BizTalk and Ws-ReliableMessaging

Hi guys,
I am having difficulty finding details on how/if BizTalk 2006 R2 supports ws-reliablemessaging or Ws-Reliability.
Could someone provide details?
Further, for other WS-* standards, where can I find out what is supported by BizTalk and how they are implimented?
Kind regards
TM

Since BizTalk 2006 R2 can use WCF, it supports WS-ReliableMessaging, as documented here: http://msdn2.microsoft.com/en-us/library/aa480191.aspx. As for other WS-* standards, much of this was implemented in WSE and then in WCF. An overview of WCF mentions its support for WS-*: http://msdn2.microsoft.com/en-us/library/ms731082.aspx. WS-Security and some other ones are described here: http://msdn2.microsoft.com/en-us/library/ms788756.aspx.
Thanks,

Similar Messages

Biztalk and whitespace preservation

I am having issue with BizTalk SOAP adapter calling web service and non whitespace preservation in outgoing message.
Below is message which going from BizTalk to a web service, please note Field2 is having blank space.
<ns0:Root xmlns:ns0="http://BizTalk_Server_Project.source1">
<Field1>TestField1</Field1>
<Field2> </Field2>
</ns0:Root>
But destination web service is receiving below message with Field2 without blank space (empty node).
<ns0:Root xmlns:ns0="http://BizTalk_Server_Project.source1">
<Field1>TestField1</Field1>
<Field2 />
</ns0:Root>
I have examined tracked message in send port (after request message after port processing) in BizTalk and message in having Field2 with blank space but when message hits wire Field2 is without blank space(empty node) which I have examined with help of Fiddler.
I have tested Send Port with configured as pass through pipeline and XML Transmit.
How can stop this behavior in BizTalk not ignore blank space in xml elements?
Thanks for help.
Thanks,
Kishore Menta

hi Kishore,
How were you able to add the xml:space .. when I add it in my schema of my BizTalk project.. it says.. it cannot be added there.
To give the complete context.. we were supposed to interact with a service which has a legacy app and needs a fixed length data in few of the fields.. When we are putting in the spaces in the xml, it is getting lost when going thru the map.
We are trying to avoid any Registry setting (related to LegacyWhiteSpace .. which specified in some other post), since it would affect the entire BizTalk environment and we are not sure what all flows might break.
If I say that I want sname to retain space characters in the below.. what are all my options.. what changes in the schema.
<?xml version="1.0" encoding="utf-16"?>
<xs:schema xmlns="http://SpaceTest.SampleStudent" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://SpaceTest.SampleStudent" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="SampleStudent">
<xs:complexType>
<xs:sequence>
<xs:element name="sno" type="xs:string" />
<xs:element name="sname" type="xs:string" />
<xs:element name="marks" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
We are using BizTalk 2010.. and probably no cumulative updates on it.
Thanks in advance.
Praveen Behara
MCST : BizTalk Server 2006 R2, 2010

