Blank recordable CD not recognized by Audition

I have a project that I'm trying to burn onto a CD, but whenever I insert a CD and try and burn it, I get a notice saying that "no media was found in the device."
I've tried using about 3 different CDs, and my computer is capable of both reading and burning CDs using other programs, so I know that the computer is capable of burning CDs.
Any help would be much appreciated.

I found some information about people experiencing similar issues with the HL-DL-ST drive at http://forums.support.roxio.com/topic/91135-nxt-pro-2-not-recognizing-disc-in-drive/ and similar reports in general with the Dell XPS 8700. I'm still researching what might be happening, or if these drives may be using a new driver model that may not be supported by the CD Burning engine licensed in Audition. As soon as I have more information, I'll follow-up.

Similar Messages

MacBook Pro running Leopard has suddenly thinks audio CDs are blank. Also not recognized in Itunes.

MacBook Pro running Leopard has suddenly thinks audio CDs are blank. Also not recognized in Itunes. What should I do to determine whether it's a hardware or software problem? Or is there something unusual about these CDs?

I have the exact same issue.DVD's work perfectly, but audio cd's have stopped working. I think it's pretty recent, but can't confirm it because i don't use audio cd's daily. So I think it might be software related instead of hardware related. I Have a Macbook pro 15" mid 2009 running the latest OSX release.

Blank Audio CD not recognized as Audio only as Data CD

Have recorded many audio CD's using iTones. All of the sudden when I put a new blank audio CD in it mounts as untitled CD or data CD. Have tried 5 new blank audio CD's. iTones will not let me burn it. Have a Sony Music CD recorder and put the blank CD in and it shows recordable. This started with 10.5.7 just within the last week so I installed 10.5.8. Same results. Also inserted a recorded Audio CD and it mounts correctly. Any suggestions.
Thanks,
Hal B

skottish wrote:Sorry tuddy, I was really tired when I responded to your post and missed some (most?) of the details. Ripping apps should find the discs without any extra software. Put an audio CD in the tray, wait a seconds, and run 'dmesg | tail' from a terminal and see what kind of output you get.
Don't sweat it, skottish. I didn't think of looking at the kernel message until you mentioned it. Something definetely doesn't look right here. I also failed to mention some other information. I have a cd-writer and dvd-writer on the same IDE channel and if I put an audio cd into the old cd-writer then asunder can see that drive and it works. Problem is that it's old and slow. I know the DVD drive works, I just verified it under another operating system that shall remain nameless. Please advise.
#before audio cd is inserted
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
eth0: no IPv6 routers present
#after audio cd is inserted
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
end_request: I/O error, dev sr1, sector 0

Condition Record (NACR) not recognized - why ?

Hi everybody,
for my custom output type ZALE - concerned with IDoc triggering - I have defined to condition records,
ZECO - eCommerce Order and
ZECR - eCommerce return
for the purpose to automatically generate output events, when the corresponding document types change.
Things are working fine. However not 100%.
In tcode VA02, in output control (menu option "Extras" / "Output" / "Edit"), the two document types (ZECO and ZECR) behave different:
- for ZECO, the system automatically proposes a new ZALE output record
- for ZECR, there is no automatically proposed ZALE output record !!!
Any idea, why this different behavior for identical customizing?
Thanks in advance for enlightment.
Best Regards
Gregor

Hi,
just to clarify:
- the setup as such is working - I can manually assign the ZALE output type, save and generate the IDOC
- what's not working is automatical proposal of the ZALE output type - supposed to work on behalf of the defined condition record
Another hint, -playing a bit with the document types, I found out
- ZECO can be created from scratch
- ZECR requires a reference for creation
My suspition: different setup of the document types also influences the output control!?
Thanks and Regards
Gregor

Recorded DVD not recognized in drive

I inserted a recorded DVD (DVD+RW) in my buddy's MacBook running Tiger, and a dialog box says the disc is a blank disc. It isn't, because it plays in other Macs, PC's and DVD players. is there a special setting he should be using to be able to play this DVD?
TIA

Go out and buy an external hard drive known to boot that kind of Mac.
Run the operating system installer that came with the machine and install on that hard drive after formatting it GUID with Disk Utility's Partition section.
After installing the operating system on that drive, select it from Apple menu -> System Preferences -> Startup Disc and click on restart.
Insert the dodgy DVD+RW.
If it fails to work, you know the optical drive is the one that won't play those kinds of discs, or it is damaged.

My Sony Dvd recorder is not recognized

Since I downloaded iMovie 09 I can get it to read my videos off of my Sony dvd camcorder. iMovie 08 worked well with the Sony but now I can't upload videos. Am I doing something wrong or is iMovie 09
not compatable

I have similar problem with Sony dvd 505E, Imovie09 will not import files, says they are not readable,however Iphoto is able to read from same Handycam the still pictures stored on the memory stick. This Sony handycam, using same USB connection, has no problem importing movies into Windows PC but i would like to edit in Imovie09.

