parameters like this
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spoolno
NO_DIALOG = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = numbytes
PDF_SPOOLID = pdfspoolid
OTF_PAGECOUNT =
BTC_JOBNAME = jobname
BTC_JOBCOUNT = jobcount
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_OTF_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DSTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11.
Maybe you are looking for
-
Creation of purchase order using bapi
hi gurus, Can anyone give me an example of how to create purchase order using bapi
-
Tax Form SUI - Field 'Unit/Location/Plant Code'
Hi All Can some one clarify, Which field in T5UTV points to 'Unit/Location/Plant Code' in the UI reports? As we see, we have 3 options in table T5UTV; Field – Worksite (WKSIT) Field - Reporting unit no. (REPUN) Field - NC9901 establishment or NC9901
-
Search and replace nested style in JS CS3
I need to find and replace numbers at the beginning of paragraph which is styled as nestedStyle. What is the code? ST Dishon
-
Using Airport Express solely for airtunes question
I am letting my neighbor try out my airport express for airtunes but I ran into a problem setting it up. Her Mac mini Intel 1.5GHz connects to the internet through ethernet from a DSL modem. I want to put the airport express in her family room connec
-
Getting exception error - need help resolving please
I am getting the following exception when I try running a short program that user the Scanner object: Enter a number in feet: Exception in thread "main" java.util.NoSuchElementException at java.util.Scanner.throwFor(Scanner.java:817) at jav