BIT Locker Key is not working in a first attempt.

I have enabled bit locker key for my system. when I restart the system it will ask for bit locker and like how many time I enter the password it won't work and says wrong key. My friend suggested a temporary solution which is working. I have remove
keyboard before booting. after booting I have to plugin the keyboard and now the bit locker key works. I am not able find the problem. Please help.
OS : Windows 7 enterprise edition 32bit
Mallik K

Hi,
What's the type of your computer? Desktop or Laptop? Have you tried to use other keyboard to test this problem.
As In my opinion, Since it shows password input error, it should not Bitlocker encrypt problem. Maybe system couldn't identify the character you typed, maybe it is keyboard or its driver problem. It would be better to change another keyboard to check this
problem for test.
Roger Lu
TechNet Community Support

Similar Messages

Caps lock key does not work...

my caps lock key was working perfectly up until 10-15 minutes ago.
when i press my caps lock key, the little light on the key does not turn on and all of my letters remain in lowercase.
i thought perhaps something was stuck underneath the key, but when i took the key off - nothing was there. i placed it back on and still the caps lock key does not work.
does anyone have any ideas as to why the problem could be and how to fix it?

Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
Then restart.
Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

Satelite P50-A-14E - Caps lock key is not working

Hi all,
My CAPS LOCK key is not working on my Satelite P50-A-14E series laptop. Just realized while writing an email that is not working so is more or less sudden. Nothing has been spilled on it. Here is what I've checked so far:
- green light indicating that CAPS is LOCKED illuminates while pressing the key from on screen keyboard
- keyboard backlight doesn't start when I press the key but It works for the key itself when pressing any other key.
- tried a clean boot but no result.
Thanks a lot for your help.

Hi
> Just realized while writing an email that is not working so is more or less sudden.
Did you test the CAPS LOCK button using different software: internet browser, word or another editor?
How about the usage of external keyboard?
From my point of view there are two possible malfunctions: either there is some problem with the software you are using or the internal keyboard simply malfunctions and in such case the keyboard replacement will solve the problem.
You could test the external USB keyboard. In case the USB external keyboard CAPS LOCK button would functions, then the internal keyboard has to be replaced for sure.

Caps lock key is not working

i just bought my macbook air. the caps lock key is not working and the green light doesn't coem on. I tried holding it down for a while but it still didn;t work. I rebooted several times and once i held doen the cap slock during booting andthe green light came on but once it fully loaded it went off and I couldn't get it to come back on.

Hi
> Just realized while writing an email that is not working so is more or less sudden.
Did you test the CAPS LOCK button using different software: internet browser, word or another editor?
How about the usage of external keyboard?
From my point of view there are two possible malfunctions: either there is some problem with the software you are using or the internal keyboard simply malfunctions and in such case the keyboard replacement will solve the problem.
You could test the external USB keyboard. In case the USB external keyboard CAPS LOCK button would functions, then the internal keyboard has to be replaced for sure.

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

Lock key dose not work

lock key on top does not work

Open the Speech pane of System Preferences and check whether either the speech key or the listening key has become set to l; if so, change the setting.
(21460)

SHIFT key does not work - one the first letter gets capitalized

When typing a word in ALL CAPS by pressing the SHIFT key, only the first character appears in CAPS. All subsequent characters appear in lower case even though the SHIFT key is continually pressed.
The workaround is to backspace over the lower case character(s) one at a time as they are typed and type them again in CAPS, or use the CAPS LOCK key.
This problem surfaced after a string of updates (Combo 10.5.2 update; Graphics update; keyboard firmware update) and I cannot be certain which one (if any) is responsible for the snafu.
As someone who types a lot, I urgently need to have this fixed. Thanks.
Andreas

I solved the SHIFT key problem. As it turns out, it was not the result of any update or buggy piece of software code, but a conscious (albeit erroneous) decision on my part.
A few days ago, I installed a new version of TypeIt4Me and in perusing the various settings, I selected the “No DOuble CAps” option. I misinterpreted what this option would do. It modifies the behavior of the SHIFT key which I then thought was a bug in my system.
TypeIt4Me, btw, by Riccardo Ettore, is a wonderful application. I have used it for more than a decade, and I can honestly say it is the most valuable shareware utility I have ever installed on my macs. I strongly and unconditionally recommend it to all mac users.
Andreas