JAX-WS proxy and WS-ReliableMessaging

Hello all,
JDeveloper 11.1.2.3
I've started the foray into looking at reliable web services as specified by WS-ReliableMessaging. I have a very simple Hello World web service deployed (it was written in C# and deployed on IIS, if you have to ask :P). In JDeveloper, I've generated a JAX-WS Style proxy and test class using the JDeveloper wizard to do so. I've specified that no Async methods be generated and that there are no client OWSM policies (none are deemed compatible with the web service anyway).
I then add a bit of code to my test class and run to test. The first time I run the class, the WS calls work successfully, although after the sequence of calls, I get an exception displayed in the console (see below). If I try to run the class again, the web service calls don't even execute and I get a different exception in the console (again, see below - at least part of this error is captured by my ReliabilityErrorListener). This sequence of events alternates ad-infinitum (odd-numbered attempts work with an exception, even-numbered attempts don't work.
I show my test code here:
      // Add your code to call the desired methods.
    WsrmClientInitFeature f = new WsrmClientInitFeature(true);
    ReliabilityErrorListener listener = new ReliabilityErrorListener()
      public void onReliabilityError(ReliabilityErrorContext context)
        // At a *minimum* do this
        System.out.println("RM sequence failure: " + context.getFaultSummaryMessage());
        // And optionally do this...
        // The context parameter tells you whether a request or the entire
        // sequence has failed. If a sequence fails, you'll get a notification
        // for each undelivered request (if any) on the sequence.
        if (context.isRequestSpecific())
          // We have a single request failure (possibly as part of a larger
          // sequence failure).
          // We can get the original request back like this:
          String operationName = context.getOperationName();
          System.out.println("Failed to deliver request for operation '" + operationName + "'. Fault summary: " +
                             context.getFaultSummaryMessage());
        else
          // The entire sequence has encountered an error.
          System.out.println("Entire sequence failed: " + context.getFaultSummaryMessage());
    f.setErrorListener(listener);
    hello = helloService.getWSHttpBindingHello(f);
    WsrmClient c = WsrmClientFactory.getWsrmClientFromPort(hello);
    System.out.println("Sequence ID is " + c.getSequenceId());
    //   c.reset();
    System.out.println(hello.getGreeting("John"));
    System.out.println(hello.getGreeting("Fred"));
    System.out.println(hello.getGreeting("Josephine"));
    System.out.println("Sequence ID is " + c.getSequenceId());
    try
      System.out.println(c.getAckRanges().first().lowerBounds);
      System.out.println(c.getAckRanges().first().upperBounds);
    catch (Exception e)
    // c.setFinalMessage();The calls that work look like this in the console:
Sequence ID is null
<05-Mar-2013 14:55:53 o'clock EAT> <Info> <Store> <BEA-280008> <Opening the persistent file store "weblogic.wsee.persistence.WseeFileStore" for recovery: directory=C:\JDeveloper\11.1.2.3\mywork\WSReliableClientPOC\Client requestedWritePolicy="Cache-Flush" fileLockingEnabled=true driver="NIO".>
<05-Mar-2013 14:55:53 o'clock EAT> <Info> <Store> <BEA-280009> <The persistent file store "weblogic.wsee.persistence.WseeFileStore" (569ea4fb-b0fd-4906-bb74-003b6885b1d5) has been opened: blockSize=512 actualWritePolicy="Cache-Flush(single-handle-non-direct)" explicitIOEnforced=false records=57.>
Hello, John. You have just communicated with me using WS-reliablemessaging
Hello, Fred. You have just communicated with me using WS-reliablemessaging
Hello, Josephine. You have just communicated with me using WS-reliablemessaging
Sequence ID is uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffd
1
3
<05-Mar-2013 14:56:03 o'clock EAT> <Error> <WseeRm> <BEA-224016> <An unexpected error occurred: weblogic.wsee.sender.api.ConversationNotFoundException: [WseeSender:221102]The conversation with the given name (uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd) could not be found.
weblogic.wsee.sender.api.ConversationNotFoundException: [WseeSender:221102]The conversation with the given name (uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd) could not be found.
     at weblogic.wsee.sender.DefaultProvider.DefaultSendingServiceProvider.getConversation(DefaultSendingServiceProvider.java:222)
     at weblogic.wsee.sender.DefaultProvider.DefaultSendingServiceProvider.stopConversation(DefaultSendingServiceProvider.java:287)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:257)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:30)
     at weblogic.wsee.reliability2.store.SequenceStore.removePhysicalStore(SequenceStore.java:109)
     at weblogic.wsee.persistence.LogicalStore.close(LogicalStore.java:955)
     at weblogic.wsee.persistence.LogicalStore.closeLogicalStores(LogicalStore.java:402)
     at weblogic.wsee.persistence.LogicalStore.closeStore(LogicalStore.java:384)
     at weblogic.wsee.persistence.LogicalStore.closeAllStores(LogicalStore.java:365)
     at weblogic.wsee.persistence.LogicalStore$1.run(LogicalStore.java:164)
>
<05-Mar-2013 14:56:03 o'clock EAT> <Error> <WseePersist> <BEA-221000> <An unexpected error occurred: java.lang.IllegalStateException: Attempt to remove listener from weblogic.wsee.reliability2.sequence.SourceSequence@6ac27081 - uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd when it is not the master instance
java.lang.IllegalStateException: Attempt to remove listener from weblogic.wsee.reliability2.sequence.SourceSequence@6ac27081 - uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd when it is not the master instance
     at weblogic.wsee.reliability2.sequence.Sequence.removePropertyChangeListener(Sequence.java:1250)
     at weblogic.wsee.reliability2.store.SequenceMap.shutdownSequence(SequenceMap.java:558)
     at weblogic.wsee.reliability2.store.TimedSequenceMap.shutdownSequence(TimedSequenceMap.java:182)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:274)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:30)
     at weblogic.wsee.reliability2.store.SequenceStore.removePhysicalStore(SequenceStore.java:109)
     at weblogic.wsee.persistence.LogicalStore.close(LogicalStore.java:955)
     at weblogic.wsee.persistence.LogicalStore.closeLogicalStores(LogicalStore.java:402)
     at weblogic.wsee.persistence.LogicalStore.closeStore(LogicalStore.java:384)
     at weblogic.wsee.persistence.LogicalStore.closeAllStores(LogicalStore.java:365)
     at weblogic.wsee.persistence.LogicalStore$1.run(LogicalStore.java:164)
