Blackberry 8100/8110 Red Light Flashing

It seems this is a common problem.
I loaded my Pearl 8110 or 8100 with a sh**load of music, pics & videos.
when i went to access them, play them or slideshow them, I noticed it took forever...attempting to ease the memory load on my phone, i started deleting, from the phone itself (not while connected via USB), songs, pictures, folders thereof, etc.
then it died.
and it wouldnt re-start. pulled the battery, tried to sync it, tried to update, tried everything...the computer WONT read the phone...the update keeps getting stuck on re-initailization and when i finally cancel, it says "UNABLE TO UPDATE USING A MULTI-STAGE UPLOAD" or something like that.  it's almost as if the usb port got fried...it momentarily connects when the red light flashes on, then disconnects when the red light flashes off.
i've read thru 3-4 pages of posts on this without any hope in sight.
is it futile?  or is there something i havent tried?
--- 707rider

I posted this message here:
http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Phone-stuck-on-connecting-to...
This was my post:
This website has a good solution. It seems to work for most people. My 8100 wasn't nuked, but I needed to reinstall the OS. I followed his instructions and it worked.
I don't know if we're allowed to post links on this forum, but I'll try. If it doesn't allow the link, then Google "crackberry reload operating system nuked blackberry" and it should be the first link. Just look for the crackberry site.
Here's the link (hopefully):
http://crackberry.com/blackberry-101-lecture-12-ho​w-reload-operating-system-nuked-blackberry

Similar Messages

  • Red Light flashing help

    Hi, I have recently got a curve and after loading the pc software & connected my blackberry to it, it updated etc then my phone went blank and has 2 blinking red lights flashing...anyone know how I can reset phone thanks

    Hi..
    Try the below link for the OS downloads..
    https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html
    thanks..
    Please update the result after applied..
    Thanks

  • Q10 has locked me out completely. Won't turn on but red light flashing to specific pattern

    Help! Turned my Q10 off yesterday to reset as emails not getting through. Now won't turn back on - just a little red light flashing at top right of device in a specific pattern. Nightmare-any ideas??

    Connect your Q10 to the known working OEM wall outlet charger.
    After being connected several minutes, LEAVE it connected and remove the battery a minute, and reinsert... does it reboot?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Black screen, red light flashing

    I was downloading an app when a screen message told me to restart to continue installation. I pressed the Off button but now, despite pressing the start button, the phone will not come alive, although it was recently charged. There is just a black screen and the small red light flashes occasionally.
    Solved!
    Go to Solution.

    Hi HarryTyrrell
    Welcome to BlackBerry Support Community Forums
    Pressing the Off Button is not the Correct way to restart our BlackBerry device, please perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot. See if that helps.
    If not then try Starting your device On Safe Mode and on Safe Mode Uninstall the Application your Downloaded recently or which you think is responsible for that.
    KB17877  How to start a BlackBerry smartphone in Safe Mode
    Try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • 8700 will not start,red light flashes and hourglass comes on and off

    I have an 8700g Blackberry phone and I mistakenly downloaded an application that is only supported by software version 4.0 or greater. ( my phone had software version 2.2? ) . I had to replace the battery today and when I put in the new battery, it tried to start up but the red light comes on and the hourglass flashes on and off but after two hours it will still not start up. What should I do?

    Kendal wrote:
    Hi there,
    My bb did the same thing, but when i did what you said, the app loader said that there is a fatal error, and that the code is [A:0x0000000E]; and a red light flashes twice in quick succssion on the bb, can you please help me out here? thanks K.P. :-)
    Hi and Welcome to the Community!
    Hmmm...that sounds very bad. But, let's try some things anyway...a total wipe and reload, using one of the following utilities:
    http://forums.crackberry.com/forum-f3/how-wipe-jl_cmder-53502/
    www.bbsak.org
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Phone wont turn on and red light flashing 5 times with pause/s in between

    i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
    Message Edited by SgtAssassin on 10-11-2009 05:22 AM

    Hi and Welcome to the Community!
    Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Won't boot only red light flashing

    My BB Z10 unable to boot or charge once the battery all used up.
    When I plug to wall or PC, only red light flashing.
    Sent for repair twice, just return with a full charged battery device.
    Once I used all the battery it won't charge.
    I have to recharge the battery before it's all gone,
    Or you have to follow the steps to reinstall the OS make it charge again.
    Does it make sense? Will you accept that?
    Means if I did not charge my Z10 before battery all gone, I have to do the OS recovery and ALL THE DATA GONE.