VB Script not working correctly the first attempt

I have a VB script that loads the active channels data into a Report.
The weird thing is that upon first run (pressing F5) of the script it does not update my Graph Data on either page of my 3 page Report (1st page has a table and the 2/3 pages have a graph). Upon the second attempt of running the script it will update the Graph on page 2 but the not on page 3 and finally one the third run of the script it will update page 3's Graph.
I added code to cycle through each sheet and bring the active sheet to the front of the Report but no change in behavior. I can simply ad a For Loop to repeat the data loading procedure 3 times but this is just bad coding in my opinion, I would like my code to be efficient.
If anyone has any ideas or similar experiences please let me know what resolution you came too. Code is below.
Thanks.
Option Explicit 'Forces the explicit declaration of all the variables in a script.
'PScript Function --- Finds the Graph or Table to be Changed and calls Subroutine
Dim iObjNo, sObjectName, sCurveName, iCurveNo, iSheetNo, aSheetName,
'---- Cycles Through the Graphic Sheets of the Report
For iSheetNo = 1 to GraphSheetCount
aSheetName = GraphSheetNGet(iSheetNo)
GraphSheetShow(aSheetName)
For iObjNo = 1 To ObjectNoMax 'Loop over all objects in DIAdem REPORT
sObjectName = ReportObj(iObjNo) 'Gets the object name
If sObjectName <> "" Then 'Ensures that the object is not deleted
Select Case ReportObjType(iObjNo) 'Gets the object type
Case "2D-Axis"
Call Change2DAxis(sObjectName) 'Calls procedure to change the objects of the 2D axis system
Case "2D-Table"
Call Change2DAxisTable(sObjectName)
Case "FreeText"
Call GraphObjMoveToForeground(sObjectName)
End Select
End If
Next
Call PicUpdate(True)
Next 'goto next sheet
' --- Procedure to change object of the 2D axis graph system ---
Sub Change2DAxis(sObjectName)
Call GraphObjOpen(sObjectName) 'Opens the 2D axis system
D2AxisColor = "blue" 'Sets the axis color
For iCurveNo = 1 To CurveNoMax 'Loop over all curves
sCurveName= D2CurveObj(iCurveNo) 'Gets the curve name
If sCurveName <> "" Then 'Ensures that curve is not deleted
Call GraphObjOpen(sCurveName) 'Opens the curve object
'--- Gets a reference to the active channel and set the data for the correct graph
If sObjectName = "DELCDgraph" Then
D2CChnYName = Data.Root.ActiveChannelGroup.Channels.Item("DELCD").GetReference(eRefTypeIndexName) 'Sets the curve to the Current Channel
End If
If sObjectName = "PIDgraph" Then
D2CChnYName = Data.Root.ActiveChannelGroup.Channels.Item("PID").GetReference(eRefTypeIndexName) 'Sets the curve to the Current Channel
End If
D2CurveColor = "red" 'Sets the curve color
Call GraphObjClose(sCurveName) 'Closes the curve object
End If
Next
Call GraphObjClose(sObjectName) 'Closes the 2D axis system
End Sub
' --- Procedure to change table object values of column 2 ---
Sub Change2DAxisTable(sObjectName)
Call GraphObjOpen(sObjectName) 'Opens the 2D axis system
If sObjectName = "DELCDtable" Then
'--- Gets a reference to the active channel
D2TabChnName(2) = Data.Root.ActiveChannelGroup.Channels.Item("Concentration").GetReference(eRefTypeIndexName)
' --- Gets references to permanant channel containing Compound Names and Units
D2TabChnName(1) = Data.Root.ChannelGroups(1).Channels("Compound").GetReference(eRefTypeIndexName)
D2TabChnName(3) = Data.Root.ChannelGroups(1).Channels("Units").GetReference(eRefTypeIndexName)
End If
If sObjectName = "PIDtable" Then
'--- Gets a reference to the active channel
D2TabChnName(2) = Data.Root.ActiveChannelGroup.Channels.Item("Concentration").GetReference(eRefTypeIndexName)
' --- Gets references to permanant channel containing Compound Names and Units
D2TabChnName(1) = Data.Root.ChannelGroups(1).Channels("Compound").GetReference(eRefTypeIndexName)
D2TabChnName(3) = Data.Root.ChannelGroups(1).Channels("Units").GetReference(eRefTypeIndexName)
End If
If sObjectName = "mainTable" Then
'--- Gets a reference to the active channel
D2TabChnName(2) = Data.Root.ActiveChannelGroup.Channels.Item("Concentration").GetReference(eRefTypeIndexName)
' --- Gets references to permanant channel containing Compound Names and Units
D2TabChnName(1) = Data.Root.ChannelGroups(1).Channels("Compound").GetReference(eRefTypeIndexName)
D2TabChnName(3) = Data.Root.ChannelGroups(1).Channels("Units").GetReference(eRefTypeIndexName)
End If
Call GraphObjClose(sObjectName) 'Closes the 2D axis system
End Sub
' --- Renames all Sheets of the current report with the Sample Name
Call GraphSheetRename("TABLE", Data.Root.ActiveChannelGroup.Name & " Table")
Call GraphSheetRename("PID", Data.Root.ActiveChannelGroup.Name & " PID")
Call GraphSheetRename("DELCD", Data.Root.ActiveChannelGroup.Name & " DELCD")
Call PicUpdate(True)
Solved!
Go to Solution.
Attachments:
TempCode.txt ‏5 KB