How to load photos on Desktop to CD-R. When I high light photos and insert blank disk when instructed, Nothing happens and eventually I'M told the CD-R is not recognized

How to load photos on desktop to Recordable CD-R ? When I high light photos on desktop , click burn to disk and insert CD-R (when instructed ) nothing happens I eventually I get a box informing me the disk is not recognized. I' attempting to record 58MB of photos onto a blank 700 MB CD-R disk

Hi aidenpt23,
Welcome to the Support Communities!
The articles below may be able to help you with this.
OS X Lion: Burn a CD or DVD in the Finder
http://support.apple.com/kb/PH3807
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801#
Cheers,
- Judy

Installation Failure: Audition 3 disk not recognized

When I place the Audition 3 disk into my CD/DVD drive to install, it whirrs a bit then...nothing.
When I look at the CD/DVD drive using windows explorer it displays a file view of D: (my CD/DVD drive) with nothing in its file listing. The view of the listing of files thats supposed to be on the CD is a complete blank. I have View hidden files in XP turned on.
My system:
Cd/DVD drive by Memorex dvd 16+ dl4rwid2. Drivers are up to date
Win XP Sp3
I've tried placing the media in my laptop and it reads the disk ok (but that's a vista machine). So I know the Audition 3 disk seems to be ok.
Coming back to the XP machine, I have successfully installed many other programs INCLUDING Photoshop, and just yesterday: Illustrator -- all from the same drive. Audio CDs and Video DVDs play no problem. As a matter of fact, I have been able to install the Loopology disk in the Audition 3 package! I've called Adobe support -- they were a big help: "talk to the hardware manufacturer". Sheesh.
I've even tried to copy the contents of the Audition 3 disk to the desktop usig the DOS prompt but it returns and error "the device is not ready". That's the same error you'd expect to see if there was no media in the drive. So it seems like the system does not recognize the Audition 3 installation disk at all.
The Audition 3 installation disk is the ONLY disk my system has EVER not been able to read.
Has anyone else seen this installation behavior with the Memorex dvd 16+ dl4rwid2?
Any ideas on how to fix this?
Thanks for the help.
Mark

Here is how I solved this. It was really quite simple once I thought through the problem.
I took the disk to my laptop (which could recognize the disk, but where I did not want to install the app) and copied all the files into a subdir (called it TEMP) on the Laptops desktop. (the disk buzzed/vibrated more than usual during this task, so I guess it was out of balance. That's why it probably failed in my desktop drive)
Anyway, I then burned the files in the Temp subdir to a blank CD on the laptop...took the newly created CD over to the desktop machine (that was not recognizing the original Audition 3 disk), put the newly created CD into its the desktops drive, and poof...it worked! Installation proceeded normally with the newly created CD.
Cheers!
Mark

I have iMovie 09 and have successfully used an older Sony Handycam to directly capture and record. Now I have a Sony HDR-PJ230 and it is not recognized. Do I need to upgrade to iMovie 11 or ???

Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???

Hi jcm2656,
iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
iMovie '09: Camcorder Support
http://support.apple.com/kb/HT3290#1
iMovie ’11 however, does support it. See this article -
Apple - iLife '11 Help - iMovie ’11 Supported Cameras
http://help.apple.com/imovie/cameras/en/index.html
Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
Thanks for using Apple Support Communities.
Best,
Brett L

DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

Open Script Record Error - Browser is not recognized or recorded by tool

Hi,
I have installed the trial version of OpenScript 9.0 for performing R & D Activities in various features of it.
The installation was completed successful. But when I click “Record” button the browser gets launched. But when I type the URL and navigate on the browser it is not recognized or recorded by the tool. Please help me on this.
Regards
Shan

Hi,
- maybe try to reinstal openscript ?
- you have any messages in Console that could help ?
- nothing recorded at all in Run ?
because for me it worked nice on first shot with IE on :
- xp sp3
- xp sp3 VM remote
- vista
i did not try FF.
Michael.

TS1538 iPod Touch with blank screen that doesn't shut off and not recognized by iTunes?

I opened the app "MyTown 2", and it stayed on the opening screen for about 5 minutes - WAYYY too long! So I tried to close the app. A slight grayscale sort of film "slid" down over the opening screen, and then it went to this light gray, completely blank screen. It's been that way for over an hour - no matter what I do, can't do a hard shut down, and the device is not recognized by iTunes at all. It's completely DEAD!!!! Is there any hope? Anyone have a clue?

Following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPod Touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

XL Reporter Do Not Display Blank Records

hey all,
I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02. However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account. Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected? Is this a bug?
thanks in advance!
Kevin Lee

Hi Kevin,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
Bugs should anyway be reported to SAP Support!
HTH
Frank

ORA-20212: Active audit detail record does not exist

Hi All,
While Executing the process flow using Scheduler,we got this error
"ORA-20212: Active audit detail record does not exist, cannot update audit counts.
ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 2173
ORA-06512: at "XXOWB.WB_RT_MAPAUDIT", line 3108
ORA-06512: at "APPS.Test_MAP", line 3304
ORA-06512: at "APPS.Test__MAP", line 9341
ORA-06512: at line 1
I Will test the Mapping my running directly from Control center and then in database.
Cheers
Nawneet

Donot know the exact reason but when check the alert log found the error
ORA-1653: unable to extend table
and after allocating space the error was gone..
Cheers
Nawneet

Item level pricing condition record is not getting recognized

Hi,
In our scenario we have to maintain the additional charges based on Plant. For this purpose I have created the condition table 900 which contains the following fields
Sales Org/Dist Chal/Divi./Plant
I have maintained the condition record for the table, Which has been downloaded to CRM successfully.
When I create the order in CRM price of the product is getting recognized where as additional charges condition records are not getting recognized.
When I check the Access I found that header level data .i.e. sales org/dist chal / divion has been recognized and plant has not been recognized that values are like this 00000000000000000000000000
I have checked the plant it has been downloaded successfully to CRM
So, can anybody help me out?
Thanks

Hi,
Check in the access sequnce exclusive indicator activation, it might be selected to the previous Condition Tables, if it is selected than system will not check further available/maintained condition reocrds.
Regards
Naren..

Blank recordable CD not recognized by Audition

Similar Messages

Maybe you are looking for