    Hey panda1111,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps below to try and bring the BlackBerry Z10 back to life:
    Ensure that BlackBerry Link is installed on the PC or Mac OS
    Ensure the computer has an internet connection.
    Launch the BlackBerry Link Software.
    Note: A backup of the BlackBerry device should be tried before a reload.
    Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
    Connect the BlackBerry device to the computer.
    When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
    If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device.  Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
    If the issue still persists, then I suggest contacting your network service provider for repair options. 
    Let me know if you have any more questions.
    Cheers.
    VIA | ViciousFerret
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

    trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
    This question was solved.
    View Solution.

    You can try removing and reseating the memory and see if that works.
    If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

  • HP desktop won't start, red light flashing and beeping, loud fan

    Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
    It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
    Any help? Thanks.

    Hi
    I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Desktop Computer dc5750 shuts down and red light flashes on front of computer and won't start at all

    I have a DC5750 HP Compaq Computer it is 6 years old, but I have 4GB Ram, Nvidia GS8400 Graphics Card, two one TB Hard Drives. While I tried to re-installed my operating systems it all of a sudden shut down not once but twice, I opened up the side of the computer and found that it was hotter then normal. I let it sit for a while thinking it maybe over heating after hooking it back up I turned it on again nothing happened except a beeping noise and red lights flashing on the front. Can this be fixed as money is an issue.
    Thanks
    Rob

    Hi, Rob:
    Please review Appendix A. starting on page 56 of the Troubleshooting Guide at the link below to interpret the beep codes and see the probable causes and recommended troubleshooting steps.
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.BINARYPORTLET/public/kb/docDisplay/resource.proc​...

  • My blackberry z30 does not turn on with red light flashing

    hi i have a blackberry z30 , after charging my blackberry z30 it does not turn on and show me a red light blinking 5 times...what i should do? please help. 

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):Connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesHold the up/down volume keys until the device is fully powered offWait 15 minutesPower up normallyWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs. If it fails, then please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours. If it fails to help, then your next step is in-person evaluation by a qualified technician. If you remain in warranty, seek support under those terms. If you have no warranty, then seek out a local (to you) shop with a qualified technician and have them provide you with a proper evaluation and estimate.
    Good luck and let us know!

  • Blackberry Keeps Rebooting a little then stops red light flashs then reboots again.

    Hi.
    My blackberry Curve ran out of charge whilst I was a college I went home and charged it. it was fine, Went to the gym and it ran out of battery again. (That day it ran out of charge really quickly) Anyways I get home to charge it and it wouldnt charge, so I took the battery out and now everytime i put the battery in it it Reboots itself the bar moves up like 1cm then the screen goes black and the red light comes on, the red light goes off then its reboots itself back to 1cm and repeats this, Ive tryed to use a different battery but the same happens and I cant connect it to my computer as it just turns off and Ive not even had the phone for a year.

    Please help!!!!! my sons blackberry keeps rebooting itself then as it is nearly done it starts again, please can someone help maybe it needs a software upgrade how can one do this when the ph not even coming on

  • Q10 won't boot! only red light flashing.

    my phone suddenly wont respond when i was trying to open a bbm, so, i restarted the handheld. however, it wont turn on anymore. try to put off the batt, and put it back again, still won't to boot. it only does flashing the red light. i've tried to reload the software through bb link, and it has done nothing. anyone exprience the same trouble as mine? please..help me. thank you

    Hey panda1111,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps below to try and bring the BlackBerry Z10 back to life:
    Ensure that BlackBerry Link is installed on the PC or Mac OS
    Ensure the computer has an internet connection.
    Launch the BlackBerry Link Software.
    Note: A backup of the BlackBerry device should be tried before a reload.
    Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
    Connect the BlackBerry device to the computer.
    When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
    If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device.  Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
    If the issue still persists, then I suggest contacting your network service provider for repair options. 
    Let me know if you have any more questions.
    Cheers.
    VIA | ViciousFerret
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Playbook two red light flashes

    I was using my PlayBook today and all of a sudden while multitasking I noticed that the icons under the 'All' and 'Media'  menu had disappeared. I closed all the applications, put it to sleep and re-opened, locked/unlocked nothing worked. Thats when I decided to do a restart thinking that would fix it. 
    Upon restart I noticed the PlayBook wouldn't turn on and just two red lights would flash then stop. I held power button for 10 seconds no luck. I tried again holding power button plus the plus/minus volume keys again to no avail. I tried plugging it into a wall to see if it would work, again nothing.
    I decided to plug it into my computer to see if that would fix. It booted up and said wait for PlayBook to turn on or reset I pressed OK and it immediatly asked to download OS. Now I reloaded my OS and its working again.
    But what in the world caused this kind of crash to happen?? I was Web browsing and had appworld and facebook open.
    Solved!
    Go to Solution.

    With out any logs before the restore there is no way to tell what happened.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Maybe you are looking for