>
Process exited with exit code 0.The calls that don't work look like this:
Sequence ID is null
<05-Mar-2013 14:57:49 o'clock EAT> <Info> <Store> <BEA-280008> <Opening the persistent file store "weblogic.wsee.persistence.WseeFileStore" for recovery: directory=C:\JDeveloper\11.1.2.3\mywork\WSReliableClientPOC\Client requestedWritePolicy="Cache-Flush" fileLockingEnabled=true driver="NIO".>
<05-Mar-2013 14:57:49 o'clock EAT> <Info> <Store> <BEA-280009> <The persistent file store "weblogic.wsee.persistence.WseeFileStore" (569ea4fb-b0fd-4906-bb74-003b6885b1d5) has been opened: blockSize=512 actualWritePolicy="Cache-Flush(single-handle-non-direct)" explicitIOEnforced=false records=59.>
RM sequence failure:
weblogic.wsee.sender.api.PermanentSendException: javax.xml.ws.WebServiceException: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
Failed to deliver request for operation 'GetGreeting'. Fault summary:
weblogic.wsee.sender.api.PermanentSendException: javax.xml.ws.WebServiceException: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
Exception in thread "main" java.lang.AssertionError: weblogic.wsee.sender.api.PermanentSendException: javax.xml.ws.WebServiceException: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:689)
     at com.sun.xml.ws.client.Stub.process(Stub.java:272)
     at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
     at $Proxy36.getGreeting(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
     at $Proxy35.getGreeting(Unknown Source)
     at org.tempuri.WSHttpBinding_HelloClient.main(WSHttpBinding_HelloClient.java:96)
Caused by: weblogic.wsee.sender.api.PermanentSendException: javax.xml.ws.WebServiceException: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
     at weblogic.wsee.reliability2.store.SourceSequenceSender.checkForPermanentSendFailure(SourceSequenceSender.java:549)
     at weblogic.wsee.reliability2.store.SourceSequenceSender.handleFailureForSuspendedFiber(SourceSequenceSender.java:604)
     at weblogic.wsee.reliability2.store.SourceSequenceSender.sendRequestAndHandleResponseForSuspendedFiber(SourceSequenceSender.java:452)
     at weblogic.wsee.reliability2.store.SourceSequenceSender.sendRequestAndHandleResponse(SourceSequenceSender.java:293)
     at weblogic.wsee.reliability2.store.SourceSequenceSender.send(SourceSequenceSender.java:184)
     at weblogic.wsee.sender.DefaultProvider.Conversation.sendOneRequest(Conversation.java:671)
     at weblogic.wsee.sender.DefaultProvider.Conversation.sendPendingRequests(Conversation.java:579)
     at weblogic.wsee.sender.DefaultProvider.Conversation.access$1400(Conversation.java:44)
     at weblogic.wsee.sender.DefaultProvider.Conversation$2.timerExpired(Conversation.java:476)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused by: javax.xml.ws.WebServiceException: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
     at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:258)
     at com.sun.xml.ws.client.dispatch.DispatchImpl.invoke(DispatchImpl.java:273)
     at weblogic.wsee.reliability2.store.SourceSequenceSender.sendRequestAndHandleResponseForSuspendedFiber(SourceSequenceSender.java:442)
     ... 10 more
Caused by: SequenceFaultException: The value of wsrm:Identifier is not a known Sequence identifier.: uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-94bc5:13d3a6864db:-7ffe
     at weblogic.wsee.reliability2.tube.WsrmTubelineDeploymentListener$WsrmClientProtocolTube.processResponse(WsrmTubelineDeploymentListener.java:222)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:877)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
     at com.sun.xml.ws.client.Stub.process(Stub.java:272)
     at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:238)
     ... 12 more
<05-Mar-2013 14:57:58 o'clock EAT> <Error> <WseeRm> <BEA-224016> <An unexpected error occurred: weblogic.wsee.sender.api.ConversationNotFoundException: [WseeSender:221102]The conversation with the given name (uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd) could not be found.
weblogic.wsee.sender.api.ConversationNotFoundException: [WseeSender:221102]The conversation with the given name (uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd) could not be found.
     at weblogic.wsee.sender.DefaultProvider.DefaultSendingServiceProvider.getConversation(DefaultSendingServiceProvider.java:222)
     at weblogic.wsee.sender.DefaultProvider.DefaultSendingServiceProvider.stopConversation(DefaultSendingServiceProvider.java:287)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:257)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:30)
     at weblogic.wsee.reliability2.store.SequenceStore.removePhysicalStore(SequenceStore.java:109)
     at weblogic.wsee.persistence.LogicalStore.close(LogicalStore.java:955)
     at weblogic.wsee.persistence.LogicalStore.closeLogicalStores(LogicalStore.java:402)
     at weblogic.wsee.persistence.LogicalStore.closeStore(LogicalStore.java:384)
     at weblogic.wsee.persistence.LogicalStore.closeAllStores(LogicalStore.java:365)
     at weblogic.wsee.persistence.LogicalStore$1.run(LogicalStore.java:164)
>
<05-Mar-2013 14:57:58 o'clock EAT> <Error> <WseePersist> <BEA-221000> <An unexpected error occurred: java.lang.IllegalStateException: Attempt to remove listener from weblogic.wsee.reliability2.sequence.SourceSequence@79424b7b - uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd when it is not the master instance
java.lang.IllegalStateException: Attempt to remove listener from weblogic.wsee.reliability2.sequence.SourceSequence@79424b7b - uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-156fc54b:13d3a5dab50:-7ffd when it is not the master instance
     at weblogic.wsee.reliability2.sequence.Sequence.removePropertyChangeListener(Sequence.java:1250)
     at weblogic.wsee.reliability2.store.SequenceMap.shutdownSequence(SequenceMap.java:558)
     at weblogic.wsee.reliability2.store.TimedSequenceMap.shutdownSequence(TimedSequenceMap.java:182)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:274)
     at weblogic.wsee.reliability2.store.SourceSequenceMap.shutdownSequence(SourceSequenceMap.java:30)
     at weblogic.wsee.reliability2.store.SequenceStore.removePhysicalStore(SequenceStore.java:109)
     at weblogic.wsee.persistence.LogicalStore.close(LogicalStore.java:955)
     at weblogic.wsee.persistence.LogicalStore.closeLogicalStores(LogicalStore.java:402)
     at weblogic.wsee.persistence.LogicalStore.closeStore(LogicalStore.java:384)
     at weblogic.wsee.persistence.LogicalStore.closeAllStores(LogicalStore.java:365)
     at weblogic.wsee.persistence.LogicalStore$1.run(LogicalStore.java:164)
>
Process exited with exit code 1.Does anyone have any insight about this behaviour?
Thanks,
John