The recording mode is kind of a joke. Maybe it's good for 2+2 but it does not seem to record 98% of what I do. Maybe I'm missing something? It also does not seem to be variable friendly. I much prefer scripting either way.
This is what it recorded for the actions that parallel the code I attached above.
Call PicUpdate(0) '... PicDoubleBuffer
Call PicUpdate(0) '... PicDoubleBuffer
Call PicUpdate(0) '... PicDoubleBuffer
Call GRAPHSHEETRENAME("TABLE", "TABLE") '... GraphSheetName,GraphSheetNameII
Call GRAPHSHEETRENAME("TABLE", "FO.GC.212__@@CurrDate@@TABLE") '... GraphSheetName,GraphSheetNameII
Call GRAPHSHEETRENAME("FO.GC.212__@@CurrDate@@TABLE", "TABLE") '... GraphSheetName,GraphSheetNameII
So I long ago disregarded the record mode.
One more detail about my above problem is that all my problems started when I moved from DIAdem Evaluation (which I believe is the Pro edition) to DIAdem Advanced edition. When I originally wrote the script in Evaluation Edition it worked great, everytime. Once I purchased DIAdem and ran the script on Advanced Edition, I began having the problems with the curves not updating their data properly every script cycle.
Thanks.

The caps lock and p key does not work

All of a sudden my "p" key and "caps Lock" key are not working. tried pram and smc resets but does not help. Want to know if it is a hard ware or a software issue. Im using a a MAC Book Pro that i bought ony 15 days back

First assumption: its faulty wiring, judging by this being your first post, im guessing its a new mac? Id call apple or replace it at the store you got it from if you didnt buy through online or applestore.

My apple lock key is not workig,what is do?

Dear Sir,
Am usiung the apple iphone 5 , from last day my iphone lock key is not working, so kindly update me.
With regards
SAJAN CHERIAN

Do you mean your passcode does not unlock screen
If so
http://support.apple.com/kb/HT1212

The A key is not working and I can't lock my phone,

The A key is not working all other keys are working. Updated software but still have the same problem. This code also came up at around the same time ! uncaught exception: index 3 >=3. Can anyone help.

Hey Lizziebear,
Welcome to the BlackBerry Support Community Forums.
The uncaught exception error you're receiving can be resolved by performing a clean reload of the BlackBerry Device software.
Follow all the steps in this KB article: www.blackberry.com/btsc/KB11320
Note: Make sure you create a backup first as this will erase all your data.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

Keyboard keys are not working

Im on mac OS X 10.6.8 several keyboard keys are not working. For instance the at symbol is not working or question mark and random other punctuation keys. The problem started after running some code from terminal to trun off mouse acceleration and then installing a plug-in to control more accurately the mouse funtions. Ive since uninstalled the plug in and disabled the adjustment in terminal. Ive checked all the normal keyboard funcions to make sure settings were not funky. When I log out and log in as a differnt user the problem with the keyboard is fixed. Someone please help
Code I ran
defaults write .GlobalPreferences com.apple.mouse.scaling -1
http://www.lockergnome.com/osx/2011/07/13/how-to-turn-off-mouse-acceleration-in- os-x/

Hello lindzthecreator,
I suggest this part of the article named One or more keys on the keyboard do not respond found here http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
All the very best,
Sterling

Tab key is not working on my macbook pro on any app including the key combos. It has snow leopard.

Hi All,
I have a macbook pro with snow leopard on it. The tab key is not working now suddenly. It doesn't work on any browser or applications like word or excel. The key combos with Tab also doesn't work.
Thanks,
Daniel.

I noticed the same problem started a few days ago on mac pro with logic fcp keyboard but caps lock also stopped working. I cleaned under and around the tab and caps lock keys thoroughly but no dice. If I change usb ports the keyboard is plugged into caps lock lights up briefly and if I tweak keyboard setting tabs to force it to re-recognise the keyboard the tab and caps lock functions work while I have the keyboard system panel open and attempting to "identify keyboard" but back to not functioning when I close it. There have been a few postings about this problem but haven't come across the solution yet. Any ideas...

My arrow keys are not working inside flash games

Hello,
Whenever I play any flash game, my arrow keys are not working. They work perfectly fine when I am scrolling the site with them, but not in flash games.
I am using Google Chrome, flash player version 10,3,181,36 and my operating system is Win7 64 bit.
Solutions I've already tried:
Use another webbrowser
Re-install Flash player
Restart PC
Try another keyboard
I have this problem ever since the last Flash Player update.

Hey there Questionair1.
It sounds like your arrow keys are not working correctly. I would start with these steps from the following article named:
OS X Mavericks: If keys on your keyboard don’t work
http://support.apple.com/kb/PH13809
You may have accidentally set an option that changes how your keyboard operates.
Choose Apple menu > System Preferences, click Dictation & Speech, then click “Text to Speech.” If “Speak selected text when the key is pressed” is selected, deselect it or click Change Key to select another key.
Choose Apple menu > System Preferences, click Accessibility, then click Keyboard. Make sure Slow Keys is turned off. If Slow Keys is on, you must hold down a key longer than usual before it’s recognized.
Thank you for using Apple Support Communities.
All the best,
Sterling

BIT Locker Key is not working in a first attempt.

Similar Messages

Maybe you are looking for