Some additional information for the second case. Using HTTP analyzer in JDeveloper, I can see 2 HTTP POSTs going to the web service. The first one is to initiate the WS-RM sequence and shows an offered conversation identifier and the reply shows that the server has given its own identifier instead of the offered one:
request:
POST http://xgis-lel-05717.ad.xglobal.com:80/WSReliablePOC/HelloService.svc HTTP/1.1
Proxy-Authorization:
Content-type: application/soap+xml;charset="utf-8";action="http://schemas.xmlsoap.org/ws/2005/02/rm/CreateSequence"
Accept: application/soap+xml, multipart/related, text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
User-Agent: Oracle JAX-WS 2.1.5
Host: xgis-lel-05717.ad.xglobal.com
Proxy-Connection: Keep-Alive
Content-Length: 1620
X-HTTPAnalyzer-Rules: 1@localhost:8099
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
    <env:Header>
        <wsa:Action xmlns:wsa="http://www.w3.org/2005/08/addressing" env:mustUnderstand="true">http://schemas.xmlsoap.org/ws/2005/02/rm/CreateSequence</wsa:Action>
        <wsa:MessageID xmlns:wsa="http://www.w3.org/2005/08/addressing">uuid:WLS1:WseeFileStore:3f3d2d8955322f32:201221c6:13d3a75f768:-7ffb</wsa:MessageID>
        <wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://xgis-lel-05717.ad.xglobal.com/WSReliablePOC/HelloService.svc</wsa:To>
        <ReplyTo xmlns="http://www.w3.org/2005/08/addressing">
            <Address>http://www.w3.org/2005/08/addressing/anonymous</Address>
        </ReplyTo>
        <FaultTo xmlns="http://www.w3.org/2005/08/addressing">
            <Address>http://www.w3.org/2005/08/addressing/anonymous</Address>
        </FaultTo>
    </env:Header>
    <env:Body xmlns:wsrm="http://schemas.xmlsoap.org/ws/2005/02/rm">
        <wsrm:CreateSequence>
            <wsrm:AcksTo xmlns:wsa="http://www.w3.org/2005/08/addressing">
                <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
                <wsa:ReferenceParameters xmlns:clspi="http://www.oracle.com/wsee/jaxws/cluster/spi">
                    <clspi:PhysicalStoreName
                        xmlns:wsa="http://www.w3.org/2005/08/addressing"
                        xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" wsa:IsReferenceParameter="true">WseeFileStore</clspi:PhysicalStoreName>
                </wsa:ReferenceParameters>
            </wsrm:AcksTo>
            <wsrm:Expires>P1D</wsrm:Expires>
            <wsrm:Offer>
                <wsrm:Identifier>uuid:WLS1:WseeFileStore:3f3d2d8955322f32:201221c6:13d3a75f768:-7ffe</wsrm:Identifier>
                <wsrm:Expires>P1D</wsrm:Expires>
            </wsrm:Offer>
        </wsrm:CreateSequence>
    </env:Body>
</env:Envelope>
reply:
HTTP/1.1 200 OK
Content-Type: application/soap+xml; charset=utf-8
Cache-Control: private
X-Powered-By: ASP.NET
X-AspNet-Version: 4.0.30319
Content-Length: 673
Server: Microsoft-IIS/7.5
Date: Tue, 05 Mar 2013 12:10:44 GMT
X-HTTPAnalyzer-RuleName: Pass through :
<?xml version="1.0" encoding="UTF-8"?>
<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing">
    <s:Header>
        <a:Action s:mustUnderstand="1">http://schemas.xmlsoap.org/ws/2005/02/rm/CreateSequenceResponse</a:Action>
        <a:RelatesTo>uuid:WLS1:WseeFileStore:3f3d2d8955322f32:201221c6:13d3a75f768:-7ffb</a:RelatesTo>
    </s:Header>
    <s:Body>
        <CreateSequenceResponse xmlns="http://schemas.xmlsoap.org/ws/2005/02/rm">
            <Identifier>urn:uuid:b6886ed1-6cf2-40a4-99a3-f17cc5a295d7</Identifier>
            <Expires>P1D</Expires>
            <Accept>
                <AcksTo>
                    <a:Address>http://xgis-lel-05717.ad.xglobal.com/WSReliablePOC/HelloService.svc</a:Address>
                </AcksTo>
            </Accept>
        </CreateSequenceResponse>
    </s:Body>
</s:Envelope>The second POST shows the JDeveloper proxy calling the web service and sending a wsrm:Identifier value that the one originally offered by JDeveloper (see the sequence acknowledgement), not the one the server advised to use:
request:
POST http://xgis-lel-05717.ad.xglobal.com:80/WSReliablePOC/HelloService.svc HTTP/1.1
Proxy-Authorization:
Content-type: application/soap+xml;charset="utf-8";action="http://tempuri.org/Hello/GetGreeting"
Accept: application/soap+xml, multipart/related, text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
User-Agent: Oracle JAX-WS 2.1.5
Host: xgis-lel-05717.ad.xglobal.com
Proxy-Connection: Keep-Alive
Content-Length: 1444
X-HTTPAnalyzer-Rules: 1@localhost:8099
<?xml version="1.0" encoding="UTF-8"?>
<S:Envelope xmlns:S="http://www.w3.org/2003/05/soap-envelope">
    <S:Header>
        <wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://xgis-lel-05717.ad.xglobal.com/WSReliablePOC/HelloService.svc</wsa:To>
        <wsa:Action xmlns:wsa="http://www.w3.org/2005/08/addressing">http://tempuri.org/Hello/GetGreeting</wsa:Action>
        <ReplyTo xmlns="http://www.w3.org/2005/08/addressing">
            <Address>http://www.w3.org/2005/08/addressing/anonymous</Address>
        </ReplyTo>
        <FaultTo xmlns="http://www.w3.org/2005/08/addressing">
            <Address>http://www.w3.org/2005/08/addressing/anonymous</Address>
        </FaultTo>
        <wsa:MessageID xmlns:wsa="http://www.w3.org/2005/08/addressing">uuid:WLS1:WseeFileStore:3f3d2d8955322f32:201221c6:13d3a75f768:-7ffc</wsa:MessageID>
        <wsrm:SequenceAcknowledgement xmlns:wsrm="http://schemas.xmlsoap.org/ws/2005/02/rm">
            <wsrm:Identifier>uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-725c9c83:13d3a75543c:-7ffe</wsrm:Identifier>
            <wsrm:AcknowledgementRange Lower="1" Upper="3"/>
        </wsrm:SequenceAcknowledgement>
        <wsrm:Sequence
            xmlns:wsrm="http://schemas.xmlsoap.org/ws/2005/02/rm" S:mustUnderstand="true">
            <wsrm:Identifier>urn:uuid:b6886ed1-6cf2-40a4-99a3-f17cc5a295d7</wsrm:Identifier>
            <wsrm:MessageNumber>1</wsrm:MessageNumber>
        </wsrm:Sequence>
    </S:Header>
    <S:Body>
        <GetGreeting
            xmlns:ns2="http://schemas.microsoft.com/2003/10/Serialization/" xmlns="http://tempuri.org/">
            <name>John</name>
        </GetGreeting>
    </S:Body>
</S:Envelope>
response:
HTTP/1.1 500 Internal Server Error
Content-Type: application/soap+xml; charset=utf-8
Cache-Control: private
X-Powered-By: ASP.NET
X-AspNet-Version: 4.0.30319
Content-Length: 710
Server: Microsoft-IIS/7.5
Date: Tue, 05 Mar 2013 12:10:52 GMT
X-HTTPAnalyzer-RuleName: Pass through :
<?xml version="1.0" encoding="UTF-8"?>
<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing">
    <s:Header>
        <a:Action s:mustUnderstand="1">http://www.w3.org/2005/08/addressing/soap/fault</a:Action>
    </s:Header>
    <s:Body>
        <s:Fault>
            <s:Code>
                <s:Value>s:Sender</s:Value>
                <s:Subcode>
                    <s:Value xmlns:a="http://schemas.xmlsoap.org/ws/2005/02/rm">a:UnknownSequence</s:Value>
                </s:Subcode>
            </s:Code>
            <s:Reason>
                <s:Text xml:lang="en-GB">The value of wsrm:Identifier is not a known Sequence identifier.</s:Text>
            </s:Reason>
            <s:Detail>
                <r:Identifier xmlns:r="http://schemas.xmlsoap.org/ws/2005/02/rm">uuid:WLS1:WseeFileStore:3f3d2d8955322f32:-725c9c83:13d3a75543c:-7ffe</r:Identifier>
            </s:Detail>
        </s:Fault>
    </s:Body>
</s:Envelope>This seems to be an issue in the JDev-generated Proxy (still need to find out why it happens "every other time" and not "every time." The time it works, JDeveloper is sending the Identifier returned by the service. The time it works, however - you can also see that the "conversation not found" exception is referring to the original "offered" identifier and not the one that was used in the conversation. I'm now starting to suspect that the proxy generation for WS-RM may be a bit buggy. Anyone else with experience in this area?
A quick look at support.oracle.com does find note 1082278.1 which although for old versions of WebLogic, that WS-RM isn't supported for JAX-WS in WLS, but is supported for JAX-RPC. Since this seems to be for publishing web services, it is not at all clear as to whether this applies to me. In any case, the JDeveloper WS proxy wizard won't let me generate a JAX-RPC proxy, instead saying that the WSDL has no SOAP 1.1 bindings (which is correct, it has SOAP 1.2 bindings).
John
John

BizTalk and Rfc

hi,
i am just starting working on Biztalk. i am folloing one help file. in that help file they said . copy the rfc in source folder of BizTalk. <b>But i do't know how to get rfc from sap system .</b>.can u pls help me .
regards
Guru

Hi,
You need to send the data from SAP to XI and from XI to Biztalk. While doing so, how can you get the data into Biztalk.
You can have following options to communicate with Biztalk from XI
1) Sending a xml file from XI to Biztalk Server.. then it picks up and it can process..
But it is not a synchronous...
2) If you want to make the synchrnous, then you need to have Webservice , which can be called from the XI...
Hope this helps,
REgards,
Moorthy

BizTalk and SQL Clustering

Hi,
I have following questions in clustering:
1. When we say BizTalk cluster. Does that mean that all the server nodes that participate will use the same SQL server cluster, SSO cluster?
2. In case of SQL Server cluster, one is active and one is passive. Will both the servers be replica of each other? I mean to ask will they have same data and configuration? If not then how will it work in a failover scenario because the passive
instance will not the all the information of Active instance?
3. Does a Single node of SQL Cluster includes MsgBox and ManagementDB or are they on different Server?
4. What is the ideal setup of Sql DB? Eg: a different for MsgBox, Management DB, SSO etc?
5. Also, as per my understanding, for high availabilty we should have a BizTalk cluster, Sql cluster and SSO cluster? Is that correct?
Thanks.

Cluster or Not, all BizTalk Servers are configured in the same group and use the Master SSO instance. Only in the case of a cluster the associated DB's are clustered. Does not really change anything w.r.t configuration of the BizTalk Group.
I would refer you to the following links
http://msdn.microsoft.com/en-us/library/aa373130(v=vs.85).aspx and
http://technet.microsoft.com/en-us/library/cc757731(v=ws.10).aspx to get a better understanding of clusters. Clusters in Microsoft are a shared resource so to answer your question, the passive node will (in case of failover) get access to the resources
which were with the active instance and thus no further configu sync is required. Its is the same information from the drives, master DB, services, registry which fails over onto the passive node.
How you utilize the two (or more) nodes of the cluster depends on the load you expect to handle. You may choose to split databases across the TWO nodes [called Active/Active in Microsoft parlance]. This way BOTH the nodes have to be licensed. Each BizTalk
Database has different needs w.r.t frequency of reads/writes, size, etc. The BizTalk Performance Optimization Guide @http://msdn.microsoft.com/en-us/library/ee377064.aspx in addition to best
Practices for Maintaining BizTalk Database @http://msdn.microsoft.com/en-us/library/gg634566.aspx should provide you with guidance on how to split the BizTalk Databases across multiple cluster
nodes.
I would like to provide you ONE configuration fits all BUT that is not possible. The setup of the SQL is highly dependant on the load you expect to address through BizTalk, the HA/DR consideration pertaining to availability/licensing, etc. In short it is
a topic for an infrastructure architect.
BizTalk Cluster is again a subject of requirement. There is no BizTalk Cluster per-se, BizTalk Services (BTSNTSvc.exe) can be clustered so implying that specific host instance can be clustered. As a rule one should only look at clustering those Receive
Protocols which need to be configured for availability. Examples would be FILE, FTP, even DB locations. IIS/Web Services provide HA + scalability through NLB. If you have a SQL Cluster then it is recomended to also cluster SSO on the same set of servers primarily
because it does not require additonal BizTalk Licensing.
Regards.

BizTalk and Azure

hi,
For one of our client we are designing an integration solution with BizTalk Server 2013 R2 and need help to design (with best
practices) corresponding into Azure.
Need help on what we need to consider while moving an existing application/infrastructure to Cloud.
Need help on which approach we should go with as IAAS or PAAS.
Regards, Amit More

HI Amit,
According to your description above, if you want to move an existing application/infrastructure to Azure, you need use IAAS, and you can consider using the Azure BizTalk service, or you can also use the server build-in Azure.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Biztalk and ddl from Oracle

I have a number of vendor databases with this same data in slightly different formats (some mssql 2008 som oracle 11g).
What i need to do is try to map from all these data sets to an authoritative one . For instance DataSet1 from MSSQL2008 might contain a Dr. billing number but the billing address is their home address not the clinic address which I would get from DataSet2
ona Oracle 11g data base for instance. Is there a way in biztalk to aggregate this data from these dispariate datasources and build an autoratative datasset in BT?
Currently I have all the relevant datasets defined in DMD format in Oracle SQl data modeler format is there a way to import that into BT and "link" the relevant fields?

What you need to do is to convert your DMD into an XSD. The common representation will become the "common" schema. You will use this to build the process/orchestration/action for handling th Data.
Then for every database you need to connect to, you will use the BizTalk Add Adapter Services (through VS) to generate DB instance specific schema. You will then create a MAP (for each unique instance) where you will map elements from the specific DB instance
into the "common" schema. You will then create One Receive Port will multiple receive locations (every time you use Add Adapter Services, BizTalk will generate a Binding file for you which can be used to create the receive ports/locations). The MAP will need
to be assigned to the Port.
So when BizTalk will get the data from the specific database, the XML will be matched to the appropriate MAP which will convert it into a standard (common) representation.
Regards.

Error in send port executed procedure in Biztalk and SQL Server

Hi,
I have a send port which call the below stored procedure
USE
GO
SET
ANSI_NULLS
ON
GO
SET
QUOTED_IDENTIFIER
ON
GO
ALTER
@ProcessId
VARCHAR
(100),
@FilePath
we are revieving the Error as below and the send port is getting suspended
System.Data.SqlClient.SqlException: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 2.
can anyone just help me with this?

Begin TRANSACTION
END TRY
BEGIN CATCH
BEGIN
ROLLBACK TRANSACTION ;
END
Exactly, you have a BEGIN TRANSACTION and a ROLLBACK in error case, but no COMMIT at all.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Urgent:What's the relation between WS-Reliability and WS-ReliableMessaging

Thank you!

Hi Justin,
In the AFKO (type 30 for PM order), the fields AUFNT & APLZT refer the assigned PS activity. This relation is not stored at PS activity (at least not in database), since multple PM orders can assigned to the same PS activity.
A PS activity can NOT be a subitem of maintenace (PM) order, if in the database has such constellation, it is an error.
Please reward, wenn the information is useful.
Kind regards,
Zhenbo

AS2 ID and URL in BizTalk Server 2009

Hi Everyone,
I am new to BizTalk and have some very basic understanding of what it does. My client wants to send and receive EDIFACT files over AS2 protocol and they have asked for our AS2 ID, AS2 URL and certificate(public if I am right). Please find my understanding below
about these and correct me if anything goes wrong
1. AS2 ID - Not sure where and how to create AS2 ID
2. AS2 URL - I have created a virtual directory[AS2] in IIS to receive files from client [Path mapped to C:\Program Files\Microsoft BizTalk Server 2009\HttpReceive] and the URL obtained is http:\\<ip_addr>\as2
3. Certificate - Certificate is generated with 1 year validity using Certificate authority services in windows server 2003 and exported with [Do not export private key] option
Is the above AS2 URL correct to share with the client?Is the certificate generated is valid to share?
And please tell me how to create AS2 ID
Platform details:
1. Windows Server 2003
2. BizTalk 2009 with SQL Server 2005 Standard Edition [SP2]
Any help on this is highly appreciated.
Thanks in advance
Jose

Jose,
For your Requirement, you need to provide the below to the customer to establish the AS2 communication.
1) Party - You need to create a Party in the console in your own and also you need to specify the thumbprint of your certificates..
Refer the
msdn for configuring which would help you in configuring.
2) You need to make sure your client allows your server (IP - Not white listed) to access their firewall when you are sending the message.
3) You need to make sure that your server is made accessible to your customer server to send the files.
4) You need to have the Partner ID of your customer and configure a Party with the Certificate Details for receiving the files from Customer.
5) you need to provide the your certificates (Public) to your customer and you need to have the customer's certificate in your store as well.
Hope this helps, also you can configure lot of details (MDN req or not) in the Parties that is created for your customer.
Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

What are the supported secure protocols between BizTalk 2013 R2 and Iguana HL7 interface

We are working on project where we want to transmit HL7 messages securely from BizTalk 2013 R2 to Iguana HL7 interface and receive Acks/Nacks. We came to know that MLLP adapter doesn't support SSL and the other option we are thinking
is HTTPS. Are there any better options available other than these 2 options which are supported by both BizTalk and iguana.
Also I read the following article
http://help.interfaceware.com/kb/164

Have you gone through above post .It clearly state
ACK’s are published when the Messaging Engine successfully transmits a message over the ‘wire’ and the system context property “AckRequired” is written on the message that was sent and it is set to true.
Both ACK’s and NACK’s have the following system context properties promoted which can therefore be used in filter expressions for routing:
AckType:
set to ACK or NACK
AckID:
set to the message ID of the message that this ACK/NACK is for
AckOwnerID:
set to the instance ID that this ACK/NACK is for
CorrelationToken:
flowed from the message to the ACK/NACK
I would again suggest to go through below link to design your solution
http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
Thanks
Abhishek

Element is not declared error both in BizTalk 2013 and AX 2012 R2

Hi:
We continue getting “element is not declared” in BizTalk and AX.
Appreciate any help and hints.
Regards, Toraj
Background:
We have BizTalk 2013 and AX2012 R2.
From BizTalk Suspended Job
System.ServiceModel.FaultException: <s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing"><s:Header><a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/dynamics/2008/01/services/PurchaseInvoiceService/createAifFaultFault</a:Action><a:RelatesTo>urn:uuid:ddd18935-18a7-415d-bbbf-38e4b9a08bf7</a:RelatesTo><a:To s:mustUnderstand="1">http://www.w3.org/2005/08/addressing/anonymous</a:To></s:Header><s:Body><s:Fault><s:Code><s:Value>s:Sender</s:Value></s:Code><s:Reason>
<s:Text xml:lang="en-US">Invalid document schema. The following error was returned:
The 'http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice:LedgerJournalTable' element is not declared.</s:Text>
</s:Reason><s:Detail><AifFault xmlns="http://schemas.microsoft.com/dynamics/2008/01/documents/Fault"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><CustomDetailXml i:nil="true"></CustomDetailXml><FaultMessageListArray i:nil="true"></FaultMessageListArray><InfologMessageList
From AX Exception Log
The 'http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice:LedgerJournalTable' element is not declared.
The BizTalk WCF-NetTcp > Configuration > Action as follows. Which matches the published WSDL
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="create" Action="http://schemas.microsoft.com/dynamics/2008/01/services/PurchaseInvoiceService/create" />
</BtsActionMapping>
The following is the XML from BizTalk to AX. I deleted some of the data to shorten the xml.
<ns1:PurchaseInvoice xmlns:ns1="http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice" xmlns:ns0="http://schemas.microsoft.com/dynamics/2008/01/sharedtypes">
<ns1:LedgerJournalTable action="create">
<ns1:_DocumentHash>45f5770e-0ee5-496c-a290-176a16e78b7c</ns1:_DocumentHash>
<ns1:Approver>0</ns1:Approver>
<ns1:BankAccountId>0</ns1:BankAccountId>
<ns1:BankRemittanceType>None</ns1:BankRemittanceType>
<ns1:CurrencyCode>USD</ns1:CurrencyCode>
<ns1:CurrentOperationsTax>Current</ns1:CurrentOperationsTax>
<ns1:CustVendNegInstProtestProcess>OpenPaym</ns1:CustVendNegInstProtestProcess>
<ns1:DefaultDimension>
<ns0:Values><ns0:Value>
<ns0:Name></ns0:Name>
<ns0:Value>0</ns0:Value>
</ns0:Value></ns0:Values>
</ns1:DefaultDimension>
<ns1:DetailSummaryPosting>Detail</ns1:DetailSummaryPosting>
<ns1:DocumentNum>P049368</ns1:DocumentNum>
<ns1:EndBalance>0.00</ns1:EndBalance>
<ns1:ExchRate>0.00</ns1:ExchRate>
<ns1:ExchrateSecondary>0.00</ns1:ExchrateSecondary>
<ns1:FixedExchRate>Yes</ns1:FixedExchRate>
<ns1:FixedOffsetAccount>Yes</ns1:FixedOffsetAccount>
<ns1:GroupBlockId>
</ns1:GroupBlockId>
<ns1:InUseBy></ns1:InUseBy>
<ns1:JournalBalance>1573.91</ns1:JournalBalance>
<ns1:JournalName>APINV</ns1:JournalName><ns1:JournalTotalDebit>1573.91</ns1:JournalTotalDebit>
<ns1:LedgerJournalTrans>
<ns1:CurrencyCode>... LedgerJournalTrans Deleted for Simplicitsy </ns1:CurrencyCode>
</ns1:LedgerJournalTrans>
<ns1:DocuRefTable />
<ns1:LedgerJournalTable_W />
</ns1:LedgerJournalTable>
</ns1:PurchaseInvoice>
Toraj [email protected]

Hi:
After working on this off and on for a few weeks,
I just posted the following Technical Blog / article for solution. Happy reading.
BizTalk 2013 and AX2012 R2 Receive Services Interface -
http://torajkhavari.blogspot.com/2015/01/title-biztalk2013-and-ax2012-r2-receive.html
Regards,Toraj
Toraj [email protected]

Biztalk PGP encryption and signing

Hi,
Currently i am working on a custom pipeline component to PGP encrypt and sign the outgoing message from Biztalk 2013 with public and private keys.
I am referring the content mentioned in the below posts
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
http://bajwork.blogspot.co.nz/2007/08/pgp-pipeline-component.html
But we have a requirement to use PGP version 6.5.8 and i could not find what PGP versions the above components supports.
Any one has any idea about Biztalk and PGP version 6.5.8 for encryption and signing?
Thanks
JB

PGP has different versions and 6.5.8 is older one. If just download the Bouncy castle pgp dll, it’s not going to use the 6.5.8 version of PGP.
http://www.pgpi.org/products/pgp/versions/freeware/win32/6.5.8/
With latest Bouncy castle pgp dll, there are few issues encountered by the user you tried to use PGP version 6.5.8, especially around signature validation. Following are the discussion on
the issues faced..
http://stackoverflow.com/questions/7193323/encrypt-with-bc-and-decrypt-with-pgp-6-5-8
http://bouncy-castle.1462172.n4.nabble.com/ERROR-encrypted-session-key-is-bad-when-trying-to-decrypt-td1466221.html
http://bouncy-castle.1462172.n4.nabble.com/Compatibility-Issue-with-PGP-6-5-8-td1467170.html
People have manage to get it working with few changes to the PGP code (which you can get it here
http://www.bouncycastle.org/csharp/index.html )
This forum is not the right place to raise question about finding the Bouncy castle pgp dll version compactable with v6.5.8. try to post this question here
http://bouncy-castle.1462172.n4.nabble.com/
Once you have their dll compactable with v 6.5.8, then you can use it in BizTalk suggested by the links referenced by you.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Anybody experience with SAP Reliable Messaging (SAP-RM) from BizTalk?

Experience with SAP Reliable Messaging (SAP-RM) from BizTalk?
Has anyone experience with using SAP Reliable Messaging (SAP-RM) between BizTalk and SAP’s Enterprise Services?
SAP’s Enterprise Services can be synchronous request/reply, what SAP calls A2X. But many of SAP’s Enterprise Services are one-way, asynchronous. When not using SAP’s own integration solution (SAP Process Integration), SAP refers
to the use of either WS-ReliableMessaging (WS-RM) or SAP ReliableMessaging (SAP-RM). With BizTalk not supporting WS-ReliableMessaging (and not its persistent version), SAP-RM is the way to go.
More info about “SAP-RM” @ http://wiki.scn.sap.com/wiki/display/ABAPConn/Plain+SOAP
Koen

I have searched, but didn't find any resources related with SAP Reliable Messaging (SAP-RM) from BizTalk, only found the resources about Web Services Reliable Messaging. I hope it will help you.
http://help.sap.com/saphelp_nw04s/helpdata/en/46/9743916d1115ece10000000a114a6b/content.htm
http://integr8consulting.blogspot.in/2013/11/ws-reliablemessaging-ws-rm-between-ibm.html
http://scn.sap.com/thread/798701

BizTalk exposed WCF 403 - Forbidden: Access is denied WCF

Im using BizTalk server 2010.cretaed Certificate in IIS and shared to client the same as a public cert.
Im using httpsTransport with customBinding.followed below url
http://blogs.msdn.com/b/bizintegration1/archive/2011/08/23/exposing-biztalk-orchestration-as-a-wcf-service-over-ssl.aspx
When I try to Browse in BizTalk server with https, im able to browse, but in the client side, they are not able to browse
and they get "403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied." Is there anythng that needs to be set in BizTalk or the settings should be done at the client end?
IIS autehntification mode is anonymous is configued.plz let me know anything to do in biztalk and IIS level
Regards BizTalkWorship

This is because your client has not provided the certificate while browsing the service URL.
If they (client) have installed the certificate in correct folder and then while browsing folder the service, client should provide the certificate through browser.
For Internet Explorer, a pop-up should with all the certificates
installed in their personal store. They need to select the certificate that they already installed in it.
Look into this article (from
On the client side: section onwards) for how to browse the service from IE by providing the certificate.
http://blogs.msdn.com/b/asiatech/archive/2014/02/13/how-to-configure-iis-client-certificate-mapping-authentication-for-iis7.aspx
Note: Above article is just relavant to you from
On the client side: section onwards i.e for instructing your client to use certificate while browsing.
FireFox
You will get an error that says “HTTP Error 403.7 – Forbidden” “The page you are attempting to access requires your browser to have a Secure Sockets Layer (SSL)
client certificate that the Web server recognizes.”
In
FireFox go to Tools –> Options –> Advanced –> Encryption –> View Certificates
Click import and select the certificate with private key file you exported earlier (the .pfx file)
You will need to clear history now or restart browser
Just FYI for installing certifate correctly in client side, if they use Windows (off-course):
MMC, add certificate snap-in for “current user”
Browse to Certificates (Current User) –> Personal –> Certificates
Right click this node and select All Tasks and Import from the popup menu
Follow the steps in the wizard, selecting the public certificate you have shared o client.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk and Ws-ReliableMessaging

Similar Messages

Maybe you are looking for